Scribd Logo
Upload

Welcome to Scribd!

  • 336 views

    9852 2399 01 Settings COP 1840,1840EX

    Uploaded by

    Ricky Vil
    This document contains base setting recommendations and specifications for an Atlas Copco COP 1840/1840EX drill rig. It lists recommended maximum, base, and actual setting values for various drill rig pressures and speeds, including percussion pressure, feed pressure, dampening pressure, theoretical rotation speed, air flushing pressure, and other settings. The document is to be filled out by a responsible service technician when performing base settings on the drill rig.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    9852 2399 01 Settings COP 1840,1840EX

    Uploaded by

    Ricky Vil
    336 views1 page
    This document contains base setting recommendations and specifications for an Atlas Copco COP 1840/1840EX drill rig. It lists recommended maximum, base, and actual setting values for various drill rig pressures and speeds, including percussion pressure, feed pressure, dampening pressure, theoretical rotation speed, air flushing pressure, and other settings. The document is to be filled out by a responsible service technician when performing base settings on the drill rig.

    Original Description:

    PERFORADORA ATLAS COPCO FLECI ROCK T35

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains base setting recommendations and specifications for an Atlas Copco COP 1840/1840EX drill rig. It lists recommended maximum, base, and actual setting values for various drill rig pressures and speeds, including percussion pressure, feed pressure, dampening pressure, theoretical rotation speed, air flushing pressure, and other settings. The document is to be filled out by a responsible service technician when performing base settings on the drill rig.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    336 views1 page

    9852 2399 01 Settings COP 1840,1840EX

    Uploaded by

    Ricky Vil
    This document contains base setting recommendations and specifications for an Atlas Copco COP 1840/1840EX drill rig. It lists recommended maximum, base, and actual setting values for various drill rig pressures and speeds, including percussion pressure, feed pressure, dampening pressure, theoretical rotation speed, air flushing pressure, and other settings. The document is to be filled out by a responsible service technician when performing base settings on the drill rig.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Atlas Copco

    Settings
    COP 1840 / 1840EX
    Site: __________________________________________________________________

    Drill Rig type: __________ Serial no: AVO ____________Manufacturing number:_____________

    COP: ___________Serial no: AVO _____________

    Caution! Base setting should be done when the hydraulic oil temperature is at normal working
    temperature.

    Max Base settings Actual settings

    Intake accumulator (Percussion) charge to


    Collaring pressure minus 30-40 bar 100 bar 90 bar . . . . . . . . . . bar

    Dampening accumulator charge pressure 25 bar . . . . . . . . . . bar

    Dampening pressure idling (Measured at rock drill) 30-35 bar . . . . . . . . . . bar


    According pressure at operator’s panel. 40 bar . . . . . . . . . . bar

    Percussion pressure at operators panel:


    Collaring 120-130 bar . . . . . . . . . . bar
    Drilling Stroke setting 2 230 bar 200 bar . . . . . . . . . . bar
    Drilling Stroke setting 3 190 bar 190 bar . . . . . . . . . . bar

    Feed pressure Bench drilling(pf):


    Collaring 40 bar . . . . . . . . . . bar
    Drilling 80 bar . . . . . . . . . . bar
    Correspondening – Dampning pressure 70+-10 bar . . . . . . . . . . bar

    Feed pressure production drilling(pf):


    Collaring 40 bar . . . . . . . . . . bar
    Drilling 70 bar . . . . . . . . . . bar
    Corresponding – Dampening pressure 70+-10 bar . . . . . . . . . . bar

    Theoretical rotation speed Bench drilling:


    Button bit D = 76 mm Ca: 80 rpm . . . . . . . rpm/min
    Button bit D = 89 mm Ca: 70 rpm . . . . . . .rpm/min
    Button bit D = 102-127 mm Ca: 60 rpm . . . . . . . rpm/min

    Other settings on the drill rig:


    - Air flushing pressure Max 12 bar . . . . . . . . . . bar
    - Pos pressure 220 bar . . . . . . . . . . bar
    - RPCF-pressure 65 bar . . . . . . . . . .bar
    - Anti jamming pressure (15 bar above RPCF-pressure) 80 bar . . . . . . . . . . bar
    - Air pressure at rock drill 2-3 bar * . . . . . . . . . . bar
    - Air pressure at operator’s panel 5 bar . . . . . . . . . . bar
    - ECL-lubricant pulses/minute* · 20-25 pulses/min . . . . . . .Pulses/min

    *see Drill rigg manual

    Settings done by:

    …………………………………… …………………..
    Responsible Service Technician Date

    No. 9852 2399 10

    You might also like