Scribd Logo
Upload

Welcome to Scribd!

  • 196 views

    Pga Grout

    Uploaded by

    Dileepa Dissanayake
    PGA is a powder concentrate grouting agent that complies with industry standards. It contains superplasticizers, expansion agents, corrosion inhibitors and other additives. PGA is used for duct grouting in bridges, buildings, and other structures. It provides high fluidity, water retention, strength, and anti-corrosion properties to grout. PGA grout exhibits high early and later-stage compressive strength, with no bleeding or corrosion effects. The technical data sheet provides instructions for mixing and using PGA grout at the appropriate temperatures and pressures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pga Grout

    Uploaded by

    Dileepa Dissanayake
    196 views2 pages
    PGA is a powder concentrate grouting agent that complies with industry standards. It contains superplasticizers, expansion agents, corrosion inhibitors and other additives. PGA is used for duct grouting in bridges, buildings, and other structures. It provides high fluidity, water retention, strength, and anti-corrosion properties to grout. PGA grout exhibits high early and later-stage compressive strength, with no bleeding or corrosion effects. The technical data sheet provides instructions for mixing and using PGA grout at the appropriate temperatures and pressures.

    Original Description:

    PGA GROUT

    Original Title

    PGA GROUT

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    PGA is a powder concentrate grouting agent that complies with industry standards. It contains superplasticizers, expansion agents, corrosion inhibitors and other additives. PGA is used for duct grouting in bridges, buildings, and other structures. It provides high fluidity, water retention, strength, and anti-corrosion properties to grout. PGA grout exhibits high early and later-stage compressive strength, with no bleeding or corrosion effects. The technical data sheet provides instructions for mixing and using PGA grout at the appropriate temperatures and pressures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    196 views2 pages

    Pga Grout

    Uploaded by

    Dileepa Dissanayake
    PGA is a powder concentrate grouting agent that complies with industry standards. It contains superplasticizers, expansion agents, corrosion inhibitors and other additives. PGA is used for duct grouting in bridges, buildings, and other structures. It provides high fluidity, water retention, strength, and anti-corrosion properties to grout. PGA grout exhibits high early and later-stage compressive strength, with no bleeding or corrosion effects. The technical data sheet provides instructions for mixing and using PGA grout at the appropriate temperatures and pressures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Technical Data Sheet

    GROUT AGENT PGA


    Pressure grouting agent
    Complies with BS 445, BS 446 and BS 447
    1.0 Description
    PGA is a powder concentrate without chloride, composed of superplasticizer, new efficient
    expansion agent, corrosion inhibitors, deformers, stabilizers and mineral fibers.

    2.0 Uses
    PGA is an admixture adding to grout for filling in post-tensioning pre-stressed bridge pipeline
     Duct grouting for all kind of railway, highway and post tensioning pre-stressed bridge.
     Duct grouting for bridges, nuclear power plants and other pre-stressed structures.
     Anti-leaking grouting for joint of various concrete structures.
     Curtain grouting, anchor grouting or filling or repairing of cracks.

    3.0 Advantages
     High fluidity and good water retention property.
     No bleeding and high filling.
     Micro-expansion property and high strength.
     High adhesion and anti-rust.

    4.0 Properties
    Grout added by PGA shows following properties:
    Properies
    Item
    Criterion Results
    7d ≥ 30 50.2
    Compressive strenght - M Pa
    28d ≥ 30 72.3
    Steel corrision effect No. No.
    Water bonding material ratio - % 0.26 ~ 0.40 0.34
    Initial 10 ~ 25 21
    Fluidity - s
    3h 10 ~ 25 23
    3h 0 0
    Bleeding rate - %
    24 h 0 0
    3h 0~5 0.3
    Free expansion rate - %
    24 h 0~5 0.4
    Filling degree Qualified Qualified
    Note: PO42.5 is used for the test and grouting agent counts 10% of cement.

    CASTECH BANGLADESH (PVT) LTD. NAYABARI, KANCHPUR, SONARGAON, NARAYANGONJ- 1430 TP: +8801883447908
    5.0 Instructions for use
     Ratio of water to material is 0.26 ~ 0.40, and it can be slightly adjusted according to different
    parts of grouting.
     First add 80% ~ 90% of the actual mix of water into blender. Then starting blender, equally add
    all grouting agent with all time stirring. After use rapid stirring for 3 min; add remaining 10% ~
    20% of water, stirring is continued for 2 min.
     Grouting time from stirring to duct depends on the temperature, usually 30 min. to 1 hr.
     Continual stirring is recommended before and during grouting to maintain uniformity and fluidity.
     Grouting should be used with piston pressure or vacuum pumps and pressure must be greater
    than 0.7 MPa.
     Grouting temperature should be maintained between 5º C ~ 25º C, otherwise measures should
    be taken to meet the conditions.

    6.0 Packaging
    PGA is available in the paper plastic compound bag packing, with a bag 25 kg or 50 kg.

    7.0 Storage
    It has a shelf life of 6 month if kept in a dry and cool environment in its original packing. Avoid direct
    sunlight, and pay attention to anti moisture and damaged packaging. And it should be placed on the
    pallet off the ground in a dry and ventilated room.

    8.0 Precautions
    Stirrer speed should be not less than 1000 rpm. It is not allowed to add additional water to enhance
    fluidity due to construction delay. Under the condition of hot climate, the construction process should
    be chosen at low temperature of the day, such as at night. Under the condition of cold weather the
    construction should be carried out according to winter construction standard.

    9.0 Health & Safety


    As with all chemical products, caution should be always be exercised. Protective clothing such as
    gloves and goggles should be worn. See packaging/MSDS for instructions.
    Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be
    accidentally swallowed, do not induce vomiting, but call for medical assistance immediately.

    10.0 Technical support


    CasTech offers full technical support package to specifiers, contractors and end users, as well as
    technical assistance on site and after sales constructions.
    CasTech provides detailed method statements on all its products for use in various applications.
    These must be referred prior to starting the work. The information above is summery intended for
    guidance only.
    The information contained herein is to the best of our knowledge, belief and accuracy. However, hence the conditions of handling
    and usage are beyond our control. We make no warrantee of results and assume no responsibility or liability for any damages or
    consequential damage incurred by the use of the product. Our products are sold on the condition that the user shall evaluate them
    as well as our recommendations. To determine their suitability for a particular purpose the user is solely responsible for the selection
    of CasTech products.

    CASTECH BANGLADESH (PVT) LTD. NAYABARI, KANCHPUR, SONARGAON, NARAYANGONJ- 1430 TP: +8801883447908

    You might also like