Scribd
Upload
567 views2 pages

T Beam Design Spreadsheet

This document provides instructions for designing T beams by inputting parameters such as the web width, flange depth, design moment, grade of concrete and steel, and flange width. The output will calculate the required depth (d) of the beam, area of compression steel (Asc), and area of tension steel (Ast) based on the inputs.

Uploaded by

Isprotec Ingenieria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
567 views2 pages

T Beam Design Spreadsheet

This document provides instructions for designing T beams by inputting parameters such as the web width, flange depth, design moment, grade of concrete and steel, and flange width. The output will calculate the required depth (d) of the beam, area of compression steel (Asc), and area of tension steel (Ast) based on the inputs.

Uploaded by

Isprotec Ingenieria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Design of T beams

INPUT
Enter the width of the web(mm)
Enter the depth of the flange(mm)
Enter the Design Moment(KNm)
Enter the grade of concrete
Enter the grade of steel
Enter the flange width

by OUTPUT

Shahe Asekeen d(mm)


Dept. Of CE Asc(mm2)
AUST Ast(mm2)
0 0.8
0.0001 0.85 250 15
0.0002 0.875 415 20
0.0003 0.9 500
0.0004 0.9125
0.0005 0.925
0.0006 0.9375
0.0007 0.95
0.0008 0.958333
0.0009 0.966667
0.001 0.975
0.0011 0.9775
0.0012 0.98
0.0013 0.9825
0.0014 0.985
0.0015 0.9875
0.0016 0.99
0.0017 0.9925
0.0018 0.995
0.0019 0.9975
0.002 1

You might also like