CMP PRODUCTS CABLE GLAND CATALOGUE

F E
CMP EXPLOSIVE ATMOSPHERES PRODUCTS

D A C

TECHNICAL DATA

A2F
Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444

Mechanical Classifications* Impact = Level 8, Cable Anchorage = Class B

Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
A2F Globally Approved, Explosive Atmosphere ATEX Certificate CML 18ATEX1321X, CML 18ATEX4313X
Cable Gland ^ II 2G, II 1D Ex db IIC Gb, Ex eb IIC Gb, Ex ta IIIC Da
Code of Protection
^ II 3G Ex nR IIC Gc
Compliance Standards EN 60079-0,1,7,15,31
For all types of Unarmoured & Braided Cables
IECEx Certificate IECEx CML 18.0179X, IECEx SIM 14.0006

Code of Protection Ex db IIC Gb, Ex eb IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da,
• Displacement type flameproof seal Compliance Standards IEC 60079-0,1,7,15,31
• Deluge protected CSA Certificate 1211841
• -60˚C to +130˚C (standard), -20˚C to 200˚C (ThermEx option) Class I, Div. 2 Groups B, C and D; Class II, Div. 2 Groups
Code of Protection E, F and G; Class III, Div. 2; Type 4X: Oil Resistant II:
• Globally marked, IECEx, ATEX & CSA Ex d IIC, Ex e II, Ex nR II
Compliance Standards C22.2 No 0,0.4, 94, 174, CAN/CSA-E60079-0,1,7,15
EAC Certificate
TC RU C-GB.AA87.B.00487
(Formerly GOST R, K & B)
UkrSEPRO UA.TR.047.C.0644-15

KCs KOSHA Certificate 13_GA4BO_0748X ; 13_GA4BO_0749X; 13_GA4BO_0750X; 14_GA4BO_0251X

NEPSI Certificate GYJ18.1249X

INMETRO Approval TÜV 12.0619X

CCOE / PESO Certificate (India) P333688

RETIE Approval Number 03866

Marine Approvals LRS: 01/00172, DNV: TAE000000Y, ABS: 14-LD234401A-4-PDA, BV: 43180 A1 BV

Ingress Protection Rating** IP66, IP67 & IP68***

Deluge Protection Compliance DTS01 : 91

Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium

Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer

Cable Type Unarmoured & Braided when terminated inside enclosure

Sealing Technique CMP Unique Displacement Seal Concept
Sealing Area(s) Cable Outer Sheath
* Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to page 7 or www.cmp-products.com for further information.
*** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request
Cable Gland Selection Table Dimensions listed below are for metric cable glands only
Refer to illustration at the top of the page. Dimensions for alternative threads may vary, please see supplementary technical data sheet
Available Entry Threads “C” Across Combined Ordering
(Alternate Metric Thread Lengths Available) Overall Cable Across
Corners Reference
Diameter “A” Flats “D” Cable
Cable Gland Standard Option “D” Protrusion (*Brass Metric)
Shroud Gland Weight
Size Thread Length “F”
Thread Length Ordering (Kgs)
Metric NPT Length (NPT) NPT Min Max Max Max Size Type
(Metric) “E” Suffix
“E”
16 M16 15.0 - - - 3.2 8.7 24.0 26.4 29.9 16 A2F 1RA PVC04 0.060
20S16 M20 15.0 ½” 19.9 ¾” 3.2 8.7 24.0 26.4 26.0 20S16 A2F 1RA PVC04 0.070
20S M20 15.0 ½” 19.9 ¾” 6.1 11.7 24.0 26.4 26.0 20S A2F 1RA PVC04 0.060
20 M20 15.0 ½” 19.9 ¾” 6.5 14.0 27.0 29.7 27.7 20 A2F 1RA PVC05 0.070
25 M25 15.0 ¾” 20.2 1” 11.1 20.0 36.0 39.6 35.5 25 A2F 1RA PVC09 0.130
32 M32 15.0 1” 25.0 1 ¼” 17.0 26.3 41.0 45.1 35.1 32 A2F 1RA PVC10 0.150
40 M40 15.0 1 ¼” 25.6 1 ½” 23.5 32.2 50.0 55.0 35.1 40 A2F 1RA PVC13 0.200
50S M50 15.0 1 ½” 26.1 2” 31.0 38.2 55.0 60.5 33.0 50S A2F 1RA PVC15 0.260
50 M50 15.0 2” 26.9 2 ½” 35.6 44.0 60.0 66.0 37.3 50 A2F 1RA PVC18 0.270
63S M63 15.0 2” 26.9 2 ½” 41.5 49.9 70.5 77.6 33.5 63S A2F 1RA PVC21 0.430
63 M63 15.0 2 ½” 39.9 3” 47.2 55.9 75.0 82.5 36.2 63 A2F 1RA PVC23 0.400
75S M75 15.0 2 ½” 39.9 3” 54.0 61.9 84.0 92.4 34.1 75S A2F 1RA PVC24 0.520
75 M75 15.0 3” 41.5 3 ½” 61.1 67.9 84.0 92.4 40.9 75 A2F 1RA PVC26 0.500
90 M90 24.0 3 ½” 42.8 4” 66.6 79.9 108.0 118.8 60.3 90 A2F 1RA PVC31 1.600
100 M100 24.0 3 ½” 42.8 4” 76.0 91.0 123.0 135.3 57.2 100 A2F 1RA LSF33 1.780
115 M115 24.0 4” 44.0 5” 86.0 97.9 133.4 146.7 67.3 115 A2F 1RA LSF34 2.670
130 M130 24.0 5” 46.8 - 97.0 114.9 152.4 167.6 74.7 130 A2F 1RA LSF35 3.800
*For material options add the following suffix to the Ordering Reference; Brass (no suffix required); Nickel Plated Brass ‘5’; 316 Grade Stainless Steel ‘4’; Copper Free Aluminium ‘1’
For NPT options add the following digits to the material suffix; ½” = 31; ¾” = 32; 1” = 33; 1 ¼” = 34; 1 ½” = 35; 2” = 36; 2 ½” = 37; 3” = 38; 3 ½” = 39; 4” = 310 (Brass requires prefix ‘0’)
Examples: 32A2F1RA534 = Nickel Plated Brass 1¼” NPT, 50SA2F1RA035 = Brass 1½” NPT, 25A2F1RA432 = Stainless Steel ¾” NPT, 20A2F1RA5 = Nickel Plated Brass M20
Dimensions are displayed in millimetres unless otherwise stated

TDS506 REV13 04/19 www.cmp-products.com