Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Electrode Booklet F Web 22

    Uploaded by

    satnam
    This document provides information on TENALLOY HH SPL, a low hydrogen welding electrode for joining high tensile steels. It has extra low hydrogen content, medium penetration, and excellent toughness down to -46°C. It is suitable for welding carbon and low alloy steels where severe service conditions exist, including various grades of steel. The electrode has as-welded mechanical properties of 550 MPa UTS and 465 MPa yield strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Electrode Booklet F Web 22

    Uploaded by

    satnam
    21 views1 page
    This document provides information on TENALLOY HH SPL, a low hydrogen welding electrode for joining high tensile steels. It has extra low hydrogen content, medium penetration, and excellent toughness down to -46°C. It is suitable for welding carbon and low alloy steels where severe service conditions exist, including various grades of steel. The electrode has as-welded mechanical properties of 550 MPa UTS and 465 MPa yield strength.

    Original Description:

    Electrode Booklet F Web 22

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on TENALLOY HH SPL, a low hydrogen welding electrode for joining high tensile steels. It has extra low hydrogen content, medium penetration, and excellent toughness down to -46°C. It is suitable for welding carbon and low alloy steels where severe service conditions exist, including various grades of steel. The electrode has as-welded mechanical properties of 550 MPa UTS and 465 MPa yield strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views1 page

    Electrode Booklet F Web 22

    Uploaded by

    satnam
    This document provides information on TENALLOY HH SPL, a low hydrogen welding electrode for joining high tensile steels. It has extra low hydrogen content, medium penetration, and excellent toughness down to -46°C. It is suitable for welding carbon and low alloy steels where severe service conditions exist, including various grades of steel. The electrode has as-welded mechanical properties of 550 MPa UTS and 465 MPa yield strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TENALLOY HH SPL

    C-Mn STEEL (Low Hydrogen)

    Welding Electrode for joining High Tensile Steels


    CLASSIFICATION : EN ISO 2560-A AWS A/SFA 5.1 IS 814 APPROVALS :

    E 42 3 B 32 H5 E 7018-1 E B5629H3JX MEETS NACE Requirements,


    ONGC/EIL, Spec GS8
    Annexure 1A

    KEY FEATURES :

    • Extra low hydrogen iron powder type • Medium Penetration


    • Weld metal resistant to cold and hot • Excellent toughness down to -46˚C
    cracking and tri-axial stressing • All position capability

    WELDING POSITION : AC (90 OCV)/ DCEP

    TYPICAL APPLICATIONS :

    • Carbon and low alloy steel fabrication where severe • Joining steels of ASTM 106 Gr.B
    service condition exist (NACE quality), SA 414/414M Gr.D/E/F/G,
    • Suitable for medium high tensile steels, heavy SA 515/515M Gr.60/65, SA 516/516M
    sections and restrained joints in high tensile steel Gr.60/65

    REDRYING CONDITION : 250-300OC for minimum 1 hr. (Also available in vacuum packed condition)

    CHEMICAL COMPOSITION OF UNDILUTED WELD METAL, Wt % :


    C Mn Si S P
    Typical 0.06 1.1 0.3 0.01 0.01
    Specification 0.04-0.09 0.90-1.40 0.15-0.50 0.012 max 0.015 max

    MECHANICAL PROPERTIES OF ALL WELD METAL :


    YS at 0.2% CVN Impact , J
    Condition UTS, MPa EL%
    offset, MPa -30°C -46°C
    Typical 550 465 26 70 52
    As Welded
    Specification 510-580 420-520 24-30 50-100 30-60

    Hardness, 3 Layer: 200 BHN max Diffusible H2 Content: <3 ml/100 gm

    SPECIAL TESTS : HIC, SSCC, Hot Tensile Test at 200ºC

    PARAMETERS - PACKING DATA :


    Approx. Approx. wt. of
    Ø x L, mm Amperage, A Carton/Box
    Pcs/Carton 1000 pcs, Kg.
    2.5 x 350 60-90 281 4 18
    3.15 x 450 90-140 132 4 38
    4.0 x 450 140-180 85 4 58
    5.0 x 450 180-240 55 4 89

    PASSION FOR WELDING SINCE 1951 www.adorwelding.com

    22

    You might also like