Cladding for buildings

For information about the Grenfell Tower cladding see: ACM cladding.

Contents

[hide]

 1 Introduction
 2 Types of cladding
 2.1 Curtain walling
 2.2 Sandwich panels
 2.3 Patent glazing
 2.4 Rainscreen
 2.5 Timber cladding
 2.6 Metal profile cladding
 2.7 Tensile fabric coverings
 2.8 Brick slips
 2.9 Tile hanging
 2.10 Shakes and shingle
 2.11 uPVC
 3 Related articles on Designing Buildings Wiki
 4 External references
 Introduction

The term 'cladding' refers to components that are attached to the primary structure of a buildingto form
non-structural, external surfaces. This is as opposed to buildings in which the external surfaces are
formed by structural elements, such as masonry walls, or applied surfaces such as render.

Whilst cladding is generally attached to the structure of the building, it typically does not contribute to its
stability. However, cladding does play a structural role, transferring wind loads, impact loads,
snow loads and its own self-weight back to the structural framework.

In particular, wind causes positive and negative pressure on the surface of buildings and cladding must
have sufficient strength and stiffness to resist this load, both in terms of the type of cladding selected and
its connections back to the structure.

Cladding is needed to:

 Create a controlled internal environment.

 Protect the building from external conditions.
 Provide privacy and security.
 Prevent the transmission of sound.
 Provide thermal insulation.
 Create an external facade.
 Prevent the spread of fire.
 Generate an 'airtight' building envelope.
 Providing openings for access, daylight and ventilation.

Cladding is often prefabricated in panels that are attached to the structural frame of the building, and
some cladding systems can be purchased 'off the shelf'.

Cladding systems may include additional components, such as windows, doors, gutters, roof lights, vents
and so on.

The nature of cladding selected for a particular building will depend on considerations such as:

 How the building is going to be used.

 Internal and external conditions.
 Durability.
 Local context.
 Planning requirements.
 Building regulations requirements.
 Accessibility and buildability.
 Appearance.
 Availability.
 Budget.
 Maintenance requirements.
 Structural requirements.

High-quality, well-designed, properly-installed cladding can help maximise thermal performance,

minimise air leakage, and optimise natural daylighting. This can help reduce the need for mechanical and
electrical building services, and so improve energy efficiency and lower capital and running costs.

Poor design detailing or installation may compromise cladding performance and can result
in safety problems such as cladding collapse or cladding panels pulling away from the structure.

When selecting or designing a suitable cladding, designers should pay particular attention to:

 Design detailing.
 Control of air leakage.
 Control of condensation.
 Integrity and continuity of Insulation.
 Prevention of water penetration, or provision of drainage.
 Control of thermal movement.
 Spread of fire.
 Ease of installation.
 External attachments and fixings.
 Cleaning.
 Maintenance, remedial work and renewal.
 Resilience, strength and durability.

Types of cladding

The NBS Building libraries categorise claddings and coverings as:

H10 Patent glazing

H11 Curtain walling

H13 Structural glass assemblies

H14 Precast concrete and glass lens /

paver rooflights / floor lights / pavement lights / security panels
H20 Rigid sheet cladding

H21 Timber weatherboarding

H22 Plastics weatherboarding

H30 Fibre cement profiled sheet cladding / covering

H31 Metal profiled / flat sheet cladding / covering

H32 Plastics profiled sheet cladding / covering

H40 Glass fibre reinforced concrete panel cladding / components

H41 Glass fibre reinforced plastics cladding / features

H42 Precast concrete panel cladding / features

H43 Metal composite panel cladding / features

H51 Natural stone slab cladding / lining / features

H60 Plain roof tiling

H61 Fibre cement slating

 H62 Natural slating

H64 Wood shingle and shake roofing

H65 Single lap roof tiling

H67 Metal single lap roof tiling

H71 Lead sheet coverings / flashings

H72 Aluminium strip / sheet coverings / flashings

H73 Copper strip / sheet coverings / flashings

H74 Zinc strip / sheet coverings / flashings

H75 Stainless steel strip / sheet coverings / flashings

H90 Tensile fabric coverings

H91 Thatch roofing

H92 Rainscreen cladding

Some of the more common types of cladding are described below.

Curtain walling
Curtain wall systems are a non-structural cladding system for the external walls of buildings. They are
generally associated with large, multi-storey buildings. Typically curtain wall systemscomprise a
lightweight aluminium frame onto which glazed or opaque infill panels can be fixed. These infill panels are
often described as 'glazing' whether or not they are made of glass.

See Curtain wall systems for more information.

Sandwich panels

Sandwich panels (sometimes referred to as composite panels or structural insulating panels(SIP)) consist
of two layers of a rigid material bonded to either side of a lightweight core, so that the
three components act as a composite.

See Sandwich panel and Metal composite panels for more information.

Patent glazing

The term ‘patent glazing’ refers to a non-load bearing, two-edge support cladding system. Patent
glazing bars provide continuous support along two edges of glazing infill panels (rather than four-edge
curtain walling), and are fixed back to the main structure of the building. This system supports its own
weight, and provides resistance to wind and snow loading, but does not contribute to the stability of the
primary structure of the building.

See Patent glazing for more information.

Rainscreen

A rainscreen (sometimes referred to as a ‘drained and ventilated’ or ‘pressure-equalised’ façade) is part

of a double-wall construction. The rainscreen itself simply prevents significant amounts of water from
penetrating into the wall construction. Thermal insulation, airtightnessand structural stability are provided
by the second, inner part of the wall construction.

See Rainscreen for more information.

Timber cladding

One of the most popular methods of cladding is through the use of timber softwoods, such as western
red cedar. This type of wood is relatively knot-free and has a natural resistance to decay and moisture. It
can be readily stained or painted and altered to create a range of profiles.
Hardwoods can also be used including oak and sweet chestnut. Both of which contain high tannin levels
which can result in leaching and streaking after exposure to the elements. Thermally modified timbers are
also being used such as Kebony, Keywood, Platowood and ThermoWood. These softwoods are heated
to high temperatures which removes moisture and resins, resulting in a stable and durable material.

See Timber cladding for more information.

Metal profile cladding

Sheets are manufactured in a range of corrugated and other profiles, such as trapezoidal, sinusoidal or
half-round. The profiles are manufactured from sheets fed through banks of forming rollers.

See Metal profile cladding for more information.

Tensile fabric coverings

A fabric membrane is 'stretched' to form a three-dimensional surface that may be used to create a roof,
shading, or decorative component. Sometimes described as 'modern tents', fabric structures use very
little material compared to other forms of construction, and are typically translucent, but they provide
little thermal mass or insulation and can have a shorter lifespan than some materials.

See Fabric structures for more information.

Brick slips

Brick slips are thin layers of masonry and are of similar appearance to conventional bricks. They are
available in a variety of styles and colours.

See Bricks for more information.

Tile hanging

The traditional method of cladding a property is through the use of tiles. The addition of which can add
character to older properties.

Shakes and shingle

Shakes and shingles are produced from split logs and look similar to timber tiles. Shakes are typically split
from the log using a chisel and mallet whilst shingles are sawn off.

For more information, see Shingle roofing.

 uPVC

One of the cheaper forms of cladding is uPVC with white being the cheapest option. It can have fewer
detailing requirements than timber and requires less maintenance, although it can discolour with age.

For more information, see uPVC weatherboarding and Plastic cladding.

Related articles on Designing Buildings Wiki

 ACM cladding.
 Brick.
 BS 8414 Fire performance of external cladding systems.
 Building fabric.
 Curtain wall systems.
 External wall insulation.
 Fire in buildings.
 Fire performance of external thermal insulation for walls of multistorey buildings, third edition (BR 135).
 Glass fibre.
 Infill panel walls.
 Metal composite panels.
 Metal profile cladding.
 Natural stone cladding.
 Patent glazing.
 Pebbledash.
 Plastic.
 Plastic cladding.
 Rainscreen.
 Sandwich panel.
 Structural glass assembly.
 Structural Insulated Panels.
 Wall types.
 Weatherboarding.