Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Max. Condensing Operating Condition in Summer

    Uploaded by

    ManekGoris
    The document contains calculations of steam leakage at different sections of steam seals in a power plant under various operating conditions. It provides the steam seal parameters like number of teeth, diameter, gap and leakage area for each section. It then lists the steam leakage flow rates in tons per hour for the rated operating condition and other maximum/minimum conditions at each section. The document further specifies the distribution of the leaked steam flow entering various heat exchangers, deaerator and sealing devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Max. Condensing Operating Condition in Summer

    Uploaded by

    ManekGoris
    17 views1 page
    The document contains calculations of steam leakage at different sections of steam seals in a power plant under various operating conditions. It provides the steam seal parameters like number of teeth, diameter, gap and leakage area for each section. It then lists the steam leakage flow rates in tons per hour for the rated operating condition and other maximum/minimum conditions at each section. The document further specifies the distribution of the leaked steam flow entering various heat exchangers, deaerator and sealing devices.

    Original Description:

    good

    Original Title

    Q4036N-JS4(e)4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains calculations of steam leakage at different sections of steam seals in a power plant under various operating conditions. It provides the steam seal parameters like number of teeth, diameter, gap and leakage area for each section. It then lists the steam leakage flow rates in tons per hour for the rated operating condition and other maximum/minimum conditions at each section. The document further specifies the distribution of the leaked steam flow entering various heat exchangers, deaerator and sealing devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views1 page

    Max. Condensing Operating Condition in Summer

    Uploaded by

    ManekGoris
    The document contains calculations of steam leakage at different sections of steam seals in a power plant under various operating conditions. It provides the steam seal parameters like number of teeth, diameter, gap and leakage area for each section. It then lists the steam leakage flow rates in tons per hour for the rated operating condition and other maximum/minimum conditions at each section. The document further specifies the distribution of the leaked steam flow entering various heat exchangers, deaerator and sealing devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Q4036N-JS4(e)

    5. 汽封漏汽计算Steam sea leakage calculation

    5.1 各段汽封漏汽流量Steam sea leakage flow at all sections

    后 汽 封 Rear
    前 汽 封Front steam seal
    steam seal

    段号Section No. 1 2 3 4 5 1 2

    汽封齿数Steam seal teeth number 80 30 10 10 10 10 5

    汽封直径Steam seal diameter cm 62.0 62.0 62.0 44.8 44.8 33.0 33.0

    汽封间隙Steam seal gap cm 0.05 0.05 0.05 0.05 0.05 0.05 0.05

    漏汽面积Steam leakage area cm2 9.739 9.739 9.739 7.037 7.037 5.184 5.184

    rated condensing operating condition 3.162 1.764 0.415 -0.122 0.047 -0.128 0.065

    max. power condition 3.464 1.932 0.458 -0.117 0.047 -0.128 0.065
    漏汽量 condensing operating condition in summer 3.269 1.816 0.426 -0.120 0.047 -0.128 0.065
    Steam
    leakage max. condensing operating condition in summer 3.641 2.019 0.479 -0.114 0.047 -0.128 0.065
    amount
    t/h high pressure heater cut condition 2.990 1.862 0.432 -0.121 0.048 -0.128 0.065

    75% condensing operating condition 2.399 1.364 0.319 -0.131 0.048 -0.128 0.065

    50% condensing operating condition 1.670 0.971 0.226 -0.137 0.048 -0.128 0.065

    5.2 进入各换热器的流量(包括阀杆漏汽)Flow rate into the heat exchangers (including steam leakage from valve rod)

    1号高 3号低 1号低


    加No. 1 加No. 3 加No. 1 汽封加热器
    至除氧器to 自密封装置self
    漏汽去向steam leakage direction high low low steam seal
    deaerator sealing device
    pressur pressur pressur hedater
    e heater e heater e heater

    rated condensing operating condition 1.398 1.349 0.537 1.20 -0.362 0.212

    max. power condition 1.532 1.474 0.575 1.20 -0.357 0.212

    condensing operating condition in summer 1.453 1.39 0.546 1.20 -0.360 0.212
    流量
    flow max. condensing operating condition in summer 1.622 1.54 0.593 1.20 -0.354 0.212
    rate t/h
    high pressure heater cut condition 1.128 1.43 0.553 1.20 -0.362 0.213

    75% condensing operating condition 1.035 1.045 0.45 1.20 -0.372 0.213

    50% condensing operating condition 0.699 0.745 0.363 1.20 -0.378 0.213

    第 1 页，共 1 页

    You might also like