Scribd
Upload
51 views2 pages

ES302 Watershed Delineation and Drainage Area Measurement

Watersheds are defined by topography, with drainage divides along ridges and stream channels along V-shaped contour lines. To delineate watershed boundaries and streams, examine contour patterns for V-shapes indicating streams. Starting at the watershed outlet, draw the highest elevation ridgelines separating drainage to define the boundary. Then draw lines within V-patterns to indicate the drainage network flowing from high to low elevation within the watershed boundary. An example map shows contour lines, topography, streams and the drainage divide delineated using these steps.

Uploaded by

Mark Angelo Tabije
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views2 pages

ES302 Watershed Delineation and Drainage Area Measurement

Watersheds are defined by topography, with drainage divides along ridges and stream channels along V-shaped contour lines. To delineate watershed boundaries and streams, examine contour patterns for V-shapes indicating streams. Starting at the watershed outlet, draw the highest elevation ridgelines separating drainage to define the boundary. Then draw lines within V-patterns to indicate the drainage network flowing from high to low elevation within the watershed boundary. An example map shows contour lines, topography, streams and the drainage divide delineated using these steps.

Uploaded by

Mark Angelo Tabije
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ES302 Watershed Delineation and Drainage Area Measurement

Watersheds or drainage basins are comprised of a network of stream channels that link from
smaller to larger, providing a conduits for surface water runoff and sediment transport on the
Earth’s surface. Drainage basins are defined by topographic contour patterns with drainage
divides (bounding ridges) and stream channels (defined by “V-shaped contour lines”). When
defining watershed boundaries and stream channels it is important to remember that water
flows from high elevation to low elevation, and in a simple sense, perpendicular to contour
line.

The example map below shows an illustration of contour lines, topography, stream channel
network, and drainage divide. The following are the steps used to delineate watershed
boundaries and stream networks:
Draw the watershed divide or boundary:

(1) First examine the contour pattern, look for “contour crenulations”, ie. V-shape contour
lines that indicate the location of a stream valley.

(2) Using a pencil, start at the “mouth” or the outlet of the watershed and draw a line that
follows the highest elevation hill or ridgelines that separate drainage

(3) Draw lines in the center of the v-patterns that show the drainage network.

Example Watershed Network

Exercise: Refer to the Renovo West map on the next page. A. Determine the contour interval for
the map. B. Your job is to draw the drainage divide for the Summerson Run watershed outlined
within the box. The main stream is show in the Heavy dark line. Draw in the smaller streams by
identifying V-shape crenulations. Once you have the stream network, draw the drainage divide
according to the procedures outlined above. C. Using a ruler and the graphical scale, determine the
fractional scale for the map. D. Using the Planix 7 planimeter and instructions, determine the
drainage area of Summerson Run in sq. km and sq. mi.

You might also like