Scribd
Upload
59 views2 pages

Terminology in Geomechanics

The document defines key terminology used in geo-mechanics: - Traction vectors describe forces per unit area on a surface, including normal and shear components. - Tensors describe linear relationships between vectors, scalars, and other tensors and can be represented as multi-dimensional arrays. They are used to relate sets of geometric vectors like stress tensors relating stress and direction. - The stress state at a point can be represented by a stress tensor, which organizes the nine stress components into a 3x3 matrix according to static equilibrium conditions.

Uploaded by

Amit Kumar Das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views2 pages

Terminology in Geomechanics

The document defines key terminology used in geo-mechanics: - Traction vectors describe forces per unit area on a surface, including normal and shear components. - Tensors describe linear relationships between vectors, scalars, and other tensors and can be represented as multi-dimensional arrays. They are used to relate sets of geometric vectors like stress tensors relating stress and direction. - The stress state at a point can be represented by a stress tensor, which organizes the nine stress components into a 3x3 matrix according to static equilibrium conditions.

Uploaded by

Amit Kumar Das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Terminology in Geo-mechanics

Traction Vector:
Traction vector, in mechanics, is the force per unit area on a surface, including normal and shear
components.

Tensor:
Tensors are geometric objects that describe linear relations between vectors, scalars, and other
tensors. Elementary examples include the dot product, the cross product, and linear maps. Vectors
and scalars themselves are also tensors. A tensor can be represented as a multi-dimensional array of
numerical values. The order (also degree or rank) of a tensor is the dimensionality of the array
needed to represent it, or equivalently, the number of indices needed to label a component of that
array. For example, a linear map can be represented by a matrix, a 2-dimensional array, and
therefore is a 2nd-order tensor. A vector can be represented as a 1-dimensional array and is a 1st-
order tensor. Scalars are single numbers and are thus zeroth-order tensors.
Tensors are used to represent correspondences between sets of geometrical vectors. For example,
the stress tensor T takes a direction v as input and produces the stress T(v) on the surface normal to
this vector as output and so expresses a relationship between these two vectors. Because they
express a relationship between vectors, tensors themselves must be independent of a particular
choice of coordinate system. Taking a coordinate basis or frame of reference and applying the tensor
to it results in an organized multidimensional array representing the tensor in that basis, or as it
looks from that frame of reference. The coordinate-independence of a tensor then takes the form of
a "covariant" transformation law that relates the array computed in one coordinate system to that
computed in another one. This transformation law is considered to be built in to the notion of a
tensor in a geometrical or physical setting, and the precise form of the transformation law
determines the type (or valence) of the tensor.
For example, the stress state at point P can be represented by an infinitesimal cube with three stress
components on each of its six sides (one direct and two shear components).
Since each point in the body is under static equilibrium (no net force in the absence of any body
forces), only nine stress components from three planes are needed to describe the stress state at a
point P.
These nine components can be organized into the matrix:

where shear stresses across the diagonal are identical (i.e. s xy =


s yx , s yz = s zy , and s zx = s xz ) as a result of static equilibrium (no
net moment). This grouping of the nine stress components is
known as the stress tensor (or stress matrix).
Homogeneous and Isotropic:
A material is isotropic when its mechanical properties remain the same in all directions at a given
point while they may change from point to point; a material is homogeneous when its mechanical
properties may be different along different directions at given point, but this variation is consistent
from point to point. For example, consider three common items on a dining table: stainless steel
forks, bamboo chopsticks, and Swiss cheese. Stainless steel is isotropic and homogeneous. Bamboo
chopsticks are homogeneous but not isotropic (they are transversely isotropic, strong along the fibre
direction, relatively weak but equal in other directions). Swiss cheese is isotropic but not
homogeneous (The air bubbles formed during production left inhomogeneous spots).

Order of Tensor:
The stress state is a second order tensor since it is a quantity associated with two directions. As a
result, stress components have 2 subscripts. A surface traction is a first order tensor (i.e. vector)
since it a quantity associated with only one direction. Vector components therefore require only 1
subscript. Mass would be an example of a zero-order tensor (i.e. scalars), which have no
relationships with directions (and no subscripts).

Both stress and strain fields are second order tensors. Each component consists of information in
two directions: the normal direction of the plane in question and the direction of traction or
deformation. There are nine (9) components in each field in a three dimensional space. Since they
are symmetric, engineers usually rewrite them from a 3×3 matrix to a vector with six (6) components
and arrange the stress-strain relations into a 6×6 matrix to form the generalized Hooke's law. For the
36 components in the stiffness or compliance matrix, not every component is independent to each
other and some of them might be zero. This information is summarized in the following table.

Independent Nonzero Nonzero Nonzero


Constants On-axis Off-axis General
Triclinic
21 36 36 36
(General Anisotropic)
Monoclinic 13 20 36 36
Orthotropic 9 12 20 36
Transversely
5 12 20 36
Isotropic
Isotropic 2 12 12 12

You might also like