Scribd
Upload
350 views14 pages

Punching Shear

This document summarizes the design of punching shear reinforcement for several slab projects. It provides input data such as material strengths, slab thickness, reinforcement details, column sizes and loads. Calculations are shown to check the concrete shear stress and shear at the column face and at a distance of 1.5 times the effective depth from the face to determine if shear links are required. The documents conclude that for the given inputs and calculations, no shear links are needed.

Uploaded by

shamen amarasekara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
350 views14 pages

Punching Shear

This document summarizes the design of punching shear reinforcement for several slab projects. It provides input data such as material strengths, slab thickness, reinforcement details, column sizes and loads. Calculations are shown to check the concrete shear stress and shear at the column face and at a distance of 1.5 times the effective depth from the face to determine if shear links are required. The documents conclude that for the given inputs and calculations, no shear links are needed.

Uploaded by

shamen amarasekara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 14

DESIGN ON SLAB PUNCHING SHEAR

PROJECT : IR
JOB NO. : Universal Studio
LOCATION : FC-07
PREPARED BY : KS

A. INPUT DATA
fcu = 55 N/mm2
fy = 460 N/mm2
fyv = 460 N/mm2
Thickness of Slab, h = 600 mm
Concrete Cover, c = 50 mm

Slab Reinft. Provided, Ast = T 16 - 200 c/c (TT) and T 0- 250 c/c (T)
= 1005 mm2 + 0 mm2
= 1005 mm2
Asb = T 16 - 200 c/c (BB) and T 0- 250 c/c (B)
= 1005 mm2 + 0 mm2
= 1005 mm2

Effective depth, d= 534 mm

Column Size, Cx = 800 mm


Cy = 800 mm

Column Load, Vult = 1875 KN

B. CONCRETE SHEAR STRESS


CP 65 Cl.3.4.5.4 & Table 3.9
(100*Asb)/(bv*d) = 0.188 should not be greater than 3.
400/d = 0.749 or 1.0 whichever is greater.
(fcu/30)1/3 = 1.224
vc = 0.412 N/mm2

C. CHECK SHEAR @ COLUMN FACE


CP 65 Cl.3.7.6.4 & Cl.3.7.7.2
Uc = 2*(Cx+Cy)
= 3200 mm

v= Vult/(Uc*d)
= 1.097 N/mm2 less than vmax, O.K.
where
vmax = 0.8*fcu^0.5 or 5 N/mm2 whichever smaller
= 5 N/mm2

D. CHECK SHEAR @ 1.5d FROM COLUMN FACE (ZONE 1)

av = 1.5d = 801 mm

Perimeter, Up = 12*d+2*(Cx+Cy)
= 9608 mm

CP 65 Cl.3.7.7.3 & Cl.3.7.7.4


v= Vult/(Up*d)
= 0.365 N/mm2 less than vc,
O.K., No Shear Links is required.
vc = 0.412 N/mm2

v/vc = 0.89
SAsv*sina >= No Shear Links required.

CP 65 Cl.3.7.7.6 & Fig.3.17


Provided Links, 10 T 13 - 250 c/c, Asv = 10202 mm2, N.A.
(At least two perimeters of Links) (<=1.5d)
(<= 801 mm )
DESIGN ON SLAB PUNCHING SHEAR
PROJECT : IR
JOB NO. : MICHAEL
LOCATION : CX22-CY2-1
PREPARED BY : KS

A. INPUT DATA
fcu = 55 N/mm2
fy = 460 N/mm2
fyv = 460 N/mm2
Thickness of Slab, h = 2500 mm
Concrete Cover, c = 50 mm

Slab Reinft. Provided, Ast = T 32 - 250 c/c (TT) and T 0- 250 c/c (T)
= 3217 mm2 + 0 mm2
= 3217 mm2
Asb = T 40 - 125 c/c (BB) and T 0- 250 c/c (B)
= ### mm2 + 0 mm2
= ### mm2

Effective depth, d= 2410 mm

Column Size, Cx = 1200 mm


Cy = 1200 mm

Column Load, Vult = ### KN

B. CONCRETE SHEAR STRESS


CP 65 Cl.3.4.5.4 & Table 3.9
(100*Asb)/(bv*d) = 0.417 should not be greater than 3.
400/d = 0.166 or 1.0 whichever is greater.
(fcu/30)1/3 = 1.224
vc = 0.537 N/mm2

C. CHECK SHEAR @ COLUMN FACE


CP 65 Cl.3.7.6.4 & Cl.3.7.7.2
Uc = 2*(Cx+Cy)
= 4800 mm

v= Vult/(Uc*d)
= 2.42 N/mm2 less than vmax, O.K.
where
vmax = 0.8*fcu^0.5 or 5 N/mm2 whichever smaller
= 5 N/mm2

D. CHECK SHEAR @ 1.5d FROM COLUMN FACE (ZONE 1)

av = 1.5d = 3615 mm

Perimeter, Up = 12*d+2*(Cx+Cy)
= ### mm

CP 65 Cl.3.7.7.3 & Cl.3.7.7.4


v= Vult/(Up*d)
= 0.345 N/mm2 less than vc,
O.K., No Shear Links is required.
vc = 0.537 N/mm2

v/vc = 0.64
SAsv*sinS >= No Shear Links required.

CP 65 Cl.3.7.7.6 & Fig.3.17


Provided Links, 2 T 0- 250 c/c, Asv = 0 mm2, N.A.
(At least two perimeters of Links) (<=1.5d)
(<= 3615 mm )
DESIGN ON SLAB PUNCHING SHEAR
PROJECT : IR
JOB NO. : Maxims
LOCATION : CX24-CY4
PREPARED BY : KS

A. INPUT DATA
fcu = 55 N/mm2
fy = 460 N/mm2
fyv = 460 N/mm2
Thickness of Slab, h = 1200 mm
Concrete Cover, c = 50 mm

Slab Reinft. Provided, Ast = T 25 - 250 c/c (TT) and T 32 - 250 c/c (T)
= 1963 mm2 + 3217 mm2
= 5180 mm2
Asb = T 20 - 250 c/c (BB) and T 40 - 250 c/c (B)
= 1257 mm2 + 5027 mm2
= 6283 mm2

Effective depth, d= 1130 mm

Column Size, Cx = 800 mm


Cy = 800 mm

Column Load, Vult = 11100 KN

B. CONCRETE SHEAR STRESS


CP 65 Cl.3.4.5.4 & Table 3.9
(100*Asb)/(bv*d) = 0.556 should not be greater than 3.
400/d = 0.354 or 1.0 whichever is greater.
(fcu/30)1/3 = 1.224
vc = 0.591 N/mm2

C. CHECK SHEAR @ COLUMN FACE


CP 65 Cl.3.7.6.4 & Cl.3.7.7.2
Uc = 2*(Cx+Cy)
= 3200 mm

v= Vult/(Uc*d)
= 3.07 N/mm2 less than vmax, O.K.
where
vmax = 0.8*fcu^0.5 or 5 N/mm2 whichever smaller
= 5 N/mm2

D. CHECK SHEAR @ 1.5d FROM COLUMN FACE (ZONE 1)

av = 1.5d = 1695 mm

Perimeter, Up = 12*d+2*(Cx+Cy)
= ### mm

CP 65 Cl.3.7.7.3 & Cl.3.7.7.4


v= Vult/(Up*d)
= 0.586 N/mm2 less than vc,
O.K., No Shear Links is required.
vc = 0.591 N/mm2

v/vc = 0.99
SAsv*sinS >= No Shear Links required.

CP 65 Cl.3.7.7.6 & Fig.3.17


Provided Links, 2 T 0- 300 c/c, Asv = 0 mm2, N.A.
(At least two perimeters of Links) (<=1.5d)
(<= 1695 mm )
DESIGN ON SLAB PUNCHING SHEAR
PROJECT : IR
JOB NO. : MICHAEL
LOCATION : CX17-CY22
PREPARED BY : KS

A. INPUT DATA
fcu = 55 N/mm2
fy = 460 N/mm2
fyv = 460 N/mm2
Thickness of Slab, h = 1200 mm
Concrete Cover, c = 50 mm

Slab Reinft. Provided, Ast = T 25 - 250 c/c (TT) and T 0- 250 c/c (T)
= 1963 mm2 + 0 mm2
= 1963 mm2
Asb = T 20 - 250 c/c (BB) and T 40 - 250 c/c (B)
= 1257 mm2 + 5027 mm2
= 6283 mm2

Effective depth, d= 1130 mm

Column Size, Cx = 800 mm


Cy = 800 mm

Column Load, Vult = 6500 KN

B. CONCRETE SHEAR STRESS


CP 65 Cl.3.4.5.4 & Table 3.9
(100*Asb)/(bv*d) = 0.556 should not be greater than 3.
400/d = 0.354 or 1.0 whichever is greater.
(fcu/30)1/3 = 1.224
vc = 0.591 N/mm2

C. CHECK SHEAR @ COLUMN FACE


CP 65 Cl.3.7.6.4 & Cl.3.7.7.2
Uc = 2*(Cx+Cy)
= 3200 mm

v= Vult/(Uc*d)
= 1.798 N/mm2 less than vmax, O.K.
where
vmax = 0.8*fcu^0.5 or 5 N/mm2 whichever smaller
= 5 N/mm2

D. CHECK SHEAR @ 1.5d FROM COLUMN FACE (ZONE 1)

av = 1.5d = 1695 mm

Perimeter, Up = 12*d+2*(Cx+Cy)
= ### mm

CP 65 Cl.3.7.7.3 & Cl.3.7.7.4


v= Vult/(Up*d)
= 0.343 N/mm2 less than vc,
O.K., No Shear Links is required.
vc = 0.591 N/mm2

v/vc = 0.58
SAsv*sinS >= No Shear Links required.

CP 65 Cl.3.7.7.6 & Fig.3.17


Provided Links, 2 T 0- 300 c/c, Asv = 0 mm2, N.A.
(At least two perimeters of Links) (<=1.5d)
(<= 1695 mm )
DESIGN ON SLAB PUNCHING SHEAR
PROJECT : KAKI BUKIT DORMITORY
JOB NO. : N/A
LOCATION : 2F FLAT SLAB
PREPARED BY : NADA

A. INPUT DATA
fcu = 35 N/mm2
fy = 460 N/mm2
fyv = 460 N/mm2
Thickness of Slab, h = 200 mm
Concrete Cover, c = 30 mm

Slab Reinft. Provided, Ast = T 10 - 200 c/c (TT) and T 10 - 400 c/c (T)
= 393 mm2 + 196 mm2
= 589 mm2
Asb = T 10 - 200 c/c (BB) and T 0- 100 c/c (B)
= 393 mm2 + 0 mm2
= 393 mm2

Effective depth, d= 160 mm

Column Size, Cx = 250 mm


Cy = 900 mm

Column Load, Vult = 111 KN

B. CONCRETE SHEAR STRESS


CP 65 Cl.3.4.5.4 & Table 3.9
(100*Asb)/(bv*d) = 0.245 should not be greater than 3.
400/d = 2.5 or 1.0 whichever is greater.
(fcu/30)1/3 = 1.053
vc = 0.538 N/mm2

C. CHECK SHEAR @ COLUMN FACE


CP 65 Cl.3.7.6.4 & Cl.3.7.7.2
Uc = 2*(Cx+Cy)
= 2300 mm

v= Vult/(Uc*d)
= 0.302 N/mm2 less than vmax, O.K.
where
vmax = 0.8*fcu^0.5 or 5 N/mm2 whichever smaller
= 4.733 N/mm2

D. CHECK SHEAR @ 1.5d FROM COLUMN FACE (ZONE 1)

av = 1.5d = 240 mm

Perimeter, Up = 12*d+2*(Cx+Cy)
= 4220 mm

CP 65 Cl.3.7.7.3 & Cl.3.7.7.4


v= Vult/(Up*d)
= 0.164 N/mm2 less than vc,
O.K., No Shear Links is required.
vc = 0.538 N/mm2 <

v/vc = 0.31
SAsv*sinS >= No Shear Links required.

CP 65 Cl.3.7.7.6 & Fig.3.17


Provided Links, 0 T 0- 100 c/c, Asv = 0 mm2, N.A.
(At least two perimeters of Links) (<=1.5d)
(<= 240 mm )
DESIGN ON SLAB PUNCHING SHEAR
PROJECT : JALAN LEMPENG
JOB NO. : N/A
LOCATION : 8 TH FLAT SLAB
PREPARED BY : PS

A. INPUT DATA
fcu = 30 N/mm2
fy = 460 N/mm2
fyv = 460 N/mm2
Thickness of Slab, h = 200 mm
Concrete Cover, c = 25 mm

Slab Reinft. Provided, Ast = T 10 - 200 c/c (TT) and T 0 - 400 c/c (T)
= 393 mm2 + 0 mm2
= 393 mm2
Asb = T 10 - 200 c/c (BB) and T 0 - 100 c/c (B)
= 393 mm2 + 0 mm2
= 393 mm2

Effective depth, d = 165 mm

Column Size, Cx = 200 mm


Cy = 200 mm

Column Load, Vult = 11 KN

B. CONCRETE SHEAR STRESS


CP 65 Cl.3.4.5.4 & Table 3.9
(100*Asb)/(bv*d) = 0.238 should not be greater than 3.
400/d = 2.424 or 1.0 whichever is greater.
(fcu/30)1/3 = 1.000
vc = 0.52 N/mm2

C. CHECK SHEAR @ COLUMN FACE


CP 65 Cl.3.7.6.4 & Cl.3.7.7.2
Uc = 2*(Cx+Cy)
= 800 mm

v = Vult/(Uc*d)
= 0.083 N/mm2 less than vmax, O.K.
where
vmax = 0.8*fcu^0.5 or 5 N/mm2 whichever smaller
= 4.382 N/mm2

D. CHECK SHEAR @ 1.5d FROM COLUMN FACE (ZONE 1)

av = 1.5d = 247.5 mm

Perimeter, Up = 12*d+2*(Cx+Cy)
= 2780 mm

CP 65 Cl.3.7.7.3 & Cl.3.7.7.4


v = Vult/(Up*d)
= 0.024 N/mm2 less than vc,
O.K., No Shear Links is required.
vc = 0.52 N/mm2 <

v/vc = 0.05
SAsv*sinS >= No Shear Links required.

CP 65 Cl.3.7.7.6 & Fig.3.17


Provided Links, 1 T 10 - 200 c/c, Asv = 3275 mm2, N.A.
(At least two perimeters of Links) (<=1.5d)
(<= 247.5 mm )

You might also like