Parametric Design of Dies For Cutting and Drawing Using Catia Environment
Parametric Design of Dies For Cutting and Drawing Using Catia Environment
Parametric Design of Dies For Cutting and Drawing Using Catia Environment
2 - 2017
Series I: Engineering Sciences
1. Introduction
In the last few decades the trends on the products' market are continuously changing.
The customers’ requests are at high levels, thus due to the worldwide competition on
market, the companies have to design and manufacture new products in short time at high
quality and low costs. In the context of product life cycle, the product development phase
plays an essential role. In this phase a time consuming operation is the design stage which
supposes more or less time according to the products complexity and the level of
CAD/CAE/CAPP/CAM integration.
Nowadays the Computer Aided Design (CAD) tools are worldwide used. Computer
Aided Design is defined to be the activity of using a computer system for designing,
analysing and optimising of the products according to the principles of design of
manufacturability [7]. The first developed CAD software was for 2D drawings and
sketches (1960 appears SKETCHPAD - first 2D drawing software), and later it was
developed software at 3D modelling level. In 1969, Syntha Vision was launched, the first
CAD commercial software which had a solid modeller [1]. In the next years are released
new 3D CAD software systems like AutoCAD, Unigraphics, Catia, and so on [1]. In 1989
was introduced by Parametric Pro (T-Flex) and later by Pro/Engineer, the concepts of
parametric design, which means that the 3D models are defined by parameters [1]. A
change of dimension value in one place also changes other dimensions to keep relations
between all elements in the design. The parametric design is an important tool that helps
1
Dept. of Manufacturing Engineering, Transilvania University of Brașov.
86 Bulletin of the Transilvania University of Braşov • Vol. 10 (59), No. 2 - 2017 • Series I
manufacturers to reduce the time of development phase (design phase) especially when
it’s about parts families and their associated manufacturing sequences and necessary tools
used for production. The designed products have been often changing, and for every
changed design stage, the redesign time has to be taken into consideration. Parametric
modelling represents change [9] and using it the time for redesigning will be substantially
reduced. Nowadays, a lot of CAD/CAM software systems like: CATIA, SolidWorks,
Pro/ENGINEER, Siemens NX, Delcam Power Shape, Autodesk Inventor allows
parametric modelling and they sustain the companies to be competitive on the market.
Zheng-hao et al. used a parametric modelling method in Pro/Engineer for a Globoidal
Indexing Cam [11], Du Yao et al. used SolidWorks and KBE for a parametric design and
calculation of metal profiles [10], Ghionea used Catia for a parametric design of the
modular devices element [4], and there are many others applications for parametric
modelling in the literature. In different CAD environments the parametrical drawings can
be obtained using programming languages like C++, Visual Basic, AutoLISP/
VisualLISP, OjectARX etc. For example in the literature it was identified in
AutoCAD/VisualLISP software tools used to simulate the metal spinning process by
multi-pass path [3] and to design cold stamping [2] or in combination with OpenDCL to
design the manufacturing technologies for air-cooled single-cylinder engine block [6].
Catia (Computer Aided Tree dimensional Interactive Applications) is a Dassault Systemes
product, being one of the most used integrated systems CAD/CAM/CAE worldwide, with
applications in automotive, aircraft industry, machine and equipment manufacturing industry
etc. [5]. It contains many workbenches for various engineering domains and it provides a
variety of solutions including a high level of parameterization of the 3D models, being
possible utilization of external data bases or files for parameters management.
The research aims to design in a parametric mode a die used for manufacturing of a
rotational part with various dimensions and configurations. The parametric die will be
designed in Catia environment using external files to define the parameters for part geometry.
It was chosen the representative cylindrical flanged part manufactured from DC04 sheet
drawing steel. The part parameters as can be seen in Figure 1 are: sheet thickness, inner
diameter, flange diameter, part height, punch radius and plate radius.
To manufacture this part, are needed several basic cold forming processes as follows:
- trimming / cutting the blank from the entire metal sheet;
- one or more drawing operations;
- a calibration process;
- trimming extra material to get the flange diameter dimension.
It was chosen the design of a parametrical compound tool for the first operations:
trimming the sheet metal blank and the first drawing operation. Thus, this tool can be
used for the parts which are manufactured with one single drawing operation, or for the
parts which need more than one operation for the first drawing operation.
The idea of the used method is to design a parametric 3D die for a basic part, in this
case a cylindrical flanged part (see Figure 1), according to the part dimensions. When the
part dimensions are changed, the die dimensions will be automatically updated in a short
time. If in a normal way, the design of a new die can take more than one week, using this
application the die design will be done in less than one hour. This method can be very
useful for parts families, when it is needed to keep the geometry, changing the part
dimensions and also for necessary tools for its manufacturing.
Figure 2 illustrates the block scheme for the parametric design of the compound tool for
trimming the blank and drawing operation, according to part dimensions and tool
standardised components configurations. It can be seen which are the input data and
which are the final outputs data.
Below is presented the design method, step by step, starting from input files up to final
output tool assembly as 3D model.
The tool assembly is composed from many different components, usual with some
standardised dimensions [8] and with some customized dimensions according to the blank
and part gauge. For each standardized component was developed one excel file
containing many component configurations (Figure 4). A row corresponds to a
configuration, namely a dimensional variant. In Figure 4 it can be seen an example of a
tool component (guide bush for tool column), with four rows, thus four component
configuration. According to the representative part dimensions, automatically will be
chosen the right configuration.
Step 2 - Parameters import from Excel to Catia environment using “design table”
function.
First, the parameters that have been defined in Excel files were created also in Catia
using “formula” function available in Part Design workbench. Second, using “design
table” function available in Knowledge Advisor workbench [12], to Catia parameters will
be associate a parameter value from Excel files. For the part and each tool component,
was implemented their own “design table” association. In Figure 5 is presented an
example of a design table association between six part parameters defined in Excel file
and Catia parameters. When the parameters will be modified in Excel files, they will be
automatically updated in Catia environment.
example, for blank diameter Db ≤ 60 mm, will be used the first pawl configuration, thus
the first row from its Excel file, which contain pawl standardised dimensions.
As above was mentioned, for a cylindrical flanged part, was chosen to design a
parametric tool for sheet metal blank trimming and for the first drawing operation. The
tool components were modelled according to the part dimensions which are the input of
the parametric model. They are introduced in an Excel file and associated to Catia
environment. If a new tool for a new part dimensions have to be developed, should be
follow next steps:
- open the Excel file with part parameters and the parametric model in Catia;
- input the new parameters in Excel file and save the modification;
- switch to Catia environment and wait until the modifications are noticed; a dialog
window appears to inform that something was modified in Excel parameters and ask to
synchronize them with Catia parameters; for synchronize, “Yes” button has to be
pressed (Figure 7);
- update the parametric model; when the parameters are synchronised, all tool
components will be in red, asking for update. Thus press the “update” button;
- final step is to update the final outputs, the tool lower and upper subassemblies.
Nasulea, D., et al.: Parametric Design of Dies for Cutting and Drawing using Catia… 91
To keep the links between the parametric model (input) and the final subassemblies
outputs, it was integrated in a working structure (Figure 8). This structure was named
“input-output structure” and it is a CATProduct specific Catia file. It allows to copy with
link the tool components from the parametric tool to their own part in each subassembly.
Figure 8 shows the input-output working structure and the final tool assembly.
4. Conclusion
References