250

x
A
2438 10Ø @ 150mm c/c along
4-16Ø 4-16Ø TRIBHUVAN UNIVERSITY
vertical direction both side
INSTITUTE OF ENGINEERING
10@ 150mm c/c along SAGARMATHA ENGINEERING COLLEGE
4-16Ø Horizontal direction both side

653
column SANEPA, LALITPUR
A
20Ø @ 150mm c/c
10Ø horizontal rebar@150 mm c/c Ld
both faces 20Ø @ 150mm c/c

NOTES:
2438

650mmTHICK RCC RAFT

100mm THICK PCC (1:3:6) 1. All measurements are in mm unless otherwise noted.
100 THICK STONE BOULDER SOLING 2. Architectural drawing should be read in conjunction with
4-16Ø
Typical shear wall section COMPACTED EARTH Structural, Sanitary and Electrical drawings.
10Ø Vertical rebar@150 mm c/c at Mat 3. Minimum Grade of Concrete To be M25 for column and M20
Scale:1:50 for Beam,Slab,Staircase and Mat.
both faces
4. Clear Cover to main reinforcement shall be as:
i. foundation =50mm
ii. Column =40mm

785
4-16Ø 4-16Ø iii. Beam & Ribs =25mm
iv. Stair&Slab=20mm
5. Only written dimension to be followed ,drawings not to be
measured as per given scale.
THIRD FLOOR

shear wall plan

thickness:250mm
x

SECOND FLOOR
( EL 6098mm)
10Ø@150mm spacing
vertical bar

300

300
10Ø@150mm spacing
30

0
30
0

S1
horizontal bar

S1
4#16 mm dia bars
FIRST FLOOR
( EL 3048mm) 10@150mm spacing
all horizontal bar

30
0
30

0
300

300
10Ø@150mm spacing 10Ø@150mm spacing
vertical bar vertical bar
Section A-A Project Title :
S1=8@100MM
Section x-x SEISMIC ANALYSIS AND STRUCTURAL
DESIGN OF MULTISTORIED RCC BUILDING
DETAIL AT-B
Scale:1:20 Sheet Title :
SHEAR WALL DETAILS

DRAWN BY:GROUP 5
1. AMIT RASTOGI(072/BCE/07)
2. ANISH PANDIT (072/BCE/08)
3. SAMIKSHA THAPA(072/BCE/38
4. SAMIR SHRESTHA(072/BCE/39)
5. SAROJ GYAWALI (072/BCE/40)
Scale -
AS MENTIONED @ A3 S_12
DATE:
GROUP 5 Shrawan
2076