Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Tromp Curve Calculation

    Uploaded by

    nima mazaheri
    The document contains data from a particle size separation test using sieves of various sizes ranging from 1 to 200 microns. It shows the percentage of feed, fines, and rejects that passed through each sieve size. It also contains graphs showing the cumulative percentage residue for feed, fines, and rejects against sieve size on logarithmic scales. Several key parameters are listed and evaluated against typical ranges including a circulation factor of 1.81, cut size (d50) of 60 microns, sharpness (d25/d75) of 0.38, bypass of 8.9%, separator load of 1.7 kg/m3, and product load of 0.6 kg/m3. A checklist of typical ranges for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tromp Curve Calculation

    Uploaded by

    nima mazaheri
    38 views6 pages
    The document contains data from a particle size separation test using sieves of various sizes ranging from 1 to 200 microns. It shows the percentage of feed, fines, and rejects that passed through each sieve size. It also contains graphs showing the cumulative percentage residue for feed, fines, and rejects against sieve size on logarithmic scales. Several key parameters are listed and evaluated against typical ranges including a circulation factor of 1.81, cut size (d50) of 60 microns, sharpness (d25/d75) of 0.38, bypass of 8.9%, separator load of 1.7 kg/m3, and product load of 0.6 kg/m3. A checklist of typical ranges for

    Original Description:

    Good

    Original Title

    261698712 Tromp Curve Calculation

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains data from a particle size separation test using sieves of various sizes ranging from 1 to 200 microns. It shows the percentage of feed, fines, and rejects that passed through each sieve size. It also contains graphs showing the cumulative percentage residue for feed, fines, and rejects against sieve size on logarithmic scales. Several key parameters are listed and evaluated against typical ranges including a circulation factor of 1.81, cut size (d50) of 60 microns, sharpness (d25/d75) of 0.38, bypass of 8.9%, separator load of 1.7 kg/m3, and product load of 0.6 kg/m3. A checklist of typical ranges for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views6 pages

    Tromp Curve Calculation

    Uploaded by

    nima mazaheri
    The document contains data from a particle size separation test using sieves of various sizes ranging from 1 to 200 microns. It shows the percentage of feed, fines, and rejects that passed through each sieve size. It also contains graphs showing the cumulative percentage residue for feed, fines, and rejects against sieve size on logarithmic scales. Several key parameters are listed and evaluated against typical ranges including a circulation factor of 1.81, cut size (d50) of 60 microns, sharpness (d25/d75) of 0.38, bypass of 8.9%, separator load of 1.7 kg/m3, and product load of 0.6 kg/m3. A checklist of typical ranges for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 6

    Rm

    Feed
    dim. feed % Pass fines % Pass rejects % Pass Size (um)
    %residue
    1 3.6 4.9 1.9 1 96.4
    2 6.1 8.3 3.5 2 93.9
    4 11.0 14.7 6.3 4 89.0
    8 18.5 25.4 10.1 8 81.5
    16 31.2 44.9 14.4 16 68.8

    24 39.7 58.8 16.1 24 60.3


    32 47.8 71.1 19.1 32 52.2
    48 60.6 87.0 28.1 48 39.4
    64 67.7 92.6 37.1 64 32.3
    96 81.8 100.0 59.5 96 18.2

    % r e c o v e r y t o r e t u r n ( r e je c t )
    200 95.1 100.0 89.0 200 4.9
    TOTAL: 463.1 607.7 285.1 TOTAL: 636.9
    % Residue

    100.0
    90.0
    80.0
    70.0
    60.0
    50.0 100.0
    Tromp value
    40.0 90.0
    80.0
    30.0 70.0
    20.0 60.0
    50.0
    10.0 40.0

    0.0 30.0
    20.0
    1 10Sieve size (um)
    100 1000 10.0
    Feed %residue Fines %residue 0.0
    1 10Sieve size (um)
    10
    Rf Rg
    Fines Rejects Size avg
    CF Tromp value
    %residue %residue (um)
    95.1 98.1 1.76 0.5 22.9
    91.7 96.5 1.85 1.5 29.3
    85.3 93.7 1.79 3 25.2
    74.6 89.9 1.82 6 22.8
    55.1 85.6 1.82 12 15.2
    41.2 83.9 1.81 20 8.9
    28.9 80.9 1.81 28 16.6
    13.0 71.9 1.81 40 31.5
    7.4 62.9 1.81 56 56.9
    0.0 40.5 1.82 80 71.4
    0.0 11.0 1.80 148 98.8
    492.3 814.9 1.81 TOTAL:

    Tromp value

    10 Sieve size (um)


    100 1000
    Item Units
    Circulation factor -
    Cut size(d50) micron
    Sharpness (d25/d75) -
    Bypass %
    Sep.load kg/m3
    Product load kg/m3
    Typical range Result Evaluate
    2-3 1.81
    depend on rotor speed and fineness level 60 micron
    0.5-0.6 0.38
    5-15% 8.90%
    1.8-2.5 1.7
    0.75 0.6
    Check point for separator test
    Item Units Typical range
    Circulation factor - 2-3
    depend on rotor speed
    Cut size(d50) micron
    and fineness level
    Sharpness (d25/d75) - 0.5-0.6
    Bypass % 5-15%
    Separator load kg/m3 1.8-2.5
    Product load kg/m3 0.75-0.8

    You might also like