SGM803/SGM809/SGM810

Microprocessor Supervisory
Circuit in 3-Pin SOT-23
GENERAL DESCRIPTION FEATURES
The SGM803/SGM809/SGM810 supervisory circuits ● Precision Voltage Monitor: 1.8V, 2.5V, 3V, 3.3V,
monitor the power supply voltage in microprocessor 5V Options
and digital systems. They provide a reset output during ● Superior Upgrade for MAX803/MAX809/MAX810
power-up, power-down and brownout conditions. On and ADM803/ADM809/ADM810
power-up, an internal timer holds reset asserted for ● Fully Specified over Temperature
240ms. This holds the microprocessor in a reset state ● Low Power Consumption: 13μA (TYP)
until conditions have stabilized. The RESET output ● Reset Assertion Down to 1V VCC
remains operational with VCC as low as 1V. The ● 150ms Power-On Reset (MIN)
SGM803 and SGM809 provide an active low reset Open-Drain RESET Output (SGM803)
signal ( RESET ) while the SGM810 provides an active Push-Pull RESET Output (SGM809)
high signal (RESET) output. The SGM809/SGM810 Push-Pull RESET Output (SGM810)
have push-pull outputs, whereas the SGM803 has an ● -40℃ to +125℃ Operating Temperature Range
open-drain output, which requires an external pull-up ● Small Packaging
resistor. SGM803 Available in SOT-23-3 and SOT-23
SGM809 Available in SOT-23-3 and SOT-23
Eight reset threshold voltage options are available,
SGM810 Available in SOT-23-3 and SOT-23
suitable for monitoring 1.8V, 2.5V, 3V, 3.3V and 5V
supply voltages.
APPLICATIONS
The reset comparator features built-in glitch immunity,
Microprocessor Systems
making it immune to fast transients on VCC.
Controllers
The low supply current of typically 13μA makes the Intelligent Instruments
SGM803/SGM809/SGM810 ideal for use in portable, Automotive Systems
battery operated equipment. All are specified over the Safety Systems
extended -40℃ to +125℃ temperature range. Portable Instruments

TYPICAL APPLICATION

VCC VCC
RPULL-UP
SGM803 MICROPROCESSOR
SGM803/SGM809 only
SYSTEM

RESET RESET
GND GND

SG Micro Corp JANUARY 2018 – REV. E. 3

www.sg-micro.com
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

PACKAGE/ORDERING INFORMATION
RESET PACKAGE ORDERING PACKAGE PACKING
MODEL
THRESHOLD (V) DESCRIPTION NUMBER MARKING OPTION
4.63 SOT-23-3 SGM803-LXN3/TR 803L Tape and Reel, 3000
4.63 SOT-23 SGM803-LXN3L/TR 803LL Tape and Reel, 3000
4.38 SOT-23-3 SGM803-MXN3/TR 803M Tape and Reel, 3000
4.38 SOT-23 SGM803-MXN3L/TR 803ML Tape and Reel, 3000
4.00 SOT-23-3 SGM803-JXN3/TR 803J Tape and Reel, 3000
4.00 SOT-23 SGM803-JXN3L/TR 803JL Tape and Reel, 3000
3.08 SOT-23-3 SGM803-TXN3/TR 803T Tape and Reel, 3000
3.08 SOT-23 SGM803-TXN3L/TR 803TL Tape and Reel, 3000
SGM803
2.93 SOT-23-3 SGM803-SXN3/TR 803S Tape and Reel, 3000
2.93 SOT-23 SGM803-SXN3L/TR 803SL Tape and Reel, 3000
2.63 SOT-23-3 SGM803-RXN3/TR 803R Tape and Reel, 3000
2.63 SOT-23 SGM803-RXN3L/TR 803RL Tape and Reel, 3000
2.32 SOT-23-3 SGM803-ZXN3/TR 803Z Tape and Reel, 3000
2.32 SOT-23 SGM803-ZXN3L/TR 803ZL Tape and Reel, 3000
1.63 SOT-23-3 SGM803-XXN3/TR 803X Tape and Reel, 3000
1.63 SOT-23 SGM803-XXN3L/TR 803XL Tape and Reel, 3000
4.63 SOT-23-3 SGM809-LXN3/TR 809L Tape and Reel, 3000
4.63 SOT-23 SGM809-LXN3L/TR 809LL Tape and Reel, 3000
4.38 SOT-23-3 SGM809-MXN3/TR 809M Tape and Reel, 3000
4.38 SOT-23 SGM809-MXN3L/TR 809ML Tape and Reel, 3000
4.00 SOT-23-3 SGM809-JXN3/TR 809J Tape and Reel, 3000
4.00 SOT-23 SGM809-JXN3L/TR 809JL Tape and Reel, 3000
3.08 SOT-23-3 SGM809-TXN3/TR 809T Tape and Reel, 3000
3.08 SOT-23 SGM809-TXN3L/TR 809TL Tape and Reel, 3000
SGM809
2.93 SOT-23-3 SGM809-SXN3/TR 809S Tape and Reel, 3000
2.93 SOT-23 SGM809-SXN3L/TR 809SL Tape and Reel, 3000
2.63 SOT-23-3 SGM809-RXN3/TR 809R Tape and Reel, 3000
2.63 SOT-23 SGM809-RXN3L/TR 809RL Tape and Reel, 3000
2.32 SOT-23-3 SGM809-ZXN3/TR 809Z Tape and Reel, 3000
2.32 SOT-23 SGM809-ZXN3L/TR 809ZL Tape and Reel, 3000
1.63 SOT-23-3 SGM809-XXN3/TR 809X Tape and Reel, 3000
1.63 SOT-23 SGM809-XXN3L/TR 809XL Tape and Reel, 3000

SG Micro Corp JANUARY 2018

www.sg-micro.com
2
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

PACKAGE/ORDERING INFORMATION (continued)

RESET PACKAGE ORDERING PACKAGE PACKING
MODEL
THRESHOLD (V) DESCRIPTION NUMBER MARKING OPTION
4.63 SOT-23-3 SGM810-LXN3/TR 810L Tape and Reel, 3000
4.63 SOT-23 SGM810-LXN3L/TR 810LL Tape and Reel, 3000
4.38 SOT-23-3 SGM810-MXN3/TR 810M Tape and Reel, 3000
4.38 SOT-23 SGM810-MXN3L/TR 810ML Tape and Reel, 3000
4.00 SOT-23-3 SGM810-JXN3/TR 810J Tape and Reel, 3000
4.00 SOT-23 SGM810-JXN3L/TR 810JL Tape and Reel, 3000
3.08 SOT-23-3 SGM810-TXN3/TR 810T Tape and Reel, 3000
3.08 SOT-23 SGM810-TXN3L/TR 810TL Tape and Reel, 3000
SGM810
2.93 SOT-23-3 SGM810-SXN3/TR 810S Tape and Reel, 3000
2.93 SOT-23 SGM810-SXN3L/TR 810SL Tape and Reel, 3000
2.63 SOT-23-3 SGM810-RXN3/TR 810R Tape and Reel, 3000
2.63 SOT-23 SGM810-RXN3L/TR 810RL Tape and Reel, 3000
2.32 SOT-23-3 SGM810-ZXN3/TR 810Z Tape and Reel, 3000
2.32 SOT-23 SGM810-ZXN3L/TR 810ZL Tape and Reel, 3000
1.63 SOT-23-3 SGM810-XXN3/TR 810X Tape and Reel, 3000
1.63 SOT-23 SGM810-XXN3L/TR 810XL Tape and Reel, 3000

Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.

ABSOLUTE MAXIMUM RATINGS OVERSTRESS CAUTION

(Typical values are at TA = +25℃, unless otherwise noted.) Stresses beyond those listed in Absolute Maximum Ratings
VCC ....................................................................... -0.3V to 6V may cause permanent damage to the device. Exposure to
RESET, RESET .......................................-0.3V to VCC + 0.3V absolute maximum rating conditions for extended periods
Input Current, VCC ......................................................... 20mA may affect reliability. Functional operation of the device at any
Output Current, RESET, RESET ................................... 20mA conditions beyond those indicated in the Recommended
Rate of Rise, VCC ...................................................... 100V/μs Operating Conditions section is not implied.
Power Dissipation, PD @ TA = +25℃
SOT-23-3 ....................................................................... 0.4W ESD SENSITIVITY CAUTION
Package Thermal Resistance This integrated circuit can be damaged by ESD if you don’t
SOT-23-3, θJA .......................................................... 250℃/W pay attention to ESD protection. SGMICRO recommends that
Junction Temperature .................................................+150℃ all integrated circuits be handled with appropriate precautions.
Storage Temperature Range ........................ -65℃ to +150℃ Failure to observe proper handling and installation procedures
Lead Temperature (Soldering, 10s) ............................+260℃ can cause damage. ESD damage can range from subtle
ESD Susceptibility performance degradation to complete device failure. Precision
HBM ............................................................................. 4000V integrated circuits may be more susceptible to damage
MM ................................................................................. 400V because very small parametric changes could cause the
device not to meet its published specifications.
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range ..................... -40℃ to +125℃ DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.

SG Micro Corp JANUARY 2018

www.sg-micro.com
3
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

PIN CONFIGURATIONS
(TOP VIEW)

GND 1
SGM803
SGM809 3 VCC
SGM810
RESET/RESET 2

SOT-23-3/SOT-23

PIN DESCRIPTION
PIN NUMBER
NAME FUNCTION
SGM803 SGM809 SGM810

GND 1 1 1 Ground

Active Low Reset (SGM803/SGM809). RESET remains low while VCC is below
RESET 2 2 — the reset threshold, and remains low for 240ms (TYP) after VCC rises above the
reset threshold.
Active High Reset (SGM810). RESET remains high while VCC is below the reset
RESET — — 2 threshold, and remains high for 240ms (TYP) after VCC rises above the reset
threshold.
VCC 3 3 3 Power Supply. Power supply voltage that is monitored.

SG Micro Corp JANUARY 2018

www.sg-micro.com
4
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

ELECTRICAL CHARACTERISTICS
(VCC = 5V for L/M/J Models, 3.3V for T/S Models, 3V for R Models, 2.5V for Z Model, 1.8V for X Model, unless otherwise noted.)
PARAMETER CONDITIONS MIN TYP MAX UNITS
SUPPLY
TA = 0℃ to +70℃ 1.0 5.5 V
Voltage
TA = -40℃ to +125℃ 1.2 5.5 V
VCC < 5.5V, SGM8_L/M/J, TA = +25℃ 17 30 μA
VCC < 5.5V, SGM8_L/M/J, TA = -40℃ to +125℃ 50 μA
Current
VCC < 3.6V, SGM8_R/S/T/Z/X, TA = +25℃ 13 25 μA
VCC < 3.6V, SGM8_R/S/T/Z/X, TA = -40℃ to +125℃ 45 μA
RESET VOLTAGE THRESHOLD
TA = +25℃ 4.537 4.63 4.723 V
SGM8_L
TA = -40℃ to +125℃ 4.40 4.86 V
TA = +25℃ 4.292 4.38 4.468 V
SGM8_M
TA = -40℃ to +125℃ 4.16 4.56 V
TA = +25℃ 3.92 4.00 4.08 V
SGM8_J
TA = -40℃ to +125℃ 3.8 4.2 V
TA = +25℃ 3.003 3.08 3.157 V
SGM8_T
TA = -40℃ to +125℃ 2.92 3.23 V
TA = +25℃ 2.857 2.93 3.003 V
SGM8_S
TA = -40℃ to +125℃ 2.78 3.08 V
TA = +25℃ 2.564 2.63 2.696 V
SGM8_R
TA = -40℃ to +125℃ 2.50 2.76 V
TA = +25℃ 2.262 2.32 2.378 V
SGM8_Z
TA = -40℃ to +125℃ 2.22 2.42 V
TA = +25℃ 1.589 1.63 1.671 V
SGM8_X
TA = -40℃ to +125℃ 1.55 1.71 V
Reset Threshold Temperature
30 ppm/℃
Coefficient
VCC to RESET/ RESET Delay VCC = VTH to (VTH - 100mV) 20 μs
TA = -40℃ to +85℃ 150 240 560 ms
Reset Active Timeout Period
TA = -40℃ to +125℃ 100 840 ms

RESET/ RESET OUTPUT VOLTAGE

Low (SGM803R/S/T/Z/X)
VCC = VTH(MIN), ISINK = 1.2mA 0.3 V
Low (SGM809R/S/T/Z/X)
Low (SGM803L/M/J)
VCC = VTH(MIN), ISINK = 3.2mA 0.4 V
Low (SGM809L/M/J)
Low (SGM803R/S/T/L/M/J/Z/X)
VCC > 1.0V, ISINK = 50μA 0.3 V
Low (SGM809R/S/T/L/M/J/Z/X)
High (SGM809R/S/T/Z/X) VCC > VTH(MAX), ISOURCE = 500μA 0.8 × VCC V
High (SGM809L/M/J) VCC > VTH(MAX), ISOURCE = 800μA VCC - 1.5 V
Low (SGM810R/S/T/Z/X) VCC = VTH(MAX), ISINK = 1.2mA 0.3 V
Low (SGM810L/M/J) VCC = VTH(MAX), ISINK = 3.2mA 0.4 V
High (SGM810R/S/T/L/M/J/Z) 1.8V < VCC < VTH(MIN), ISOURCE = 150μA 0.8 × VCC V
High (SGM810X) 1.2V < VCC < VTH(MIN), ISOURCE = 150μA 0.8 × VCC V
RESET Open-Drain Output VCC > VTH, reset de-asserted 1 μA
Leakage Current (SGM803)

SG Micro Corp JANUARY 2018

www.sg-micro.com
5
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

TYPICAL PERFORMANCE CHARACTERISTICS

Pow er-Dow n RESET Delay vs. Temperature Pow er-Dow n RESET Delay vs. Temperature
250 300
SGM8_L/M/J V OD = V T H - V CC SGM8_T/S/R/Z V OD = V T H - V CC
V OD = 10mV
250
Power-Down RESET (µs)

200

Power-Down RESET (µs)

V OD = 10mV
200
150
V OD = 20mV V OD = 20mV
150
100
100
V OD = 100mV V OD = 100mV V OD = 200mV
50 V OD = 200mV 50

0 0

-50 -30 -10 10 30 50 70 90 110 130 -50 -30 -10 10 30 50 70 90 110 130
Temperature (℃) Temperature (℃)

Pow er-Up RESET Delay vs. Temperature Supply Current vs. Temperature (No Load)
270 30
SGM8_S
265
25
Power-Down RESET (ms)

260
Supply Current (μA)

255 V CC = 5.5V
20
250
245 15
240 V CC = 3.6V
10
235
230 5
225
220 0
-50 -30 -10 10 30 50 70 90 110 130
-50 -30 -10 10 30 50 70 90 110 130
Temperature (℃) Temperature (℃)

Maximum Transient Duration Without Causing a Reset Pulse

Normalized RESET Voltage Threshold vs. Temperature vs. RESET Comparator Overdrive
1.008 400
Maximum Transient Duration (µs)

1.006 350
Normalized RESET Threshold

1.004
300
1.002 SGM8_L/M/J
250
1
0.998 200
0.996 150
0.994
100
0.992
50
0.99 SGM8_R/S/T/Z
0.988 0
-50 -30 -10 10 30 50 70 90 110 130 1 10 100 1000

Temperature (℃) RESET Comparator Overdrive V T H - V CC(mV)

SG Micro Corp JANUARY 2018

www.sg-micro.com
6
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

TYPICAL PERFORMANCE CHARACTERISTICS (continued)

RESET Output Voltage vs. Supply Voltage

Supply Voltage
5V P-P

RESET Output
2V/div

Voltage

SGM809R

SGM809S

200ms/div

SG Micro Corp JANUARY 2018

www.sg-micro.com
7
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

APPLICATION INFORMATION
Benefits of an Accurate Reset Threshold Interfacing to Other Devices’ Output
In other microprocessor supervisory circuits, tolerances The SGM803/SGM809/SGM810 series is designed to
in supply voltages lead to an overall increase in reset integrate with as many devices as possible, therefore,
tolerance levels due to the deterioration of the has a standard output dependent on VCC. This enables
microprocessor reset circuit’s power supply. The the parts to be used in both 3V and 5V, or any nominal
possibility of a malfunction during a power failure is voltage within the minimum and maximum
greatly reduced because the SGM803/SGM809/ specifications for VCC. This design simplifies interfacing
SGM810 series can operate effectively even when this device to other devices.
there are large degradations of the supply voltages.
Another advantage of the SGM803/SGM809/SGM810 Ensuring a Valid Reset Output Down to VCC
series is its very accurate internal voltage reference = 0V
circuit. These benefits combine to produce an When VCC falls below 1.0V, the SGM803/SGM809
exceptionally reliable voltage monitor circuit. RESET no longer sinks current. A high impedance
CMOS logic input connected to RESET may, therefore,
Interfacing to Microprocessors with drift to undetermined logic levels. To eliminate this
Multiple Interrupts problem, a 100kΩ resistor should be connected from
In a number of cases, it is necessary to interface many RESET to ground.
interrupts from different devices (for example, thermal, VCC

altitude, and velocity sensors). The SGM803/SGM809/

SGM810 can easily be integrated into existing interrupt- VCC
handling circuits, as shown in Figure 1, or can be used
as a standalone device. SGM809

RESET

4-LINE BCD TO GND

PRIORITY ENCODER
MICROPROCESSOR
74LS147

VCC
Figure 2. Ensuring a Valid Reset Output Down to VCC = 0V

VCC
Preventing the High Voltage Spike
To prevent the high voltage spike damage or to limit
SGM809 input VCC current, It is recommended to connect a
OTHER SENSING
DEVICES resistor R1 (0Ω to 1kΩ) in series to VCC, and one
RESET capacitor C1 (0.1µF to 4.7µF) should be connected
between VCC Pin and GND. The schematic is shown in
GND
Figure 3. It must be noted that, the input resistor will
affect output driving capability.

R1
Figure 1. Interfacing to Microprocessors with Multiple 0Ω ~ 1kΩ
Interrupts IN VCC RESET OUTPUT

C1
0.1µF ~ 4.7µF
SGM809

GND

Figure 3. Preventing the High Voltage Spike

SG Micro Corp JANUARY 2018

www.sg-micro.com
8
 Microprocessor Supervisory
SGM803/SGM809/SGM810 Circuit in 3-Pin SOT-23

DETAILED DESCRIPTIONS
Reset Timing
The reset signal is asserted low for the SGM809 and high for the SGM810 when the power supply voltage falls
below the threshold trip voltage and remains asserted for at least 150ms after the power supply voltage has risen
above the threshold.

Threshould
VCC Voltage

0V

240ms (TYP) 240ms (TYP)

RESET
* *
0V

RESET
* *

0V

VCC to RESET/RESET Delay VCC to RESET/RESET Delay

NOTE *: Undefined below minimum operating voltage.

Figure 4. Reset Timing Diagram

REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

JANUARY 2018 ‒ REV.E.2 to REV.E.3

Changed Reset Timing Diagram .......................................................................................................................................................................... 9

SEPTEMBER 2015 ‒ REV.E.1 to REV.E.2

Changed Electrical Characteristics section .......................................................................................................................................................... 5

JANUARY 2013 ‒ REV.E to REV.E.1

Added Recommended Land Pattern Information ......................................................................................................................................... 10, 11
Added Tape and Reel Information................................................................................................................................................................ 12, 13

SG Micro Corp JANUARY 2018

www.sg-micro.com
9
 PACKAGE INFORMATION

PACKAGE OUTLINE DIMENSIONS

SOT-23

E1 E 2.29
0.76

0.76
e

e1
0.95

RECOMMENDED LAND PATTERN (Unit: mm)

L1 L

A1 θ c
A2 0.25

Dimensions Dimensions
Symbol In Millimeters In Inches
MIN MAX MIN MAX
A 0.900 1.150 0.035 0.045
A1 0.000 0.100 0.000 0.004
A2 0.900 1.050 0.035 0.041
b 0.300 0.500 0.012 0.020
c 0.080 0.150 0.003 0.006
D 2.800 3.000 0.110 0.118
E 1.200 1.400 0.047 0.055
E1 2.250 2.550 0.089 0.100
e 0.950 BSC 0.037 BSC
e1 1.900 BSC 0.075 BSC
L 0.550 REF 0.022 REF
L1 0.300 0.500 0.012 0.020
θ 0° 8° 0° 8°

SG Micro Corp TX00031.000

www.sg-micro.com
 PACKAGE INFORMATION

PACKAGE OUTLINE DIMENSIONS

SOT-23-3

1.90
D

E1 E 2.59

0.99
e

e1
0.69 0.95

RECOMMENDED LAND PATTERN (Unit: mm)

A1 θ
A2 c
0.2

Dimensions Dimensions
Symbol In Millimeters In Inches
MIN MAX MIN MAX
A 1.050 1.250 0.041 0.049
A1 0.000 0.100 0.000 0.004
A2 1.050 1.150 0.041 0.045
b 0.300 0.500 0.012 0.020
c 0.100 0.200 0.004 0.008
D 2.820 3.020 0.111 0.119
E 1.500 1.700 0.059 0.067
E1 2.650 2.950 0.104 0.116
e 0.950 BSC 0.037 BSC
e1 1.900 BSC 0.075 BSC
L 0.300 0.600 0.012 0.024
θ 0° 8° 0° 8°

SG Micro Corp TX00032.000

www.sg-micro.com
 PACKAGE INFORMATION

TAPE AND REEL INFORMATION

REEL DIMENSIONS

TAPE DIMENSIONS

P2 P0

W
Q1 Q2 Q1 Q2 Q1 Q2
B0
Q3 Q4 Q3 Q4 Q3 Q4

Reel Diameter

P1 A0 K0

Reel Width (W1)

DIRECTION OF FEED

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF TAPE AND REEL

Reel Width
Reel A0 B0 K0 P0 P1 P2 W Pin1
Package Type W1
Diameter (mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
(mm)

SOT-23 7″ 9.5 3.15 2.77 1.22 4.0 4.0 2.0 8.0 Q3

DD0001
SOT-23-3 7″ 9.0 3.20 3.30 1.30 4.0 4.0 2.0 8.0 Q3

SG Micro Corp TX10000.000

www.sg-micro.com
 PACKAGE INFORMATION
CARTON BOX DIMENSIONS

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF CARTON BOX

Length Width Height

Reel Type Pizza/Carton
(mm) (mm) (mm)

7″ (Option) 368 227 224 8

DD0002

7″ 442 410 224 18

SG Micro Corp TX20000.000

www.sg-micro.com