Scribd
Upload
277 views1 page

Readme

1. Install Autodesk Inventor Professional 2019 and the Network License Manager. Configure the license server to point to the license file and start the server. 2. Start Autodesk Inventor Professional 2019 in multi-user mode and select the local license server. This will generate license folders that need to be modified. 3. Copy the license path file to all the license folders. Then run the crack executable and start Autodesk Inventor Professional 2019 again in multi-user mode selecting the local license server to activate the cracked version.

Uploaded by

Orlando
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
277 views1 page

Readme

1. Install Autodesk Inventor Professional 2019 and the Network License Manager. Configure the license server to point to the license file and start the server. 2. Start Autodesk Inventor Professional 2019 in multi-user mode and select the local license server. This will generate license folders that need to be modified. 3. Copy the license path file to all the license folders. Then run the crack executable and start Autodesk Inventor Professional 2019 again in multi-user mode selecting the local license server to activate the cracked version.

Uploaded by

Orlando
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

Install the Autodesk Inventor Professional 2019

2. Go to folder named "CRACK". Install Network License Manager


("nlm11.14.1.3_ipv4_ipv6_win64.msi") and change "this_host" in ADESK.DAT
to your host name. Setup & start license server (LMTOOLS Utility) and Select
"Configuration using Services"
Go to "Config Services" tab and Select "path to the lmgrd.exe file" to your
lmgdr.exe (typically C:\Autodesk\Network License Manager\lmgdr.exe) , Path to
License file (Choose to show *.dat files) and select "ADESK.DAT)
Go to "Start/Stop/Reload" TAB and click "Start Server"
(see
https://knowledge.autodesk.com/sites/default/files/file_downloads/nlm11.14.1.3_ipv4
_ipv6_win64_readme.htm if you have problems)

3. Disconnect the Internet (if it is possible) and start Autodesk Inventor


Professional 2019 and Choose Multi User
Select License server model: Single License Server
type "locahost" in Server name
Inventor Professional 2019 will generate folder that ends with _2019.0.0.F
located in \ProgramData\Autodesk\CLM\LGS\
Exit Autodesk Inventor Professional 2019

3. Copy/overwrite LICPATH.LIC to all subfolders by path


\ProgramData\Autodesk\CLM\LGS\
Like - \ProgramData\Autodesk\CLM\LGS\128K1_2019.0.0.F\licpath.lic
- \ProgramData\Autodesk\CLM\LGS\919K1_2019.0.0.F\licpath.lic

4. Run inventor2019crk.exe

5. Start Autodesk Inventor Professional 2019 and Choose Multi User


Select License server model: Single License Server
type "locahost" in Server name

6. Enjoy!

You might also like