Scribd
Upload
48 views3 pages

Assignmennt

1. This document provides calculations to check the adequacy of the reinforcement in a concrete beam. It calculates the required area of steel, moment capacity, required section modulus, and required flexural reinforcement. 2. It also checks the shear capacity of two sections of the beam. It calculates the shear strength provided by concrete, shear strength reduction factor, and required shear reinforcement. 3. For both sections, it determines that the nominal shear strength is adequate and designs the required stirrup spacing.

Uploaded by

Timothy Charles Yabut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
48 views3 pages

Assignmennt

1. This document provides calculations to check the adequacy of the reinforcement in a concrete beam. It calculates the required area of steel, moment capacity, required section modulus, and required flexural reinforcement. 2. It also checks the shear capacity of two sections of the beam. It calculates the shear strength provided by concrete, shear strength reduction factor, and required shear reinforcement. 3. For both sections, it determines that the nominal shear strength is adequate and designs the required stirrup spacing.

Uploaded by

Timothy Charles Yabut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

1.

INADEQUATE

2.Fc’ = 28Mpa ; fyt = 345Mpa ;   10mm



As’ = 2 
4
16   402.124
2


As = 6 
4
16   1206.372
2

0.85 fc’ ab + As’ Fs’ = As Fs

 600  c  d  
0.85  28 0.85C  275  402.124    1206.372  345
 c 
c = 64.870; a = 55.1395

Fs = 600
 338.333  64.870   2529.333
64.870

Fs’= 600
 64.870  50   137.537
64.870

2529.333
t   0.01265 ;   0.90
200000

Mu = Mu1 + Mu2

 55.1395 
Mu1 = 0.90  0.85  28  55.1395  275   338.333    100.936
 2 

Mu2 = 0.90  402.124137.537 338.333  50  14.352

Mu = 100.936+14.352=115.288

w  L2 
Mu 
24
w  5.52 
115.288 
24
W= 91.468Kn/m

3.𝑊𝐷𝐿 = 20 + (65/10) =𝟐𝟔. 𝟓


𝑊𝐿𝐿 = 15 + (1 + 23/10) = 𝟒𝟗. 𝟓
L=6M
B=900mm

1.Fr
2
0.62 (√28)=3.281mpa
2.Ig
((900 ∗ 100) + (300 ∗ 400))𝑦 = 900(100 ∗ 450) + (300 ∗ 400 ∗ 200)
Y=307.1429
3.Mcr=(3.281(4.889𝑥10^9))/307.1429
Mcr=52.226

4.Ma= (26.5 + 49.5)(6)2/8


Ma= 342
Ma>Mcr

5.Icr=3834.566 (c-60)+(900(c)(c/2)
=11669.132(440-c)
C=88.682 <100 OK!
6. Ie=1.775 x109 mm4
5(26.5𝑥49.5)(6)
7. deflection: 2
384(4700 √28)(1.775 𝑥 109 )

=224.0186 mm
4.

Vu=107.5 Vu=60.25
2 2
Vc= √𝑓𝑐′𝑏𝑑 Vc= √𝑓𝑐′𝑏𝑑
2 2
0.17(1.0)(√21)(250)(320) 0.17(1.0)(√21)(250)(370)

Vc = 62.32 KN Vc = 62.32 KN
𝜃𝑉𝑐 = 0.75(62.32) 𝜃𝑉𝑐 = 0.75(62.32)
=46.74 =46.74
ADEQUACY ADEQUACY
2 2
Vsmax = 0.66√21(250)(320) Vsmax = 0.66√21(250)(320)
Vsmax = 241.96 Vsmax = 241.96
𝑉𝑠 = (𝑉𝑢 − ∅𝑉𝑐)/∅ 𝑉𝑠 = (𝑉𝑢 − ∅𝑉𝑐)/∅
Vs=81.01 Vs=71.35
Vsmax=Vs : ADEQUATE Vsmax=Vs : ADEQUATE
X= 1.00m X= 2.20m
Design of Stirrups @x Design of Stirrups @x
W/seismic W/seismic
S1= d/4 = 320/4 = 80mm S1= d/4 = 320/4 = 80mm

You might also like