Scribd
Upload
68 views3 pages

Project Synopsis: Submitted in The Partial Fulfilment of The Requirements For The Degree of

This document provides a project synopsis for a door security system that uses a microcontroller, electrical door lock, motion sensor, numerical keypad, Bluetooth module, and buzzer. The aim is to allow door access by entering a password on the keypad without needing physical keys. It will also detect if the door is forced open via the motion sensor and alert the user. The system block diagram shows the components and data flow between the microcontroller, keypad, Bluetooth module, buzzer, and door lock. Potential applications include automating door locks in buildings using a password instead of physical keys.

Uploaded by

Sahil Sethi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
68 views3 pages

Project Synopsis: Submitted in The Partial Fulfilment of The Requirements For The Degree of

This document provides a project synopsis for a door security system that uses a microcontroller, electrical door lock, motion sensor, numerical keypad, Bluetooth module, and buzzer. The aim is to allow door access by entering a password on the keypad without needing physical keys. It will also detect if the door is forced open via the motion sensor and alert the user. The system block diagram shows the components and data flow between the microcontroller, keypad, Bluetooth module, buzzer, and door lock. Potential applications include automating door locks in buildings using a password instead of physical keys.

Uploaded by

Sahil Sethi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Project Synopsis

on

Door security system

Submitted in the partial fulfilment of the requirements for the degree


Of
Bachelor of Technology
In

Electrical and Electronic Engineering

HMR INSTITUTE OF TECHNOLOGY AND MANAGEMENT


Hamidpur, New Delhi.

Submitted to – Submitted by –

Mr. Nitin Kumar Gupta Sahil Sethi


Assistant Professor Gaurav Sharma
Department of Electrical Nitish Kumar
Himanshu Singh
Aim
The aim of the project is to make Door security system

Hardware used
Microcontroller AVR atmega8, electrical door lock, motion sensor, numerical keypad, Bluetooth
module, buzzer.

Software used
ATMEL Studio

Project Description
Sometimes, we forgot to carry the key of our home. Or sometimes when we came back to home and
no one is at home. In these cases it becomes very difficult to get inside the house. This project is
designed to solve this purpose. Main concept behind this project is of a door-latch opening using a
numerical password entered through keypad. As well as alarming the Buzzer when password is
entered wrong for multiple times.

Block Diagram
Block Diagram Description
It mainly consist of the following blocks:-

1. Microcontroller: This is the CPU (central processing unit) of our project. We are going to
use a microcontroller AVR Atmege8. The various functions of microcontroller are like:

I. Reading the digital input from Keypad


II. Sensing the password using keypad and to check whether it is a correct
password or a wrong password and rotate the stepper motor if the
password entered is a correct password.
III. Sending the data to the computer using serial port. This data consist of the
status of entered password (Correct/wrong).

2. Motion sensor : If the gate is forcefully open. It will detect the pressure and then send the
signal to mobile device and also alarm buzzer.

3. Bluetooth Module: It will help in communication between device and microcontroller.

4. Buzzer: We are going to use a buzzer to indicate the wrong password to open the door.

5. Keypad: User will enter the password using the keypad. Various keys of keypad are as
following,

I. 0 to 9 II. Enter III. Escape

Application and Advantage

1. Can be used in various rooms like seminar hall, conference room, and study rooms in college.

2. The project (password detector) can be used to automate the door locking process, so the user
need not to carry the door lock keys along with him, he can just remember the password and use it
later to open the door

You might also like