Scribd
Upload
525 views1 page

Innoplus

This document provides information on InnoPlus HD6200B and HD6600B high density polyethylene resins for blow molding applications. The resins offer a balance of processability, environmental stress cracking resistance, and impact strength. They are suitable for small to medium containers and applications requiring high to normal ESCR. Typical properties include a melt flow rate of 0.45-0.40 g/10min, density of 0.962-0.957 g/cm3, and notched Izod impact strength of 12-15 kg.cm/cm. The resins comply with FDA regulations for food contact.

Uploaded by

Rizaldi Nur Imani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
525 views1 page

Innoplus

This document provides information on InnoPlus HD6200B and HD6600B high density polyethylene resins for blow molding applications. The resins offer a balance of processability, environmental stress cracking resistance, and impact strength. They are suitable for small to medium containers and applications requiring high to normal ESCR. Typical properties include a melt flow rate of 0.45-0.40 g/10min, density of 0.962-0.957 g/cm3, and notched Izod impact strength of 12-15 kg.cm/cm. The resins comply with FDA regulations for food contact.

Uploaded by

Rizaldi Nur Imani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HD6200B / HD6600B

High Density Polyethylene Resin


Product Description

.
InnoPlus HD6200B and HD6600B are high density polyethylene blow molding grade with optimum balance of processability,

LC
environmental stress cracking resistance (ESCR) and impact strength. They are used for wide variety blow molding
applications of small to medium size container and multi use grade from high ESCR to normal ESCR.
Typical Application : Personal care containers, Cosmetic containers, Detergent containers, Lubricant oil containers

P
Typical Properties :

NS
Properties Typical Value Unit Test Method
HD6200B HD6600B

TIO
Physical Properties
Melt Flow Rate (190 oC, 2.16 kg) 0.45 0.40 g/10 min ASTM D1238
Density C 0.962 0.957 g/cm3 ASTM D1505
Vicat Softening Point @ 10 N, 50 oC/hr 125 125 o
C ASTM D1525
NE
Melting Point 131 133 o
C ASTM D2117
Mechanical Properties
ON

Tensile Strength @ Yield 330 320 kg/cm2 ASTM D638


Tensile Strength @ Break 350 400 kg/cm2 ASTM D638
Elongation @ Break 1000 1000 % ASTM D638
C

Stiffness 10000 10000 kg/cm2 ASTM D747


AL

Flexural Modulus 15000 14000 kg/cm2 ASTM D790


Notched Izod Impact Strength 12 (P)* 15 (P)* kg.cm/cm ASTM D256
Durometer Hardness 65 65 Shore D ASTM D2240
OB

ESCR, F50 (Condition B, 25 % Igepal) 60 400 hrs ASTM D1693


* P = Partial Break
Recommendation :
GL

Extruder temperature : 165 - 190 oC


Die temperature : 180 - 195 oC
FDA Statement :
HDPE under the brand InnoPlus complies with U.S. FDA 21 CFR 177.1520 regulation for polyethylene used in articles that
contact food except for articles used for packaging or holding food during cooking.
Note : Properties reported here are typical values of the product, not to be considered as specifications.
PTT Global Chemical makes no representations as to the accuracy or completeness of the information contained herein.
PTT Polymer Marketing Company Limited
Energy Complex Building A, 9thFloor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 4488 Fax: 66 2140 4333 Revised Date : October, 2011

You might also like