0% found this document useful (0 votes)
62 views2 pages

Gland

This document provides information on flameproof and increased safety cable glands for hazardous locations. It includes a table with specifications for different gland sizes, listing dimensions for thread sizes, cable inner and outer diameters, and armor orientations. It also provides details on approvals for ATEX, IECEx, and cCSAus compliance in explosive gas and dust environments. Installation and usage instructions are noted.

Uploaded by

htc one x9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
62 views2 pages

Gland

This document provides information on flameproof and increased safety cable glands for hazardous locations. It includes a table with specifications for different gland sizes, listing dimensions for thread sizes, cable inner and outer diameters, and armor orientations. It also provides details on approvals for ATEX, IECEx, and cCSAus compliance in explosive gas and dust environments. Installation and usage instructions are noted.

Uploaded by

htc one x9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

501/453/RAC Group II Cable Glands

FFlameproof, Increased Safety, Dust Protection


'T' 'G'
Class - Zones - Divisions
'C' Certified ATEX / IECEx / c CSA us

Application
A

ø 'B'
'F'
'A'

 Outdoor or indoor use.


 For use with single wire armour ‘W’, wire braid ‘X’, steel
tape armour ‘Z’, elastomer and plastic insulated cables.
 See technical section for installation rules and regulations.

CABLE GLAND SELECTION TABLE


Hexagon
Entry Thread Size 'F' Cable Acceptance Details
Dimensions
Size Inner Sheath ‘A’ Armour / Braid 'C'
“NPT * Outer Sheath 'B' ‘G’
Ref. Across Across
Metric Standard or Standard Seal Alternative Seal (S) Orientation Orientation Flats Corners
Option” Min. Max. Min. Max. Min. Max. 1 2
Os M20² ½" 3.2 8.0 - - 5.5 12.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
O M20² ½" 6.5 11.9 - - 9.5 16.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
A M20 ¾" or ½" 10.0 14.3 9.0 13.4 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 13.0 20.2 9.5 15.4 16.9 26.0 1.25 / 1.6 0.0 / 0.7 59.5 36.0 39.5
C M32 1¼" or 1" 19.5 26.5 15.5 21.2 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 28.0 41.0 1.6 / 2.0 0.0 / 0.7 68.3 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 36.0 52.6 1.8 / 2.5 0.0 / 1.0 79.0 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 46.0 65.3 1.8 / 2.5 0.0 / 1.0 78.4 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 49.5 58.3 57.0 78.0 1.8 / 2.5 0.0 / 1.0 83.7 95.0 104.0
G M80 3½" 67.0 73.0 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 106.4 115.0
H M90 3½" 67.0 77.6 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 115.0 130.0
J M100 4" 75.0 91.6 - - 88.0 104.5 2.5 / 4.0 0.0 / 1.0 95.6 127.0 142.0
'T' — Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as
standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
All dimensions in millimetres (except * where dimensions are in inches).

¹ Smaller value is applicable when selecting reduced NPT entry option.


² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm.
Technical Data Alternative Reversible Armour
ATEX/IECEx Clamping Rings (RAC)
 Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2 GD. SELECTION TABLE
 Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X.Suitable for use in Zone 1, Size Steel Wire Armour / Braid / Tape
Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. Ref. Orientation 1 Orientation 2
 Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
60079-31.
C2 1.2 - 1.6 0.6 - 1.2
 Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. D 1.45 - 1.8 1.0 - 1.45
 Deluge Protection to DTS01. (Deluge Seal Optional) E 1.45 - 1.8 1.0 - 1.45
 Operating Temperature Range: -60°C to +100°C. F 1.45 - 1.8 1.0 - 1.45
 Assembly Instruction Sheet: AI 302.
c CSA us
 Flameproof AExd IIC Gb, Increased Safety AExe IIC Gb and Dust AExtD Zone 21.
 Explosion-proof Class 1 Division 2 Groups ABCD, Class II Division 2 Groups EFG, Class III.
Alternative certification options available:

 Certificate No’s: CSA1015065 for Marine Shipboard Cable.


 Construction and Test Standards: UL 60079-0, UL 60079-1, UL 60079-7, ISA
60079-31, CSA 22.2 No: 60079-0, CSA 22.2 No: 60079-1, CSA 22.2 No: 60079-7, Ordering Information
CSA 22.2 No: 60079-31, UL 2225 Format for ordering is as follows:
Alternative Clamping Ring (AR), add suffix AR to
Features
ordering information. Alternative Seal (S), add suffix S
 Provides armour clamping using one clamping arrangement for all
to ordering information.
armour / braid types.
 Provides a seal on the cables inner sheath. Cable Gland
Size Thread Material (Optional)
Type
 Provides a cable retention and low smoke and fume, zero halogen seal
onto the cables outer sheath. 501/453/RAC C M32 Brass AR
 Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel 501/453/RAC C 1 ¼" NPT Brass AR
or Aluminium. 501/453/RAC C M32 Brass S
 Brass NPT entries are nickel plated as standard. 501/453/RAC C 1 ¼" NPT Brass S
Connection Solutions
86
www.ehawke.com UPD 141114
Cable Glands 121
Industrial 107
15.0mm (Fully Compressed Length)
'G' Approx
Metric
Entry

Entry Thread
Application

Ø 'B'
• Outdoor or indoor use.
• For use with non-armoured elastomer and plastic insulated cables.

CABLE GLAND SELECTION TABLE


Entry Thread Size Cable Acceptance Details Hexagon Dimensions
NPT * Outer Sheath ‘B’
Size Ref. Standard Seal Alternative Seal (S) 'G' Across Across
Metric Standard or
Flats Corners
Option Min. Max. Min. Max.
2K M16 - 3.0 8.0 - - 23.5 19.0 21.2
Os M20² ½" 3.0 8.0 - - 23.8 24.0 26.5
O M20² ½" 7.5 11.9 - - 23.8 24.0 26.5
A M20 ¾" or ½" 11.0 14.3 8.5 13.4 24.8 30.0 32.5
B M25 1" or ¾" 13.0 20.2 9.5 15.4 25.8 36.0 39.5
C M32 1¼" or 1" 19.0 26.5 15.5 21.2 28.2 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 29.5 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 40.4 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 38.2 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 40.5 95.0 104.0
G M80 3½" 67.0 73.0 - - 41.0 106.4 115.0
H M90 3½" 67.0 77.6 - - 41.0 115.0 130.0
J M100 4" 75.0 91.6 - - 41.0 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). 2K - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread.
For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please
specify when ordering

¹ Smaller value is applicable when selecting reduced NPT entry option.


² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm

Technical Data Features


• Construction and Test Standards: BS EN 62444:2013, BS 6121 : Part 1 Type A2. • Provides a cable retention seal onto the cables outer sheath.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • Manufactured in Brass (standard), Nickel Plated Brass,
to IEC/EN 60529. 316 Stainless Steel or Aluminium.
• Deluge Protection to DTS01. • Brass NPT entries are nickel plated as standard.
• Operating Temperature Range: -60°C to +100°C.
• Assembly Instruction Sheet: AI 392.
Ordering Information
Format for ordering is as follows: Alternate Clamping Ring (S), add suffix S to ordering information.
Cable Gland Type Size Thread (OPTIONAL) Cable Gland Type Size Thread (OPTIONAL)
121 C M32 S 121 C 1 1⁄4"NPT S

Connection Solutions
UPD160915 www.ehawke.com

You might also like