Scribd
Upload
188 views

BBS Intro

The document discusses bar bending schedules (BBS), including how to prepare BBS for different reinforced concrete structures like beams, slabs, and columns. It provides examples of typical BBS format and calculations, showing member identification, bar details, dimensions, and totals. Guidelines are given for accurate BBS, including standards for bar placement, bundling, and welding. Common codes and specifications for BBS are also listed.

Uploaded by

Kaushal Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
188 views

BBS Intro

The document discusses bar bending schedules (BBS), including how to prepare BBS for different reinforced concrete structures like beams, slabs, and columns. It provides examples of typical BBS format and calculations, showing member identification, bar details, dimensions, and totals. Guidelines are given for accurate BBS, including standards for bar placement, bundling, and welding. Common codes and specifications for BBS are also listed.

Uploaded by

Kaushal Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

CONTENT

 Introduction
 B B S for different reinforced concrete structures
 Measurement of bending dimensions
 Do’s and Don'ts
 Typical bar bending schedule
 Codes , specifications and standards
Bar Bending Schedule
 Member identification
 Bar mark
 Type of steel
 Diameter of bar
 Length of each bar
 Number of members
 Number of bars in each member
 Total number of bars
 Total length
 Shape code
 Bending dimensions
BBS for RC Beams
BBS for RC Slabs
BBS for Columns and walls
Measurement of bending dimensions

Bent-up Bar
h

2h
h
45o

Additional Length = 0.414 h


Total Length = L + 0.414 h
Do’s and Don’ts
 Proper accuracy  Bars >36mm shall not
 Provide cover to rein bundled
 Location of holes  Welding is not permitted
at bends
Typical BBS Calculation
Example: Prepare bar bending schedule for the given beam. Clear
cover = 40 mm

2-#10 #10 @ 180 c/c

1-# 15
570 2-#20 +1-#15 2-#20

4000

Longitudinal Section
228
Bar Bending Schedule (contd…)
Example: Prepare bar bending schedule for the given beam. Clear
cover = 40 mm
2-#10
(H-1)

#10 @ 180 c/c 375


(S-1)
2-#20
(M-1)

1-# 15
(M-2)
228

Cross Section
Bar Bending Schedule (contd…)
Example:

M-1 = 4000 + 2 x 228 – 2 x 40 + 2 x (18


x 20) M-1

= 5096
h = 375 – 2 x 40 – 2 x 10 – 2 (15/2) = M-2
h
260

M-2 = 4000 + 2 x 228 – 2 x 40 + (0.414 x 260) x 2


= 5091
H-1
H-1 = 4000 + 2 x 228 – 2 x 40
= 4376
Bar Bending Schedule (contd…)
Example: Prepare bar bending schedule for the given beam. Clear
cover = 40 mm

Shear stirrups

a
Number of Bars = 4000 / 180 +1 = 24 Round-up

a = 375 – 2 x 40 – 10 = 285 mm

b = 228– 2 x 40 – 10 =138 mm b
Total length of S-1 = 2 (138 + 285 + 18 x 10) = 1206 mm
Bar Bending Schedule

Length Weight of Steel


Dia Shape of Bar
Serial Bar Number of one Bars
# of Bars Bar of
Designation
bar
(m) #10 #15 #20

4376
1 M-1 2 5.096 20 24

2 M-2 1 4.591 15 7.2


4376

4376
3 H-1 2 4.376 10 6.9

4 S-1 24 1.206 10 22.7 138 285

1.05 Σ 31.1 7.6 25.2

Total Weight = 64 kg
CODES , SPECIFICATIONS & STANDARDS
some websites which are proving Bar
 IS:2502-1963 Bending Schedule Software.
 IS:1893-2000 1. www.eigen-tech.com/cs.html
2. www.rgsrebar.com/rebar.aspx
 SP:34 3. www.ensoftindia.com/prod_barbeq
ue.htm
 IS:456 4. www.steelpac.co.uk/design/steelp
ac_rdm...
 International standard
5. www.cadsglobal.com
ISO:4066-1977 6. www.supercivilcd.com
7. www.technocad.co.za
8. www.BendingSchedule.com
9. www.structural-
engineering.fsnet.co.uk...
10. www.continuousbeamanalysis.co
m

You might also like