Global LCD Panel Exchange Center www.panelook.

com

SAMSUNG SECRET

Product Information

Customer : DATE : Feb. 21. 2012

SAMSUNG TFT-LCD

MODEL : LTA320AP32

The Information Described in this Specification is Preliminary and can be changed without
prior notice

LCD Business

Samsung Electronics Co . , LTD.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 1 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

Contents

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (7)

3. Electrical Characteristics ----------------------------------------------------------------------------- (10)

3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Inverter Input Condition & Specification

4. Input Terminal Pin Assignment --------------------------------------------------------------------- (13)

4.1 Input Signal & Power
4.2 Inverter Input Pin Configuration
4.3 Inverter Input Power sequence
4.4 LVDS Interface
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color

5. Interface Timing ----------------------------------------------------------------------------------------- (19)

5.1 Timing Parameters (DE only mode)
5.2 Timing Diagrams of interface Signal (DE only mode)
5.3 Power ON/OFF Sequence

6. Outline Dimension -------------------------------------------------------------------------------------- (22)

7. Packing ---------------------------------------------------------------------------------------------------- (23)

8. Marking & Others ------------------------------------------------------------------------------------- (24)

9. General Precaution ------------------------------------------------------------------------------------ (25)

9.1 Handling
9.2 Storage
9.3 Operation
9.4 Operation Condition Guide
9.5 Others

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 2 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
Revision History

Date Rev. No Page Summary

Jan.
30. 000 All First Issued
2012
4 Revise General information
7 Update the optical spec
Feb.
10 Update the electrical spec
21. 001
11 Update the BLU spec
2012
12-15 Update the inverter spec
23 Update the packing spec

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 3 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
General Description
Description
LTA320AP32 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT (Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a back light unit.
The resolution of a 32.0” is 1366 x 768 and this model can display up to 16.7 Million
colors with wide viewing angle of 89¶ or higher in all directions. This panel is intended to
support applications to provide a excellent performance for Flat Panel Display such as
Home-alone Multimedia TFT-LCD TV and High Definition TV.

Features
ƒ RoHS compliance (Pb-free)
ƒ High contrast & aperture ratio
ƒ PVA (Patterned Vertical Align) mode
ƒ Wide viewing angle (·178¶)
ƒ High speed response
ƒ HD resolution (16:9)
ƒ Direct U-Type 3 CCFLs (Cold Cathode Fluorescent Lamp)
ƒ DE (Data Enable) mode
ƒ LVDS (Low Voltage Differential Signaling) interface (1pixel/clock)

General Information

Items Specification Unit Note

760.0(HTYP) x 450.0(VTYP) ·1.0mm
Module Size mm
47.3 (DMAX) With inverter
Weight 5300 (max) g With inverter
Pixel Pitch 0.51075(H) x 0.51075(W) mm
Active Display Area 697.68(H) x 392.25(V) mm
Surface Treatment Haze 7, Hard-coating(3H) -

Display Colors 8 bit - 16.7M colors

Number of Pixels 1366 x 768 pixel

Pixel Arrangement RGB Vertical stripe -

Display Mode Normally Black -

Luminance of White 350 Typ. cd/m2

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 4 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD GND-0.5 13.2 V (1)

Storage temperature TSTG -20 65 ୅ (2)

Glass surface Center TOPR 0 50 ୅

temperature (2)
(Operation) T. Uniformity ୞T - 10 ୅
Shock ( non - operating ) Snop - 50 G (3)
Vibration ( non - operating ) Vnop - 1.5 G (4)

Note (1) Ta= 25 · 2 ¶C

(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 ¶C)
b. Relative Humidity is 90% or less. (Ta > 39 ¶C)
c. No condensation
(3) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

90

Fig. Temperature and Relative humidity range

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 5 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
(5) Definition of test point
5mm

5mm
1 2

̺
5

LCD Module (Active)

3 4

୞T should be less than 10 ୅ (ƸT = | TOPR – TMAX| )

TOPR : Temperature of the center of the glass surface (Test point 5)

T1~ T4 : Temperature of each edge of the glass surface
TMAX : The highest temperature of the glass surface

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 6 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

2. Optical Characteristics SAMSUNG SECRET

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : TOPCON RD-80S,TOPCON SR-3, ELDIM EZ-Contrast

(Ta = 25 · 2¶C, VDD=12V, fv= 60Hz, fDCLK=75MHz,Lamp current = 19.5 mA)

Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio (1)
C/R 3000 4,000 -
(Center of screen) SR-3
Response G-to-G (3)
Tg - 20 30 ms
Time (Avg) RD-80S
Luminance of White (4)
YL 300 350 - cd/m2
(Center of screen) Normal SR-3
Rx L,R=0 0.638
Red U,D=0
Ry 0.326
Gx Viewing 0.292
Green Angle
Color Gy 0.608
TYP. TYP. (5),(6)
Chromaticity
Bx -0.03 0.149 +0.03 SR-3
(CIE 1931)
Blue
By 0.055
Wx 0.280
White
Wy 0.290
(5)
Color Gamut - 68 70 - %
SR-3
(5)
Color Temperature - - 10,000 - K
SR-3
L 79 89 -
Hor.
Viewing R 79 89 - (6)
C/R≥10 Degree
Angle U 79 89 - EZ-Contrast
Ver.
D 79 89 -
Brightness Uniformity (2)
Buni - - 30 %
(9 Points) SR-3

- Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

Environment condition : Ta = 25 · 2 ¶C

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 7 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

Photo detector
Photo detector Field

SR-3 1ദ
RD-80S 2ദ Field

SR-3 : 50໅
RD-80S : 50໅
EZ-Contrast :0༃
TFT - LCD Module
LCD Panel

The center of the screen

- Definition of test point

228 683 1138

Active Area
128 ྡ ྠ ྟ
Test Point
384 ྞ ྜྷ ྜ

640 ྛ ྚ ྙ

Note (1) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 䐣 of the panel

G max
C/R
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 8 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

Note (2) Definition of 9 points brightness uniformity ( Test pattern : Full White )

( B max B min)
Buni  100
B max
Bmax : Maximum brightness
Bmin : Minimum brightness

Note (3) Definition of Response time : Sum of Tr, Tf

Display data Black (data off) White (data on) Black (data off)

TR TF
Optical Instruments
100%
Response
90%

10%
0%
TIME
୔GnT›–TnGaGhŒ™ˆŽŒG™Œš—–•šŒG›”ŒG‰Œ›žŒŒ•Gn™ˆ G›–GŽ™ˆ GOšŠˆ“ŒPG

Note (4) Definition of Luminance of White : Luminance of white at center point 䐣

Note (5) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point 䐣

Note (6) Definition of Viewing Angle

: Viewing angle range (C/R ≥10)

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 9 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.
Ta = 25¶C · 2 ¶C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 10.8 12.0 13.2 V (1)
(a) Black - 365 830 A
Current
of Power (b) White IDD - 370 830 A (2),(3)
Supply
(c) V-Stripe - - 1600 A
Vsync Frequency fV 48 60 66 Hz
Hsync Frequency fH 44 48 53 kHz
Main Frequency fDCLK 72 78 85 MHz
Rush Current IRUSH - - 4 A (4)

Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=60Hz, fDCLK = 75MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) V strip

(4) Measurement Conditions

VDD
100%
90%

10%
GND

TRUSH=470༕
Rush Current IRUSH can be measured when TRUSH. is 470༕.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 10 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

3.2 Back Light Unit

The back light unit contains 3 direct-lighting U-type CCFLs ( Cold Cathode Fluorescent
Lamp ). The characteristics of lamps are shown in the following tables.

Ta=25 · 2¶C

Socket

HOT 1

HOT 2

LCD
Inverter
Module

HOT 5

HOT 6

Item Symbol Min. Typ. Max. Unit Note

Operating Life Time Hr 40000 - - Hour (1)

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.
[Operating condition : Ta = 25·2୅, IL = 19.5mA, For single lamp only. ]
(2) The lamp starting voltage Vs should be applied to the lamp for more than 1second
under starting up duration. Otherwise the lamp could not be lighted on completed.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 11 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
3.3 Inverter Input Condition & Specification

Specifications
Items Symbol Conditions Unit Note
Min. Typ. Max.

Input
Vin - 22 24 26 V Ta=25·2 ¶C
Voltage
Input Vin = 24V
IRUSH - - 4.44 Arms (1)
Current Vdim = 3.3V

Output Vin = 24V

IO 18.5 19.5 20.5 mArms (2)
Current Vdim = 3.3V

Frequency FLAMP Vin = 24V 30 - 60 kHz -

Backlight ON Vin = 24V 2.4 - 5.5

V (3)
On/Off OFF Vin = 24V 0 - 0.8

Dimming Max Lum - - 3.3

VDIM V (4)
Control Min. Lum 0. - -

Note) Power Consumption is measured when 350[cd/m2] of luminance which is the typical luminance.
Lamp Current is measured at the point before Lamp.
(1) Max Value of the Power Consumption is measured during initial turn-on time* of the backlight.
(2) Max Value of the Power Consumption is measured after 120 min warm-up.
(3) Inverter pin NO.12 is for backlight On/Off.
(4) Inverter pin NO.13 is for dimming control.

* Additional Appendix for input current

Items Symbol Conditions Min. Typ. Max. Unit

Vin = 24V, Dim=3.3V
Iin _ overshoot - 3.62 3.86 Adc
Input (Within 1hr at BLU on)
Current Vin = 24V, Dim=3.3V
Iin _ saturation - 3.11 3.32 Adc
(After 1hr Aging)

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 12 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
4. Input Terminal Pin Assignment

4.1. Input Signal & Power Connector :IS100-L30O-C23

PIN No. Description PIN No. Description

1 9,19 16 /9B3

2 9,19 17 *1'
3 9,19 18 /9B1
4 9,19 19 /9B3
5 1& 20 *1'
6 *1' 21 /9&/.B1
7 *1' 22 /9&/.B3
8 1& 23 *1'
9 /9'6B6(/ 24 /9B1
10 1& 25 /9B3
11 *1' 26 *1'
12 /9B1 27 1&
13 /9B3 28 1&
14 *1' 29 1&
15 /9B1 30 *1'

Note1) No Connection: This PINS are only used ONLY for SAMSUNG.
Note2) LVDS OPTION : If this PIN is HIGH (3.3 V) → Normal LVDS format
LOW (GND) → JEIDA LVDS format

SEQUENCE : On = VDD(T1) ≥ LVDS Option ≥ Interface Signal(T2)

OFF = Interface Signal(T3) ≥ LVDS Option ≥ VDD

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 13 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

Note(1) Pin number starts from Left side

PCB
̷

Pin No. 1 Pin No. 30

#1 #30

#1 #30

Fig. Connector diagram

a. Power GND pins should be connected to the LCD’s metal chassis.

b. All power input pins should be connected together.
c. All NC pin should be separated from other signal or power.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 14 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
4.2 Inverter Input Pin Configuration
Connector : JST, S14B-PHA-SM-TB(LF)
Pin No. Pin Configuration (FUNCTION)

1 Vin (24 V)
2 Vin (24 V)
3 Vin (24 V)
4 Vin (24 V)
5 Vin (24 V)
6 GND
7 GND
8 GND
9 GND
10 GND
11 Error_out ( normal : GND, abnormal : open collector)
12 Backlight On /Off [ON: 2.4 ~ 5.5 V, OFF: 0 ~ 0.8 V]
13 Dimming Control [ 0V: Min, 3.3V: Max ]
14 External Dimming Control Signal

Note(1) If use Dimming Control, Pin 14 Must be N.C

If use External PWM, Pin 13 Must be N.C

4.3. Inverter Input Power Sequence

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 15 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
4.4 LVDS Interface
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA & VESA)
LVDS pin JEIDA -DATA VESA -DATA

TxIN/RxOUT0 R2 R0
TxIN/RxOUT1 R3 R1
TxIN/RxOUT2 R4 R2
TxOUT/RxIN0 TxIN/RxOUT3 R5 R3
TxIN/RxOUT4 R6 R4
TxIN/RxOUT6 R7 R5
TxIN/RxOUT7 G2 G0
TxIN/RxOUT8 G3 G1
TxIN/RxOUT9 G4 G2
TxIN/RxOUT12 G5 G3
TxOUT/RxIN1 TxIN/RxOUT13 G6 G4
TxIN/RxOUT14 G7 G5
TxIN/RxOUT15 B2 B0
TxIN/RxOUT18 B3 B1
TxIN/RxOUT19 B4 B2
TxIN/RxOUT20 B5 B3
TxIN/RxOUT21 B6 B4
TxOUT/RxIN2 TxIN/RxOUT22 B7 B5
TxIN/RxOUT24 HSYNC HSYNC
TxIN/RxOUT25 VSYNC VSYNC
TxIN/RxOUT26 DEN DEN
TxIN/RxOUT27 R0 R6
TxIN/RxOUT5 R1 R7
TxIN/RxOUT10 G0 G6
TxOUT/RxIN3 TxIN/RxOUT11 G1 G7
TxIN/RxOUT16 B0 B6
TxIN/RxOUT17 B1 B7
TxIN/RxOUT23 RESERVED RESERVED

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 16 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color

DATA SIGNAL
GRAY
DISPLAY
COLOR RED GREEN BLUE SCALE
(8bit)
LEVEL
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

BASIC CYAN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
COLOR RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

MAGENTA 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

DARK 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY ↑
: : : : : : : : : : : : : : : : : : R3~
SCALE
OF : : : : : : : : : : : : : : : : : : R252
RED ↓
LIGHT 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R253

0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R254

RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R255

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

DARK 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY ↑
SCALE : : : : : : : : : : : : : : : : : : G3~
OF : : : : : : : : : : : : : : : : : : G252
GREEN ↓
LIGHT 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G253

0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G254

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G255

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 B1

DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 B2
GRAY ↑
SCALE : : : : : : : : : : : : : : : : : : B3~
OF : : : : : : : : : : : : : : : : : : B252
BLUE ↓
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 B253

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 B254

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 B255

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 17 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
5. Interface Timing

5.1 Timing Parameters ( DE only mode )

SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE

Clock 1/TC 72 78 85 MHz -

Hsync Frequency FH 44 48 53 KHz -

Vsync FV 48 60 66 Hz -
Active
Display TVD - 768 - lines -
Vertical Period
Display Term
Vertical
TV 780 802 1200 lines -
Total
Active
Display THD - 1366 - clocks -
Horizontal Period
Display Term
Horizontal
TH 1460 1624 2000 clocks -
Total

Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V

5.2 LVDS Input Data Characteristics

SYMBO
ITEM Min. Typ. Max. Unit Note
L

Input Data tRSRM - - 400 ps

Fin=85MHz
Position
tRSLM -400 - - ps

Input common mode VSSL+ VDDL -

voltage
VCM 0.6
1.2
0.6
V

Differential Input
Voltage |VID| 100 - 600 mV

note) When the skew is measured the Spread Spectrum should be 0%

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 18 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

5.2 Timing diagrams of interface signal ( DE only mode )

TV

TVD

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

{j
{jo {Š“

kjsr WU\G
}jj

{kz {ko

kpzwsh€ WU\G
kh{h }jj

{lz

kl WU\G
}jj

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 19 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

5.3 Power ON/OFF Sequence

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.

2ms<T1≤10ms
0<T2≤50ms
0<T3≤50ms
1000ms≤T4

1000ms≤T5
(Recommend Value)
100ms≤T6
(Recommend Value)

T1 : VDD rising time from 10% to 90%

T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.

ƒ The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
ƒ Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
ƒ In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
ƒ T4 should be measured after the Module has been fully discharged between power off
and on period.
ƒ Interface signal should not be kept at high impedance when the power is on.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 20 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
7. PACKING

7.1 CARTON (Internal Package)

(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method

7.2 Packing Specification

Item Specification Remark

1. 4.3 Kg/ LCD (15ea)

LCD Packing 15ea / Box 2. 13 kg / Packing – Pallet Box
(Packing-Pallet Box) 3. Box Material : Paper
4. Packing Pallet Box Material : Paper

Pallet 2 Box / Pallet 1. Pallet Weight : 4.8 Kg

Packing Direction Vertical

Total Pallet Size H X V X Height 1137mm (H) x 840mm (V) x 485mm (Height)

Total Pallet
159.8Kg
Weight

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 23 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
8. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.

(1) Parts number : LTA320AP32

(2) Revision: Three letters
(3) Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)

Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
(4) Nameplate Indication

Week code : 05 29
week
LTA320AP32
year
0730 40mm

[[[[[[[[[[ [[[
Revision code
MADE IN CHINA
Lot number

80mm
(5) Packing box attach

100mm
OWD653DS65 Part number

[[[[
63

Box serial number

165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 24 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
9. General Precautions
9.1 Handling

(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.

(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.

(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFL back light.

(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.

(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.

(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
Semiconductor would be damaged.

(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.

(k) Do not disassemble the Module.

(l) Do not disassemble shield case of inverter & LVDS board.

(m) Do not connect N.C pins. (Samsung internal use only)

(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handle a module

(o) Pins of I/F connector should not be touched directly with bare hands.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 25 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET

9.2 Storage

ITEM UNIT Min. Max.

Storage Temperature (୅) 5 40
Storage Humidity (%rH) 35 75
Storage Life 12 months
- The storage room should provide good ventilation and
temperature control.
- Products should not be placed on the floor, but on the
Pallet away from a wall.
- Prevent products from direct sunlight, moisture nor
water; Be cautious of a build up of condensation.
Storage Condition - Avoid other hazardous environment while storing
goods.
- If products delivered or kept in conditions of over the
storage period of 3months, the recommended
temperature or humidity range, we recommend you
leave them at a temperature of 20୅ and a humidity of
50% for 24 hours.

9.3 Operation

(a) Do not connect or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFL) and
may require higher startup voltage(Vs).

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 26 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

SAMSUNG SECRET
9.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20·15୅
- Humidity : 55·20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

9.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LTA320AP32 Doc. No 06-001-G-120221 Page 27 / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com