V UM

A P D ec Ene gy MOS
U PH AP P
M M

A P A B BA B BA A PU

PH U
M
AP
ORDER NO.
– + – + M MAX

RRV1912
The illustration shows the A-307R.

STEREO AMPLIFIER

A-307R
A-207R
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model The voltage can be converted by the
Type Power Requirement
A-307R A-207R following method.
MYXJ/EW AC220-230V ––––
MYXJ/GR AC220-230V ––––
MVXJ – AC220-230V ––––
SAMXJ – AC110V/120-127V/220V/240V With the voltage selector
SDXJ – AC110V/120-127V/220V/240V With the voltage selector

CONTENTS
1. SAFETY INFORMATION ...................................... 2 7. GENERAL INFORMATION ................................ 26
2. EXPLODED VIEWS AND PARTS LIST ................ 3 7.1 IC ................................................................. 26
3. SCHEMATIC DIAGRAM ....................................... 6 7.2 DISASSEMBLY ........................................... 27
4. PCB CONNECTION DIAGRAM .......................... 14 7.3 BLOCK DIAGRAM ....................................... 28
5. PCB PARTS LIST ............................................... 22 8. PANEL FACILITIES AND SPECIFICATIONS .... 29
6. ADJUSTMENT .................................................... 25

PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Lane Crawford Place, Singapore 0923
c PIONEER ELECTRONIC CORPORATION 1998
T - IZK APR. 1998 Printed in Japan
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

1. SAFETY INFORMATION
This service manual is intended for qualified service technicians ; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained
to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
Lead in solder used in this product is listed by the California Health and Welfare agency as a known reproductive toxicant which may
cause birth defects or other reproductive harm (California Health & Safety Code, Section 25249.5).
When servicing or handling circuit boards and other components which contain lead in solder, avoid unprotected skin contact with
the solder. Also, when soldering do not inhale any smoke or fumes produced.

NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must
be of identical designation.

REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pièces
de remplacement doivent avoir la même désignation.

(FOR USA MODEL ONLY)

1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE LIMITS

OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL
The following check should be performed for the
continued protection of the customer and service SHOCK HAZARD AND MUST BE CORRECTED BEFORE
technician. RETURNING THE APPLIANCE TO THE CUSTOMER.

LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water 2. PRODUCT SAFETY NOTICE
pipe, conduit, etc.) by connecting a leakage current tester Many electrical and mechanical parts in the appliance
such as Simpson Model 229-2 or equivalent between the have special safety related characteristics. These are
earth ground and all exposed metal parts of the appliance often not evident from visual inspection nor the protection
(input/output terminals, screwheads, metal overlays, control afforded by them necessarily can be obtained by using
shaft, etc.). Plug the AC line cord of the appliance directly replacement components rated for voltage, wattage, etc.
into a 120V AC 60Hz outlet and turn the AC power switch Replacement parts which have these special safety
on. Any current measured must not exceed 0.5mA. characteristics are identified in this Service Manual.
Electrical components having such features are identified
by marking with a on the schematics and on the parts list
Reading should in this Service Manual.
Leakage not be above The use of a substitute replacement component which does
Device current 0.5mA
under tester not have the same safety characteristics as the PIONEER
test recommended replacement one, shown in the parts list in
Test all this Service Manual, may create shock, fire, or other hazards.
exposed metal Product Safety is continuously under review and new
surfaces
instructions are issued from time to time. For the latest
information, always consult the current PIONEER Service
Manual. A subscription to, or additional copies of, PIONEER
Also test with
plug reversed Earth Service Manual may be obtained at a nominal charge from
(Using AC adapter ground PIONEER.
plug as required)

AC Leakage Test

2
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

2. EXPLODED VIEWS AND PARTS LIST

NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screws adjacent to mark on the product are used for disassembly.
2.1 PACKING
MVXJ type Only (1) PACKING PARTS LIST
19 20
17 Except Mark No. Description Part No.
MVXJ type
1 Operating Instructions See Contrast table(2)
18 (English)
2 Operating Instructions See Contrast table(2)
(German)
5 15 3 Operating Instructions See Contrast table(2)
(SAMXJ type
Only) (French/Italian/Dutch/Swedish/Spanish/Portugese)
12 6
7 1 (Except NSP 4 Warranty Card See Contrast table(2)
5 Remote Control Unit (CU-A014) AXD7163
MYXJ/GR type)
6 Battery Cover AZN2249
2 (MYXJ/EW and NSP 7 Dry Cell Battery (R6P,AA) VEM-013
MYXJ/GR types 8 Side Pad L AHA7205
Only)
13 9 Side Pad R AHA7206
3 (MYXJ/EW
type Only) 10 Sub Pad AHA7218
8 4 (MYXJ/EW, 11 Packing Case See Contrast table(2)
FR
ON MYXJ/GR and NSP 12 Literature Bag AHG1180
T MVXJ types 13 Packing Sheet AHG7015
10 Only)
14 (SAMXJ 14 Operating Instructions See Contrast table(2)
type Only) (Chinese)
15 Caution Label 220V See Contrast table(2)
21 (SDXJ
type Only) 16 Case Label See Contrast table(2)
NSP 17 Air Cap See Contrast table(2)
9
18 Power Cord See Contrast table(2)
19 Power Cord with Fuse See Contrast table(2)
20 Fuse (T5A) See Contrast table(2)
21 Operating Instructions See Contrast table(2)
16 (SAMXJ (Spanish/Chinese)
11 type Only)

(2) CONTRAST TABLE

A-307R/MYXJ/EW, MYXJ/GR, SAMXJ, SDXJ, A-207R/MYXJ/EW, MYXJ/GR and MVXJ are constructed the same
except for the following :
Part No.
Mark No. Symbol and Description A-307R A-207R Remarks
MYXJ/EW MYXJ/GR SAMXJ SDXJ MYXJ/EW MYXJ/GR MVXJ
1 Operating Instructions (English) ARB7138 Not used ARB7142 ARB7142 ARB7138 Not used ARB7138
2 Operating Instructions (German) ARC7183 ARC7183 Not used Not used ARC7183 ARC7183 Not used
3 Operating Instructions (French/Italian/ ARC7184 Not used Not used Not used ARC7184 Not used Not used
Dutch/Swedish/Spanish/Portuguese)
NSP 4 Warranty Card ARY7009 ARY7009 Not used Not used ARY7009 ARY7009 ARY7009

11 Packing Case AHD7563 AHD7563 AHD7581 AHD7564 AHD7561 AHD7561 AHD7561

14 Operating Instructions (Chinese) Not used Not used ARC7186 Not used Not used Not used Not used
15 Caution Label 220V Not used Not used ARR1003 Not used Not used Not used Not used
16 Case Label Not used Not used ARW7032 Not used Not used Not used Not used
NSP 17 Air Cap Not used Not used Not used Not used Not used Not used AHG1087

18 Power Cord ADG1154 ADG1154 ADG7018 ADG1158 ADG1154 ADG1154 Not used
19 Power Cord with Fuse Not used Not used Not used Not used Not used Not used ADG1156
20 Fuse (T5A) Not used Not used Not used Not used Not used Not used AEK1046
21 Operating Instructions Not used Not used Not used ARC7185 Not used Not used Not used
(Spanish/Chinese)

3
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

2.2 EXTERIOR

39
26

36 39

39
26
39

A-307R
Only

24
39
A-307R/ 43
SAMXJ and 39
SDXJ Types
Only
15
15
8
6 4
35 3

15
1
34
37 15

39
5 7

28 2
25

18
41 9 17 13 A-307R/SAMXJ
42
16 39 and SDXJ
38 Types Only
30 or 45 11
41 39 A-307R
27 39 39 /SAMXJ
39 Type Only

27 29 or 44 46
19 40
23
20 19
A-307R Only
23
31
12
33
22
31 23
32 39 14

39 17

21 20
A-307R Only
14
21
39

4
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

(1) EXTERIOR PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 FRONT L Assy AWX7123 26 Screw PBA1096
2 FRONT R Assy AWX7124 27 LED Lens AAK2459
3 OPT Assy AWX7125 28 IR Filter AAK7532
4 AC PRIMARY Assy See Contrast table(2) 29 LED Lens T See Contrast table(2)
NSP 5 HEADPHONE Assy AWX7114 30 Name Plate See Contrast table(2)

6 VOLUME Assy AWX7118 31 Rotary Knob A AAB7148

7 AF Assy See Contrast table(2) 32 Rotary Knob B AAB7149
8 Fuse (FU1) See Contrast table(2) 33 Volume Knob AAB7150
9 Flexible Cable (19P) ADD7032 34 Speaker Button AAD7435
(AF CN202-FRONT R CN601) 35 Power Joint AAD7439
10 •••••
36 Bonnet Case ANE7183
11 Power Transformer (T1) See Contrast table(2) 37 Panel Base AMB7489
NSP 12 Chassis ANA7064 38 Front Panel See Contrast table(2)
13 Rear Panel See Contrast table(2) 39 Screw BBZ30P080FZK
14 Insulator PNW2766 40 Screw BCZ30P060FCC
15 Screw ABA1018
41 Nut NK90FUC
16 Screw ABA1027 42 Voltage Selector (S2) See Contrast table(2)
17 Screw (4 × 10) ABA7047 43 Fuse (FU2, FU3 : 2A) See Contrast table(2)
18 Nut ABN-065 44 LED Lens A See Contrast table(2)
19 PCB Support AEC7006 45 PIONEER Badge See Contrast table(2)
20 Rubber Spacer See Contrast table(2)
46 Label (Rear Base) See Contrast table(2)
NSP 21 PCB Holder AEC7057
NSP 22 Cord Clamp F AEC7134
23 PCB Mold AMR2533
NSP 24 Damping Plate See Contrast table(2)
NSP 25 Shield Plate ANK7043

(2) CONTRAST TABLE

A-307R/MYXJ/EW, MYXJ/GR, SAMXJ, SDXJ, A-207R/MYXJ/EW, MYXJ/GR and MVXJ are constructed the same
except for the following :
Part No.
Mark No. Symbol and Description A-307R A-207R Remarks
MYXJ/EW MYXJ/GR SAMXJ SDXJ MYXJ/EW MYXJ/GR MVXJ
4 AC PRIMARY Assy AWX7113 AWX7113 AWX7115 AWX7115 AWX7113 AWX7113 AWX7113
7 AF Assy AWX7119 AWX7119 AWX7119 AWX7119 AWX7117 AWX7117 AWX7117
8 Fuse (FU1 : 2A) REK1025 REK1025 Not used Not used Not used Not used Not used
8 Fuse (FU1 : 2.5A) Not used Not used REK1026 Not used Not used Not used Not used
8 Fuse (FU1 : 6.3A) Not used Not used Not used REK1030 Not used Not used Not used
8 Fuse (FU1 : 1.25A) Not used Not used Not used Not used REK1023 REK1023 REK1023

11 Power Transformer (T1 : AC220-230V) ATS7188 ATS7188 Not used Not used ATS7190 ATS7190 ATS7190
11 Power Transformer Not used Not used ATS7189 ATS7189 Not used Not used Not used
(T1 : AC110V/120-127V/220V/240V)
13 Rear Panel ANC7643 ANC7643 ANC7645 ANC7644 ANC7639 ANC7639 ANC7639
20 Rubber Spacer AEC7034 AEC7034 AEC7034 AEC7034 Not used Not used Not used

NSP 24 Damping Plate AMR7216 AMR7216 AMR7216 AMR7216 Not used Not used Not used
29 LED Lens T AAK7544 AAK7544 AAK7544 AAK7544 Not used Not used Not used
30 Name Plate AAM7004 AAM7004 AAM7004 AAM7004 Not used Not used Not used
38 Front Panel ANB7114 ANB7114 ANB7114 ANB7114 AMB7493 AMB7493 AMB7493
42 Voltage Selector (S2) Not used Not used AKX-507 AKX-507 Not used Not used Not used

43 Fuse (FU2, FU3 : 2A) Not used Not used REK1025 REK1025 Not used Not used Not used
44 LED Lens A Not used Not used Not used Not used AAK7537 AAK7537 AAK7537
45 PIONEER Badge Not used Not used Not used Not used PAM1755 PAM1755 PAM1755
46 Label (Rear Base) Not used Not used PRW1499 Not used Not used Not used Not used

5
Downloaded from www.Manualslib.com manuals search engine
 1 2 3 4
A-307R, A-207R

3. SCHEMATIC DIAGRAM
A
3.1 OVERALL CONNECTION DIAGRAM

B F
HEADPHONE ASSY FRONT R ASSY
AWX7114 AWX7124

D
AF ASSY
AWX7119(A-307R)
AWX7117(A-207R)

451

A
VOLUME ASSY
AWX7118

6
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-307R, A-207R

Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".

E
FRONT L ASSY
AWX7123

B
AC POWER CORD

C ADG1154 : MYXJ/EW, MYXJ/GR types

AC PRIMARY ASSY
G AWX7113
(MYXJ/EW, MYXJ/GR, MVXJ)
ADG1156 : MVXJ type

OPT ASSY AWX7115

AWX7125 (SDXJ, SAMXJ)
ADG1158 : SDXJ type

MYXJ/EW, MYXJ/GR, MYXJ/EW, MYXJ/GR types

MVXJ types SDXJ type
POWER TRANSFORMER SAMXJ type
ATS7188 : A-307R/MYXJ/EW, MYXJ/GR ( )
ATS7190 : A-207R/MYXJ/EW, MYXJ/GR and NVXJ ADG7018 : SAMXJ type
A-307R
(13)

(15) A-307R/SDXJ, SAMXJ

(17)

S2 : AKX-507
VOLTAGE
SELECTOR

POWER TRANSFORMER
ATS7189

7
Downloaded from www.Manualslib.com 5manuals search engine 6 7 8
 1 2 3 4
A-307R, A-207R

3.2 VOLUME AND HEADPHONE ASSEMBLIES

A

B
HEADPHONE ASSY
AWX7114
D J551A

: AUDIO SIGNAL ROUTE

A VOLUME ASSY
AWX7118

J3
C

D CN203

8 A B
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 1 2 3 4
A-307R, A-207R

3.3 AC PRIMARY ASSY

• NOTE FOR FUSE REPLACEMENT A

CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.

REPLACE WITH SAME TYPE AND RATINGS ONLY.

MYXJ/EW, MYXJ/GR, MVXJ types

C AC PRIMARY ASSY
AWX7113 (MYXJ/EW, MYXJ/GR, MVXJ)
AWX7115 (SDXJ, SAMXJ) MYXJ/EW, MYXJ/GR, types

SDXJ type

SAMXJ type

SDXJ, SAMXJ
types

REK1025 POWER
T2AL250V
LIVE
S801
ASG1035 TO
AC POWER B
TO POWER MYXJ/EW, CORD
TRANSFORMER MYXJ/GR,
MVXJ types

NEUTRAL

REK1025
T2AL250V

A-307R
SDXJ, SAMXJ

TO S2
VOLTAGE
SELECTOR

3
C 9
Downloaded from www.Manualslib.com 1manuals search engine 2 4
 1 2 3 4
A-307R, A-207R

3.4 AF ASSY
: AUDIO SIGNAL ROUTE

AF ASSY
D AWX7119 (A-307R)
AWX7117 (A-207R)

C313,C337 :

IDLE ADJ.
B (L CH)

C314,C338 :

C
DLE ADJ.
(R CH)

A CN501
10 D
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-307R, A-207R

CAUTION : FOR CONT NUED PROTECTION AGA NST

RISK OF FIRE. REPLACE ONLY WITH
SAME TYPE NO. 491001 MFD, BY
LITTELFUSE INK. FOR IC454 (AEK7009).

A-307R A-207R
ACH7048 ACH7080
C451
(10000/42) (6800/42)
ACH7049 ACH7081
C452
(10000/42) (6800/42)

TRANSFORMER
B

TO POWER
R361–R366:

Q333–Q336:
C321–C324:

B J551
F CN601

7
D 11
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4
A-307R, A-207R

3.5 FRON L, FRONT R AND OPT ASSEMBLIES

A G E FRONT L ASSY
OPT ASSY AWX7123
AWX7125

CN502
A
C
CN202
D

FRONT L ASSY
S702 : LOUDNESS
S703 : SPEAKER A
S704 : SPEAKER B

12 E F G
1 2 3 4
Downloaded from www.Manualslib.com manuals search engine
 5 6 7 8
A-307R, A-207R

F FRONT R ASSY
AWX7124

INPUT
SELECTOR

FRONT R ASSY
S601 : INPUT SELECTOR
CD
TUNER
PHONE D
LINE
TAPE1/MD
S602 : DIRECT
S603 : TAPE2 MONITOR

7
F 13
Downloaded from www.Manualslib.com 5manuals search engine 6 8
 1 2 3 4
A-307R, A-207R

4. PCB CONNECTION DIAGRAM

4.1 VOLUME ASSY
NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for
A
diagrams. several destinations.
2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to
diagrams is shown below. check with the schematic diagram.
Symbol In PCB Symbol In Schematic 4. View point of PCB diagrams.
Part Name
Diagrams Diagrams
B C E B C E
Connector Capacitor
Transistor
B C E

B C E B C E SIDE A
Transistor
B C E with resistor

D G S D G S
Field effect
D G S transistor
P.C.Board Chip Part SIDE B

Resistor array
A VOLUME ASSY
B 3-terminal
regulator

E J3

Q513,Q514

SIDE A
VR501

C
(ANP7232-A)
D CN203
A VOLUME ASSY

Q504,Q501

Q502,Q503

SIDE B

D Q506,Q505

Q508,Q507

Q510,Q509

14 A 1
Downloaded from www.Manualslib.com 2
manuals search engine 3
(ANP7232-A)

4
 1 2 3 4
A-307R, A-207R

4.2 HEADPHONE AND AC PRIMARY ASSEMBLIES

A

B HEADPHONE ASSY B HEADPHONE ASSY

(ANP7232-A) (ANP7232-A)
SIDE A D J551A SIDE B

C AC PRIMARY ASSY
POWER B
TRANSFORMER

VOLTAGE
SELECTOR
(SDXJ and SAMXJ
Types)
SIDE A
AC POWER
CORD

(ANP7232-A)
C
C AC PRIMARY ASSY

SIDE B

(ANP7232-A)

Downloaded from www.Manualslib.com 1manuals search engine 2 3

B C 4
15
 1 2 3 4
A-307R, A-207R

4.3 AF ASSY

D AF ASSY

POWER
TRANSFORMER

16 D 1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-307R, A-207R
SIDE A

A
Q153

Q341

IC101

IC451-IC453

F CN601
B

Q333-Q336

Q324,Q326

VR302
Q452

IC301
A CN501
Q451

VR301

Q323,Q325

IC454

B J551

Downloaded from www.Manualslib.com 5manuals search engine

(ANP7232-A)

6 7
D 8
17
 1 2 3 4
A-307R, A-207R

D AF ASSY
A

18 D1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 5 6 7 8
A-307R, A-207R
SIDE B

Q151
IC151 A
Q152
Q338,Q337

Q340,Q339

Q102

Q101

Q104

B
Q103

Q332
Q328,Q327

Q318,Q330

Q322,Q320

Q316,Q314
C
Q312,Q310

Q304,Q303
Q311,Q309
Q315,Q313

Q321,Q319

Q317,Q329

Q331,Q343

Downloaded from www.Manualslib.com 5manuals search engine

(ANP7232-A)
6 7
D8
19
 1 2 3 4
A-307R, A-207R

4.4 FRONT L ASSY

A
E FRONT L ASSY
G J603A A CN502 F J602

VR751
VR752

Q707
Q708

(ANP7231-A)
B SIDE A

E FRONT L ASSY

Q704,Q705
Q702,Q703
Q701,IC751

(ANP7231-A)
C
SIDE B

20
E
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
 1 2 3 4
A-307R, A-207R

4.5 FRONT R AND OPT ASSEMBLIES

F FRONT R ASSY A

IC601

VR601

E J602A D CN202 (ANP7231-A)

SIDE A
F FRONT R ASSY

Q601-Q606

Q614-Q616 C

Q608-Q613

(ANP7231-A)
SIDE B

G OPT ASSY G OPT ASSY

D

E J603
(ANP7231-A) (ANP7231-A)

SIDE A SIDE B

Downloaded from www.Manualslib.com 1manuals search engine 2 3

F G 4
21
 A-307R, A-207R

5. PCB PARTS LIST

NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω → 56 × 101 → 561 ........................................................ RD1/4PU 5 6 1 J
47k Ω → 47 × 103 → 473 ........................................................ RD1/4PU 4 7 3 J
0.5 Ω → R50 ..................................................................................... RN2H R 5 0 K
1Ω → 1R0 ..................................................................................... RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω → 562 × 101 → 5621 ...................................................... RN1/4PC 5 6 2 1 F

LIST OF WHOLE PCB ASSEMBLIES

Part No.
Mark Symbol and Description A-307R A-207R Remarks
MYXJ/EW MYXJ/GR SAMXJ SDXJ MYXJ/EW MYXJ/GR MVXJ
NSP AF COMPLEX ASSY AWM7358 AWM7358 AWM7359 AWM7359 AWM7357 AWM7357 AWM7357
VOLUME ASSY AWX7118 AWX7118 AWX7118 AWX7118 AWX7118 AWX7118 AWX7118
NSP HEADPHONE ASSY AWX7114 AWX7114 AWX7114 AWX7114 AWX7114 AWX7114 AWX7114
AC PRIMARY ASSY AWX7113 AWX7113 AWX7115 AWX7115 AWX7113 AWX7113 AWX7113
AF ASSY AWX7119 AWX7119 AWX7119 AWX7119 AWX7117 AWX7117 AWX7117

NSP CONTROL ASSY AWG7013 AWG7013 AWG7013 AWG7013 AWG7013 AWG7013 AWG7013
FRONT L ASSY AWX7123 AWX7123 AWX7123 AWX7123 AWX7123 AWX7123 AWX7123
FRONT R ASSY AWX7124 AWX7124 AWX7124 AWX7124 AWX7124 AWX7124 AWX7124
OPT ASSY AWX7125 AWX7125 AWX7125 AWX7125 AWX7125 AWX7125 AWX7125

Mark No. Description Part No. Mark No. Description Part No.

A VOLUME ASSY B HEADPHONE ASSY

SEMICONDUCTORS CAPACITORS
Q513,Q514 2SK246 C551,C552 CKSQYB392K50
Q501-Q510 2SK303
Q511 DTC124EK
D505,D506,D509,D510 1SS352
OTHERS
D501-D504,D507,D508 1SS355 3P CABLE HOLDER 51063-0305
J552 CORD WITH PLUG DE005WE0
JA501 HEADPHONE JACK RKN1002
CAPACITORS J551 JUMPER WIRE D15A03-150-2651
C501,C502 CCSQCH271J50
C513,C514 CEAT100M50
C516 CEAT330M25
C503,C504 CFTYA473J50
C515 CKCYF103Z50 C AC PRIMARY ASSY
C511 CKSQYF473Z50
(1) CONTRAST TABLE
AWX7113 and AWX7115 are constructed the same except
RESISTORS for the following :
R530 RS1/10S100J Part No.
Mark Symbol and Description Remarks
VR501 ACX7021 AWX7113 AWX7115
Other Resistors RS1/10S J H3-H6 FUSE CLIP Not used AKR7001
3P OUTLET Not used AKP1053
OTHERS (2) PARTS LIST FOR AWX7113
CN501 16P SOCKET KP200TA16L
CN502 CONNECTOR 7P KPE7 SWITCH
PCB BINDER VEF1040 S801 ASG1035

CAPACITORS
C801,C802 (0.01µF/AC250V) ACG7020

OTHERS
CN801 AC INLET AKP7005
H1,H2 FUSE CLIP AKR7001
22
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

Mark No. Description Part No. Mark No. Description Part No.
CAPACITORS
D AF ASSY C451 (10000µF/42V) ACH7048
(1) CONTRAST TABLE C452 (10000µF/42V) ACH7049
C329,C331 CCCSL101K2H
AWX7119 and AWX7117 are constructed the same except C313-C316,C337-C340 CCSQCH121J50
for the following : C153,C154 CCSQCH151J50
Part No.
Mark Symbol and Description Remarks C303,C304 CCSQCH221J50
AWX7119 AWX7117
C451 (10000µF/42V) ACH7048 Not used
C163,C164 CCSQCH390J50
C451 (6800µF/42V) Not used ACH7080
C101-C110 CCSQCH470J50
C452 (10000µF/42V) ACH7049 Not used
C334 CEANP100M16
C452 (6800µF/42V) Not used ACH7081
C471 CEANP1R0M2A

(2) PARTS LIST FOR AWX7119 C172 CEANP1R0M50

C333 CEANP470M10
SEMICONDUCTORS C155,C156,C167,C168 CEAT100M50
IC454 (1A) AEK7009 C317-C320,C335,C336 CEAT100M50
IC453 BA178M06T C453-C458,C465,C466,C469 CEAT100M50
IC451 BA178M15T
IC452 NJM79M15FA C461,C462 CEAT101M2A
IC101 TC9163AN C467,C468 CEAT1R0M50
C470 CEAT3R3M50
IC301 UPC4570C C169,C170 CEAT470M25
IC151 UPC4570G2 C459,C460,C463,C464 CEAT470M50
Q311,Q312,Q329,Q330 2SA1162
Q337,Q338 2SA1162 C157,C158 CEAT471M6R3
Q313,Q314,Q321,Q322 2SA1255 C301,C302,C305,C306 CEBA100M50
C307,C308 CEBA221M25
Q452 2SA1837 C321-C324 CFTYA224J50
Q309,Q310,Q327,Q328 2SC2712 C173 CFTYA564J50
Q339,Q340 2SC2712
Q315,Q316,Q319,Q320 2SC3138 C330,C332 CKCYB331K2H
Q303,Q304 2SC3326 C165,C166 CKSQYB222K50
C111-C113,C171,C341 CKSQYF473Z50
Q451 2SC4793 C472 CKSQYF473Z50
Q341 2SC5174P C159,C160 CQMA243J50
Q101-Q104 2SK303
Q151 DTA124EK C161,C162 CQMBA823J50
Q152 DTC124EK
RESISTORS
Q153 DTC124ES R311,R312 RDR1/4VM152J
Q331,Q332,Q343 DTC143EK R301,R302 RDR1/4VM240J
Q333-Q336 DTC143ES R303,R304 RDR1/4VM561J
Q317,Q318 IMX1 R143 RS1/10S100J
Q323,Q324 IRF530 R133,R134,R171,R172 RS1/10S101J
Q325,Q326 IRF9530 R351-R354,R452 RS1/10S101J
D101-D104,D151,D301-D310 1SS355 R317,R318,R331,R332 RS1/10S122J
D401-D404 1SS355 R357-R360 RS1/10S151J
D451 D5SBA20 R377,R378,R453 RS1/10S153J
D452-D455,D459,D460 S5566G(TPB2) R465-R470 RS1/10S161J
D461 S5566G(TPB2) R361-R366 RS1/10S1R5J
D311,D312 UDZ15B R339-R346 RS1/10S221J
D457,D458 UDZ36B R454 RS1/10S273J
D456 UDZ4.7B R460 RS1/10S2R2J
D341 UDZS5.1B R355,R356 RS1/10S432J
D462 UDZS5.6B R459 RS1/10S470J
R464 RS1/10S4R7J
COILS R379,R380 RS1/10S682J
L151-L154 LCTA221J3225 R451 RS1LMF270J
R401,R402 RS1LMF331J
RELAYS R461-R463 RS1LMF390J
RY401-RY403 ASR7014 R403 RS1LMF821J
R373-R376 RS1LMFR22J
VR301,VR302 (2.2kΩ) VCP1123
Other Resistors RS1/10S J

23
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

Mark No. Description Part No. Mark No. Description Part No.
D608-D612,D614-D621 1SS355
OTHERS D607 SLP6118C51H
3P CABLE HOLDER 51063-0305 D601-D606 SLP9118C51H
SCREW ABA1007
SCREW ABA1052
CN101,CN102 8P PIN JACK AKB7023 SWITCHES
8P SPEAKER TERMINAL AKE1011 S602,S603 ASG1034
S601 ASX7008
HEAT SINK M ANH-813
HEAT SINK B ANH1021
CN202 FFC CONNECTOR 19P HLEM19S-1
CAPACITORS
CN203 16P PLUG KM200TA16 C602 CEAT102M6R3
JA401 REMOTE CONTROL JACK RKN1004 C604 CEJA2R2M50
C603,C611 CKSQYF103Z50
PCB BINDER VEF1040 C607,C608 CKSQYF104Z25
KN101,KN201,KN301,KN451 VNF1084 C605,C606,C610 CKSQYF473Z50
EARTH METAL FITTING
RESISTORS
VR601 (500kΩ) ACS7029
Other Resistors RS1/10S J
E FRONT L ASSY
OTHERS
SEMICONDUCTORS X601 CERAMIC RESONATOR VSS1014
IC751 UPC4570G2 (4.19MHz)
Q707,Q708 2SC1845 13P CABLE HOLDER 51063-1305
Q705 2SC2712 CN601 19P FFC CONNECTOR 9607S-19F
Q701-Q704 DTC124EK J602 JUMPER WIRE D15A13-125-2651
D704 1SS355

D701,D703,D705 SLP9118C51H

SWITCHES G OPT ASSY

S702-S704 ASG1034 OTHERS
3P CABLE HOLDER 51063-0305
CAPACITORS REMOTE RECEIVER UNIT GP1U27X
C753,C754,C761,C762 CCSQCH101J50
C767,C768 CCSQCH221J50
C751,C752,C755,C756 CEAL100M50
C763,C764 CEALR10M50
C759,C760 CEALR47M50

C757,C758 CFTYA153J50
C701 CKSQYF104Z25

RESISTORS
R751,R752 RS1/10S101J
VR751,VR752 (30kΩ) ACS7028
Other Resistors RS1/10S J

OTHERS
3P CABLE HOLDER 51063-0305
7P CABLE HOLDER 51063-0705
13P CABLE HOLDER 51063-1305
J603 JUMPER WIRE D15A03-100-2651
J3 JUMPER WIRE D15A07-200-2651

F FRONT R ASSY
SEMICONDUCTORS
IC601 PD5443A
Q609 2SA1162
Q610 2SC2712
Q611-Q613,Q615,Q616 DTA124EK
Q601-Q606,Q608,Q614 DTC124EK

24
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

6. ADJUSTMENT
6.1 IDLE CURRENT ADJUSTMENT
¶ CAUTION : Heatsinks’ (Q323–Q326) DC level is equal to +B or -B.
Don’t touch them or you will be electric shocked.

1. Connect the measuring instrument as shown in Fig.6-1. (R373 or R374)

2. Turn the POWER switch to ON.
3. Adjust VR301 (VR302) so that the voltage between both sides of R373 (R374) becomes 10mV ± 1mV.
4. Ages for 5 minutes.
5. Adjust VR301 (VR302) so that the voltage between both sides of R373 (R374) becomes 11mV ± 1mV.

DC Voltmeter DC Voltmeter

AF ASSY
SIDE A

Heat Sink
R373 R374

R375 R376

Heat Sink
VR301 VR302
Heat Sink

Heat Sink
CN202

Fig.6-1 Adjustment Method

25
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

7. GENERAL INFORMATION
7.1 IC
7 PD5443A (FRONT R ASSY : IC601) • The information shown in the list is basic information and
¶ REMOTE CONTROL AMP MICROCOMPUTER may not correspond exactly to that shown in the schematic
¶ Pin Assignment (Top view) diagrams.

P53 1 SR T2 42 P52
P17/SRDY 2 STB NC 41 P07
P16/CLK 3 CLK LOUD 40 P06
P15/SOUT 4 DATA M-CTRL 39 P05
P14/S N 5 CD-IND P-DET 38 P04
P13/T1 6 TU-IND P-CTRL 37 P03
P12/T0 7 PH-IND DIRECT 36 P02
P11 8 LI-IND NC 35 P01
P10 9 T1-IND WAKE UP 34 P00
P27/IN7 10 SPA-IND FUNC2 33 P43
P26/IN6 11 SPB-IND FUNC1 32 P42
P25/IN5 12 LOU-IND V-UP 31 P41
P24/IN4 13 NC V-DOWN 30 P40
P23/IN3 14 NC RSEL2 29 P33/CNTR1
P22/IN2 15 DIR-IND RSEL1 28 P32/CNTR0
P21/IN1 16 T2-IND NC 27 P31/INT1
P20/IN0 17 F-MUTE BACK UP 26 P30/INT0
VREF 18 VREF RST 25 RESET
XN 19 XIN SPA 24 P51/XCOUT
XOUT 20 XOUT SPB 23 P50/XCIN
VSS 21 VSS VCC 22 VCC

¶ Pin Function
No. Pin name I/O Function No. Pin name I/O Function
1 P53 I Remote control signal input pin. 24 P51/XCOUT I SPEAKER-A KEY input.
2 P17/SRDY O STB for TC9163N. 25 RESET I Reset pin.
3 P16/CLK O CLOCK for TC9163N. 26 P30/INT0 I BACK UP detection pin. interrupt specification.
4 P15/SOUT O DATA for TC9163N. 27 P31/INT1 I Not used.
5 P14/SIN O CD INDICATOR. 28 P32/CNTR0 I REC selector input 1.
6 P13/T1 O TUNER INDICATOR. 29 P33/CNTR1 I REC selector input 2. interrupt specification.
7 P12/T0 O PHONO INDICATOR. 30 P40 O Volume DOWN data output.
8 P11 O LINE INDICATOR. 31 P41 O Volume UP data output.
9 P10 O TAPE1 INDICATOR. 32 P42 I FUNCTION selector input 1.
10 P27/IN7 O SPEAKER-A INDICATOR. 33 P43 I FUNCTION selector input 2.
11 P26/IN6 O SPEAKER-B INDICATOR. WAKE UP input.
34 P00 I
12 P25/IN5 O LOUDNESS INDICATOR. Key on wake up specification.
13 P24/IN4 O Not used. 35 P01 O Not used.
14 P23/IN3 O Not used. DIRECT KEY input.
36 P02 I
15 P22/IN2 O DIRECT INDICATOR. Key on wake up specification.
16 P21/IN1 O TAPE2 INDICATOR. 37 P03 O Protection control pin.
17 P20/IN0 O FUNCTION switch MUTE. 38 P04 I Output error detection pin
18 VREF I Pulls up to 5V. 39 P05 O MUTING control pin.
19 XIN I 4.19MHz . LOUDNESS KEY input.
40 P06 I
20 XOUT O Ceramic vibrating and connecting terminal. Key on wake up specification.
21 VSS - Digatal GND. 41 P07 O Not used.
22 VCC - Power supply +5V. 42 P52 I TAPE2 KEY input.
23 P50/XCIN I SPEAKER-B KEY input.

26
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

7.2 DISASSEMBLY

1 3
1 ×2 1 1 ×2
1
10

1
2

Front Panel
5

13
5 Diagnose the
AF Assy.
∗ : Be careful not to injure
3 4 ×2 the Front Panel.
5 ×5
11

2
Rear Panel

Chassis
6 6 6

8 Unhook lead wires.

Rear Panel

7
For
Service

7 Chassis
×3 12 Screw for Rear Panel

PCB Support 7 ×2
9
×3
Cutting Pliers

27
Downloaded from www.Manualslib.com manuals search engine
 28
RIAA
D IC151
2 8mV ON/OFF
/50kΩ PHONO
Q501 DIRECT DIRECT ENERGY MOS
37dB A Q503 ON/OFF
POWER AMP
TUNER FUNCTION WRLC
A 39dB
LOUDNESS Q505 PROTECTION RY D
CD RY401 401
200mV SP-A
/50kΩ
A-307R, A-207R

D A A D RY402
LINE IC101 SP-B
Q507 Q509 RY403
A D H.P
TAPE1 M VR501 TONE
Q303
7.3 BLOCK DIAGRAM

/MD VOLUME AND B

BALANCE UNUSUAL JA501
200mV
/1kΩ REC D OUTPUT

Downloaded from www.Manualslib.com manuals search engine

IC751 FUNC DETECTION
Q337-Q340 E VR751 MUTE
200mV TAPE2 UP/DOWN VR752
/50kΩ MONITOR VR601
F
200mV
/1kΩ REC
CN101
D CN102

FROM UNUSUAL +BL

TO FUNCTION SW
OUTPUT DETECTION D
TO POWER STAGE
–BL D451

TO µ-COM +6
KEY INPUTS DIRECT, LOUDNESS ON/OFF LED
D IC453
VOLUME UP/DOWN +19
µ-COM TO OP AMP IC451
RY –15
FROM FUNCTION SEL
F FUNC MUTE ON/OFF IC452
IC601 C C
D T1 S801 FU1
+BH
TO VOLTAGE STAGE REGULATOR
–BH
SR INPUT TO PROTECTION RY D454
D D455
 A-307R, A-207R

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES
REAR PANEL

SPEAKERS

R
B L

A T TA M A 2M
AC INLE
A A

L L T

R R
T T R A L

1 GND (Turntable ground) terminal - SPEAKERS B terminals (Left channel)

2 PHONO terminals = SPEAKERS A terminals (Right channel)

3 TUNER terminals ~ SPEAKERS A terminals (Left channel)

4 CD terminals ! CONTROL OUT jack

This jack is for output of control signals when operating other
5 LINE terminals components bearing the Î mark with the attached remote
control unit.
6 TAPE 1/MD REC (OUT) terminals
@ AC INLET jack
Connect power cord to here and an AC wall socket, or the AC
7 TAPE 1/MD PLAY (IN) terminals outlet of an audio timer.
If you are going to be away from home for a long period of time,
8 TAPE 2 MONITOR REC (OUT) terminals disconnect the unit from the wall socket.

9 TAPE 2 MONITOR PLAY (IN) terminals NOTES:

If you use an other power cord than provided, we cannot
assume the liabilities in what may occur as a result of it.
0 SPEAKERS B terminals (Right channel) (The provided power cord has a current capacity of 2.5 A.)

29
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

FRONT PANEL

VOLUME
S EREO AMPL FIER
POWER
CD UNER PHONO L NE APE 1 APE 2
MD MONI OR

A SPEAKERS B BASS REBLE BALANCE INPU SELEC OR

PHONES LOUDNESS DIREC APE 2

MONI OR

– + – + MIN MAX L R

The illustration shows the A-307R.

1 POWER (— OFF/_ ON) switch 5 TAPE 2 MONITOR button/indicator

Press to turn power to the unit ON and OFF. Use when there is an adaptor component (graphic equalizer,
This unit cannot be turned ON and OFF using the remote etc.) or cassette deck connected to the TAPE 2 MONITOR
control unit. terminals.
On : Indicator lights when using the adaptor component or
2 REMOTE CONTROL SENSOR window listening to the cassette deck.
Off : Indicator goes off when not in use.
3 VOLUME control
Use to adjust the volume level.
NOTES:
÷ When no connections are made to the TAPE 2 MONITOR
terminals, or when they are not in use, be sure to set this
4 INPUT SELECTOR knob/indicators switch to the off position. (No sound will be heard if it is set
Turn the knob clockwise or counterclockwise so that the to the on position.)
indicator lights for your desired input source. Turning the knob ÷ When the TAPE 2 MONITOR indicator is on and the INPUT
clockwise causes the lit indicator to right. Turning counter- SELECTOR knob is not set to TAPE 1/MD, the signals
clockwise causes it to left. which are input through TAPE 2 MONITOR are then output
CD : For compact disc playback with a CD player. at TAPE 1/MD REC OUT.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
LINE : Set to this position when listening to the
6 BALANCE control
program from a component connected to the Should normally be left in the center position. Adjust balance
LINE terminals. if the sound is louder from one of the speakers. If the right side
TAPE 1/MD : For playback with a cassette deck or MD is louder, turn toward the L (left) position and if the left side is
recorder connected to TAPE 1/MD terminals. louder, turn toward the R (right) position.

NOTE:
This control does not operate when the DIRECT button is in the
on position.

30
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

7 DIRECT button/indicator 0 BASS tone control

Use this button when you do not wish to pass the output from Use to adjust the low-frequency tone. The center position is the
input terminal equipment through the various frequency flat (normal) position. When turned to the right, low-frequency
adjusting circuits (BASS, TREBLE, BALANCE, LOUDNESS). tones are emphasized; when turned to the left, low-frequency
On : The indicator lights: The signals passing through the tones are de-emphasized.
input terminals are reproduced without passing through
the various frequency adjusting circuits. This results in NOTE:
flat, pure sound which is a more faithful reproduction of This control does not operate when the DIRECT button is in the
the input source. on position.
Off : The indicator goes off: The signal passes through the
various frequency adjusting circuits. - SPEAKERS B (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to
8 LOUDNESS button/indicator SPEAKERS B terminals.
Use when listening at low volume levels. ON : The indicator lights. Sound is heard from the speaker
On : The indicator lights: Boosts low and high frequencies to system.
give added punch to playback even at a low volume OFF : The indicator goes off. No sound is heard from the
level. speaker system. Set to this position when listening with
Off : The indicator goes off: Should normally be left in this headphones.
position.
= PHONES jack
NOTE: When using headphones, insert the plug into this jack.
This button does not operate when the DIRECT button is in the
on position. NOTE:
The speakers continue to output sound even when headphones
9 TREBLE tone control are plugged into this jack.
Use to adjust the high-frequency tone. The center position is To mute the sound from the speakers, press the SPEAKERS
the flat (normal) position. When turned to the right, high- button to OFF.
frequency tones are emphasized; when turned to the left, high-
frequency tones are de-emphasized. ~ SPEAKERS A (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to
NOTE: SPEAKERS A terminals.
This control does not operate when the DIRECT button is in the ON : The indicator lights. Sound is heard from the speaker
on position. system.
OFF : The indicator goes off. No sound is heard from the
speaker system. Set to this position when listening with
headphones.

31
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

REMOTE CONTROL

T TA

TA
T

APE
K K ΙΙ

CD

T TAT +
TUNER

T +

V M
TA TA 2

T AM
M T T T

1 CD POWER button 7 TUNER POWER button

Switches CD player power STANDBY/ON. Switches TUNER power STANDBY/ON.

2 TAPE SELECT button 8 TAPE POWER button

Selects the cassette No. (1 to 6) for multi-cassette changer. Switches the cassette deck power STANDBY/ON.
(Can not turn ON/OFF some cassette decks.)
3 DECK II button
To operate Deck II, press this button before pressing the 9 TAPE operation buttons
operating buttons. Also, when using a single deck, press this 2, 3 : Playback in the direction of the arrows.
button before pressing the operating buttons. 7 : Stop
1, ¡ : Tape fast forward/reverse.
4 DECK I button
To operate Deck I, press this button before pressing the 0 CD player operation buttons
operating buttons. 4 : Returns you to the start of the current track.
(Track search)
5 DISC SELECT button ¢ : Takes you to the start of the next track.
Press this to select discs on a multi or twin tray compact disc (Track search)
player. 7 : Stop
3 : Play
6 Input selector button
Use to select the playback source. - STATION + (up), – (down) buttons
CD : For compact disc playback with a CD player. Calls each station number in sequence.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable. = VOLUME + (up), – (down) buttons
TAPE 1 : For playback with a cassette deck or MD deck + ........................................................ Increases the volume.
recorder connected to TAPE 1/MD terminals. – ...................................................... Decreases the volume.
TAPE 2 : For playback with a cassette deck or adaptor
connected to TAPE 2 MONITOR terminals. NOTE:
LINE : For playback with a component connected to the When the accessory remote control unit is used to operate
LINE terminal. other Pioneer components with the Î mark, it cannot be used
to operate functions which do not correspond to the functions
listed on the remote control unit.

32
Downloaded from www.Manualslib.com manuals search engine
 A-307R, A-207R

8.2 SPECIFICATIONS
Amplifier Section Power Supply/Miscellaneous
Continuous power output Power requirements ................... AC 220 – 230 V, 50/60 Hz
(both channels driven at 20 Hz to 20 kHz)∗∗ Power consumption
[A-307R] [A-307R] ................................................................ 140 W
T.H.D. 0.1 %, 8 Ω ..................................... 45 W + 45 W∗ [A-207R] ................................................................ 130 W
T.H.D. 0.15 %, 4 Ω ................................... 65 W + 65 W∗ Dimensions (including knobs and other protruding parts)
[A-207R] ...................................... 420 (W) x 114 (H) x 307 (D) mm
T.H.D. 0.1 %, 8 Ω ..................................... 35 W + 35 W∗ Weight (without package)
T.H.D. 0.15 %, 4 Ω ................................... 45 W + 45 W∗ [A-307R] ................................................................. 5.9 kg
DIN Continuous power output [A-207R] ................................................................. 4.7 kg
(both channels driven at 1 kHz)
[A-307R] Accessories
T.H.D. 1.0 %, 8 Ω ...................................... 55 W + 55 W
Remote control unit ............................................................. 1
T.H.D. 1.0 %, 4 Ω ...................................... 80 W + 80 W
Batteries (AA/R6P) .............................................................. 2
[A-207R]
Power cord (Rated current 2.5 A) ....................................... 1
T.H.D. 1.0 %, 8 Ω ...................................... 45 W + 45 W
Operating instructions ......................................................... 1
T.H.D. 1.0 %, 4 Ω ...................................... 60 W + 60 W
Warranty card ..................................................................... 1
Total harmonic distortion∗∗
[A-307R]
NOTE:
20 Hz to 20 kHz, 22.5 W, 8 Ω ............................ 0.08 %∗
Specifications and design are subject to possible modifica-
[A-207R]
tions without notice, due to improvements.
20 Hz to 20 kHz, 17.5 W, 8 Ω ............................ 0.08 %∗
÷ Power output specification is for when power supply is
∗ Measured with DIRECT button set to on.
230V.
∗∗ Measured by Audio Spectrum Analyzer.
Input sensitivity/impedance
PHONO (MM) ........................................... 2.8 mV/50 kΩ
CD, TUNER, LINE, TAPE 1/MD, TAPE 2 MONITOR
.................................................................. 200 mV/50 kΩ
PHONO (MM) overload level
1 kHz, T.H.D. 0.1 % ............................................ 150 mV
Output level/impedance
TAPE 1 REC, TAPE 2 MONITOR REC ..... 200 mV/1 kΩ
Frequency response
PHONO (MM) ......................... 20 Hz to 20 kHz, ±0.5 dB
CD, TUNER, LINE, TAPE 1/MD, TAPE 2 MONITOR
.................................................... 5 Hz to 100 kHz, +0 –3
dB∗
Tone control
BASS ....................................................... ±8 dB (100 Hz)
TREBLE ................................................... ±8 dB (10 kHz)
Loudness contour (volume control set at –30 dB position)
........................................ +6 dB (100 Hz)/+4 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input) ................................... 85 dB∗
CD, TUNER, LINE, TAPE 1/MD, TAPE 2 MONITOR
............................................................................ 106 dB∗
Signal-to-Noise ratio (DIN, continuous power/50 mW)
PHONO (MM) ............................................. 71 dB/67 dB∗
CD, TUNER, LINE, TAPE 1/MD, TAPE 2 MONITOR
................................................................... 91 dB/71 dB∗

33
Downloaded from www.Manualslib.com manuals search engine