Scribd
Upload
32 views1 page

CE 13001: Engineering Drawing and Graphics (Section: 02)

This document contains 3 questions asking to draw the projections of various 3D solids. Question 1 asks to draw the projections of a cylinder with a diameter of 120mm, axis of 200mm, inclined at 30 degrees to the vertical plane and with its axis inclined at 30 degrees to the ground line. Question 2 asks to draw the projections of a cube of 30mm edges resting on the horizontal plane with one corner having a diagonal perpendicular to the vertical plane. Question 3 asks to draw the projections of a hexagonal pyramid with an 80mm base, 190mm axis, with one slant edge on the ground and with a plane through that edge and axis perpendicular to the horizontal plane and inclined at 45 degrees to the vertical plane.

Uploaded by

Sitanta Kumar Biswas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

CE 13001: Engineering Drawing and Graphics (Section: 02)

This document contains 3 questions asking to draw the projections of various 3D solids. Question 1 asks to draw the projections of a cylinder with a diameter of 120mm, axis of 200mm, inclined at 30 degrees to the vertical plane and with its axis inclined at 30 degrees to the ground line. Question 2 asks to draw the projections of a cube of 30mm edges resting on the horizontal plane with one corner having a diagonal perpendicular to the vertical plane. Question 3 asks to draw the projections of a hexagonal pyramid with an 80mm base, 190mm axis, with one slant edge on the ground and with a plane through that edge and axis perpendicular to the horizontal plane and inclined at 45 degrees to the vertical plane.

Uploaded by

Sitanta Kumar Biswas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CE 13001: Engineering Drawing and Graphics [Section: 02]

Spring Semester 2018-2019


Marks:60 (3 × 20)

Projection of Solids

Q1: A cylinder of base diameter 120 mm and axis 200 mm has its axis inclined at 30
to the V.P. and the elevation of the axis is inclined at 30 to the ground line xy. Draw
the projections of the cylinder.
Q2: Draw the projections of a cube of 30 mm long edges resting on the H.P. and one
of its corners with a solid diagonal perpendicular to the V.P.; assume the cube to be
resting on one of its faces on the H.P. with a solid diagonal parallel to the V.P.
Q3: A hexagonal pyramid, base 80 mm side and with axis 190 mm long, has one of its
slant edges on the ground. A plane containing that edge and the axis is perpendicular
to the H.P. and inclined at 45 to the V.P. Draw its projections when the apex is
nearer the V.P. than the base.

You might also like