Diamec

Smart 8
Underground core drill rig for
mineral exploration
POWERFUL RIG FOR
DEMANDING APPLICATIONS
Our Diamec Smart 8 is designed for operator safety, robustness
and minimal need for maintenance. It is a preferred choice for
customers who require high productivity and low operational costs
within underground deep hole coring. Our Diamec Smart range
has set a standard in underground core drilling rigs.

MAIN BENEFITS
Equipped with several safety and ergonomic
features which relieves the operator and removes
many hazardous operations

Advanced Rig Control System brings in-

creased productivity and lower operational
costs
Powerful and reliable deep hole coring drill utiliz-
ing a sturdy feed frame and rotation unit

Proven rotation unit with few moving parts increases

life time. The rotation unit and rod holder are synchro-
nized for a safe operation.

Light weight control panel with high quality

touch screen and multifunctional joystick.
The gas spring rod holder is hydraulically Increased safety and productivity thanks An inductive water flow meter, without
opened and closed with gas pressure. to the unique wire line winch design moving elements, and a highly accurate
In case of loss of hydraulic pressure the which enables drilling angles from -90 to pressure sensor increases reliability of the
rod holder closes instantly ensuring that +90 degrees without repositioning. reading and availabiulity of the machine.
the drill string is not lost.

Direct acting telescopic feed cylinder with equal pull/push

force, gives optimal control and same travel speed and force
in both directions.

State of the art rod handling system fully integrated into

the rig and control system.

Powerful electro-hyudraulic power

unit mounted on its own skid for easy
positioning.
 POWER AND SAFETY
IN ONE DRILL RIG
Our Diamec Smart 8 is a true deep hole exploration drill rig, meeting high
standards in underground core drilling. With a drilling depth capacity of up to
2 000 meters, it is the most powerful rig in its class on the market today.

+ THE POWER NEEDED FOR THE JOB

Diamec Smart 8 is the most powerful rig in the Diamec range. The rig
has a compact design, with the ability to handle -90 to +90 degree drilling
angles. A combination of high torque, sturdy feed frame and powerful
power unit, makes the Diamec Smart 8 a star in the deep drilling category.

+ ERGONOMICS AND SAFETY

Diamec Smart 8 can be equipped with a state of the art rod handling
system that relieves the operator and removes many of the hazardous
operations in the drilling process; for example, handling of the inner tube.
All drilling operations are performed from a safe distance with an easy to
use, light weight control panel. The two-hand controller, used for approv-
ing the next step in the drilling cycle, further improves safety.

+ PRODUCTIVITY AND LOWER OPERATIONAL COSTS

The rig has an advanced Rig Control System allowing it to be operated
automatically. From the touch screen on the remote control panel, all
drilling parameters are easily set and monitored. The automatic drilling of
the complete run with constant penetration rate, can improve bit life up to
400% compared to manual drilling. Automatic drilling also reduces risk for
core blockage and hole deviation.

ATLAS COPCO SERVICE

Even the best equipment requires regular service to
ensure optimal performance. Atlas Copco provides
service solutions to safeguard an optimized
relationship between productivity, availability and
operational cost. Atlas Copco Mining and Rock
Excavation Technique has over 3 300 technicians
located in over 80 countries. By combining the
usage of Atlas Copco genuine parts with service
provided by a certified Atlas Copco technician,
you’ll have a winning combination no matter
of where in the world you operate.
TECHNICAL SPECIFICATIONS

CORE DRILLING DEPTH CAPACITY

The below drill depth capacities only serve as guidelines and refer to vertical down drilling. Atlas Copco cannot guarantee that these results can be achieved in all drilling conditions.
Metric Imperial
B wireline 2 000 m 6 561 ft
N wireline 1 600 m 5 249 ft
H wireline 1 050 m 3 444 ft

ROTATION UNIT
High torque, high speed, hollow spindle rotation unit with patented hydraulic chuck and sealed housing. Metric Imperial
Model 160CC B-H 160CC B-H
Rod sizes B-H B-H
Max torque 2 425 Nm 1 789 ft lbf
Max rotation speed 1 400 rpm 1 400 rpm
Spindle (inner diameter) 101 mm 4.0 in
Power Hydraulic motor Hydraulic motor
Chuck axial holding force 150 kN 33 729 lbf
Weight 280 kg 617 lb

FEED FRAME
Compact Feed frame with direct acting telescopic cylinder provides the same force in both directions. Metric Imperial
Feed stroke length 1 800 mm 71 in
Feed force / Pull force 134 kN 30 173 lbf
Max feed speed 0.8 m/s 2.6 fps

ROD HOLDER
Hydraulically open and gas pressure closed. In case of loss of hydraulic pressure, the rod holder closes instantly.
Metric Imperial
Max rod size 117.5 mm 4.6 in
Bore (without jaws) 124 mm 4.9 in
Axial holding force TC inserts 133 kN 29 000 lbf

WIRELINE HOIST
Metric Imperial
Capacity (5 mm wire) 2 000 m 6 561 ft
Pull min. (full drum) 3.3 kN 752 lbf
Pull max. (empty drum) 11.8 kN 2 647 lbf
Line speed min (empty drum) 98 m/min 323 ft/min
Line speed max (full drum) 346 m/min 1 136 ft/min
Weight (without wire) 213 kg 470 lb
Level wind angle Adjustable Adjustable

CONTROL SYSTEM AND INTERFACE

Control system type Atlas Copco Rig Control System 4 (RCS 4)
Display 17" touch screen
Controls Joystick, control knob and foot pedal
Data logging Internal memory and Measure While Drilling (MWD)
Data Export USB Port
Metric Imperial
Weight 24 kg 53 lb
TECHNICAL SPECIFICATIONS

POWER UNIT
Electrical power unit with two variable flow hydraulic pumps, mounted in tandem.
Specifications Metric Imperial
Power 110 kW 149 hp
RPM (50Hz/60Hz) 1 487 rpm / 1 789 rpm 1 487 rpm / 1 789 rpm
Cooler Water and air oil cooler Water and air oil cooler
Oil tank 130 l 34.4 gal
Main pump
Max flow 200 l/m 52.8 gpm
Max Presure 315 bar 4 569 psi
Service pump
Max flow 65 l/m 17.2 gpm
Max pressure 240 bar 3.481 psi
Aux pump (Water)
Max flow 65 l/m 17.2 gpm
Max Pressure 240 bar 3.481 psi
Dimensions
A 2 260 mm 89 in
B 1 460 mm 57 in
C 890 mm 35 in
Weight 1 760 kg 3 880 Ib

OPTIONAL EQUIPMENT
ROD HANDLING SYSTEM
Integration to rig Fully integrated with the rig control system for increased safety and speed
Size coverage A,B, N and H wire line
Length coverage 1.5 m (4.9’) and 3 m (9.8’) rods and core barrel
Gripper N size gripper is standard. Other sizes sold as a separate kit
FLUSH PUMP
Designed for mud and water flushing. The distribution block is prepared for mounting of accumulator and adjustable steady flow valve. Metric Imperial
Model Trido 140H Trido 140H
Flow 140 l/m 37 gpm
Pressure 70 bar 1 000 psi
Weight 230 kg 507 lb
OTHER OPTIONS AND ACCESSORIES
Dimension kits: jaws and bushing kits in different sizes - steel and TC inserts (for better gripping force)
Key hole wall bracket for B-H sizes - this enables drilling of anchor holes by the rig itself
RCS service box: includes testing equipment for troubleshooting of RCS control system

WORKING POSITIONS FROM -90 TO +90

TECHNICAL SPECIFICATIONS

With RHS Without RHS

WORKING DIMENSIONS
With RHS Without RHS
Dimension Metric Imperial Metric Imperial
A 4 200 mm 165 in 4 200 mm 165 in
B 4 200 mm 165 in 4 200 mm 165 in
C 4 700 mm 185 in 4 700 mm 185 in
D 4 400 mm 173 in 4 400 mm 173 in
E 4 900 mm 193 in 4 900 mm 193 in
F 2 430 mm 96 in 1 480 mm 58 in

With RHS Without RHS

TRANSPORT DIMENSIONS AND WEIGHT

With RHS Without RHS
Dimension Metric Imperial Metric Imperial
A 4 200 mm 165 in 4 200 mm 165 in
B 1 680 mm 66 in 1 680 mm 66 in
C 2 320 mm 91 in 2 320 mm 91 in
D 1 860 mm 73 in 1 480 mm 58 in
E 1 162 mm 46 in 1 162 mm 46 in
Weight (incl. Rotation Unit) 4 050 kg 8 930 lb 3 350 kg 7 390 lb
6991 1820 01 2016 Örebro, Sweden. Legal Notice © Copyright 2016, Atlas Copco AB. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part
thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice.
Consult your Atlas Copco Customer Center for specific information.

COMMITTED TO SUSTAINABLE PRODUCTIVITY

We stand by our responsibilities towards our customers,
towards the environment and the people around us.

This is what we call – Sustainable Productivity.

We make performance stand the test of time.

www.atlascopco.com