0% found this document useful (0 votes)
88 views4 pages

NMMM

This document contains an 11 question quiz about electronics concepts like active filters, power amplifiers, and transformers. The questions refer to 4 circuit diagrams and ask students to calculate values like cutoff frequencies, voltages, currents, and efficiencies based on the given component values and specifications of the circuits like a Butterworth response or voltage/current ratios.

Uploaded by

Nuraddeen Magaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
88 views4 pages

NMMM

This document contains an 11 question quiz about electronics concepts like active filters, power amplifiers, and transformers. The questions refer to 4 circuit diagrams and ask students to calculate values like cutoff frequencies, voltages, currents, and efficiencies based on the given component values and specifications of the circuits like a Butterworth response or voltage/current ratios.

Uploaded by

Nuraddeen Magaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Week 13: EE3110 Quiz 3 Paper: 1

Student Name : _______________________________

Student ID : _______________________________

Please answer question 1 and 2 by referring to Fig. 1, which shows a low-pass Sallen-Key active filter. It is
given that C3 = 1nF. A second order Butterworth response is designed with cut off frequency fp = 2 kHz.
C3 = 1nF

10k 10k
vi 
R1 R2
vo
C4  RB

RA

Figure 1
Question 1 (2 Marks)

Find the value of C4.


A. 1281.6629 nF
B. 63.3257 nF
C. 2.0000 nF
D. 1.3695 nF
E. 2500.0000 nF

Question 2 (3 Marks)

Find the ratio of RB to RA.


A. 0.5860
B. 116.3992
C. 785.5225
D. 115.3992
E. 784.5225

1
Question 3 (3 Marks)

Fig. 2 shows a unit-gain low-pass Sallen-Key active filter. It is given that C3  nC 4 . A second order
Butterworth response is designed with cut off frequency fp = 4 kHz. Find the value of C4.
A. 2.8980 nF C3 = nC4
B. 1.4140 nF
C. 0.5860 nF
61k 61k
D. 0.4612 nF vi 
E. Cannot be determined R1 R2
vo

C4

Figure 2
Please answer question 4 to question 7 by referring to Fig 3, which shows a Class-A power amplifier.
Assume Ic ~ IE.

VCC = 12V

R1 RC = 150 
3k
RL
Vi =200
100
R2
RE
1k 
50

Figure 3
Question 4 (2 Marks)

Determine the current ICQ.


A. 33.2000 A
B. 0.1110 A
C. 0.0460 A
D. 9.2000 A
E. 0.1660 A

Question 5 (2 Marks)

Determine the voltage VCEQ.


A. 3.2200 V
B. 2.2790 V
C. 2.9230 V
D. 5.6520 V
E. 2.8000 V
2
Question 6 (5 Marks)

Determine the maximum efficiency.


A. 25.0000 %
B. 7.4867 %
C. 6.6667 %
D. 2.4167 %
E. 21.7718 %

Question 7 (3 Marks)

If an ac output voltage with a peak value of 1V, determine its efficiency.


A. 3.5034 %
B. 25.0000 %
C. 6.6667 %
D. 0.8503 %
E. 18.6919 %

Please answer question 8 to 11 by referring to Fig. 4, which shows a transformer-coupled Class-A power
amplifier. The ratio of turns in primary winding to secondary winding is 4:1. The dc and ac resistance from the
primary winding of the transformer are 5  and Z1, respectively. A resistance RE = 5  is connected to the
E-terminal of the BJT transistor. Assume Ic ~ IE.

VCC = 12V

R1 Z1 RL = 20
12 k

Vi =25

RE
=5

Figure 4
Question 8 (5 Marks)

Determine the voltage VCEQ.


A. 10.0020 V
B. 11.7670 V
C. 10.1545 V
D. 11.4140 V
E. 12.0000 V

3
Question 9 (3 Marks)

Determine the current ICQ.


A. 0.02081 A
B. 0.02251 A
C. 0.02213 A
D. 0.02330 A
E. 0.04660 A

Question 10 (3 Marks)

Determine the a.c. cut-off voltage Vce.


A. 24.0000 V
B. 17.4168 V
C. 23.5223 V
D. 16.9993 V
E. 19.2227 V

Question 11 (3 Marks)

Determine the output compliance from the load resistor.


A. 14.9113 V
B. 3.7278 V
C. 21.3779 V
D. 23.5340 V
E. 4.1864 V

--- End of Paper ---

You might also like