Scribd
Upload
108 views1 page

Application Examples: Multi-Function Timer

The multi-function timer can be used to delay or time loads through four functions: delayed ON, interval/one-shot, and symmetrical recycling with the OFF or ON cycle first. It has a 250VAC 5A rating, with options for 24/48/110VDC or 24VAC/DC. The timer settings include function, time range from 0.2 seconds to 100 hours, scale from 2-100 seconds/minutes/hours, and adjustable time from 10-100% of the set value.

Uploaded by

RICHARD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views1 page

Application Examples: Multi-Function Timer

The multi-function timer can be used to delay or time loads through four functions: delayed ON, interval/one-shot, and symmetrical recycling with the OFF or ON cycle first. It has a 250VAC 5A rating, with options for 24/48/110VDC or 24VAC/DC. The timer settings include function, time range from 0.2 seconds to 100 hours, scale from 2-100 seconds/minutes/hours, and adjustable time from 10-100% of the set value.

Uploaded by

RICHARD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Multi-Function Timer

ON Delay, Interval (One shot), AT 100


Symmetrical Recycling

WIRING EXAMPLE Application Examples


~
+ • Delayed energisation of loads on power-up.
• Energisation of loads for a set period of time.
• Alternating operation of two loads in equal intervals
A1 15 25

Features
• Delayed ON, Interval (one shot) or symmetrical recycling
(OFF first or ON first)
16 18 A2 26 28
• Power ON LED flashes when unit is timing
• 5A/250VAC rating per relay contact
SUPPLY RELAY
TYPE VOLTAGE AC/DC CONTACTS
ORDERING
A-LINE CODE AT100 / 250 A D

Technical Specification
Time Time Setting: Time Range
Power Supply: Setting accuracy: 5% Scale
Selection
10 to 100% Selection:
sec, min, hrs
Repeatability: 0.5% 2 0.2 to 2 Sec, min, hrs

AC: 24, 250 (ie. 90-250) 400 (ie. 380-415) V ±15% 5 0.5 to 5 Sec, min, hrs
10 1 to 10 Sec, min, hrs
DC: 48, 60, 110 VDC ±10% 20 2 to 20 Sec, min, hrs

AC/DC: 24 (ie. 12 or 24) V Relay: 50 5 to 50 Sec, min, hrs


100 10 to 100 Sec, min, hrs
2 x DPDT
Note: 400V units have a 45mm wide housing 1 x SPDT & 1 instantaneous (available on request)

Description of Controls
back A1 15 L1: The red “Relay ON” LED illuminates when the relay is energised.
front
A-LINE AT100 L2: The green “Power ON” LED illuminates when power is supplied to the unit. The LED flashes
Multi-Function Timer
1
2
when the unit is timing. Before the relay switches, the flash rate increases.
3 S1
Function 4 S1: The Timing Function is set on S1.
L1 Position 1: Delayed ON Operation
sec.
Position 2: Interval (one shot) Operation
Range
min. S2 Position 3: Symmetrical Recycling, OFF Cycle First
hrs.
L2 10
Position 4: Symmetrical Recycling, OFF Cycle First
5 20
2 50 S3 S2: The Time Range is set on S2.
Scale
100 Sec Seconds
40% Min: Minutes
70% Hrs: Hours
10%
P1
Time Set 100%
S3: The Time Scale is set on P3. The time scales are 2, 5, 10, 20, 50 & 100.
front P1: The Time Setting is adjusted on P1. The time setting can be adjusted from 10% to 100% of the
back 16 18 A2 selected time. (The selected time is the time range multiplied by the time scale).

Operational Diagrams
Function 1 : Delayed ON Operation Function 3 : Symmetrical Recycling, OFF cycle first
Power ON Power ON

T T T T
Relay ON T T Relay ON T T T T

Function 2 : Interval Operation Function 4 : Symmetrical Recycling, ON cycle first

Power ON Power ON

T T T T T T
Relay ON Relay ON T T T T

T = Set time

You might also like