Ultradur B2520

Product Information Ultradur ®
B 2520
09/2011 PBT
Product description
Very easy flowing grade unreinforced injection molding grade for thin-walled parts (e.g. automotive connectors, switches,
relay parts).
Abbreviated designation according to ISO 1043-1: PBT

CLASSIFICATION ACCORDING TO ISO 7792-1:
Molding Compound ISO 7792-PBT, M+H+LGHLN, 11-030
Product safety
Ultradur® melts are stable at temperatures up to 280°C and do not give rise to hazards due to molecular degradation or
the evolution of gases and vapors. Like all thermoplastic polymers, however, Ultradur decomposes on exposure to
excessive thermal stresses, e.g. when it is overheated or as a result of cleaning by burning off. In such cases gaseous
decomposition products are formed. Decomposition accelerates above 350°C small quantities of aldehydes and saturated
and unsaturated hydrocarbons are also formed. When Ultradur® is properly processed and there is adequate suction at
the die no risks to health are to be expected.
Further safety information see safety data sheet of individual product.
Safety data sheet could be ask for at the Ultra-Infopoint under tel: 0621/60-78780 or fax:0621/60-78730.
Physical form and storage

Standard packaging includes the 25-kg-bag and the 1000 kg octabin (octagonal container). Other forms of packaging are
possible subject to agreement. All containers are tightly sealed and should be opened only immediately prior to
processing. Further precautions for preliminary treatment and drying are described in the processing section of the
brochure. The bulk density is about 0,7 to 0,8g/cm³.
Under normal conditions Ultradur can be stored for unlimited periods. Even at elevated temperatures, e.g. 40°C in air, and
under the action of sunlight and weather no decomposition reactions occur.
Ultradur should generally have a moisture content of less than 0,04% when being processed.
In order to ensure reliable production, therefore, pre-drying should generally be the rule and the machine should be loaded
via a closed conveyor system. Appropriate equipment is commercially available. Pre-drying is also for the addition of
batches, e.g. in the case of inhouse pigmentation.
In order to prevent the formation of condensed water, containers stored in unheated rooms must only be opened when
they have attained the temperature prevailing in the processing area. This can possibly take a very long time.
Measturements have shown that the interior of a 25-kg bag originally at 5°C had reached the temperature of 20°C in the
processing area only after 48 hours.
Note
The data contained in this publication are based on our current knowledge and experience. In view of the many factors
that may affect processing and application of our product, these data do not relieve processors from carrying out their own
investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product
for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change
without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the
recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
In order to check the availability of products please contact us or our sales agency.
BASF South East Asia Pte Ltd

7 Temasek Boulevard #35-01, Suntec Tower One, Singapore 038987
Ultradur ® B 2520
Product Information
Typical values for uncoloured product at 23 °C1) Test method2) Unit Values3)
Properties
Polymer abbreviation - - PBT
Density ISO 1183 kg/m³ 1310
Viscosity number (solution 0,005 g/ml Phenole/1,2 Dichlorbenzol 1:1) ISO 307, 1157, 1628 cm³/g 105
natural - - +
Water absorption, equilibrium in water at 23°C similar to ISO 62 % 0.4
Moisture absorption, equilibrium 23°C/50% r.h. similar to ISO 62 % 0.2
Processing
Melt volume-flow rate MVR at 250 °C and 2.16 kg ISO 1133 cm³/10min 55
Melting temperature, DSC ISO 11357-1/-3 °C 223
Melt temperature, Injection moulding/Extrusion - °C 250 - 275
Mould temperature, Injection moulding - °C 60 - 100
Moulding shrinkage, free, longitudinal (plate with film gate 150*150*3 mm³) - % 1.5
Moulding shrinkage, free, transverse (plate with film gate 150*150*3 mm³) - % 1.5
Molding shrinkage (parallel) ISO 2577, 294-4 % 1.50
Molding shrinkage (normal) ISO 2577, 294-4 % 1.50
Flammability
Burning Behav. at 1.6 mm nom. thickn. IEC 60695-11-10 class HB
Burning Behav. at thickness d = 0.8 mm IEC 60695-11-10 class HB
Mechanical properties
Tensile modulus ISO 527-1/-2 MPa 2550
Yield stress, 50 mm/min ISO 527-1/-2 MPa 57
Yield strain, 50 mm/min ISO 527-1/-2 % 4
Charpy unnotched impact strength (23°C) ISO 179/1eU kJ/m² 170
Charpy unnotched impact strength (-30°C) ISO 179/1eU kJ/m² 70
Charpy notched impact strength (23°C) ISO 179/1eA kJ/m² 3.1
Thermal properties
HDT A (1.80 MPa) ISO 75-1/-2 °C 57
HDT B (0.45 MPa) ISO 75-1/-2 °C 140
Max. service temperature (short cycle operation) - °C 200
Temperature index at 50% loss of tensile strength after 20000 h IEC 216 °C 120
Temperature index at 50% loss of tensile strength after 5000 h IEC 216 °C 140
Coefficient of linear thermal expansion, longitudinal (23-80)°C ISO 11359-1/-2 E-6/K 130 - 160
Thermal conductivity DIN 52612-1 W/(m K) 0.27
Specific heat capacity - J/(kg*K) 1500
Electrical properties
Relative permittivity (100Hz) IEC 60250 - 3.3
Relative permittivity (1 MHz) IEC 60250 - 3.3
Dissipation factor (100 Hz) IEC 60250 E-4 13
Dissipation factor (1 MHz) IEC 60250 E-4 200
Volume resistivity IEC 60093 Ohm*m >1E16
Comparative tracking index, CTI, test liquid A IEC 60112 - 500
Comparative tracking index, CTI M, test liquid B IEC 60112 - 450
Footnotes
1) If product name or properties don't state otherwise.
2) Specimens according to CAMPUS.
3) The asterisk symbol '*' signifies inapplicable properties.
BASF South East Asia Pte Ltd

7 Temasek Boulevard #35-01, Suntec Tower One, Singapore 038987

Ultradur B2520

Uploaded by

Copyright:

Available Formats

Ultradur B2520

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ultradur B2520

Uploaded by

Copyright:

Available Formats

Product Information Ultradur ®

Abbreviated designation according to ISO 1043-1: PBT

Physical form and storage

BASF South East Asia Pte Ltd

BASF South East Asia Pte Ltd

You might also like