Manejadora Carrier 40RM-10pd

Product 40RM007-034
40RMQ008-028
Data 40RMS008-034
Packaged Air-Handling Units
50/60 Hz
6 to 30 Nominal Tons (21 to 105 kW)
Carrier’s versatile packaged air-

handling units satisfy design
requirements with:
• Multiposition design for horizontal or
vertical installation without modification
• Standard sloped drain pans and
cleanable insulation treated with
Environmental Protection Agency
(EPA) registered antimicrobial agent
improve indoor air quality
• High-static design meets a wider range
of applications than competitive
packaged air handler lines
• Economizer accessory provides
ventilation air and “free” cooling
• Cooling coils with mechanically bonded
fins provide peak heat transfer
• Hot water coil, steam coil, and electric
heat accessories are available
• Standard factory-installed thermo-
static expansion valves (TXVs) on
40RM; 40RMQ units include TXVs and
check valves for heat pump duty with
40RM007-012, matching 38AQS units
40RMQ008,012
40RMS008-012 • Die-formed galvanized steel casings
provide durability and structural
integrity. Optional paint is available
• Easy installation and maintenance;
removal of one side panel allows
access to serviceable components
Features/Benefits
Easy-to-install and economi-
cal 40RM, 40RMQ, 40RMS
units provide reliable service.
The 40RM Series air-handling units
are the best choice for packaged air
handlers. Model 40RM and 40RMQ
units have direct-expansion coils and
model 40RMS units have chilled water
coils. All models offer excellent fan
performance, a unique combination of
40RM014-034, indoor air quality features, easy installa-
40RMQ016-028 tion, and affordable prices. Their versa-
40RMS014-034 tility and state-of-the-art features will
provide economical performance now
and in the future.
Copyright 2005 Carrier Corporation Form 40RM-10PD

Indoor air quality features Economizer accessory precisely Chilled water coils have 1/2-in.
The unique combination of features in controls the blend of outdoor air and (12.7 mm) diameter copper tubes
the 40RM Series air handlers ensures room air to achieve comfort levels. mechanically bonded to aluminum
that clean, fresh, conditioned air is de- When the outside air enthalpy is suit- sine-wave fins. All coils have non-
livered to the occupied space. able, outside air dampers can fully ferrous headers.
open to provide “free” cooling. Direct expansion (DX) coils are
Cooling coils prevent the build-up of
humidity in the room, even during Rugged dependability designed for use with R-22 refrigerant
part-load conditions. Unit sizes of and have copper tubes mechanically
Die-formed galvanized steel pan-
10 tons and above feature dual-circuit bonded to aluminum sine-wave fins.
els ensure structural integrity under all
face-split coils. Direct-expansion coils include matched,
operating conditions. factory-installed thermostatic expan-
Two-in. (51-mm) disposable fil- Mechanically bonded coil fins pro- sion valves (TXVs) with matching dis-
ters remove dust and airborne parti- vide improved heat transfer. tributor nozzles.
cles from the occupied space.
Galvanized steel fan housings are
Thermal insulation contains an securely mounted to a die-formed gal-
Easier installation and service
immobilized anti-microbial agent to vanized steel deck. The multiposition design and compo-
inhibit the growth of bacteria and nent layout allow for quick unit installa-
fungi. The anti-microbial agent is Rugged pillow-block bearings tion and operation. The DX coils have
(014-034 sizes) are securely fastened
registered with the U.S. Environmental factory-installed TXVs with matching
to the solid steel fan shaft with split col-
Protection Agency (EPA). distributor nozzles. Units can be con-
lets and clamp locking devices. Smaller verted from horizontal to vertical oper-
Pitched drain pan can be adjusted unit sizes have spider-type bearings.
for a right-hand or left-hand connec- ation by simply repositioning the unit.
tion to provide positive drainage and Coil flexibility Drain pan connections are duplicated
prevent standing condensate. Model 40RM and 40RMQ (direct- on both sides of the unit. The
expansion coils) and 40RMS (chilled filters, motor, drive, TXVs, and coil
Accessory economizer can provide
water coil) have galvanized steel cas- connections are easily accessed by
ventilation air to improve indoor air removing a single side panel.
quality. When used with CO2 sensors, ings; inlet and outlet connections are
the economizer admits fresh outdoor air on the same end.
to replace stale, recirculated indoor air.
Accessory UV-C germicidal lamps
can eliminate foul odors that result
from the growth of mold and fungus
on evaporator coil and condensate pan
surfaces.
Economy
The 40RM Series packaged air
handlers have low initial costs, and Table of contents Page
they continue to save money by pro- Features/Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1,2
viding reduced installation expense and Model Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
energy-efficient performance. Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9
Quick installation is ensured by the Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-12
multiposition design. Units can be Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-24
installed in either the horizontal or ver- Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25,26
tical (upflow) configuration without Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-56
modifications. All units have drain-pan Cooling Capacities 40RM with Standard Coil . . . . . . . . . . . . . . . . . . .27-30
connections on both sides, and pans Cooling Capacities 40RM with High-Capacity Coil . . . . . . . . . . . . . . . 31-34
can be pitched for right-hand or left- Cooling Capacities 40RMQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35,36
hand operation with a simple adjust- Hydronic Heating Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
ment. Fan motors and contactors are Fan Performance Data with Standard Coil . . . . . . . . . . . . . . . . . . . . .38-45
pre-wired and TXVs are factory- Fan Performance Data with High-Capacity Coil . . . . . . . . . . . . . . . . .46-54
installed on 40RM and 40RMQ Sound Power Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
models. Pressure Drop and Airflow Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-56
High-efficiency, precision- Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57-63
balanced fans minimize air turbu- Typical Piping and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-66
lence, surging, and unbalanced opera- Typical Control Wiring Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
tion, thereby cutting operating Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68-76
expenses. Guide Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77-79
2
Model number nomenclature
40RM – 016 –– B 5 0 1 GC
40RM — Commercial Packaged Factory-Installed Options

Air Handler GC — Unpainted, Standard Motor and
Standard Drive
Cooling Coil HC — Unpainted, Standard Motor and
- — Direct Expansion Medium-Static Drive (Not available
Q — Direct Expansion for Heat Pump Duty* for 028 size for 60 Hz units and
S — Chilled Water 016-028 for 50 Hz units)
TC — Unpainted, Alternate Motor and
Nominal Capacity — Tons (kW) Medium-Static Drive (Available for
007 — 6 (21) 016 — 15 (52) 50 Hz sizes 016,024,028 and
008 — 7-1/2 (26) 024 — 20 (70) 60 Hz size 028 only)
010 — 8-1/2 (29) 028 — 25 (87) YC — Unpainted, Alternate Motor and
012 — 10 (35) 034 — 30 (105) High-Static Drive†
014 — 12-1/2 (43) ED — Painted, Standard Motor and
Standard Drive
– – — Not Used FD — Painted, Standard Motor and
Medium-Static Drive (Not available
Direct Expansion Coil Option
for 028 size for 60 Hz units and
- — None (40RMS)
016-028 for 50 Hz units)
B — Standard Capacity Coil (40RM, 40RMQ)
RD — Painted, Alternate Motor and
H — High Capacity 4-Row Coil (40RM)
Medium-Static Drive (Available for
50 Hz sizes 016,024,028 and
Voltage Designation (V-Ph-Hz)
60 Hz size 028 only)
1 — 575-3-60
WD — Painted, Alternate Motor and
3 — 208/230-1-60 (007-010 sizes only)
High-Static Drive†
5 — 208/230-3-60 (size 016 YC or WD alternate motor options and
all size 024-034 units)
6 — 208/230/460-3-60 (all sizes 007-014; size 016 with standard
motor options except YC and WD options)
460-3-60 (sizes 016 YC or WD alternate motor options and
all size 024-034 units)
8 — 230-3-50
9 — 400-3-50 Packaging
1 — Standard Domestic
Revision Number 3 — Standard Export
0 — Original Model
*For 40RMQ heat pump system performance information, refer to 38AQ, 38ARQ, 38AQS Product Data catalog.
†YC and WD option codes for all 034 size units and 008, 010 units with 208/230-1-60 power designate
standard motor and high-static drive.
NOTE: See the following table for the sizes available for each unit.
UNIT SIZE AVAILABILITY

UNIT 007 008 010 012 014 016 024 028 034
40RM X X X X X X X X
40RMQ X X X X X
40RMS X X X X X X X X
Quality Assurance
Certified to ISO 9001:2000
3
Physical data
40RM — ENGLISH
UNIT 40RM 007 008 012 014 016 024 028 034
NOMINAL CAPACITY (Tons) 6 71/2 10 121/2 15 20 25 30
OPERATING WEIGHT (lb)
Base Unit with TXV (3 Row/4 Row) 381/399 385/404 405/425 670/695 685/713 690/730 1020/1050 1030/1062
Plenum 175 175 175 225 225 225 325 325
Economizer 185 185 185 340 340 340 340 340
Hot Water Coil 195 195 195 285 285 285 345 345
Steam Coil 215 215 215 340 340 340 405 405
FANS
Qty...Diam. (in.) 1...15 1...15 1...15 2...15 2...15 2...15 2...18 2...18
Nominal Airflow (cfm) 2400 3000 4000 5000 6000 8000 10,000 12,000
Airflow Range (cfm) 1800-3000 2250-3750 3000-5000 3750-6250 4500-7500 6000-10,000 7500-12,500 9000-15,000
Nominal Motor Hp (Standard Motor)*
208/230-1-60 1.3 2.4 — — — — — —
208/230-3-60 and 460-3-60 2.4 2.4 2.4 2.9 3.7 5.0 7.5 10.0
575-3-60 1.0 2.0 2.0 3.0 3.0 5.0 7.5 10.0
230-3-50, 400-3-50 2.4 2.4 2.9 2.9 2.9 5.0 7.5 10.0
Motor Speed (rpm)
208/230-1-60 1725 1725 — — — — — —
208/230-3-60 and 460-3-60 1725 1725 1725 1725 1725 1745 1745 1745
575-3-60 1725 1725 1725 1725 1725 1745 1755 1755
230-3-50, 400-3-50 1425
REFRIGERANT R-22
Operating charge (lb)
(approx per circuit)† 3.0 3.0 1.5/1.5 2.0/2.0 2.5/2.5 3.5/3.5 4.5/4.5 5.0/5.0
DIRECT-EXPANSION COIL Enhanced Copper Tubes, Aluminum Sine-Wave Fins
Max Working Pressure (psig) 435
Face Area (sq ft) 6.67 8.33 10.01 13.25 17.67 19.88 24.86 29.83
No. of Splits 1 1 2 2 2 2 2 2
Split Type...Percentage — — Face...50/50
No. of Circuits per Split (3 Row/4 Row) 12/12 15/15 9/9 9/12 12/16 13/18 15/20 18/24
Fins/in. 15 15 17 15 15 17 15 15
STEAM COIL
Max Working Pressure (psig at 260 F) 20
Total Face Area (sq ft) 6.67 6.67 6.67 13.33 13.33 13.33 15.0 15.0
Rows...Fins/in. 1...9 1...9 1...9 1...10 1...10 1...10 1...10 1...10
HOT WATER COIL
Rows...Fins/in. 2...8.5 2...8.5 2...8.5 2...8.5 2...8.5 2...8.5 2...12.5 2...12.5
Water Volume
(gal) 8.3 13.9 14.3
(ft3) 1.1 1.85 1.90
PIPING CONNECTIONS
Quantity...Size (in.)
DX Coil — Suction (ODF) 1...11/8 1...11/8 2...11/8 2...11/8 2...11/8 2...1 1/8 2...13/8 2...13/8
DX Coil — Liquid Refrigerant (ODF) 1...5/8 2...5/8
Steam Coil, In (MPT) 1...21/2 1...21/2
Steam Coil, Out (MPT) 1...11/2 1...11/2
Hot Water Coil, In (MPT) 1...11/2 1...11/2 1...2
Hot Water Coil, Out (MPT) 1...11/2 1...11/2 1...2
Condensate (PVC) 1...11/4 ODM/1 IDF
FILTERS Throwaway — Factory-Supplied
Quantity...Size (in.) 4...16 x 24 x 2 4...16 x 20 x 2 4...20 x 24 x 2
4...16 x 24 x 2 4...20 x 25 x 2
Access Location Right or Left Side
LEGEND
DX — Direct Expansion
TXV — Thermostatic Expansion Valve
*Refer to alternate Fan Motor Data table, pages 69 and 70, for alternate motor data.
†Units are shipped without refrigerant charge.
4
40RM — SI
UNIT 40RM 007 008 012 014 016 024 028 034
NOMINAL CAPACITY (kW) 21 26 35 43 52 70 87 105
OPERATING WEIGHT (kg)
Base Unit with TXV (3 Row/4 Row) 173/181 175/183 184/193 304/315 311/323 313/331 463/470 467/482
Plenum 80 80 80 102 102 102 148 148
Economizer 84 84 84 155 155 155 205 205
Hot Water Coil 89 89 89 130 130 130 157 157
Steam Coil 98 98 98 155 155 155 184 184
FANS
Qty...Diam. (mm) 1...381 1...381 1...381 2...381 2...381 2...381 2...457 2...457
Nominal Airflow (L/s) 1133 1604 1888 2360 2831 3775 4719 5663
Airflow Range (L/s) 850-1416 1203-2006 1416-2360 1770-2949 2124-3539 2831-4719 3539-5899 4247-7079
Nominal Motor kW (Standard Motor)*
208/230-1-60 0.97 1.79 — — — — — —
208/230-3-60 and 460-3-60 1.79 1.79 1.79 2.16 2.76 3.73 5.59 7.46
575-3-60 0.75 1.49 1.49 2.24 2.24 3.73 5.59 7.46
230-3-50, 400-3-50 1.79 1.79 2.16 2.16 2.16 3.73 5.59 7.46
Motor Speed (r/s)
208/230-1-60 28.8 28.8 — — — — — —
208/230-3-60 and 460-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.1 29.1
575-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.3 29.3
230-3-50, 400-3-50 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8
REFRIGERANT R-22
Operating charge (kg) 1.36 1.36 0.68/0.68 0.90/0.90 1.13/1.13 1.59/1.59 2.04/2.04 2.27/2.27
(approx per circuit)†
Max Working Pressure (kPag) 2999
Face Area (sq m) 0.62 0.77 0.93 1.23 1.64 1.85 2.30 2.77
No. of Splits 1 1 2 2 2 2 2 2
No. of Circuits per Split (3 Row/4 Row) 12/12 15/15 9/9 9/12 12/16 13/18 15/20 18/24
Split Type...Percentage — — Face...50/50
Fins/m 591 591 670 591 591 670 591 591
STEAM COIL
Max Working Pressure (kPag at 126 C) 138
Total Face Area (sq m) 0.62 0.62 0.62 1.24 1.24 1.24 1.39 1.39
Rows...Fins/m 1...355 1...355 1...355 1...394 1...394 1...394 1...394 1...394
HOT WATER COIL
Rows...Fins/m 2...335 2...335 2...335 2...335 2...335 2...335 2...493 2...493
Water Volume
(L) 31.4 52.6 54.1
(m3) 0.031 0.052 0.054
PIPING CONNECTIONS**
DX Coil — Suction (ODF) 1...11/8 1...11/8 2...11/8 2...11/8 2...11/8 2...11/8 2...13/8 2...13/8
DX Coil — Liquid Refrigerant (ODF) 1...5/8 2...5/8
Steam Coil, In (MPT) 1...21/2 1...21/2
Steam Coil, Out (MPT) 1...11/2 1...11/2
Condensate (PVC) 1
1...1 /4 ODM/1 IDF
4...406 x 508 x 51 4...508 x 610 x 51
Quantity...Size 4...406 x 610 x 51 4...406 x 610 x 51 4...508 x 635 x 51
LEGEND
*Refer to Alternate Fan Motor Data table, pages 69 and 70, for alternate motor data.
**All piping sizes are OD inches; equivalent sizes in millimeters follow:
in. mm
5/8 15.9
11 / 8 28.6
13 / 8 34.9
11 / 2 38.7
2 50.8
21 / 2 63.5
5
Physical data (cont)
40RMQ — ENGLISH
UNIT 40RMQ 008 012 016 024 028
NOMINAL CAPACITY (Tons) 71 / 2 10 15 20 25
Base Unit with TXV 385 427 713 720 1050
Plenum 175 175 225 140 180
Economizer 185 185 340 340 450
Hot Water Coil 195 195 285 285 345
Steam Coil 215 215 340 340 405
FANS
Qty...Diam. (in.) 1...15 1...15 2...15 2...15 2...18
Nominal Airflow (cfm) 3000 4000 6000 8000 10,000
Airflow Range (cfm) 2250-3750 3000-5000 4500-7500 6000-10,000 7500-12,500
Nominal Motor Hp (Standard Motor)*
208/230-1-60 2.4 — — — —
208/230-3-60 and 460-3-60 2.4 2.4 3.7 5.0 7.5
575-3-60 2.0 2.0 3.0 5.0 7.5
230-3-50, 400-3-50 2.4 2.9 2.9 5.0 7.5
Motor Speed (rpm)
208/230-1-60 1725 — — — —
208/230-3-60 and 460-3-60 1725 1725 1725 1745 1745
575-3-60 1725 1725 1725 1745 1755
230-3-50, 400-3-50 1425
REFRIGERANT R-22
Operating charge (lb)
(approx per circuit)† 3.0 2.0/2.0 3.0/3.0 3.5/3.5 4.5/4.5

Face Area (sq ft) 8.33 10.01 19.88 19.88 24.86
No. of Splits 1 2 2 2 2
Split Type...Percentage — Face...50/50 Face...50/50 Face...60/40
No. of Circuits per Split 15 9 18 18 24/16
Rows...Fins/in. 3...15 4...15 4...15 4...15 4...15
STEAM COIL
Max Working Pressure (psig at 260 F) 20
Total Face Area (sq ft) 6.67 6.67 13.33 13.33 15.0
Rows...Fins/in. 1...9 1...9 1...10 1...10 1...10
HOT WATER COIL
Total Face Area (sq ft) 6.67 6.67 13.33 13.33 15.0
Rows...Fins/in. 2...8.5 2...8.5 2...8.5 2...8.5 2...12.5
Water Volume
(gal) 8.3 13.9 13.9
(ft3) 1.1 1.85 1.85
PIPING CONNECTIONS
DX Coil — Suction (ODF) 1...11/8 2...11/8 2...11/8 2...1 1/8 2...13/8
DX Coil — Liquid Refrigerant (ODF) 1...5/8 2...5/8 2...5/8 2...5/8 2...5/8
Steam Coil, In (MPT) 1...21/2 1...21/2 1...21/2 1...21/2
Steam Coil, Out (MPT) 1...11/2 1...11/2 1...11/2 1...11/2
Hot Water Coil, In (MPT) 1...11/2 1...11/2 1...2 1...2 1...2
Hot Water Coil, Out (MPT) 1...11/2 1...11/2 1...2 1...2 1...2
4...16 x 20 x 2 4...16 x 20 x 2 4...20 x 24 x 2
Quantity...Size (in.) 4...16 x 24 x 2
4...16 x 24 x 2 4...16 x 24 x 2 4...20 x 25 x 2
LEGEND
6
40RMQ — SI
UNIT 40RMQ 008 012 016 024 028
NOMINAL CAPACITY (kW) 26 35 52 70 87
Base Unit with TXV 175 194 323 326 477
Plenum 80 80 102 44 44
Economizer 84 84 155 155 205
Hot Water Coil 89 89 130 130 157
Steam Coil 98 98 155 155 184
FANS
Qty...Diam. (mm) 1...381 1...381 2...381 2...381 2...457
Nominal Airflow (L/s) 1604 1888 2831 3775 4719
Airflow Range (L/s) 1203-2006 1416-2360 2124-3539 2831-4719 3539-5899
Nominal Motor kW (Standard Motor)*
208/230-1-60 1.79 — — — —
208/230-3-60 and 460-3-60 1.79 1.79 2.76 3.73 5.60
575-3-60 1.49 1.49 2.24 3.73 5.60
230-3-50, 400-3-50 1.79 2.16 2.16 3.73 5.60
Motor Speed (r/s)
208/230-1-60 28.8 — — — —
208/230-3-60 and 460-3-60 28.8 28.8 28.8 29.1 29.1
575-3-60 28.8 28.8 28.8 29.1 29.3
230-3-50, 400-3-50 23.8 23.8 23.8 23.8 23.8
REFRIGERANT R-22
Operating charge (kg) 1.36 0.91/0.91 1.36/1.36 1.59/1.59 2.04/2.04
(approx per circuit)†
Face Area (sq m) 0.77 0.93 1.64 1.85 2.30
No. of Splits 1 2 2 2 2
No. of Circuits per Split 15 9 16 18 24/16
Split Type...Percentage — Face...50/50 Face...60/40
Rows...Fins/m 3...591 4...591 4...591 4...591 4...591
STEAM COIL
Max Working Pressure (kPag at 126 C) 138
Total Face Area (sq m) 0.62 0.62 1.24 1.24 1.39
Rows...Fins/m 1...355 1...355 1...394 1...394 1...394
HOT WATER COIL
Total Face Area (sq m) 0.62 0.62 1.24 1.24 1.39
Rows...Fins/m 2...335 2...335 2...335 2...335 2...493
Water Volume
(L) 31.4 52.6 52.6
(m3) 0.031 0.052 0.052
PIPING CONNECTIONS**
DX Coil — Suction (ODF) 1...11/8 2...11/8 2...11/8 2...1 1/8 2...13/8
DX Coil — Liquid Refrigerant (ODF) 1...5/8 2...5/8 2...5/8 2...5/8 2...5/8
Steam Coil, In (MPT) 1...21/2 1...21/2 1...21/2 1...21/2
Steam Coil, Out (MPT) 1...11/2 1...11/2 1...11/2 1...11/2
Hot Water Coil, In (MPT) 1...11/2 1...11/2 1...2 1...2 1...2
Hot Water Coil, Out (MPT) 1...11/2 1...11/2 1...2 1...2 1...2
4...406 x 508 x 51 4...406 x 610 x 51 4...406 x 610 x 51
Quantity...Size 4...406 x 610 x 51 4...406 x 610 x 51 4...406 x 508 x 51 4...508 x 635 x 51
LEGEND
**All piping sizes are OD inches; equivalent sizes in millimeters follow:
in. mm
5/ 15.9
8
11 / 8 28.6
11 / 4 31.8
11 / 2 38.7
2 50.8
21 / 2 63.5
7
Physical data (cont)
40RMS — ENGLISH
UNIT 40RMS 008 010 012 014 016 024 028 034
NOMINAL CAPACITY (Tons) 71/2 81/ 2 10 121/2 15 20 25 30
Base Unit 390 391 391 661 677 683 1035 1042
Plenum 175 175 175 225 225 225 325 325
Economizer 185 185 185 340 340 340 450 450
Hot Water Coil 195 195 195 285 285 285 345 345
Steam Coil 215 215 215 340 340 340 405 405
FANS
Qty...Diam. (in.) 1...15 1...15 1...15 2...15 2...15 2...15 2...18 2...18
Nominal Airflow (cfm) 3000 3400 4000 5000 6000 8000 10,000 12,000
Airflow Range (cfm) 2250-3750 2250-4250 3000-5000 3750-6250 4500-7500 6000-10,000 7500-12,500 9000-15,000
Nominal Motor Hp
(Standard Motor)*
208/230-1-60 2.4 2.4 — — — — — —
208/230-3-60 and 460-3-60 2.4 2.4 2.4 2.9 3.7 5.0 7.5 10.0
575-3-60 2.0 2.0 2.0 3.0 3.0 5.0 7.5 10.0
230-3-50, 400-3-50 2.4 2.4 2.9 2.9 2.9 5.0 7.5 10.0
Motor Speed (rpm)
208/230-1-60 1725 1725 — — — — — —
208/230-3-60 and 460-3-60 1725 1725 1725 1725 1725 1745 1745 1745
575-3-60 1725 1725 1725 1725 1725 1745 1755 1755
230-3-50, 400-3-50 1425 1425 1425 1425 1425 1425 1425 1425
CHILLED WATER COIL Enhanced Copper Tubes, Aluminum Sine-Wave Fins
Face Area (sq ft) — Upper 8.3 9.0 9.8 8.3 8.3 11.0 12.4 15.5
Face Area (sq ft) — Lower — — — 5.5 8.3 8.3 12.4 12.4
Rows...Fins/in. 3...15
Water Volume
(gal) 3.0 3.3 3.5 4.7 5.6 6.4 8.9 9.9
(ft3) 0.40 0.47 0.46 0.63 0.75 0.85 1.19 1.32
STEAM COIL
Max Working Pressure
(psig at 260 F) 20
Rows...Fins/in. 1...9 1...9 1...9 1...10 1...10 1...10 1...10 1...10
HOT WATER COIL
Max Working Pressure (in. wg) 150
Rows...Fins/in. 2...8.5 2...8.5 2...8.5 2...8.5 2...8.5 2...8.5 2...12.5 2...12.5
Water Volume
(gal) 8.3 13.9 14.3
(ft3) 1.1 1.85 1.90
PIPING CONNECTIONS
Chilled Water — In 1...13/8 ODF 1...13/8 ODF 1...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Chilled Water — Out 1...13/8 ODF 1...13/8 ODF 1...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Steam Coil, In (MPT) 1...21/2 1...21/2 1...21/2
Steam Coil, Out (MPT) 1...11/2 1...11/2 1...11/2
4...16 x 20 x 2 4...20 x 24 x 2
Quantity...Size (in.) 4...16 x 24 x 2
4...16 x 24 x 2 4...20 x 25 x 2
*Refer to the Alternate Fan Motor Data table, pages 69 and 70, for alternate motor data.
8
40RMS — SI
UNIT 40RMS 008 010 012 014 016 024 028 034
NOMINAL CAPACITY (kW) 26 29 35 43 52 70 87 105
Base Unit 177 177 177 300 307 310 469 473
Plenum 80 80 80 102 102 102 148 148
Economizer 84 84 84 155 155 130 205 205
Hot Water Coil 89 89 89 130 130 130 157 157
Steam Coil 98 98 98 155 155 155 184 184
FANS
Qty...Diam. (mm) 1...381 1...381 1...381 2...381 2...381 2...381 2...457 2...457
Nominal Airflow (L/s) 1416 1605 1888 2360 2831 3775 4719 5663
Airflow Range (L/s) 1062-1770 1204-2006 1416-2360 1770-2949 2124-3539 2831-4719 3539-5899 4247-7079
Nominal Motor kW
(Standard Motor)*
208/230-1-60 1.79 1.79 — — — — — —
208/230-3-60,460-3-60 1.79 1.79 1.79 2.16 2.76 3.73 5.59 7.46
575-3-60 1.49 1.49 1.49 2.24 2.24 3.73 5.59 7.46
230-3-50, 400-3-50 1.79 1.79 2.16 2.16 2.16 3.73 5.59 7.46
Motor Speed (r/s)
208/230-1-60 28.8 28.8 — — — — — —
208/230-3-60, 460-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.1 29.1
575-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.3 29.3
230-3-50, 400-3-50 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8
CHILLED WATER COIL
2999
(kPag)
Face Area (sq m) — Upper 0.77 0.84 0.91 0.77 0.77 1.02 1.15 1.44
Face Area (sq m) — Lower — — — 0.51 0.77 0.77 1.15 1.15
Rows...Fins/m 3...591 3...591 3...591 3...591 3...591 3...591 3...591 3...591
Water Volume
(L) 11.4 12.5 13.2 17.8 21.2 24.2 33.7 37.5
(m3) 0.011 0.013 0.013 0.018 0.021 0.024 0.032 0.037
STEAM COIL
(kPag at 126 C) 138
Rows...Fins/m 1...355 1...355 1...355 1...355 1...394 1...394 1...394 1...394
HOT WATER COIL
1034
(kPag)
Rows...Fins/m 2...335 2...335 2...335 2...335 2...335 2...335 2...493 2...493
Water Volume
(L) 31.4 52.6 54.1
(m3) 0.031 0.052 0.054
PIPING CONNECTIONS†
Chilled Water — In 1...13/8 ODF 1...13/8 ODF 2...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Chilled Water — Out 1...13/8 ODF 1...13/8 ODF 2...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Steam Coil, In (MPT) 1...21/2 1...21/2 1...21/2
Steam Coil, Out (MPT) 1...11/2 1...11/2 1...11/2
4...406 x 508 x 51 4...508 x 610 x 51
Quantity...Size (mm) 4...406 x 610 x 51
4...406 x 610 x 51 4...508 x 635 x 51
†All piping sizes are OD inches; equivalent sizes in millimeters follow:
in. mm
13 / 8 34.9
11 / 2 38.7
2 50.8
21 / 8 54.0
21 / 2 63.5
9
Options and accessories
40RM OPTIONS AND ACCESSORIES humidity are suitable. It can also be used with CO2 sensors
to help meet indoor air quality requirements.
ITEM OPTION* ACCESSORY†
Discharge plenum directs the air discharge directly into
Alternate Fan Motors X
the occupied space; integral horizontal and vertical
Alternate Drives X
louvers enable redirection of airflow. Accessory is available
CO2 Sensors X
unpainted or painted. Field assembly is required (only
Condensate Drain Trap X
applicable for vertical application).
Discharge Plenum X
Economizer X Return-air grille provides a protective barrier over the
Electric Heat X return-air opening and gives a finished appearance to
Evaporator Coils X units installed in the occupied space. Accessory is available
Hot Water Heating Coils X unpainted or painted.
Overhead Suspension Package X Subbase provides a stable, raised platform and room for
PremierLink™ Controller X condensate drain trap connection for vertical floor-mounted
Prepainted Units X units. Accessory is available unpainted or painted.
Programmable Thermostats X Overhead suspension package includes necessary
Return Air Grille X brackets to support units in horizontal ceiling installations.
Steam Heating Coil X
Subbase X
CO2 sensors can be used in conjunction with the econo-
UV-C Germicidal Lamp X
mizer accessory to help meet indoor air quality require-
ments. The sensor signals the economizer to open when
*Factory-installed option. the CO2 level in the space exceeds the set point. A Carrier
†Field-installed accessory.
Comfort System programmable thermostat can be used to
Factory-installed options override the sensor if the outside-air temperature is too
high or too low.
Alternate fan motors and drives are available to pro-
vide the widest possible range of performance. Carrier’s line of thermostats provide both programma-
ble and non-programmable capability with the new
High-capacity 4-row coils are available to provide in- Debonair® line of commercial programmable thermostats.
creased latent and sensible capacities (40RM only). The TEMP System controls offer communication capability
Prepainted steel units are available from the factory for with staged heating and cooling, and the Commercial
applications that require painted units. Units are painted Electronic thermostats provide 7-day programmable
with American Sterling Gray color. capability for economical applications.
Field-installed accessories Condensate drain trap includes an overflow shutoff
switch that can be wired to turn off the unit if the trap
Two-row hot water coils have copper tubes mechani-
becomes plugged. Kit also includes a wire harness that can
cally bonded to aluminum plate fins and non-ferrous
headers. be connected to an alarm if desired. The transparent trap
is designed for easy service and maintenance.
One-row steam coil has copper tubes and aluminum
UV-C germicidal lamps inhibit the growth of mold and
fins. The Inner Distributing Tube (IDT) design provides
uniform temperatures across the coil face. The steam coil fungus, which may grow on evaporator coil and conden-
sate pan surfaces. The use of UV-C germicidal lamps re-
has a broad operating pressure range; up to 20 psi
duces the foul odors that may result from this growth of
(138 kPag) at 260 F (126 C). The IDT steam coils are
especially suited to applications where sub-freezing air mold and fungus. It also provides a self-cleaning function
for the evaporator coil and drain pan.
enters the unit.
PremierLink™ controller is a system control compatible
Electric resistance heat coils have an open-wire design
and are mounted in a rigid frame. Safety cutouts for high with the Carrier Comfort Network® (CCN) system and
other building automation systems. This control allows
temperature conditions are standard. Terminal block for
users access to and the ability to change factory-defined
single-point power connection is included.
settings, thus expanding the function of the standard unit.
Economizer (enthalpy controlled) provides ventilation
air and “free” cooling if outside ambient temperature and
10
CARRIER THERMOSTATS
DEBONAIR® COMMERCIAL PROGRAMMABLE COMMERCIAL ELECTRONIC
THERMOSTAT THERMOSTAT
Carrier
®
Pm
COOL
AUTO
HEAT
PREMIERLINK™ COMMUNICATING CONTROLS
11
Options and accessories (cont)
40RM WITH DISCHARGE PLENUM, 40RM WITH HOT WATER OR STEAM COIL
RETURN-AIR GRILLE AND SUBBASE
HOT WATER OR
STEAM COIL
DISCHARGE
PLENUM
RETURN-AIR
GRILLE
SUBBASE
FAN
COIL
UNIT FAN COIL
UNIT
40RM WITH ECONOMIZER

AND UV-C GERMICIDAL LAMPS 40RM WITH CONDENSATE TRAP
ECONOMIZER
UV-C GERMICIDAL LAMPS
12
Dimensions
40RM007-012
40RMQ008-012
40RMS008-012
UNIT WEIGHT
UNIT
lb (kg)
40RM007 381 (173)
40RM008 385 (175)
40RM012 405 (184)
40RM007 4 ROW 399 (181)
40RM008 4 ROW 404 (184)
40RM012 4 ROW 425 (193)
40RMQ008 385 (175)
40RMQ012 427 (194)
40RMS008 390 (177)
40RMS010 391 (177)
40RMS012 391 (177)
LEGEND
NOTES:
1. Dimensions in [ ] are in millimeters.
2. Direction of airflow.
3. Recommended clearance:
• Rear: 3″ (76.2 mm) (2′-6″ [762 mm]
with electric heat accessory)
• Front: 2′-6″ (762 mm)
• Right side: 3′-6″ (1067 mm)
• Left Side: 2′-6″ (762 mm)
• Local codes or jurisdiction may
prevail.
4. Liquid piping is not supplied by
Carrier.
5. Duct flange is factory-supplied and
field-installed.
13
Dimensions (cont)
40RM014-024
40RMQ016,024
40RMS014-024
LEGEND
NOTES:
• Rear: 3″ (76.2 mm) (2′-6″ [762 mm]
• Front: 2′-6″ (762 mm)
• Right side: 3′-6″ (1067 mm)
• Left Side: 2′-6″ (762 mm)
• Local codes or jurisdiction may prevail.
4. Liquid piping is not supplied by Carrier.
5. Duct flange is factory-supplied and field-
installed.
UNIT WEIGHT
UNIT
lb (kg)
40RM014 670 (304)
40RM016 685 (311)
40RM024 690 (313)
40RM014 4 ROW 695 (315)
40RM016 4 ROW 713 (323)
40RM024 4 ROW 730 (331)
40RMQ016 713 (323)
40RMQ024 720 (326)
40RMS014 661 (300)
40RMS016 677 (307)
40RMS024 683 (310)
14
40RM028,034
40RMQ028
40RMS028,034
LEGEND
NOTES:
• Rear: 3″ (76.2 mm) (2′-6″ [762 mm]
• Front: 2′-6″ (762 mm)
• Right side: 3′-6″ (1067 mm)
• Left Side: 2′-6″ (762 mm)
• Local codes or jurisdiction may prevail.
4. Liquid piping is not supplied by Carrier.
5. Duct flange is factory-supplied and field-
installed.
UNIT UNIT WEIGHT

lb (kg)
40RM028 1020 (463)
40RM034 1030 (467)
40RM028 4 ROW 1050 (470)
40RM034 4 ROW 1062 (482)
40RMQ028 1050 (477)
40RMS028 1035 (469)
40RMS034 1042 (473)
15
Dimensions (cont)
CORNER WEIGHTS
HORIZONTAL POSITION
6 4 3 8
Fan Coil
Fan
5 1 2 7
Steam Coil or Base Unit Fan Coil Economizer

Hot Water Coil
ENGLISH
UNIT OR CORNER NUMBER (WEIGHT IN LB)

40RM,RMS,RMQ UNIT OR ACCESSORY ACCESSORY
UNIT SIZE NAME WEIGHT 1 2 3 4 5 6 7 8
(lb)
FAN COIL BASE UNIT 394 108.0 104.7 89.4 92.2 — — — —
STEAM COIL ADD 137 25.6 0.0 0.0 25.9 42.4 43.0 0.0 0.0
007,008, HOT WATER COIL ADD 143 26.3 0.0 0.0 26.9 44.3 45.5 0.0 0.0
010, 012 ECONOMIZER ADD 128 0.0 25.5 24.7 0.0 0.0 0.0 39.3 38.1
ECO + STEAM COIL ADD 264 25.6 25.5 24.7 25.9 42.4 43.0 39.3 38.1
ECO + HW COIL ADD 271 26.3 25.5 24.7 26.9 44.3 45.5 39.3 38.1
STEAM COIL ADD 239 43.2 0.0 0.0 43.6 75.8 76.5 0.0 0.0
024 ECONOMIZER ADD 217 0.0 42.7 39.6 0.0 0.0 0.0 70.1 65.1
ECO + HW COIL ADD 463 44.5 42.7 39.6 44.1 78.7 77.9 70.1 65.1
STEAM COIL ADD 263 47.5 0.0 0.0 47.9 83.7 84.4 0.0 0.0
HOT WATER COIL ADD 314 54.6 0.0 0.0 54.8 101.9 102.3 0.0 0.0
028, 034
ECONOMIZER ADD 306 0.0 61.3 56.4 0.0 0.0 0.0 98.3 90.5
ECO + HW COIL ADD 620 54.6 61.3 56.4 54.8 101.9 102.3 98.3 90.5
SI
UNIT OR CORNER NUMBER (WEIGHT IN KG)

UNIT SIZE NAME WEIGHT 1 2 3 4 5 6 7 8
(kg)
STEAM COIL ADD 62 11.6 0.0 0.0 11.7 19.2 19.5 0.0 0.0
010, 012 ECONOMIZER ADD 58 0.0 11.6 11.2 0.0 0.0 0.0 17.8 17.3
ECO + HW COIL ADD 123 11.9 11.6 11.2 12.2 20.1 20.6 17.8 17.3
STEAM COIL ADD 108 19.6 0.0 0.0 19.8 34.4 34.7 0.0 0.0
024 ECONOMIZER ADD 98 0.0 19.4 18.0 0.0 0.0 0.0 31.8 29.5
ECO + HW COIL ADD 210 20.2 19.4 18.0 20.0 35.7 35.3 31.8 29.5
STEAM COIL ADD 119 21.5 0.0 0.0 21.7 38.0 38.3 0.0 0.0
HOT WATER COIL ADD 142 24.8 0.0 0.0 24.9 46.2 46.4 0.0 0.0
028, 034
ECONOMIZER ADD 139 0.0 27.8 25.6 0.0 0.0 0.0 44.6 41.0
ECO + HW COIL ADD 281 24.8 27.8 25.6 24.9 46.2 46.4 44.6 41.0
LEGEND
ECO — Economizer
HW — Hot Water
16
CORNER WEIGHTS
VERTICAL POSITION
5 6
Economizer
1 4
Mtr
Base Unit
2 3
NOTE: Steam, Hot Water & Plenum

Vertical Position
on top of positions 1,2,3,4
ENGLISH
UNIT OR CORNER NUMBER (WEIGHT IN LB)
UNIT SIZE NAME WEIGHT 1 2 3 4 5 6
(lb)
FAN COIL BASE UNIT 394 99.3 113.5 96.8 84.7 — —
STEAM COIL ADD 137 34.5 34.5 34.0 34.0 0.0 0.0
HOT WATER COIL ADD 143 36.2 36.2 35.3 35.3 0.0 0.0
007,008,
010, 012 PLENUM ADD 175 50.8 36.7 36.7 50.8 0.0 0.0
ECONOMIZER ADD 128 25.5 0.0 0.0 24.7 39.3 38.1
ECO + STEAM COIL ADD 264 59.9 34.5 34.0 58.7 39.3 38.1
ECO + HW COIL ADD 271 61.7 36.2 35.3 60.0 39.3 38.1
STEAM COIL ADD 239 60.0 60.0 59.5 59.5 0.0 0.0
014,016,
024 PLENUM ADD 225 72.5 40.0 40.0 72.5 0.0 0.0
ECONOMIZER ADD 217 42.7 0.0 0.0 39.6 70.1 65.1
ECO + HW COIL ADD 463 103.7 61.0 61.6 101.2 70.1 65.1
STEAM COIL ADD 263 66.1 66.1 65.0 65.6 0.0 0.0
028, 034 ECONOMIZER ADD 325 102.0 60.6 60.6 102.0 0.0 0.0
PLENUM ADD 306 61.3 0.0 0.0 56.4 98.3 90.5
ECO + HW COIL ADD 620 139.8 78.6 78.2 134.6 98.3 90.5
SI
UNIT OR CORNER NUMBER (WEIGHT IN KG)

UNIT SIZE NAME WEIGHT 1 2 3 4 5 6
(kg)
STEAM COIL ADD 62 15.6 15.6 15.4 15.4 0.0 0.0
007,008,
ECONOMIZER ADD 79 23.0 16.6 16.6 23.0 0.0 0.0
010, 012
PLENUM ADD 58 11.6 0.0 0.0 11.2 17.8 17.3
ECO + HW COIL ADD 123 28.0 16.4 16.0 27.2 17.8 17.3
STEAM COIL ADD 108 27.2 27.2 27.0 27.0 0.0 0.0
014,016,
ECONOMIZER ADD 102 32.9 18.1 18.1 32.9 0.0 0.0
024
PLENUM ADD 98 19.4 0.0 0.0 18.0 31.8 29.5
ECO + HW COIL ADD 210 47.0 27.7 27.9 45.9 31.8 29.5
STEAM COIL ADD 119 30.0 30.0 29.5 29.7 0.0 0.0
028, 034 PLENUM ADD 147 46.3 27.5 27.5 46.3 0.0 0.0
ECONOMIZER ADD 139 27.8 0.0 0.0 25.6 44.6 41.0
ECO + HW COIL ADD 281 63.4 35.6 35.5 61.0 44.6 41.0
LEGEND
ECO — Economizer
HW — Hot Water
17
Dimensions (cont)
OVERHEAD SUSPENSION ACCESSORY
UNIT SIZES 007-012

(FRONT)
UNIT SIZES 014-024

(FRONT)
UNIT SIZES 028,034

(FRONT)
NOTE: Dimensions in [ ] are millimeters.
18
PLENUM, RETURN-AIR GRILLE, AND SUBBASE ACCESSORIES
UNIT SIZES 007-012
UNIT SIZES 014-024
19
Dimensions (cont)
PLENUM, RETURN-AIR GRILLE, AND SUBBASE ACCESSORIES (cont)
UNIT SIZES 028,034
20
HOT WATER AND STEAM COIL ACCESSORIES
UNIT SIZES 007-012
DIMENSION HOT WATER COIL STEAM COIL

A 11/2″ MPT [38.1] 11/2″ MPT [38.1]
B 11/2″ MPT [38.1] 21/2″ MPT [63.5]
C 23/8″ [60.3] 31/8″ [79.4]
D 47/8″ [123.8] 31/8″ [79.4]
E 21/8″ [54.0] 49/16″ [115.8]
F 1′-111/4″ [590.6] 1′-9″ [584.2]
G 3′- 4″ [1016.0] 3′-4″ [1016.0]
UNIT SIZES 014-024

A 2″ MPT [50.8] 11/2″ MPT [38.1]
B 2″ MPT [50.8] 21/2″ MPT [63.5]
C 23/8″ [60.3] 31/8″ [79.4]
D 47/8″ [123.8] 31/8″ [79.4]
E 21/8″ [54.0] 49/16″ [115.8]
F 1′-111/4″ [590.6] 1′-9″ [584.2]
NOTE: Dimensions in [ ] are millimeters. G 6′- 8″ [2032.0] 6′-8″ [2032.0]
21
Dimensions (cont)
HOT WATER AND STEAM COIL ACCESSORIES (cont)
UNIT SIZES 028,034

A 2″ MPT [50.8] 11/2″ MPT [38.1]
B 2″ MPT [50.8] 21/2″ MPT [63.5]
C 23/8″ [60.3] 31/8″ [79.4]
D 47/8″ [123.8] 31/8″ [79.4]
E 21/8″ [54.0] 49/16″ [115.8]
F 1′-111/4″ [590.6] 1′-9″ [584.2]
G 7′- 6″ [2286.0] 7′-6″ [2286.0]
22
ECONOMIZER ACCESSORY
UNIT SIZES 007-012
UNIT SIZES 014-024
UNIT SIZES 028,034
NOTE:
1. For horizontal unit applications, economizer can be attached to end of unit opposite duct connections.
2. Dimensions in [ ] are millimeters.
23
Dimensions (cont)
ELECTRIC HEAT ACCESSORY
UNIT SIZES 007-012
UNIT SIZES 014-034
UNIT SIZE A B C D E F G H J
014-024 1′-31/4″ 4′-63/8″ 25/16″ 2′-11/4″ 105/8″ 1′-4″ 1′-45/16″ 1′-63/4″ 1-7/8″
[387.4] [1381.1] [58.7] [641.4] [269.9] [406.4] [414.3] [476.3] [327.0]
1′-33/8″ 5′-47/16″ 21/16″ 2′-63/16″ 1′-1/4″ 1′-7″ 1′-45/16″ 1′-10″ 1′-47/16″
028,034
[390.5] [1636.8] [26.9] [766.8] [311.2] [482.6] [414.0] [558.8] [417.1]
24
Selection procedure (with example) — English
(60 Hz)
Cooling (DX) Fan
I Determine the cooling load and temperature I Determine fan speed and brake horsepower:
and quantity of air entering the evaporator. From the Accessory Pressure Drop table, read a loss of
Given: 0.23 in. wg for a hot water coil at 6000 cfm.
Total Capacity . . . . . . . . . . . . . . . . . .200,000 Btuh External static pressure = 0.80 + 0.23
Sensible Heat Capacity . . . . . . . . . . . .130,000 Btuh = 1.03 in. wg
Air Temperature Entering Indoor Enter 40RM016 Fan Performance table at 6000 cfm
Coil . . . . . . . . . . . . . . . . . . . . . 80 F db, 67 F wb and 1.03 in. wg. Interpolate and determine fan speed
of 864 rpm and 3.1 bhp.
Air Quantity Entering Indoor Coil . . . . . . . . 6000 cfm
II Determine motor and drive.
Ductwork Static Pressure Loss . . . . . . . . . .0.8 in. wg
Enter the fan motor data tables on page 69, and find
Power Supply . . . . . . . . . . . . . . . . . . . . . . 230-3-60
that the 230 v standard motor for a 40RM016 unit
II Determine unit selection and coil refrigerant is rated at 3.7 Hp. Since the bhp required is 3.1, a
temperature. standard motor satisfies the requirement and should be
Enter the Cooling Capacities table at 6000 cfm. Select used.
a 40RM016 unit which has a total capacity of Next, find the type of drive that satisfies the 864 rpm
207,000 and 174,000 Btuh at 40 and 45 F coil refrig- requirement in the Drive Data tables on pages 71-73.
erant temperature, respectively. By interpolation, coil For a 40RM016 unit, the Medium-Static Drive table on
refrigerant temperature of 41.1 F is needed to give a page 71 shows an rpm range of 742 to 943. Since the
total capacity of 200,000 Btuh. Sensible capacity is rpm required is 864, the medium-static drive satisfies
approximately 149,000 Btuh. Cooling load is satisfied. the requirement and should be used. Select the
Heating (Hot Water Coil) standard motor and medium-static drive combination
(option code HC or FD).
I Determine heating load and temperature of air
entering the indoor coil. To select an outdoor unit for this 40RM016 indoor
section, refer to the Combination Rating sheets for
Given: Carrier condensing units in the condensing unit Prod-
Load . . . . . . . . . . . . . . . . . . . . . . . . .425,000 Btuh uct Data Digest, or consult the Carrier Electronic
Entering-Air Temperature . . . . . . . . . . . . . . . . .70 F Catalog.
Coils . . . . . . . . . . . . . . . . . . . . . . 2-Row Hot Water Cooling (Chilled Water)
Coil Entering-Water Temperature . . . . . . . . . . .200 F NOTE: Chilled water coils (40RMS) can be selected by us-
Water Temperature Drop. . . . . . . . . . . . . . . . . .20 F ing Carrier’s Electronic Catalog software program.
II Find the heating capacity.
Enter Hydronic Heating Capacities table for the
40RM016 unit at 6000 cfm. A 2-row hot water coil
delivers 471,000 Btuh (based on 60 F entering air
temperature and 20 F water temperature drop). Since
existing entering air temperature is 70 F, enter the
Heating Correction Factors table for hot water coils at
200 F entering water temperature, 20 F water temper-
ature drop and 70 F entering air. Read a constant of
0.93.
471,000 x 0.93 = 438,000
The 438,000 Btuh rating satisfies the heating load.
25
Selection procedure (with example) — SI (50 Hz)
Cooling (DX) Fan
I Determine the cooling load and temperature I Determine fan speed and brake horsepower.
and quantity of air entering the evaporator. From the Accessory Pressure Drop table, read a loss of
Given: 93 Pa for a hot water coil at 1900 L/s.
Total Capacity . . . . . . . . . . . . . . . . . . . . . . . 37 kW External static pressure = 200 + 93
Sensible Heat Capacity . . . . . . . . . . . . . . . . . 29 kW = 293 Pa
Air Temp Entering Enter 40RM012 Fan Performance table at 1890 L/s
Indoor Coil . . . . . . . . . . . . . . 26.7 C db, 19 C wb and 293 Pa. Interpolate and determine fan speed of
16.47 r/s and 1.90 kW.
Air Quantity Entering Indoor Coil . . . . . . . . 1900 L/s
II Determine motor and drive.
Ductwork Static Pressure Loss. . . . . . . . . . . .200 Pa
Enter the Fan Motor Data tables on page 70, and find
II Determine unit selection and coil refrigerant
that the standard motor for a 40RM012 unit is rated at
temperature. 2.16 kW. Since the kW required is 1.90, a standard
Enter the Cooling Capacities table at 1900 L/s. Select motor does satisfy the requirement.
a 40RM012 unit which has a total capacity of
Next, find the type of drive that satisfies the 16.47 r/s
37.35 kW at 6 C coil refrigerant temperature. Sensible
requirement in the Drive Data tables on pages 74-76.
capacity is 29.61 kW. Cooling load is satisfied. For a 40RM012 unit, the Medium-Static Drive table on
Heating (Hot Water Coil) page 76 shows an r/s range of 13.5 to 17.4. Since
I Determine heating load and temperature of air the r/s required is 16.47, the medium-static drive satis-
entering the indoor coil. fies the requirement and should be used. Select the
standard motor and medium-static drive combination.
Given:
To select an outdoor unit for this 40RM012 indoor
Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 kW section, refer to the Combination Rating sheets for
Entering-Air Temperature . . . . . . . . . . . . . . . 15.6 C Carrier condensing units in the condensing unit Prod-
Coils . . . . . . . . . . . . . . . . . . . . . . 2-Row Hot Water uct Data Digest, or consult the latest Carrier Electronic
Catalog.
Coil Entering-Water Temperature . . . . . . . . . . 93.3 C
Water Temperature Drop. . . . . . . . . . . . . . . . 11.1 C Cooling (Chilled Water)
II Find the heating capacity. NOTE: Select chilled water coils (40RMS) by using
Carrier’s Electronic Catalog software program.
Enter Hydronic Heating Capacities table for the
40RM012 unit at 1900 L/s. A 2-row hot water coil
delivers 90 kW (based on 15.6 C entering air tempera-
ture and 11.1 C water temperature drop).
The 90 kW rating satisfies the heating load.
26
Performance data
40RM WITH STANDARD COIL COOLING CAPACITIES — ENGLISH
EVAPORATOR
UNIT COIL REFRIGERANT TEMP (F)
AIR
40RM
(Standard Airflow Ewb
30 35 40 45 50
3-Row Coil) (Cfm)
(F) TC SHC TC SHC TC SHC TC SHC TC SHC
BF
72 116 55 104 50 93 46 79 40 64 35
1,800
67 96 61 85 56 74 50 61 45 47 40
0.06
62 80 66 69 61 57 55 46 46 39 39
72 135 65 121 60 108 54 92 48 75 42
2,400
007 67 112 73 99 68 86 62 71 56 55 49
0.10
62 94 81 81 75 67 67 56 56 47 47
72 150 73 135 68 120 62 102 56 83 49
3,000
67 125 85 112 78 96 71 80 65 61 57
0.12
62 105 95 90 86 75 75 64 64 54 54
72 144 69 130 63 116 57 99 50 80 43
2,250
67 120 76 106 70 92 63 76 56 59 50
0.06
62 100 83 87 76 71 69 57 57 49 49
72 169 81 151 75 135 68 114 61 94 53
3,000
008 67 140 92 124 85 108 77 89 69 69 62
0.10
62 118 101 102 94 84 84 70 70 59 59
72 187 92 168 85 150 78 127 70 104 61
3,750
67 157 106 140 97 120 89 100 81 77 72
0.12
62 132 118 112 108 94 94 80 80 68 68
72 193 92 174 81 154 76 132 67 108 58
3,000
67 161 102 143 93 123 85 102 76 79 67
0.05
62 134 111 116 102 96 93 78 78 66 66
72 223 108 201 99 179 91 153 81 125 71
012 4,000
67 186 122 166 113 143 104 119 93 92 82
0.07
62 157 136 136 126 113 113 95 95 80 80
72 246 122 222 112 198 103 169 93 138 81
5,000
67 207 140 185 131 159 120 132 109 102 97
0.12
62 175 159 149 145 126 126 109 109 92 92
72 223 107 204 99 183 91 157 81 127 70
3,750
67 188 121 169 112 144 102 118 90 94 81
0.06
62 154 133 136 123 114 111 94 94 80 80
72 259 126 234 117 210 108 180 97 145 85
5,000
014 67 220 146 194 136 166 124 138 112 110 100
0.08
62 178 163 156 150 134 134 114 114 97 97
72 284 142 257 132 230 122 198 111 160 98
6,250
0.10 67 242 166 209 154 183 145 153 131 119 117
62 197 188 172 172 150 150 130 130 111 111
72 282 134 254 123 228 112 194 100 162 89
4,500
67 233 149 209 138 178 125 149 112 117 99
0.03
62 192 163 169 151 141 138 116 116 98 98
72 320 156 293 145 263 134 223 119 179 104
6,000
016 67 276 181 243 167 207 153 174 137 137 123
0.05
62 225 200 198 185 167 167 140 140 119 119
72 358 177 319 163 290 152 248 137 197 120
7,500
67 305 208 263 192 229 178 193 160 153 144
0.08
62 251 232 218 215 188 188 161 161 136 136
72 365 174 330 161 296 147 254 131 206 114
6,000
67 309 198 274 182 234 166 195 150 153 132
0.03
62 250 216 221 200 186 182 155 155 132 132
72 416 203 378 189 338 174 291 157 235 138
8,000
024 67 354 237 305 217 269 202 224 183 179 163
0.06
62 290 264 253 245 218 218 187 187 159 159
72 454 228 413 213 373 198 319 179 259 160
10,000
0.07 67 376 266 338 251 296 235 250 214 194 189
62 316 303 279 278 244 244 213 213 182 182
See Legend and Notes on page 28.
27
Performance data (cont)
40RM WITH STANDARD COIL COOLING CAPACITIES — ENGLISH (cont)
EVAPORATOR
AIR
40RM
(Standard Airflow 30 35 40 45 50
(Cfm) Ewb
3-Row Coil) (F) TC SHC TC SHC TC SHC TC SHC TC SHC
BF
72 440 211 394 193 361 180 312 162 255 142
7,500
67 374 241 385 225 287 205 235 184 191 166
0.04
62 303 265 270 247 229 226 193 193 165 165
72 498 246 454 229 408 212 354 193 288 170
10,000
028 67 425 288 373 267 327 249 271 226 220 203
0.06
62 350 325 306 302 267 267 232 232 199 199
72 — — 495 258 445 240 385 220 318 198
12,500
67 456 327 408 308 359 289 304 265 239 235
0.08
62 380 375 336 336 299 299 264 264 226 226
72 527 253 473 232 433 216 375 194 306 170
9,000 67 449 290 402 270 345 246 282 221 229 199
0.04
62 364 318 323 297 275 271 232 232 198 198
72 598 295 545 275 490 254 425 232 346 205
12,000
034 67 510 346 448 321 393 298 326 271 263 244
0.06
62 420 390 367 362 321 321 279 279 238 238
72 — — 594 309 534 288 462 264 382 237
15,000
67 547 392 490 370 431 347 365 318 287 282
0.08
62 456 450 403 403 359 359 317 317 271 271
LEGEND 6. SHC is based on 80 F db temperature of air entering evaporator
BF — Bypass Factor coil. Below 80 F db, subtract (corr factor x cfm) from SHC.
db — Dry-Bulb Temp (F) Above 80 F db, add (corr factor x cfm) to SHC. See italic type
Ewb — Entering Wet-Bulb Temp (F) below.
lwb — Leaving Wet-Bulb Temp (F)
SHC — Sensible Heat Capacity (1000 Btuh) ENTERING AIR DRY-BULB TEMP (F)
TC — Total Capacity (1000 Btuh) 79 78 77 76 75 Under 75
BYPASS
NOTES: FACTOR 81 82 83 84 85 Over 85
1. Ratings based on approximately 15 F superheat leaving coil. Correction Factor
2. Direct interpolation is permissible. Do not extrapolate.
3. Dashes indicate coil loading limits are exceeded. 0.02 1.08 2.16 3.23 4.31 5.39
4. Evaporator fan heat not deducted from ratings. 0.05 1.05 2.09 3.14 4.18 5.23
5. Formulas: 0.10 0.99 1.98 2.97 3.96 4.95 use formula
0.15 0.94 1.87 2.81 3.74 4.68 shown below
sensible heat capacity (Btuh) 0.20 0.88 1.76 2.64 3.52 4.40
Leaving db = entering db –
1.1 x cfm 0.25 0.83 1.65 2.48 3.30 4.13
Leaving wb = wet-bulb temperature corresponding to enthalpy 0.30 0.77 1.54 2.31 3.08 3.85
of air leaving coil (hlwb) Interpolation is permissible.
total capacity (Btuh) Correction Factor = 1.1 x (1 – BF) x (db – 80)
hlwb = hewb –
4.5 x cfm
where hewb = enthalpy of air entering coil
28
40RM WITH STANDARD COIL COOLING CAPACITIES — SI
EVAPORATOR
UNIT COIL REFRIGERANT TEMP (C)
AIR
40RM
(Standard Airflow Ewb –1 0 2 4 6 8 10
3-Row Coil) (L/s)
(C) TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
BF
22 33.73 16.27 32.43 15.75 29.83 14.69 27.23 13.64 24.62 12.60 22.02 11.57 19.40 10.57
850
19 27.79 18.51 26.56 17.93 24.10 16.78 21.64 15.63 19.17 14.51 16.70 13.41 14.22 12.41
.06
16 22.73 21.09 21.58 20.29 19.27 18.70 16.95 16.95 14.62 14.62 12.28 12.28 9.93 9.93
22 39.24 19.50 37.73 18.87 34.70 17.60 31.68 16.34 28.66 15.09 25.63 13.89 22.60 12.66
1150
007 19 32.37 22.21 30.93 21.58 28.06 20.32 25.18 19.08 22.30 17.86 19.41 16.79 16.51 15.64
.10
16 26.41 25.86 25.15 24.85 22.64 22.64 20.11 20.11 17.58 17.58 15.04 15.04 12.49 12.49
22 43.88 21.85 42.16 21.22 38.71 19.97 35.26 18.72 31.82 17.50 28.37 16.33 24.92 23.63
1450
19 36.69 25.31 35.04 24.63 31.74 23.30 28.44 21.99 25.14 20.73 21.83 19.63 18.52 18.52
.12
16 29.14 29.14 27.82 27.82 25.19 25.19 22.55 22.55 19.91 19.91 17.26 17.26 14.61 14.61
22 42.12 20.58 40.51 19.89 37.29 18.52 34.07 17.16 30.84 15.80 27.61 14.46 24.37 13.18
1000
19 34.64 23.22 33.11 22.48 30.05 21.01 26.97 19.55 23.89 18.12 20.80 16.74 17.71 15.49
.06
16 28.76 26.41 27.26 25.39 24.26 23.38 21.25 21.25 18.22 18.22 15.17 15.17 12.10 12.10
22 49.07 24.22 47.14 23.49 43.29 22.02 39.43 20.56 35.57 19.12 31.71 17.72 27.85 16.48
1400
008 19 40.52 27.88 38.72 27.04 35.13 25.38 31.54 23.74 27.94 22.15 24.33 20.67 20.71 19.62
.10
16 33.30 32.38 31.70 31.12 28.48 28.48 25.25 25.25 22.01 22.01 18.76 18.76 15.50 15.50
22 54.60 27.31 52.46 26.52 48.17 24.95 43.89 23.40 39.61 21.87 35.32 20.41 31.04 19.32
1800
19 45.87 31.43 43.80 30.60 39.68 28.96 35.55 27.35 31.42 25.81 27.28 24.47 23.14 23.14
.12
16 36.21 36.21 34.59 34.59 31.35 31.35 28.10 28.10 24.85 24.85 21.59 21.59 18.33 18.33
22 56.46 26.00 54.28 25.26 49.91 23.80 45.53 22.33 41.15 20.89 36.77 19.47 32.38 18.13
1450
19 46.83 30.42 44.73 29.53 40.53 27.76 36.32 26.01 32.10 24.29 27.87 22.64 23.64 21.21
.05
16 38.11 34.82 36.21 33.56 32.39 31.04 28.56 28.55 24.71 24.71 20.85 20.85 16.97 16.97
22 65.14 31.89 62.64 30.94 57.64 29.05 52.64 27.17 47.63 25.30 42.62 23.47 37.61 21.73
012 1900
19 54.26 36.83 51.85 35.78 47.03 33.70 42.19 31.64 37.35 29.61 32.51 27.68 27.65 26.01
.07
16 44.18 43.13 42.12 41.49 37.99 37.99 33.85 33.85 29.71 29.71 25.55 25.55 21.37 21.37
22 71.98 35.85 69.21 34.85 63.67 32.86 58.13 30.89 52.59 28.93 47.05 27.03 41.51 25.31
2350
19 60.62 42.44 57.89 41.30 52.41 39.02 46.93 36.77 41.45 34.59 35.97 32.55 30.49 30.49
.12
16 47.82 47.82 45.79 45.79 41.72 41.72 37.66 37.66 33.59 33.59 29.52 29.52 25.44 25.44
22 65.89 31.93 63.44 30.98 58.55 29.09 53.65 27.21 48.75 25.34 43.85 23.49 38.94 21.73
1750
19 55.70 36.93 53.09 35.77 47.85 33.46 42.61 31.18 37.35 28.93 32.09 26.75 26.81 24.76
.06
16 44.35 42.14 42.24 40.60 38.02 37.55 33.78 33.78 29.53 29.53 25.27 25.27 20.98 20.98
22 75.61 37.49 72.79 36.44 67.15 34.34 61.51 32.26 55.87 30.19 50.23 28.16 44.58 26.26
2350
014 19 63.64 44.28 60.75 43.02 54.97 40.53 49.19 38.06 43.40 35.64 37.61 33.33 31.81 31.36
.08
16 50.09 50.09 47.97 47.97 43.71 43.71 39.44 39.44 35.17 35.17 30.90 30.90 26.62 26.62
22 83.01 42.04 79.93 40.94 73.75 38.75 67.58 36.57 61.41 34.42 55.23 32.34 49.06 30.52
2950
.10 19 67.98 49.45 65.08 48.26 59.28 45.89 53.48 43.57 47.68 41.33 41.88 39.29 36.08 36.08
16 54.67 54.67 52.53 52.53 48.24 48.24 43.96 43.96 39.67 39.67 35.38 35.38 31.10 31.10
22 82.25 39.79 79.12 38.58 72.88 36.16 66.62 33.74 60.37 31.34 54.10 28.97 47.84 26.65
2100
16 68.47 45.43 65.39 44.06 59.24 41.32 53.07 38.61 46.89 35.94 40.70 33.33 34.50 30.88
.03
16 55.23 51.82 52.57 49.96 47.23 46.25 41.88 41.88 36.52 36.52 31.13 31.13 25.73 25.73
22 94.97 46.65 91.32 45.28 84.03 42.55 76.72 39.83 69.42 37.13 62.11 34.48 54.80 31.95
2800
016 19 79.48 54.48 75.93 52.91 68.84 49.78 61.73 46.68 54.62 43.64 47.50 40.72 40.37 38.14
.05
16 64.12 63.23 61.19 60.85 55.34 55.34 49.48 49.48 43.61 43.61 37.72 37.72 31.82 31.82
22 102.66 51.90 98.96 50.54 91.55 47.82 84.14 45.12 76.73 42.46 69.32 39.90 61.90 37.72
3500
19 85.35 62.06 81.75 60.40 74.54 57.09 67.33 53.84 60.11 50.69 52.89 47.79 45.66 45.66
.08
16 69.63 69.63 66.75 66.75 60.99 60.99 55.23 55.23 49.45 49.45 43.67 43.67 37.88 37.88
22 106.58 52.05 102.62 50.46 94.70 47.29 86.78 44.13 78.85 40.98 70.92 37.84 62.99 34.74
2900
19 89.80 59.51 85.74 57.82 77.63 54.44 69.50 51.08 61.37 47.75 53.21 44.47 45.05 41.29
.03
16 71.75 68.29 68.44 65.88 61.79 61.08 55.13 55.13 48.45 48.45 41.75 41.75 35.03 35.03
22 122.11 60.50 117.57 58.81 108.48 55.45 99.38 52.11 90.29 48.79 81.19 45.52 72.10 42.39
3800
024 19 99.07 69.97 94.89 68.20 86.53 64.66 78.16 61.17 69.79 57.74 61.41 54.46 53.03 51.58
.06
16 80.95 80.95 77.60 77.60 70.90 70.90 64.19 64.19 57.48 57.48 50.76 50.76 44.03 44.03
21 33.27 67.86 128.35 66.08 118.51 62.52 108.68 58.97 98.84 55.46 89.00 52.01 79.16 48.77
4700
.07 19 109.55 80.54 104.99 78.62 95.88 74.79 86.76 71.01 77.65 67.33 68.53 63.85 59.41 59.41
16 88.34 88.34 84.97 84.97 78.24 78.24 71.50 71.50 64.76 64.76 58.02 58.02 51.28 51.28
29
40RM WITH STANDARD COIL COOLING CAPACITIES — SI (cont)
EVAPORATOR
AIR
40RM
(Standard Airflow Ewb
–1 0 2 4 6 8 10
3-Row Coil) (L/s)
(C) TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
BF
22 125.95 61.58 121.69 59.95 113.17 56.69 104.65 53.45 96.11 50.22 87.57 47.04 79.02 43.94
3500
19 131.38 73.49 123.70 71.33 108.30 67.03 92.87 62.76 77.40 58.55 61.89 54.43 46.34 46.34
.04
16 86.95 83.51 83.12 80.66 75.43 74.98 67.71 67.71 59.95 59.95 52.17 52.17 44.34 44.34
22 146.03 72.86 140.80 70.97 130.35 67.19 119.89 63.44 109.43 59.71 98.98 56.05 88.52 52.56
4700
028 19 121.55 85.85 116.28 83.71 105.73 79.45 95.19 75.24 84.63 71.12 74.08 67.17 63.52 63.52
.06
16 97.09 97.09 93.33 93.33 85.80 85.80 78.27 78.27 70.74 70.74 63.20 63.20 55.66 55.66
22 159.37 81.76 153.60 79.77 142.08 75.79 130.55 71.82 119.02 67.89 107.49 64.01 95.96 60.28
5900
19 131.94 98.52 126.54 96.29 115.74 91.83 104.94 87.43 94.14 83.12 83.34 78.97 72.54 72.54
.08
16 105.39 105.39 101.70 101.70 94.30 94.30 86.91 86.91 79.52 79.52 72.13 72.13 64.73 64.73
22 151.16 74.13 146.07 72.13 135.88 68.13 125.69 64.15 115.49 60.19 105.27 56.27 95.05 52.43
4250
19 132.16 88.16 126.02 85.58 113.73 80.44 101.41 75.33 89.07 70.27 76.70 65.32 64.29 60.59
.04
16 103.92 100.45 99.38 97.00 90.28 90.14 81.14 81.14 71.97 71.97 62.77 62.77 53.52 53.52
22 175.30 87.47 169.02 85.21 156.48 80.70 143.93 76.21 131.38 71.76 118.83 67.38 106.28 63.19
5650
034 19 145.93 103.33 139.63 100.72 127.01 95.52 114.39 90.38 101.76 85.34 89.14 80.49 76.50 76.18
.06
16 116.36 116.36 111.88 111.88 102.92 102.92 93.96 93.96 85.00 85.00 76.03 76.03 67.06 67.06
22 191.24 97.85 184.33 95.48 170.49 90.77 156.66 86.08 142.82 81.42 128.99 76.84 115.15 72.42
7050
19 158.48 118.39 151.99 115.68 139.01 110.30 126.02 104.97 113.04 99.75 100.05 94.74 87.07 87.07
.08
16 126.37 126.37 121.95 121.95 113.12 113.12 104.29 104.29 95.45 95.45 86.62 86.62 77.78 77.78
LEGEND 4. Gross capacities shown do not include a deduction for evaporator-
BF — Bypass Factor fan motor heat.
Edb — Entering Dry-Bulb 5. Formulas (cooling):
Ewb — Entering Wet-Bulb sensible heat capacity (kW)
Ldb — Leaving Dry-Bulb tldb = tedb –
1.23 x 10-3 x (L/s)
Lwb — Leaving Wet-Bulb tlwb = wet-bulb temperature corresponding to enthalpy of air leaving
SHC — Sensible Heat Capacity (kW) coil (hlwb)
TC — Total Capacity (kW)
total capacity (kW)
NOTES: hlwb = hewb –
1.20 x 10-3 x (L/s)
1. Ratings based on approximately 8.3 C superheat leaving coil.
2. Direct interpolation is permissible. Do not extrapolate. where hewb = enthalpy of air entering coil (kJ/kg)
3. The SHC is based on 26.7 C db temperature of air entering the
unit. At any other temperature, correct the SHC reading from the
table of cooling capacities as follows:
Correction factor = 1.23 x 10–3 x (1 –BF) x (db –26.7)
Above 26.7 C, add SHC correction to SHC. Below 26.7 C, subtract
SHC correction from SHC.
30
40RM WITH HIGH-CAPACITY COIL COOLING CAPACITIES — ENGLISH
EVAPORATOR
AIR
40RM
(High-Capacity Airflow Ewb
30 35 40 45 50
4-Row Coil) (Cfm)
(F) TC SHC TC SHC TC SHC TC SHC TC SHC
BF
72 124 60 113 55 101 49 87 43 71 37
1,800
67 104 64 93 59 81 53 67 47 52 40
.06
62 86 68 75 62 63 56 49 49 42 42
72 143 69 131 64 117 58 101 52 83 44
2,400
007 67 121 76 108 70 94 64 78 57 60 50
.10
62 101 83 88 76 73 69 60 60 51 51
72 158 77 144 71 129 65 111 58 92 51
3,000
67 134 86 121 80 105 73 87 66 67 58
.12
62 113 95 98 88 82 80 70 70 59 59
72 155 75 141 68 126 61 108 54 89 46
2,250
67 130 80 116 73 101 66 83 59 64 51
.06
62 108 85 94 78 78 70 62 62 52 52
72 179 86 164 80 146 72 126 64 103 56
3,000
008 67 151 95 136 88 118 80 98 71 75 62
.10
62 126 103 110 95 92 86 76 76 64 64
72 197 96 180 89 161 82 139 73 115 63
3,750
67 168 108 151 100 131 92 109 82 84 72
.12
62 141 119 122 110 103 100 87 87 74 74
72 200 96 182 88 161 79 138 70 113 60
3,000
67 168 104 150 96 130 86 107 76 83 66
.05
62 140 112 121 102 101 92 82 82 69 69
72 228 111 208 102 185 93 159 83 130 71
012 4,000
67 194 124 174 114 150 104 124 93 96 81
.07
62 162 135 141 124 119 113 99 99 84 84
72 250 123 228 114 204 105 175 94 143 81
5,000
67 214 140 192 130 166 119 138 107 106 94
.12
62 179 155 156 143 133 130 113 113 96 96
72 251 121 228 110 202 99 173 87 140 74
3,750
67 210 129 187 118 161 106 133 94 102 81
.06
62 174 138 150 126 125 113 100 100 84 84
72 289 139 263 128 233 116 200 103 162 88
5,000
014 67 244 154 218 141 188 128 155 114 119 99
.08
62 203 167 176 153 146 138 121 121 102 102
72 319 155 290 143 258 131 221 116 180 101
6,250
.10 67 271 174 242 161 209 147 172 132 133 115
62 226 192 196 177 164 160 139 139 118 118
72 310 150 281 136 249 122 214 108 174 92
4,500
67 260 160 231 145 199 131 165 116 127 100
.03
62 215 169 186 154 154 138 121 121 102 102
72 361 175 329 161 292 145 250 128 205 110
6,000
016 67 304 191 271 175 235 159 194 141 149 122
.05
62 254 206 220 189 183 170 149 149 125 125
72 401 196 366 181 325 164 280 146 229 127
7,500
67 340 218 304 201 263 183 218 164 167 143
.08
62 285 239 247 220 206 197 172 172 145 145
72 408 197 372 180 331 162 272 141 232 123
6,000
67 344 213 307 195 266 176 220 156 169 135
.03
62 286 227 248 208 207 188 164 164 139 139
72 470 228 429 210 382 191 329 170 269 147
8,000
024 67 399 253 357 233 309 212 256 189 197 166
.06
62 333 275 290 254 242 230 202 202 170 170
72 516 253 471 235 421 215 363 192 297 168
10,000
.07 67 440 287 395 266 343 244 284 219 220 193
62 369 317 322 294 271 266 232 232 196 196
31
40RM WITH HIGH-CAPACITY COIL COOLING CAPACITIES — ENGLISH (cont)
EVAPORATOR
AIR
40RM
(High-Capacity Airflow 30 35 40 45 50
(Cfm) Ewb
4-Row Coil) (F) TC SHC TC SHC TC SHC TC SHC TC SHC
BF
72 470 226 428 208 379 187 328 167 270 144
7,500
67 395 246 354 227 307 205 255 183 197 159
.04
62 329 265 287 244 240 221 193 193 163 163
72 535 260 487 240 434 219 376 196 310 171
028 10,000
67 454 291 407 269 354 246 295 221 228 194
.06
62 380 320 332 296 279 268 235 235 199 199
72 583 287 531 267 475 245 412 221 341 194
12,500
67 499 329 448 306 390 282 325 255 252 225
.08
62 420 367 367 341 310 310 269 269 228 228
72 564 271 513 249 456 225 394 200 324 173
9,000 67 476 296 425 272 368 246 306 220 236 191
.04
62 395 319 344 293 288 265 231 231 195 195
72 642 312 584 288 521 263 451 235 372 205
12,500
034 67 545 349 489 323 425 295 353 265 273 233
.06
62 456 383 398 355 334 322 281 281 238 238
72 699 345 637 320 570 294 495 265 410 233
15,000
67 598 394 537 367 468 338 390 306 303 270
.08
62 503 440 440 409 371 371 322 322 273 273
LEGEND 5. Formulas:
BF — Bypass Factor sensible heat capacity (Btuh)
db — Dry-Bulb Temp (F) Leaving db = entering db –
1.1 x cfm
Ewb — Entering Wet-Bulb Temp (F)
lwb — Leaving Wet-Bulb Temp (F) Leaving wb = wet-bulb temperature corresponding to enthalpy of
SHC — Sensible Heat Capacity (1000 Btuh) air leaving coil (hlwb)
TC — Total Capacity (1000 Btuh) total capacity (Btuh)
hlwb = hewb –
NOTES: 4.5 x cfm
1. Ratings based on approximately 15 F superheat leaving coil. where hewb = enthalpy of air entering coil
3. Dashes indicate coil loading limits are exceeded. 6. SHC is based on 80 F db temperature of air entering evaporator
4. Evaporator fan heat not deducted from ratings. coil.
32
40RM WITH HIGH-CAPACITY COIL COOLING CAPACITIES — SI
EVAPORATOR
AIR
40RM
–1 2 4 7 10
4-Row Coil) (L/s)
(C) TC SHC TC SHC TC SHC TC SHC TC SHC
BF
22 36 17 33 16 29 14 25 13 21 11
850
19 31 19 27 17 24 16 20 14 15 12
.06
17 25 20 22 18 18 16 14 14 12 12
22 42 20 38 19 34 17 30 15 24 13
1130
007 19 36 22 32 21 28 19 23 17 18 15
.10
17 30 24 26 22 22 20 18 18 15 15
22 46 23 42 21 38 19 33 17 27 15
1420
19 39 25 35 24 31 21 25 19 20 17
.12
17 33 28 29 26 24 23 20 20 17 17
22 45 22 41 20 37 18 32 16 26 14
1060
19 38 23 34 21 30 19 24 17 19 15
.06
17 32 25 27 23 23 21 18 18 15 15
22 52 25 48 23 43 21 37 19 30 16
1420
008 19 44 28 40 26 35 23 29 21 22 18
.10
17 37 30 32 28 27 25 22 22 19 19
22 58 28 53 26 47 24 41 21 34 19
1770
19 49 32 44 29 38 27 32 24 25 21
.12
17 41 35 36 32 30 29 26 26 22 22
22 58 28 53 26 47 23 41 21 33 18
1420
19 49 31 44 28 38 25 31 22 24 19
.05
17 41 33 35 30 30 27 24 24 20 20
22 67 33 61 30 54 27 47 24 38 21
012 1890
19 57 36 51 33 44 30 36 27 28 24
.07
17 47 40 41 36 35 33 29 29 25 25
22 73 36 67 33 60 31 51 27 42 24
2360
19 63 41 56 38 49 35 40 31 31 28
.12
17 52 45 46 42 39 38 33 33 28 28
22 73 35 67 32 59 29 51 26 41 22
1770
19 62 38 55 35 47 31 39 28 30 24
.06
17 51 40 44 37 37 33 29 29 25 25
22 85 41 77 38 68 34 59 30 47 26
2360
014 19 72 45 64 41 55 38 45 33 35 29
.08
17 60 49 52 45 43 40 35 35 30 30
22 93 45 85 42 76 38 65 34 53 29
2980
.10 19 79 51 71 47 61 43 50 39 39 34
17 66 56 57 52 48 47 41 41 34 34
22 91 44 82 40 73 36 63 32 51 27
2120
19 76 47 68 43 58 38 48 34 37 29
.03
17 63 50 55 45 45 41 36 36 30 30
22 106 51 96 47 86 43 73 37 60 32
2830
016 19 89 56 79 51 69 46 57 41 44 36
.05
17 74 60 65 55 54 50 44 44 37 37
22 118 57 107 53 95 48 82 43 67 37
3540
19 100 64 89 59 77 54 64 48 49 42
.08
17 84 70 72 65 60 58 50 50 42 42
22 120 58 109 53 97 48 80 41 68 36
2830
19 101 62 90 57 78 52 64 46 50 40
.03
17 84 67 73 61 61 55 48 48 41 41
22 138 67 126 62 112 56 96 50 79 43
3780
024 19 117 74 105 68 91 62 75 56 58 49
.06
17 98 81 85 74 71 67 59 59 50 50
22 151 74 138 69 123 63 106 56 87 49
4720
.07 19 129 84 116 78 100 71 83 64 64 57
17 108 93 94 86 79 78 68 68 58 58
33
40RM WITH HIGH-CAPACITY COIL COOLING CAPACITIES — SI (cont)
EVAPORATOR
AIR
40RM
–1 2 4 7 10
4-Row Coil) (L/s)
(C) TC SHC TC SHC TC SHC TC SHC TC SHC
BF
22 138 66 125 61 111 55 96 49 79 42
3540
19 116 72 104 66 90 60 75 54 58 47
.04
17 96 78 84 72 70 65 57 57 48 48
22 157 76 143 70 127 64 110 57 91 50
4720
028 19 133 85 119 79 104 72 86 65 67 57
.06
17 111 94 97 87 82 79 69 69 58 58
22 171 84 156 78 139 72 121 65 100 57
5900
19 146 96 131 90 114 83 95 75 74 66
.08
17 123 107 107 100 91 91 79 79 67 67
22 165 79 150 73 134 66 115 59 95 51
4250
19 139 87 124 80 108 72 90 64 69 56
.04
17 116 93 101 86 84 78 68 68 57 57
22 188 91 171 84 153 77 132 69 109 60
5660
034 19 160 102 143 95 124 87 104 78 80 68
.06
17 134 112 117 104 98 94 82 82 70 70
22 205 101 187 94 167 86 145 78 120 68
7080
19 175 116 157 108 137 99 114 90 89 79
.08
17 148 129 129 120 109 109 94 94 80 80
LEGEND 4. Gross capacities shown do not include a deduction for evaporator-
BF — Bypass Factor fan motor heat.
1.23 x 10-3 x (L/s)
Lwb — Leaving Wet-Bulb tlwb = wet-bulb temperature corresponding to enthalpy of air leaving
SHC — Sensible Heat Capacity (kW) coil (hlwb)
TC — Total Capacity (kW)
total capacity (kW)
1.20 x 10-3 x (L/s)
3. The SHC is based on 26.7 C db temperature of air entering the
unit. At any other temperature, correct the SHC reading from the
table of cooling capacities.
Correction factor = 1.23 x 10–3 x (1 –BF) x (db –26.7)
Above 26.7 C, add SHC correction to SHC. Below 26.7 C, subtract
SHC correction from SHC.
34
40RMQ COOLING CAPACITIES — ENGLISH
EVAPORATOR
COIL REFRIGERANT TEMP (F)
AIR
UNIT
40RMQ Airflow 30 35 40 45 50
Ewb
(Cfm) (F)
BF TC SHC TC SHC TC SHC TC SHC TC SHC
72 144 69 130 63 116 57 99 50 80 43
2,250
67 120 76 106 70 92 63 76 56 59 50
.06
62 100 83 87 76 71 69 57 57 49 49
72 169 81 151 75 135 68 114 61 94 53
3,000
008 .12
67 140 92 124 85 108 77 89 69 69 62
62 118 101 102 94 84 84 70 70 59 59
72 187 92 168 85 150 78 127 70 104 61
3,750
67 157 106 140 97 120 89 100 81 77 72
.12
62 132 118 112 108 94 94 80 80 68 68
72 193 92 174 81 154 76 132 67 108 58
3,000
67 161 102 143 93 123 85 102 76 79 67
.05
62 134 111 116 102 96 93 78 78 66 66
72 223 108 201 99 179 91 153 81 125 71
4,000
012 .07 67 186 122 166 113 143 104 119 93 92 82
62 157 136 136 126 113 113 95 95 80 80
72 246 122 222 112 198 103 169 93 138 81
5,000
.12 67 207 140 185 131 159 120 132 109 102 97
62 175 159 149 145 126 126 109 109 92 92
72 310 147 282 135 250 122 212 107 175 93
4,500
67 258 161 231 148 199 135 165 120 126 105
.03
62 213 175 185 161 154 146 122 122 102 102
72 366 176 331 161 293 146 248 130 205 114
6,000
016 67 304 196 272 182 234 166 194 149 149 132
.05
62 254 217 219 201 181 181 148 148 125 125
72 409 199 371 185 327 168 277 150 228 132
7,500
67 339 227 303 211 263 194 217 176 168 156
.08
62 285 255 244 236 205 205 172 172 146 146
72 408 197 372 180 331 162 272 141 232 123
6,000
.03 67 344 213 307 195 266 176 220 156 169 135
62 286 227 248 208 207 188 164 164 139 139
72 470 228 429 210 382 191 329 170 269 147
8,000
024 67 399 253 357 233 309 212 256 189 197 166
.06
62 333 275 290 254 242 230 202 202 170 170
72 516 253 471 235 421 215 363 192 297 168
10,000
67 440 287 395 266 343 244 284 219 220 193
.07
62 369 317 322 294 271 266 232 232 196 196
72 470 226 428 208 379 187 328 167 270 144
7,500
67 395 246 354 227 307 205 255 183 197 159
.04
62 329 265 287 244 240 221 193 193 163 163
72 535 260 487 240 434 219 376 196 310 171
028 10,000 67 454 291 407 269 354 246 295 221 228 194
.06
62 380 320 332 296 279 268 235 235 199 199
72 583 287 531 267 475 245 412 221 341 194
12,500
67 499 329 448 306 390 282 325 255 252 225
.08
62 420 367 367 341 310 310 269 269 228 228
LEGEND 4. Formulas:
BF — Bypass Factor sensible heat capacity (Btuh)
db — Dry-Bulb Temp (F) Leaving db = entering db –
1.1 x cfm
Ewb — Entering Wet-Bulb Temp (F)
lwb — Leaving Wet-Bulb Temp (F) Leaving wb = wet-bulb temperature corresponding to enthalpy of air
SHC — Sensible Heat Capacity (1000 Btuh) leaving coil (hlwb)
TC — Total Capacity (1000 Btuh) total capacity (Btuh)
hlwb = hewb –
NOTES: 4.5 x cfm
1. Ratings based on approximately 15 F superheat leaving coil. where hewb = enthalpy of air entering coil
3. Evaporator fan heat not deducted from ratings. 5. SHC is based on 80 F db temperature of air entering evaporator coil.
35
40RMQ COOLING CAPACITIES — SI
EVAPORATOR
COIL REFRIGERANT TEMP (C)
AIR
UNIT
40RMQ Airflow –1 2 4 7 10
Ewb
(L/s) (C)
BF TC SHC TC SHC TC SHC TC SHC TC SHC
22 42.12 20.58 37.29 18.52 34.07 17.16 27.61 14.46 24.37 13.18
1000
19 34.64 23.22 30.05 21.01 26.97 19.55 20.80 16.74 17.71 15.49
.06
16 28.76 26.41 24.26 23.38 21.25 21.25 15.17 15.17 12.10 12.10
22 49.07 24.22 43.29 22.02 39.43 20.56 31.71 17.72 27.85 16.48
1400
008 19 40.52 27.88 35.13 25.38 31.54 23.74 24.33 20.67 20.71 19.62
.10
16 33.30 32.38 28.48 28.48 25.25 25.25 18.76 18.76 15.50 15.50
22 54.60 27.31 48.17 24.95 43.89 23.40 35.32 20.41 31.04 19.32
1800
19 45.87 31.43 39.68 28.96 35.55 27.35 27.28 24.47 23.14 23.14
.12
16 36.21 36.21 31.35 31.35 28.10 28.10 21.59 21.59 18.33 18.33
22 56.46 26.00 49.91 23.80 45.53 22.33 36.77 19.47 32.38 18.13
1450
.05 19 46.83 30.42 40.53 27.76 36.32 26.01 27.87 22.64 23.64 21.21
16 38.11 34.82 32.39 31.04 28.56 28.55 20.85 20.85 16.97 16.97
22 65.14 31.89 57.64 29.05 52.64 27.17 42.62 23.47 37.61 21.73
1900
012 .07 19 54.26 36.83 47.03 33.70 42.19 31.64 32.51 27.68 27.65 26.01
16 44.18 43.13 37.99 37.99 33.85 33.85 25.55 25.55 21.37 21.37
22 71.98 35.85 63.67 32.86 58.13 30.89 47.05 27.03 41.51 25.31
2350 19 60.62 42.44 52.41 39.02 46.93 36.77 35.97 32.55 30.49 30.49
.12
16 47.82 47.82 41.72 41.72 37.66 37.66 29.52 29.52 25.44 25.44
22 91.80 44.17 80.87 39.73 73.57 36.78 58.97 30.93 51.65 28.08
2100
19 75.66 48.99 65.51 44.55 58.73 41.62 45.13 35.92 38.31 33.27
.03
16 61.18 56.01 51.67 49.75 45.31 45.31 32.51 32.51 26.06 26.06
22 107.87 52.14 94.89 47.27 86.24 44.04 68.91 37.79 60.23 35.23
2800
016 19 89.13 59.53 77.11 54.40 69.08 51.05 53.00 44.90 44.93 43.44
.05
16 71.93 69.52 61.19 61.19 54.01 54.01 39.59 39.59 32.34 32.34
22 121.08 59.76 106.35 54.26 96.52 50.62 76.87 43.59 67.04 63.63
3500
19 99.24 68.38 85.93 62.96 77.04 59.43 59.26 53.09 50.35 50.35
.08
16 79.29 79.29 68.32 68.32 61.00 61.00 46.33 46.33 38.98 38.98
22 119.66 57.62 109.11 52.85 96.93 47.60 79.71 41.42 68.10 36.01
2830 19 100.87 62.34 90.05 57.12 77.97 51.58 64.40 45.68 49.61 39.55
.03
16 83.70 66.60 72.62 60.97 60.63 55.06 48.10 48.10 40.60 40.60
22 137.63 66.72 125.62 61.62 111.88 55.96 96.26 49.70 78.71 43.02
024 3780
.06 19 116.80 74.01 104.59 68.36 90.64 62.19 74.91 55.51 57.80 48.52
16 97.53 80.63 84.84 74.32 70.97 67.36 59.10 59.10 49.88 49.88
22 151.09 74.13 138.13 68.84 123.42 63.02 106.30 56.30 87.05 49.10
4720
19 129.03 83.98 115.85 78.05 100.47 71.41 83.21 64.21 64.38 56.52
.07
16 108.25 92.89 94.40 86.06 79.39 77.97 68.09 68.09 57.57 57.57
22 137.64 66.24 125.46 60.87 111.15 54.86 96.13 48.82 79.18 42.16
3540
19 115.75 72.13 103.67 66.40 89.96 60.19 74.75 53.64 57.78 46.64
.04
16 96.47 77.77 83.99 71.53 70.27 64.77 56.60 56.60 47.82 47.82
22 156.70 76.14 142.75 70.35 127.14 64.09 110.11 57.39 90.94 50.10
4720
028 19 133.07 85.25 119.28 78.93 103.69 72.12 86.30 64.80 66.74 56.81
.06
16 111.45 93.61 97.19 86.59 81.61 78.64 68.76 68.76 58.21 58.21
22 170.83 84.21 155.57 78.16 139.25 71.82 120.85 64.69 100.04 56.94
5900
19 146.07 96.33 131.16 89.71 114.35 82.51 95.27 74.61 73.92 65.87
.08
16 122.94 107.43 107.46 99.80 90.70 90.70 78.70 78.70 66.76 66.76
LEGEND 4. Gross capacities shown do not include a deduction for evaporator-fan motor
BF — Bypass Factor heat.
1.23 x 10-3 x (L/s)
Lwb — Leaving Wet-Bulb
SHC — Sensible Heat Capacity (kW) tlwb = wet-bulb temperature corresponding to enthalpy of air leaving
TC — Total Capacity (kW) coil (hlwb)
total capacity (kW)
1.20 x 10-3 x (L/s)
3. The SHC is based on 26.7 C db temperature of air entering the unit.
36
HYDRONIC HEATING CAPACITIES — ENGLISH HYDRONIC HEATING CAPACITIES — SI
1-ROW 2-ROW 1-ROW 2-ROW
STEAM* HOT WATER COIL† STEAM* HOT WATER COIL†
UNIT AIRFLOW AIRFLOW
(Cfm) Water UNIT Water
(L/s)
Cap. Ldb Cap. Ldb Flow PD Cap. Ldb Cap. Ldb Flow PD
(Gpm) (L/s)
1,800 146 134 156.0 140 15.6 3.4 850 43 57 46 59 1.0 10.2
40RM 40RM
2,400 173 126 183.0 131 18.3 4.3 1150 53 53 53 53 1.2 12.8
007 007
3,000 209 123 206.0 124 20.6 5.2 1450 62 51 61 50 1.3 16.0
40RM 40RM
2,250 168 129 174.0 133 17.4 4.0 1000 48 55 50 56 1.1 11.5
40RMQ 40RMQ
3,000 209 123 206.0 124 20.6 5.2 1400 59 50 60 50 1.3 15.3
40RMS 3,750 240 117 238.0 118 23.8 6.5 40RMS
1800 71 47 70 47 1.5 19.5
008 008
2,550 183 125 199.0 132 19.9 4.5 1200 54 52 58 55 1.3 13.4
40RMS 3,400 229 121 233.0 123 23.3 5.7 40RMS
010 1600 64 48 69 50 1.5 17.3
010
4,250 254 114 271.0 119 27.1 7.2 2000 74 46 79 48 1.7 21.4
40RM 40RM
3,000 209 123 299.0 152 29.9 5.0 1450 62 50 88 65 1.9 15.0
40RMS 40RMS
4,000 243 115 275.0 124 27.5 6.6 1900 72 46 90 54 2.0 24.7
40RMQ 40RMQ
5,000 279 111 316.0 119 31.6 8.2 2350 82 44 93 48 2.0 24.5
012 012
40RM 3,750 370 150 362.0 149 36.2 4.2 40RM 1750 108 66 106 65 2.3 12.4
40RMS 5,000 425 137 409.0 136 40.9 5.1 40RMS 2350 122 58 120 57 2.6 15.2
014 6,250 465 128 456.0 128 45.6 6.0 014 2950 136 53 134 52 2.9 17.9
40RM 40RM
4,500 402 141 412.0 145 41.2 4.5 2100 117 61 120 62 2.6 13.3
40RMQ 40RMQ
6,000 458 129 471.0 133 47.1 5.5 2800 129 53 137 55 3.0 16.2
40RMS 7,500 479 118 529.0 125 52.9 6.6 40RMS
016 3500 140 48 154 51 3.3 19.5
016
40RM 40RM
40RMQ 6,000 458 129 506.0 138 50.6 5.1 2900 135 53 150 58 3.3 15.6
8,000 487 115 584.0 128 58.4 6.3 40RMQ
40RMS 40RMS 3800 140 46 170 52 3.7 18.6
10,000 499 105 652.0 120 65.2 7.5 4700 146 41 191 49 4.1 22.3
024 024
40RM 40RM
7,500 511 122 649.0 140 64.9 5.7 3500 149 50 189 60 4.1 16.9
40RMQ 10,000 575 112 752.0 130 75.2 7.1 40RMQ
4700 166 44 218 53 4.7 20.8
40RMS 40RMS
028 12,500 626 106 842.0 122 84.2 8.5 028 5900 183 41 247 50 5.4 25.4
40RM 9,000 560 117 735.0 136 73.5 6.2 40RM 4250 164 47 215 57 4.7 18.5
40RMS 12,000 621 107 850.0 126 85.0 7.8 40RMS 5650 180 41 247 51 5.4 22.8
034 15,000 670 101 950.0 119 95.0 9.3 034 7050 196 38 278 48 6.0 27.7
LEGEND LEGEND
Cap. — Capacity (Btuh in thousands) Cap. — Capacity (kW)
Ldb — Leaving-Air Dry-Bulb Temp (F) Ldb — Leaving-Air Dry-Bulb Temp (C)
PD — Pressure Drop (ft water) PD — Pressure Drop (kPa)
*Based on 5 psig steam, 60 F entering-air temperature. All steam coils are non- *Based on 34.5 kPag steam, 15.6 C entering-air temperature. All steam coils are
freeze type. non-freeze type.
†Based on 200 F entering water, 20 F water temperature drop, 60 F entering-air †Based on 93.3 C entering water temperature, 11.1 C water temperature drop,
temperature. 15.6 C entering-air temperature.
NOTES: NOTES:
1. Maximum operating limits for heating coils: 20 psig at 260 F. 1. Maximum operating limits for heating coils: 138 kPag at 126.7 C.
Capacity (Btuh) Capacity (kW)
2. Leaving db = ent db (F) + 2. Leaving db = ent db (C) +
1.1 x cfm 1.23 x 10–3 x L/s
3. See Heating Correction Factors table. 3. See Heating Correction Factors table.
HEATING CORRECTION FACTORS — ENGLISH HEATING CORRECTION FACTORS — SI

HOT WATER COIL HOT WATER COIL
Water Temp Ent Water Entering-Air Temp (F) Water Temp Ent Water Entering-Air Temp (C)
Drop Temp Drop Temp
40 50 60 70 80 4 10 16 20 25
(F) (F) (C) (C)
140 0.72 0.64 0.57 0.49 0.41 60 0.72 0.64 0.55 0.50 0.43
160 0.89 0.81 0.74 0.66 0.58 70 0.87 0.79 0.71 0.65 0.58
10 180 1.06 0.98 0.90 0.83 0.75 5 80 1.02 0.94 0.86 0.80 0.73
200 1.22 1.15 1.07 1.00 0.92 90 1.17 1.09 1.01 0.95 0.89
220 1.39 1.32 1.24 1.17 1.09 100 1.32 1.24 1.16 1.10 1.04
140 0.64 0.57 0.49 0.41 0.33 60 0.65 0.56 0.48 0.42 0.35
160 0.81 0.74 0.66 0.58 0.51 70 0.80 0.72 0.63 0.58 0.51
20 180 0.98 0.91 0.83 0.75 0.68 11 80 0.95 0.87 0.79 0.73 0.66
200 1.15 1.08 1.00 0.93 0.85 90 1.10 1.02 0.94 0.89 0.82
220 1.32 1.25 1.17 1.10 1.02 100 1.26 1.18 1.09 1.04 0.97
140 0.56 0.49 0.41 0.33 0.24 60 0.56 0.48 0.39 0.33 0.26
160 0.74 0.66 0.58 0.51 0.43 70 0.72 0.63 0.55 0.49 0.42
30 180 0.91 0.83 0.76 0.68 0.60 16 80 0.87 0.79 0.70 0.65 0.58
200 1.08 1.00 0.93 0.85 0.78 90 1.02 0.94 0.86 0.81 0.74
220 1.25 1.18 1.10 1.03 0.95 100 1.18 1.10 1.02 0.97 0.90
STEAM COIL STEAM COIL

Steam Pressure Entering-Air Temp (F) Steam Pressure Entering-Air Temp (C)
(psig) 40 50 60 70 80 (kPag) 4 10 16 20 25
0 1.06 0.98 0.91 0.85 0.78 0 1.07 0.99 0.91 0.86 0.80
2 1.09 1.02 0.95 0.89 0.82 14 1.10 1.02 0.95 0.90 0.84
5 1.13 1.06 1.00 0.93 0.87 35 1.14 1.07 0.99 0.95 0.89
NOTE: Multiply capacity given in the Hydronic Heating Capacities table by the cor- NOTE: Multiply capacity given in the Hydronic Heating Capacities table by the cor-
rection factor for conditions at which unit is actually operating. Correct leaving-air rection factor for conditions at which unit is actually operating. Correct leaving-air
temperature using formula in Note 2 of Hydronic Heating Capacities table. temperature using formula in Note 2 of Hydronic Heating Capacities table.
37
FAN PERFORMANCE DATA — 0.0-1.2 in. wg ESP — 60 Hz, ENGLISH
EXTERNAL STATIC PRESSURE (in. wg)
AIRFLOW
UNIT 0.0 0.2 0.4 0.6 0.8 1.0 1.2
(Cfm)
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 399 0.19 454 0.24 548 0.35 634 0.47 713 0.60 785 0.74 850 0.89
2,100 446 0.28 497 0.34 583 0.46 660 0.59 733 0.73 802 0.88 867 1.05
40RM 2,400 498 0.40 541 0.47 622 0.60 693 0.74 760 0.89 824 1.05 885 1.22
007* 2,700 544 0.55 588 0.63 663 0.78 730 0.93 792 1.09 851 1.26 909 1.44
3,000 594 0.73 635 0.82 707 0.99 770 1.15 828 1.32 883 1.50 937 1.69
2,250 273 0.08 493 0.37 580 0.49 656 0.62 727 0.76 794 0.92 858 1.08
40RM* 2,600 322 0.15 540 0.52 622 0.66 693 0.81 757 0.96 819 1.12 878 1.29
40RMQ 3,000 552 0.65 595 0.73 673 0.91 740 1.07 800 1.24 856 1.41 910 1.60
40RMS 3,400 615 0.91 653 1.01 726 1.21 789 1.40 846 1.59 899 1.78 950 1.97
008
3,750 671 1.20 706 1.31 773 1.53 834 1.74 889 1.95 940 2.16 988 2.37
2,550 396 0.42 502 0.54 586 0.65 658 0.76 722 0.87 780 0.97 833 1.08
2,975 462 0.60 556 0.72 634 0.84 701 0.95 762 1.06 818 1.18 870 1.29
40RMS 3,400 527 0.80 612 0.93 684 1.06 748 1.18 806 1.30 860 1.41 910 1.53
010
3,825 593 1.05 670 1.18 737 1.31 797 1.44 852 1.56 904 1.68 952 1.80
4,250 659 1.33 729 1.47 791 1.60 848 1.73 901 1.86 950 1.98 997 2.11
3,000 399 0.29 573 0.69 654 0.86 722 1.03 784 1.19 841 1.37 896 1.55
40RM* 3,500 604 0.92 641 1.02 714 1.22 780 1.42 838 1.61 892 1.81 942 2.01
40RMS 4,000 680 1.33 713 1.45 778 1.68 839 1.91 896 2.14 947 2.36 995 2.58
012 4,500 756 1.86 787 1.99 845 2.26 901 2.52 955 2.78 1005 3.03 1051 3.28
5,000 834 2.51 861 2.67 914 2.96 966 3.25 1016 3.54 1064 3.82 1109 4.11
3,000 421 0.35 592 0.73 670 0.90 737 1.06 797 1.23 854 1.41 908 1.59
3,500 626 0.98 664 1.08 735 1.28 798 1.48 855 1.67 908 1.87 958 2.07
40RMQ 4,000 706 1.42 738 1.54 803 1.77 862 2.00 917 2.23 967 2.45 1014 2.67
012 4,500 786 1.99 815 2.12 873 2.39 929 2.65 980 2.90 1028 3.16 1073 3.41
5,000 867 2.70 893 2.84 946 3.14 997 3.43 1046 3.72 1092 4.00 1135 4.28
3,750 394 0.40 453 0.52 558 0.80 643 1.10 717 1.39 785 1.71 848 2.04
4,300 436 0.57 487 0.70 586 1.00 670 1.34 742 1.67 806 2.01 867 2.36
40RM*
40RMS 5,000 492 0.86 535 0.99 623 1.31 704 1.69 775 2.08 838 2.47 896 2.86
014 5,700 550 1.23 587 1.37 664 1.71 740 2.11 809 2.55 872 2.99 929 3.43
6,250 596 1.59 630 1.74 700 2.09 770 2.51 837 2.97 899 3.45 955 3.94
4,500 428 0.59 475 0.70 570 0.99 656 1.33 730 1.68 796 2.02 856 2.38
5,300 488 0.92 528 1.04 609 1.34 689 1.71 762 2.11 827 2.51 886 2.92
40RM*
40RMS 6,000 542 1.29 578 1.43 649 1.74 721 2.11 791 2.55 855 3.00 914 3.46
016 6,800 604 1.83 637 1.99 700 2.32 763 2.70 826 3.15 888 3.64 946 4.15
7,500 660 2.42 690 2.59 747 2.95 804 3.34 861 3.79 919 4.29 975 4.83
4,500 437 0.61 483 0.72 576 1.01 660 1.35 732 1.69 797 2.03 856 2.38
5,300 499 0.95 538 1.07 617 1.37 696 1.74 767 2.13 830 2.53 888 2.94
40RMQ 6,000 555 1.34 590 1.48 659 1.79 730 2.17 798 2.59 860 3.04 918 3.49
016 6,800 620 1.91 651 2.06 712 2.39 774 2.78 836 3.22 896 3.71 952 4.21
7,500 677 2.52 706 2.69 761 3.04 817 3.44 873 3.89 929 4.39 984 4.93
6,000 532 1.25 569 1.39 639 1.69 711 2.06 781 2.48 846 2.93 905 3.39
7,000 608 1.93 641 2.09 702 2.42 763 2.80 824 3.23 885 3.71 943 4.23
40RM*
40RMS 8,000 686 2.83 716 3.01 770 3.38 823 3.77 876 4.21 930 4.70 983 5.24
024 9,000 764 3.97 791 4.18 841 4.59 888 5.02 935 5.47 982 5.96 1030 6.51
10,000 843 5.38 868 5.62 914 6.09 957 6.55 1000 7.02 1042 7.53 1084 8.08
6,000 542 1.29 577 1.42 646 1.72 716 2.09 785 2.51 849 2.95 907 3.40
7,000 620 1.99 652 2.15 711 2.48 771 2.85 831 3.28 890 3.76 947 4.27
40RMQ 8,000 700 2.92 728 3.10 781 3.46 833 3.85 885 4.29 938 4.78 990 5.32
024 9,000 781 4.10 806 4.30 854 4.71 900 5.13 946 5.58 993 6.08 1039 6.62
10,000 862 5.56 885 5.79 929 6.24 971 6.70 1012 7.18 1054 7.69 1096 8.24
7,500 456 1.29 490 1.47 556 1.85 621 2.25 678 2.64 729 3.06 778 3.60
8,750 521 1.98 551 2.18 608 2.61 664 3.07 720 3.53 770 3.99 816 4.45
40RM*
40RMS 10,000 587 2.88 614 3.11 664 3.59 714 4.09 763 4.62 812 5.15 857 5.68
028 11,250 653 4.03 678 4.29 724 4.82 768 5.37 812 5.95 856 6.54 899 7.14
12,500 720 5.46 743 5.75 785 6.33 825 6.93 865 7.55 904 8.20 944 8.86
7,500 476 1.39 510 1.58 579 1.99 644 2.40 701 2.81 752 3.29 804 3.96
8,750 545 2.14 574 2.35 633 2.81 691 3.29 747 3.77 797 4.25 842 4.76
40RMQ 10,000 615 3.12 641 3.36 692 3.87 743 4.41 794 4.96 843 5.51 888 6.05
028 11,250 685 4.37 709 4.64 754 5.20 800 5.79 845 6.40 891 7.02 935 7.64
12,500 756 5.92 778 6.22 819 6.83 860 7.47 901 8.14 942 8.83 983 9.52
9,000 521 1.99 550 2.25 616 2.77 676 3.23 731 3.72 782 4.20 829 4.70
10,500 596 3.16 623 3.40 672 3.89 720 4.40 767 4.94 814 5.50 859 6.05
40RM*
40RMS 12,000 673 4.63 698 4.90 743 5.45 785 6.02 826 6.62 867 7.23 908 7.87
034 13,500 751 6.51 773 6.82 815 7.44 853 8.06 890 8.71 927 9.38 963 10.07
15,000 829 8.84 850 9.19 888 9.88 924 10.57 958 11.27 991 11.99 1024 12.73
*With standard 3-row coil.

38
AIRFLOW
UNIT 1.4 1.6 1.8 2.0 2.2 2.4
(Cfm)
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 910 1.04 965 1.20 1016 1.36 1065 1.52 1111 1.69 1155 1.86
2,100 927 1.21 983 1.38 1035 1.56 1084 1.74 1131 1.92 1175 2.11
40RM* 2,400 944 1.41 999 1.59 1052 1.78 1101 1.98 1149 2.18 1193 2.38
007 2,700 964 1.63 1018 1.82 1069 2.03 1118 2.24 1165 2.45 — —
3,000 989 1.89 1039 2.10 1089 2.31 1136 2.53 1183 2.76 — —
2,250 918 1.26 975 1.43 1029 1.62 1079 1.80 1126 1.99 1172 2.18
40RM* 2,600 936 1.48 991 1.67 1044 1.87 1094 2.07 1142 2.28 1188 2.49
40RMQ 3,000 963 1.79 1014 1.99 1064 2.20 1113 2.42 1159 2.64 — —
40RMS 3,400 998 2.18 1045 2.39 1092 2.61 1137 2.83 1182 3.07 — —
008
3,750 1034 2.58 1078 2.80 1122 3.03 1164 3.27 — — — —
2,550 884 1.18 931 1.29 975 1.40 1018 1.50 1059 1.61 — —
2,975 919 1.40 965 1.51 1009 1.62 1050 1.73 1090 1.84 — —
40RMS 3,400 957 1.64 1002 1.76 1044 1.87 1085 1.98 1124 2.10 — —
010
3,825 998 1.92 1041 2.04 1082 2.16 1122 2.27 1160 2.39 — —
4,250 1041 2.23 1083 2.35 1123 2.48 1161 2.60 1199 2.72 — —
3,000 949 1.74 1000 1.93 1050 2.14 1099 2.36 1147 2.58 1192 2.81
40RM* 3,500 990 2.21 1037 2.42 1083 2.64 1128 2.86 1172 3.10 — —
40RMS 4,000 1040 2.80 1084 3.03 1126 3.26 1167 3.50 — — — —
012 4,500 1094 3.53 1136 3.78 1176 4.03 — — — — — —
5,000 1151 4.39 1191 4.66 — — — — — — — —
3,000 961 1.78 1012 1.98 1062 2.19 1111 2.41 1158 2.64 — —
3,500 1005 2.27 1052 2.49 1098 2.71 1142 2.94 1186 3.18 — —
40RMQ 4,000 1058 2.90 1101 3.13 1143 3.36 1184 3.60 — — — —
012 4,500 1116 3.66 1157 3.91 1196 4.16 — — — — — —
5,000 1176 4.56 — — — — — — — — — —
3,750 909 2.37 968 2.74 1026 3.12 1080 3.51 1131 3.92 1181 4.32
4,300 925 2.73 980 3.11 1034 3.52 1084 3.92 1135 4.35 1184 4.78
40RM*
40RMS 5,000 950 3.26 1002 3.67 1052 4.09 1101 4.53 1148 4.98 1190 5.44
014 5,700 981 3.88 1031 4.33 1079 4.79 1125 5.25 1169 5.73 — —
6,250 1007 4.42 1057 4.91 1103 5.40 1148 5.90 1191 6.40 — —
4,500 912 2.75 967 3.13 1019 3.52 1070 3.92 1120 4.35 1168 4.79
5,300 940 3.33 992 3.75 1041 4.18 1088 4.61 1134 5.06 1179 5.52
40RM*
40RMS 6,000 968 3.92 1018 4.38 1066 4.85 1112 5.32 1156 5.80 1198 6.29
016 6,800 1000 4.67 1050 5.19 1097 5.71 1142 6.23 1185 6.76 — —
7,500 1028 5.39 1078 5.97 1125 6.54 1170 7.11 — — — —
4,500 912 2.75 967 3.12 1019 3.52 1070 3.92 1120 4.35 1168 4.79
5,300 942 3.34 992 3.76 1041 4.18 1088 4.61 1134 5.06 1179 5.52
40RMQ 6,000 971 3.95 1020 4.40 1067 4.86 1112 5.33 1156 5.81 1198 6.29
016 6,800 1005 4.72 1054 5.23 1101 5.75 1145 6.27 1187 6.79 — —
7,500 1036 5.48 1084 6.04 1131 6.61 1174 7.17 — — — —
6,000 954 3.83 1005 4.27 1052 4.72 1098 5.22 1142 5.67 — —
7,000 990 4.74 1040 5.24 1090 5.80 1135 6.30 1176 6.84 — —
40RM*
40RMS 8,000 1028 5.79 1078 6.38 1130 7.00 1173 7.60 — — — —
024 9,000 1073 7.11 1120 7.72 1169 8.37 — — — — — —
10,000 1126 8.75 1166 9.37 — — — — — — — —
6,000 961 3.86 1011 4.31 1058 4.77 1104 5.24 1147 5.71 — —
7,000 1000 4.79 1050 5.32 1097 5.85 1142 6.38 1184 6.91 — —
40RMQ 8,000 1041 5.88 1090 6.47 1137 7.07 1181 7.67 — — — —
024
9,000 1086 7.21 1133 7.82 1178 8.47 — — — — — —
10,000 1138 8.83 1180 9.46 — — — — — — — —
7,500 831 4.41 870 5.10 913 5.90 950 6.88 985 7.70 — —
40RM* 8,750 859 4.97 901 5.59 944 6.42 980 7.20 1020 8.10 — —
40RMS 10,000 900 6.20 939 6.74 976 7.33 1013 8.00 1050 8.82 — —
028 11,250 941 7.73 980 8.32 1017 8.90 1052 9.51 1086 10.16 — —
12,500 984 9.53 1022 10.19 1058 10.84 1093 11.49 — — — —
7,500 874 5.33 897 5.91 940 6.80 990 7.50 — — — —
8,750 886 5.36 930 6.13 982 7.32 1020 8.10 — — — —
40RMQ 10,000 930 6.60 969 7.20 1007 7.89 1045 8.71 — — — —
028 11,250 976 8.25 1014 8.86 1051 9.49 1086 10.17 — — — —
12,500 1023 10.20 1061 10.88 1097 11.56 — — — — — —
9,000 866 5.20 899 5.85 950 6.65 989 7.38 1029 8.32 1077 9.74
10,500 902 6.60 942 7.14 980 7.70 1016 8.31 1051 8.99 1085 9.77
40RM*
40RMS 12,000 949 8.50 988 9.14 1026 9.76 1062 10.38 1095 11.01 — —
034 13,500 1000 10.78 1036 11.49 1073 12.21 — — — — — —
15,000 1057 13.49 1090 14.28 — — — — — — — —

39
AIRFLOW
UNIT 0.0 0.2 0.4 0.6 0.8 1.0 1.2
(Cfm)
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 399 0.19 454 0.24 548 0.35 634 0.47 713 0.60 785 0.74 850 0.89
2,100 446 0.28 497 0.34 583 0.46 660 0.59 733 0.73 802 0.88 867 1.05
40RM 2,400 498 0.40 541 0.47 622 0.60 693 0.74 760 0.89 824 1.05 885 1.22
007* 2,700 544 0.55 588 0.63 663 0.78 730 0.93 792 1.09 851 1.26 909 1.44
3,000 594 0.73 635 0.82 707 0.99 770 1.15 828 1.32 883 1.50 937 1.69
2,250 273 0.08 493 0.37 580 0.49 656 0.62 727 0.76 794 0.92 858 1.08
40RM* 2,600 322 0.15 540 0.52 622 0.66 693 0.81 757 0.96 819 1.12 878 1.29
40RMQ 3,000 552 0.65 595 0.73 673 0.91 740 1.07 800 1.24 856 1.41 910 1.60
40RMS 3,400 615 0.91 653 1.01 726 1.21 789 1.40 846 1.59 899 1.78 950 1.97
008
3,750 671 1.20 706 1.31 773 1.53 834 1.74 889 1.95 940 2.16 988 2.37
2,550 396 0.42 502 0.54 586 0.65 658 0.76 722 0.87 780 0.97 833 1.08
2,975 462 0.60 556 0.72 634 0.84 701 0.95 762 1.06 818 1.18 870 1.29
40RMS 3,400 527 0.80 612 0.93 684 1.06 748 1.18 806 1.30 860 1.41 910 1.53
010
3,825 593 1.05 670 1.18 737 1.31 797 1.44 852 1.56 904 1.68 952 1.80
4,250 659 1.33 729 1.47 791 1.60 848 1.73 901 1.86 950 1.98 997 2.11
3,000 399 0.29 573 0.69 654 0.86 722 1.03 784 1.19 841 1.37 896 1.55
40RM* 3,500 604 0.92 641 1.02 714 1.22 780 1.42 838 1.61 892 1.81 942 2.01
40RMS 4,000 680 1.33 713 1.45 778 1.68 839 1.91 896 2.14 947 2.36 995 2.58
012 4,500 756 1.86 787 1.99 845 2.26 901 2.52 955 2.78 1005 3.03 1051 3.28
5,000 834 2.51 861 2.67 914 2.96 966 3.25 1016 3.54 1064 3.82 1109 4.11
3,000 421 0.35 592 0.73 670 0.90 737 1.06 797 1.23 854 1.41 908 1.59
3,500 626 0.98 664 1.08 735 1.28 798 1.48 855 1.67 908 1.87 958 2.07
40RMQ 4,000 706 1.42 738 1.54 803 1.77 862 2.00 917 2.23 967 2.45 1014 2.67
012 4,500 786 1.99 815 2.12 873 2.39 929 2.65 980 2.90 1028 3.16 1073 3.41
5,000 867 2.70 893 2.84 946 3.14 997 3.43 1046 3.72 1092 4.00 1135 4.28
3,750 394 0.40 453 0.52 558 0.80 643 1.10 717 1.39 785 1.71 848 2.04
4,300 436 0.57 487 0.70 586 1.00 670 1.34 742 1.67 806 2.01 867 2.36
40RM*
40RMS 5,000 492 0.86 535 0.99 623 1.31 704 1.69 775 2.08 838 2.47 896 2.86
014 5,700 550 1.23 587 1.37 664 1.71 740 2.11 809 2.55 872 2.99 929 3.43
6,250 596 1.59 630 1.74 700 2.09 770 2.51 837 2.97 899 3.45 955 3.94
4,500 428 0.59 475 0.70 570 0.99 656 1.33 730 1.68 796 2.02 856 2.38
5,300 488 0.92 528 1.04 609 1.34 689 1.71 762 2.11 827 2.51 886 2.92
40RM*
40RMS 6,000 542 1.29 578 1.43 649 1.74 721 2.11 791 2.55 855 3.00 914 3.46
016 6,800 604 1.83 637 1.99 700 2.32 763 2.70 826 3.15 888 3.64 946 4.15
7,500 660 2.42 690 2.59 747 2.95 804 3.34 861 3.79 919 4.29 975 4.83
4,500 437 0.61 483 0.72 576 1.01 660 1.35 732 1.69 797 2.03 856 2.38
5,300 499 0.95 538 1.07 617 1.37 696 1.74 767 2.13 830 2.53 888 2.94
40RMQ 6,000 555 1.34 590 1.48 659 1.79 730 2.17 798 2.59 860 3.04 918 3.49
016 6,800 620 1.91 651 2.06 712 2.39 774 2.78 836 3.22 896 3.71 952 4.21
7,500 677 2.52 706 2.69 761 3.04 817 3.44 873 3.89 929 4.39 984 4.93
6,000 532 1.25 569 1.39 639 1.69 711 2.06 781 2.48 846 2.93 905 3.39
7,000 608 1.93 641 2.09 702 2.42 763 2.80 824 3.23 885 3.71 943 4.23
40RM*
40RMS 8,000 686 2.83 716 3.01 770 3.38 823 3.77 876 4.21 930 4.70 983 5.24
024 9,000 764 3.97 791 4.18 841 4.59 888 5.02 935 5.47 982 5.96 1030 6.51
10,000 843 5.38 868 5.62 914 6.09 957 6.55 1000 7.02 1042 7.53 1084 8.08
6,000 542 1.29 577 1.42 646 1.72 716 2.09 785 2.51 849 2.95 907 3.40
7,000 620 1.99 652 2.15 711 2.48 771 2.85 831 3.28 890 3.76 947 4.27
40RMQ 8,000 700 2.92 728 3.10 781 3.46 833 3.85 885 4.29 938 4.78 990 5.32
024 9,000 781 4.10 806 4.30 854 4.71 900 5.13 946 5.58 993 6.08 1039 6.62
10,000 862 5.56 885 5.79 929 6.24 971 6.70 1012 7.18 1054 7.69 1096 8.24
7,500 456 1.29 490 1.47 556 1.85 621 2.25 678 2.64 729 3.06 778 3.60
8,750 521 1.98 551 2.18 608 2.61 664 3.07 720 3.53 770 3.99 816 4.45
40RM*
40RMS 10,000 587 2.88 614 3.11 664 3.59 714 4.09 763 4.62 812 5.15 857 5.68
028 11,250 653 4.03 678 4.29 724 4.82 768 5.37 812 5.95 856 6.54 899 7.14
12,500 720 5.46 743 5.75 785 6.33 825 6.93 865 7.55 904 8.20 944 8.86
7,500 476 1.39 510 1.58 579 1.99 644 2.40 701 2.81 752 3.29 804 3.96
8,750 545 2.14 574 2.35 633 2.81 691 3.29 747 3.77 797 4.25 842 4.76
40RMQ 10,000 615 3.12 641 3.36 692 3.87 743 4.41 794 4.96 843 5.51 888 6.05
028 11,250 685 4.37 709 4.64 754 5.20 800 5.79 845 6.40 891 7.02 935 7.64
12,500 756 5.92 778 6.22 819 6.83 860 7.47 901 8.14 942 8.83 983 9.52
9,000 521 1.99 550 2.25 616 2.77 676 3.23 731 3.72 782 4.20 829 4.70
10,500 596 3.16 623 3.40 672 3.89 720 4.40 767 4.94 814 5.50 859 6.05
40RM*
40RMS 12,000 673 4.63 698 4.90 743 5.45 785 6.02 826 6.62 867 7.23 908 7.87
034 13,500 751 6.51 773 6.82 815 7.44 853 8.06 890 8.71 927 9.38 963 10.07
15,000 829 8.84 850 9.19 888 9.88 924 10.57 958 11.27 991 11.99 1024 12.73

40
AIRFLOW
UNIT 1.4 1.6 1.8 2.0 2.2 2.4
(Cfm)
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 910 1.04 965 1.20 1016 1.36 1065 1.52 1111 1.69 1155 1.86
2,100 927 1.21 983 1.38 1035 1.56 1084 1.74 1131 1.92 1175 2.11
40RM* 2,400 944 1.41 999 1.59 1052 1.78 1101 1.98 1149 2.18 1193 2.38
007 2,700 964 1.63 1018 1.82 1069 2.03 1118 2.24 1165 2.45 — —
3,000 989 1.89 1039 2.10 1089 2.31 1136 2.53 1183 2.76 — —
2,250 918 1.26 975 1.43 1029 1.62 1079 1.80 1126 1.99 1172 2.18
40RM* 2,600 936 1.48 991 1.67 1044 1.87 1094 2.07 1142 2.28 1188 2.49
40RMQ 3,000 963 1.79 1014 1.99 1064 2.20 1113 2.42 1159 2.64 — —
40RMS 3,400 998 2.18 1045 2.39 1092 2.61 1137 2.83 1182 3.07 — —
008
3,750 1034 2.58 1078 2.80 1122 3.03 1164 3.27 — — — —
2,550 884 1.18 931 1.29 975 1.40 1018 1.50 1059 1.61 — —
2,975 919 1.40 965 1.51 1009 1.62 1050 1.73 1090 1.84 — —
40RMS 3,400 957 1.64 1002 1.76 1044 1.87 1085 1.98 1124 2.10 — —
010
3,825 998 1.92 1041 2.04 1082 2.16 1122 2.27 1160 2.39 — —
4,250 1041 2.23 1083 2.35 1123 2.48 1161 2.60 1199 2.72 — —
3,000 949 1.74 1000 1.93 1050 2.14 1099 2.36 1147 2.58 1192 2.81
40RM* 3,500 990 2.21 1037 2.42 1083 2.64 1128 2.86 1172 3.10 — —
40RMS 4,000 1040 2.80 1084 3.03 1126 3.26 1167 3.50 — — — —
012 4,500 1094 3.53 1136 3.78 1176 4.03 — — — — — —
5,000 1151 4.39 1191 4.66 — — — — — — — —
3,000 961 1.78 1012 1.98 1062 2.19 1111 2.41 1158 2.64 — —
3,500 1005 2.27 1052 2.49 1098 2.71 1142 2.94 1186 3.18 — —
40RMQ 4,000 1058 2.90 1101 3.13 1143 3.36 1184 3.60 — — — —
012 4,500 1116 3.66 1157 3.91 1196 4.16 — — — — — —
5,000 1176 4.56 — — — — — — — — — —
3,750 909 2.37 968 2.74 1026 3.12 1080 3.51 1131 3.92 1181 4.32
4,300 925 2.73 980 3.11 1034 3.52 1084 3.92 1135 4.35 1184 4.78
40RM*
40RMS 5,000 950 3.26 1002 3.67 1052 4.09 1101 4.53 1148 4.98 1190 5.44
014 5,700 981 3.88 1031 4.33 1079 4.79 1125 5.25 1169 5.73 — —
6,250 1007 4.42 1057 4.91 1103 5.40 1148 5.90 1191 6.40 — —
4,500 912 2.75 967 3.13 1019 3.52 1070 3.92 1120 4.35 1168 4.79
5,300 940 3.33 992 3.75 1041 4.18 1088 4.61 1134 5.06 1179 5.52
40RM*
40RMS 6,000 968 3.92 1018 4.38 1066 4.85 1112 5.32 1156 5.80 1198 6.29
016 6,800 1000 4.67 1050 5.19 1097 5.71 1142 6.23 1185 6.76 — —
7,500 1028 5.39 1078 5.97 1125 6.54 1170 7.11 — — — —
4,500 912 2.75 967 3.12 1019 3.52 1070 3.92 1120 4.35 1168 4.79
5,300 942 3.34 992 3.76 1041 4.18 1088 4.61 1134 5.06 1179 5.52
40RMQ 6,000 971 3.95 1020 4.40 1067 4.86 1112 5.33 1156 5.81 1198 6.29
016 6,800 1005 4.72 1054 5.23 1101 5.75 1145 6.27 1187 6.79 — —
7,500 1036 5.48 1084 6.04 1131 6.61 1174 7.17 — — — —
6,000 954 3.83 1005 4.27 1052 4.72 1098 5.22 1142 5.67 — —
7,000 990 4.74 1040 5.24 1090 5.80 1135 6.30 1176 6.84 — —
40RM*
40RMS 8,000 1028 5.79 1078 6.38 1130 7.00 1173 7.60 — — — —
024 9,000 1073 7.11 1120 7.72 1169 8.37 — — — — — —
10,000 1126 8.75 1166 9.37 — — — — — — — —
6,000 961 3.86 1011 4.31 1058 4.77 1104 5.24 1147 5.71 — —
7,000 1000 4.79 1050 5.32 1097 5.85 1142 6.38 1184 6.91 — —
40RMQ 8,000 1041 5.88 1090 6.47 1137 7.07 1181 7.67 — — — —
024
9,000 1086 7.21 1133 7.82 1178 8.47 — — — — — —
10,000 1138 8.83 1180 9.46 — — — — — — — —
7,500 831 4.41 870 5.10 913 5.90 950 6.88 985 7.70 — —
40RM* 8,750 859 4.97 901 5.59 944 6.42 980 7.20 1020 8.10 — —
40RMS 10,000 900 6.20 939 6.74 976 7.33 1013 8.00 1050 8.82 — —
028 11,250 941 7.73 980 8.32 1017 8.90 1052 9.51 1086 10.16 — —
12,500 984 9.53 1022 10.19 1058 10.84 1093 11.49 — — — —
7,500 874 5.33 897 5.91 940 6.80 990 7.50 — — — —
8,750 886 5.36 930 6.13 982 7.32 1020 8.10 — — — —
40RMQ 10,000 930 6.60 969 7.20 1007 7.89 1045 8.71 — — — —
028 11,250 976 8.25 1014 8.86 1051 9.49 1086 10.17 — — — —
12,500 1023 10.20 1061 10.88 1097 11.56 — — — — — —
9,000 866 5.20 899 5.85 950 6.65 989 7.38 1029 8.32 1077 9.74
10,500 902 6.60 942 7.14 980 7.70 1016 8.31 1051 8.99 1085 9.77
40RM*
40RMS 12,000 949 8.50 988 9.14 1026 9.76 1062 10.38 1095 11.01 — —
034 13,500 1000 10.78 1036 11.49 1073 12.21 — — — — — —
15,000 1057 13.49 1090 14.28 — — — — — — — —
41
FAN PERFORMANCE DATA — 0-300 Pa ESP — 60 Hz, SI
EXTERNAL STATIC PRESSURE (Pa)
AIRFLOW
UNIT 0 50 100 150 200 250 300
(L/s)
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 6.64 0.14 7.56 0.18 9.13 0.26 10.56 0.35 11.88 0.45 13.08 0.55 14.16 0.66
990 7.73 0.21 8.28 0.25 9.71 0.34 11.00 0.44 12.22 0.54 13.37 0.66 14.44 0.78
40RM* 1130 8.30 0.30 9.02 0.35 10.36 0.45 11.55 0.55 12.67 0.66 13.73 0.78 14.76 0.91
007 1270 9.06 0.41 9.79 0.47 11.06 0.58 12.17 0.69 13.20 0.81 14.19 0.94 15.14 1.07
1420 9.91 0.55 10.58 0.61 11.78 0.74 12.83 0.86 13.80 0.99 14.72 1.12 15.61 1.26
1060 4.55 0.06 8.21 0.27 9.67 0.37 10.93 0.46 12.11 0.57 13.23 0.68 14.30 0.81
40RM* 1230 5.37 0.11 8.99 0.38 10.37 0.49 11.55 0.60 12.62 0.71 13.65 0.84 14.64 0.96
40RMQ 1420 9.21 0.48 9.92 0.55 11.22 0.67 12.33 0.80 13.33 0.92 14.27 1.05 15.17 1.19
40RMS 1600 10.25 0.68 10.89 0.75 12.09 0.90 13.15 1.04 14.10 1.18 14.99 1.33 15.83 1.47
008
1770 11.18 0.90 11.76 0.98 12.88 1.14 13.90 1.30 14.82 1.45 15.67 1.61 16.46 1.77
1200 6.58 0.31 8.35 0.40 9.76 0.49 11.00 0.57 12.00 0.65 13.00 0.73 13.90 0.81
1400 7.67 0.44 9.25 0.54 10.60 0.63 11.70 0.71 12.70 0.80 13.60 0.88 14.50 0.96
40RMS 1600 8.77 0.60 10.20 0.70 11.40 0.79 12.50 0.88 13.40 0.97 14.30 1.05 15.20 1.14
010
1800 9.86 0.78 11.10 0.88 12.30 0.98 13.30 1.07 14.20 1.16 15.10 1.25 15.90 1.34
2000 11.00 0.99 12.10 1.09 13.20 1.19 14.10 1.29 15.00 3.38 15.80 1.48 16.60 1.57
1420 6.65 0.22 9.55 0.51 10.89 0.64 12.04 0.77 13.06 0.89 14.02 1.02 14.93 1.15
1650 10.06 0.68 10.69 0.76 11.90 0.91 13.00 1.06 13.97 1.20 14.86 1.35 15.70 1.50
40RM*
40RMS 1890 11.33 0.99 11.88 1.08 12.96 1.25 13.99 1.43 14.93 1.59 15.78 1.76 16.58 1.92
012 2120 12.61 1.38 13.11 1.49 14.08 1.68 15.02 1.88 15.92 2.07 16.74 2.26 17.51 2.44
2360 13.90 1.87 14.36 1.99 15.23 2.21 16.10 2.42 16.94 2.64 17.73 2.85 18.48 3.06
1420 7.02 0.26 9.86 0.54 11.17 0.67 12.28 0.79 13.29 0.92 14.23 1.05 15.14 1.19
1650 10.44 0.73 11.06 0.80 12.25 0.96 13.31 1.10 14.25 1.25 15.13 1.39 15.96 1.54
40RMQ 1890 11.76 1.06 12.31 1.15 13.38 1.32 14.37 1.49 15.28 1.66 16.11 1.83 16.89 1.99
012 2120 13.10 1.48 13.59 1.58 14.55 1.78 15.48 1.97 16.34 2.17 17.14 2.35 17.89 2.54
2360 14.45 2.01 14.89 2.12 15.76 2.34 16.62 2.56 17.43 2.77 18.20 2.98 18.92 3.19
1770 6.57 0.30 7.54 0.39 9.31 0.60 10.72 0.82 11.95 1.04 13.09 1.27 14.13 1.52
2030 7.27 0.43 8.11 0.52 9.76 0.75 11.16 1.00 12.36 1.25 13.44 1.50 14.45 1.76
40RM*
40RMS 2360 8.20 0.64 8.92 0.74 10.38 0.98 11.73 1.26 12.91 1.55 13.97 1.84 14.93 2.13
014 2690 9.16 0.92 9.79 1.02 11.07 1.27 12.33 1.58 13.48 1.90 14.53 2.23 15.48 2.56
2950 9.93 1.18 10.50 1.30 11.66 1.56 12.83 1.87 13.95 2.22 14.98 2.58 15.92 2.94
2120 7.13 0.44 7.91 0.52 9.50 0.74 10.94 0.99 12.17 1.25 13.26 1.51 14.26 1.77
2500 8.13 0.68 8.80 0.78 10.15 1.00 11.48 1.27 12.70 1.57 13.78 1.87 14.76 2.18
40RM*
40RMS 2830 9.03 0.96 9.63 1.07 10.81 1.30 12.01 1.58 13.18 1.90 14.25 2.24 15.23 2.58
016 3210 10.07 1.37 10.62 1.48 11.66 1.73 12.71 2.01 13.77 2.35 14.80 2.71 15.76 3.09
3540 10.99 1.81 11.50 1.93 12.45 2.20 13.40 2.49 14.35 2.83 15.31 3.20 16.24 3.60
2120 7.28 0.45 8.05 0.54 9.60 0.75 11.00 1.00 12.21 1.26 13.28 1.51 14.27 1.78
2500 8.32 0.71 8.97 0.80 10.29 1.02 11.59 1.30 12.78 1.59 13.84 1.89 14.80 2.19
40RMQ 2830 9.25 1.00 9.83 1.10 10.99 1.33 12.16 1.62 13.29 1.93 14.34 2.27 15.30 2.60
016 3210 10.33 1.42 10.85 1.54 11.87 1.78 12.90 2.07 13.93 2.40 14.93 2.76 15.87 3.14
3540 11.29 1.88 11.77 2.01 12.69 2.27 13.62 2.56 14.56 2.90 15.49 3.27 16.40 3.67
2830 8.86 0.94 9.48 1.04 10.65 1.26 11.84 1.53 13.01 1.85 14.10 2.19 15.08 2.53
3300 10.14 1.44 10.69 1.56 11.70 1.81 12.71 2.08 13.73 2.41 14.74 2.77 15.71 3.15
40RM*
40RMS 3780 11.43 2.11 11.93 2.25 12.84 2.52 13.71 2.81 14.60 3.14 15.49 3.51 16.39 3.91
024 4250 12.74 2.96 13.19 3.12 14.02 3.43 14.81 3.74 15.59 4.08 16.37 4.45 17.17 4.85
4720 14.05 4.01 14.47 4.19 15.23 4.54 15.96 4.88 16.66 5.24 17.36 5.62 18.07 6.03
2830 9.03 0.96 9.62 1.06 10.77 1.29 11.94 1.56 13.08 1.87 14.15 2.20 15.12 2.54
3300 10.34 1.48 10.86 1.60 11.85 1.85 12.84 2.12 13.85 2.45 14.84 2.80 15.78 3.18
40RMQ 3780 11.67 2.17 12.14 2.31 13.02 2.58 13.88 2.87 14.75 3.20 15.63 3.56 16.50 3.96
024 4250 13.01 3.05 13.44 3.21 14.23 3.51 15.00 3.82 15.77 4.16 16.54 4.53 17.32 4.94
4720 14.36 4.15 14.75 4.32 15.48 4.66 16.18 4.99 16.87 5.35 17.56 5.73 18.26 6.14
3540 7.60 0.96 8.16 1.09 9.27 1.38 10.34 1.68 11.30 1.97 12.15 2.28 12.97 2.68
4130 8.68 1.47 9.18 1.62 10.13 1.94 11.07 2.29 11.99 2.63 12.84 2.97 13.60 3.32
40RM*
40RMS 4720 9.78 2.15 10.23 2.32 11.07 2.67 11.89 3.05 12.72 3.45 13.53 3.84 14.29 4.23
028 5310 10.89 3.01 11.30 3.20 12.06 3.59 12.80 4.00 13.53 4.43 14.27 4.88 14.99 5.33
5900 12.00 4.07 12.38 4.29 13.09 4.72 13.75 5.17 14.41 5.63 15.07 6.11 15.74 6.61
3540 7.94 1.04 8.51 1.18 9.65 1.48 10.73 1.79 11.68 2.10 12.53 2.46 13.40 2.95
4130 9.08 1.59 9.57 1.75 10.55 2.10 11.52 2.46 12.45 2.81 13.28 3.17 14.04 3.55
40RMQ 4720 10.24 2.33 10.68 2.51 11.53 2.88 12.39 3.29 13.24 3.70 14.05 4.11 14.80 4.51
028 5310 11.42 3.26 11.81 3.46 12.57 3.88 13.33 4.32 14.09 4.77 14.85 5.24 15.58 5.70
5900 12.60 4.42 12.96 4.64 13.65 5.09 14.33 5.57 15.01 6.07 15.70 6.58 16.38 7.10
4250 8.68 1.48 9.17 1.68 10.27 2.07 11.27 2.41 12.19 2.77 13.03 3.13 13.81 3.50
4960 9.93 2.35 10.38 2.53 11.21 2.90 11.99 3.28 12.78 3.68 13.56 4.10 14.32 4.51
40RM*
40RMS 5660 11.21 3.45 11.63 3.66 12.38 4.07 13.08 4.49 13.76 4.93 14.45 5.39 15.14 5.87
034 6370 12.51 4.85 12.89 5.08 13.58 5.54 14.22 6.01 14.83 6.49 15.44 6.99 16.05 7.51
7080 13.82 6.59 14.17 6.85 14.81 7.36 15.40 7.88 15.97 8.40 16.52 8.94 17.06 9.49

42
AIRFLOW
UNIT 350 400 450 500 550 600
(L/s)
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 15.16 0.78 16.08 0.89 16.94 1.01 17.74 1.13 18.51 1.26 19.25 1.39
990 15.44 0.90 16.38 1.03 17.25 1.16 18.07 1.30 18.84 1.43 19.58 1.57
40RM* 1130 15.73 1.05 16.65 1.19 17.53 1.33 18.36 1.48 19.14 1.62 19.89 1.77
007
1270 16.07 1.21 16.96 1.36 17.82 1.51 18.64 1.67 19.42 1.83 — —
1420 16.48 1.41 17.32 1.56 18.14 1.72 18.94 1.89 19.71 2.06 — —
1060 15.31 0.94 16.25 1.07 17.14 1.20 17.98 1.34 18.77 1.48 19.53 1.63
40RM* 1230 15.60 1.10 16.51 1.24 17.39 1.39 18.23 1.54 19.03 1.70 19.80 1.86
40RMQ 1420 16.05 1.33 16.90 1.48 17.74 1.64 18.54 1.80 19.32 1.97 — —
40RMS 1600 16.64 1.62 17.42 1.78 18.20 1.94 18.95 2.11 19.69 2.29 — —
008
1770 17.23 1.93 17.97 2.09 18.70 2.26 19.41 2.44 — — — —
1200 14.70 0.89 15.50 0.97 16.30 1.05 17.00 1.12 17.70 1.20 — —
1400 15.30 1.05 16.10 1.13 16.80 1.21 17.50 1.29 18.20 1.37 — —
40RMS 1600 16.00 1.23 16.70 1.31 17.40 1.40 18.10 1.48 18.80 1.57 — —
010
1800 16.60 1.43 17.40 1.52 18.10 1.61 18.70 1.70 19.40 1.79 — —
2000 17.30 1.66 18.00 1.76 18.70 1.85 19.40 1.94 — — — —
1420 15.81 1.29 16.67 1.44 17.51 1.60 18.32 1.76 19.11 1.92 19.87 2.09
1650 16.51 1.65 17.29 1.80 18.05 1.97 18.80 2.13 19.53 2.31 — —
40RM*
40RMS 1890 17.34 2.09 18.06 2.26 18.77 2.43 19.45 2.61 — — — —
012 2120 18.24 2.63 18.93 2.82 19.59 3.00 — — — — — —
2360 19.18 3.27 19.85 3.48 — — — — — — — —
1420 16.02 1.33 16.87 1.48 17.71 1.64 18.52 1.80 19.30 1.97 — —
1650 16.76 1.70 17.53 1.85 18.29 2.02 19.04 2.19 19.77 2.37 — —
40RMQ 1890 17.64 2.16 18.35 2.33 19.05 2.51 19.74 2.69 — — — —
012 2120 18.60 2.73 19.28 2.91 19.93 3.10 — — — — — —
2360 19.61 3.40 — — — — — — — — — —
1770 15.15 1.77 16.13 2.04 17.10 2.33 18.00 2.62 18.85 2.92 19.68 3.22
2030 15.41 2.04 16.34 2.32 17.24 2.62 18.07 2.92 18.92 3.24 19.73 3.56
40RM*
40RMS 2360 15.84 2.43 16.70 2.74 17.54 3.05 18.35 3.38 19.14 3.71 19.83 4.06
014 2690 16.36 2.89 17.19 3.23 17.98 3.57 18.75 3.92 19.49 4.27 — —
2950 16.79 3.30 17.61 3.66 18.39 4.03 19.13 4.40 19.84 4.77 — —
2120 15.20 2.05 16.12 2.33 16.98 2.62 17.83 2.92 18.67 3.24 19.47 3.57
2500 15.67 2.49 16.53 2.80 17.35 3.12 18.13 3.44 18.90 3.77 19.65 4.12
40RM*
40RMS 2830 16.13 2.92 16.97 3.27 17.77 3.62 18.53 3.97 19.26 4.33 19.97 4.69
016 3210 16.66 3.48 17.50 3.87 18.29 4.26 19.03 4.65 19.75 5.04 — —
3540 17.13 4.02 17.97 4.45 18.75 4.88 19.50 5.30 — — — —
2120 15.21 2.05 16.11 2.33 16.98 2.62 17.83 2.93 18.66 3.24 19.47 3.57
2500 15.69 2.49 16.54 2.80 17.35 3.12 18.14 3.44 18.90 3.77 19.64 4.11
40RMQ 2830 16.18 2.94 17.01 3.28 17.79 3.63 18.54 3.97 19.27 4.33 19.97 4.69
016 3210 16.75 3.52 17.57 3.90 18.34 4.29 19.08 4.67 19.78 5.06 — —
3540 17.26 4.09 18.07 4.50 18.84 4.93 19.57 5.35 — — — —
2830 15.90 2.86 16.75 3.18 17.53 3.52 18.30 3.89 19.03 4.23 — —
3300 16.50 3.53 17.33 3.91 18.17 4.32 18.92 4.70 19.60 5.10 — —
40RM*
40RMS 3780 17.13 4.32 17.97 4.76 18.83 5.22 19.55 5.67 — — — —
024 4250 17.88 5.30 18.67 5.76 19.48 6.24 — — — — — —
4720 18.77 6.52 19.43 6.99 — — — — — — — —
2830 16.01 2.88 16.85 3.22 17.64 3.56 18.39 3.91 19.12 4.26 — —
3300 16.67 3.57 17.50 3.96 18.28 4.36 19.03 4.75 19.73 5.15 — —
40RMQ 3780 17.35 4.39 18.17 4.82 18.95 5.27 19.68 5.72 — — — —
024 4250 18.11 5.37 18.88 5.83 19.63 6.31 — — — — — —
4720 18.96 6.58 19.67 7.05 — — — — — — — —
3540 13.85 3.29 14.50 3.80 15.22 4.40 15.83 5.13 16.42 5.74 — —
4130 14.31 3.71 15.01 4.17 15.74 4.79 16.33 5.37 17.00 6.04 — —
40RM*
40RMS 4720 14.99 4.62 15.65 5.02 16.27 5.46 16.88 5.97 17.50 6.57 — —
028 5310 15.68 5.77 16.34 6.20 16.95 6.64 17.53 7.09 18.09 7.58 — —
5900 16.39 7.10 17.03 7.60 17.64 8.08 18.22 8.57 — — — —
3540 14.57 3.97 14.95 4.41 15.67 5.07 16.50 5.59 — — — —
4130 14.76 3.99 15.51 4.57 16.36 5.46 17.00 6.04 — — — —
40RMQ 4720 15.49 4.92 16.15 5.37 16.78 5.88 17.42 6.50 — — — —
028 5310 16.26 6.15 16.91 6.61 17.51 7.08 18.10 7.58 — — — —
5900 17.04 7.61 17.68 8.11 18.28 8.62 — — — — — —
4250 14.43 3.88 14.98 4.36 15.84 4.96 16.48 5.50 17.16 6.21 17.96 7.26
4960 15.04 4.92 15.71 5.32 16.33 5.74 16.93 6.20 17.51 6.70 18.09 7.29
40RM*
40RMS 5660 15.81 6.34 16.47 6.81 17.10 7.28 17.69 7.74 18.26 8.21 — —
034 6370 16.66 8.04 17.27 8.57 17.88 9.10 — — — — — —
7080 17.61 10.06 18.16 10.64 — — — — — — — —

43
AIRFLOW
UNIT 0 50 100 150 200 250 300
(L/s)
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 6.64 0.14 7.56 0.18 9.13 0.26 10.56 0.35 11.88 0.45 13.08 0.55 14.16 0.66
990 7.43 0.21 8.28 0.25 9.71 0.34 11.00 0.44 12.22 0.54 13.37 0.66 14.44 0.78
40RM* 1130 8.30 0.30 9.02 0.35 10.36 0.45 11.55 0.55 12.67 0.66 13.73 0.78 14.76 0.91
007 1270 9.06 0.41 9.79 0.47 11.06 0.58 12.17 0.69 13.20 0.81 14.19 0.94 15.14 1.07
1420 9.91 0.55 10.58 0.61 11.78 0.74 12.83 0.86 13.80 0.99 14.72 1.12 15.61 1.26
1060 4.55 0.06 8.21 0.27 9.67 0.37 10.93 0.46 12.11 0.57 13.23 0.68 14.30 0.81
40RM* 1230 5.37 0.11 8.99 0.38 10.37 0.49 11.55 0.60 12.62 0.71 13.65 0.84 14.64 0.96
40RMQ 1420 9.21 0.48 9.92 0.55 11.22 0.67 12.33 0.80 13.33 0.92 14.27 1.05 15.17 1.19
40RMS 1600 10.25 0.68 10.89 0.75 12.09 0.90 13.15 1.04 14.10 1.18 14.99 1.33 15.83 1.47
008
1770 11.18 0.90 11.76 0.98 12.88 1.14 13.90 1.30 14.82 1.45 15.67 1.61 16.46 1.77
1200 6.58 0.31 8.35 0.40 9.76 0.49 11.00 0.57 12.00 0.65 13.00 0.73 13.90 0.81
1400 7.67 0.44 9.25 0.54 10.60 0.63 11.70 0.71 12.70 0.80 13.60 0.88 14.50 0.96
40RMS 1600 8.77 0.60 10.20 0.70 11.40 0.79 12.50 0.88 13.40 0.97 14.30 1.05 15.20 1.14
010
1800 9.86 0.78 11.10 0.88 12.30 0.98 13.30 1.07 14.20 1.16 15.10 1.25 15.90 1.34
2000 11.00 0.99 12.10 1.09 13.20 1.19 14.10 1.29 15.00 3.38 15.80 1.48 16.60 1.57
1420 6.65 0.22 9.55 0.51 10.89 0.64 12.04 0.77 13.06 0.89 14.02 1.02 14.93 1.15
1650 10.06 0.68 10.69 0.76 11.90 0.91 13.00 1.06 13.97 1.20 14.86 1.35 15.70 1.50
40RM*
40RMS 1890 11.33 0.99 11.88 1.08 12.96 1.25 13.99 1.43 14.93 1.59 15.78 1.76 16.58 1.92
012 2120 12.61 1.38 13.11 1.49 14.08 1.68 15.02 1.88 15.92 2.07 16.74 2.26 17.51 2.44
2360 13.90 1.87 14.36 1.99 15.23 2.21 16.10 2.42 16.94 2.64 17.73 2.85 18.48 3.06
1420 7.02 0.26 9.86 0.54 11.17 0.67 12.28 0.79 13.29 0.92 14.23 1.05 15.14 1.19
1650 10.44 0.73 11.06 0.80 12.25 0.96 13.31 1.10 14.25 1.25 15.13 1.39 15.96 1.54
40RMQ 1890 11.76 1.06 12.31 1.15 13.38 1.32 14.37 1.49 15.28 1.66 16.11 1.83 16.89 1.99
012 2120 13.10 1.48 13.59 1.58 14.55 1.78 15.48 1.97 16.34 2.17 17.14 2.35 17.89 2.54
2360 14.45 2.01 14.89 2.12 15.76 2.34 16.62 2.56 17.43 2.77 18.20 2.98 18.92 3.19
1770 6.57 0.30 7.54 0.39 9.31 0.60 10.72 0.82 11.95 1.04 13.09 1.27 14.13 1.52
2030 7.27 0.43 8.11 0.52 9.76 0.75 11.16 1.00 12.36 1.25 13.44 1.50 14.45 1.76
40RM*
40RMS 2360 8.20 0.64 8.92 0.74 10.38 0.98 11.73 1.26 12.91 1.55 13.97 1.84 14.93 2.13
014 2690 9.16 0.92 9.79 1.02 11.07 1.27 12.33 1.58 13.48 1.90 14.53 2.23 15.48 2.56
2950 9.93 1.18 10.50 1.30 11.66 1.56 12.83 1.87 13.95 2.22 14.98 2.58 15.92 2.94
2120 7.13 0.44 7.91 0.52 9.50 0.74 10.94 0.99 12.17 1.25 13.26 1.51 14.26 1.77
2500 8.13 0.68 8.80 0.78 10.15 1.00 11.48 1.27 12.70 1.57 13.78 1.87 14.76 2.18
40RM*
40RMS 2830 9.03 0.96 9.63 1.07 10.81 1.30 12.01 1.58 13.18 1.90 14.25 2.24 15.23 2.58
016 3210 10.07 1.37 10.62 1.48 11.66 1.73 12.71 2.01 13.77 2.35 14.80 2.71 15.76 3.09
3540 10.99 1.81 11.50 1.93 12.45 2.20 13.40 2.49 14.35 2.83 15.31 3.20 16.24 3.60
2120 7.28 0.45 8.05 0.54 9.60 0.75 11.00 1.00 12.21 1.26 13.28 1.51 14.27 1.78
2500 8.32 0.71 8.97 0.80 10.29 1.02 11.59 1.30 12.78 1.59 13.84 1.89 14.80 2.19
40RMQ 2830 9.25 1.00 9.83 1.10 10.99 1.33 12.16 1.62 13.29 1.93 14.34 2.27 15.30 2.60
016 3210 10.33 1.42 10.85 1.54 11.87 1.78 12.90 2.07 13.93 2.40 14.93 2.76 15.87 3.14
3540 11.29 1.88 11.77 2.01 12.69 2.27 13.62 2.56 14.56 2.90 15.49 3.27 16.40 3.67
2830 8.86 0.94 9.48 1.04 10.65 1.26 11.84 1.53 13.01 1.85 14.10 2.19 15.08 2.53
3300 10.14 1.44 10.69 1.56 11.70 1.81 12.71 2.08 13.73 2.41 14.74 2.77 15.71 3.15
40RM*
40RMS 3780 11.43 2.11 11.93 2.25 12.84 2.52 13.71 2.81 14.60 3.14 15.49 3.51 16.39 3.91
024 4250 12.74 2.96 13.19 3.12 14.02 3.43 14.81 3.74 15.59 4.08 16.37 4.45 17.17 4.85
4720 14.05 4.01 14.47 4.19 15.23 4.54 15.96 4.88 16.66 5.24 17.36 5.62 18.07 6.03
2830 9.03 0.96 9.62 1.06 10.77 1.29 11.94 1.56 13.08 1.87 14.15 2.20 15.12 2.54
3300 10.34 1.48 10.86 1.60 11.85 1.85 12.84 2.12 13.85 2.45 14.84 2.80 15.78 3.18
40RMQ 3780 11.67 2.17 12.14 2.31 13.02 2.58 13.88 2.87 14.75 3.20 15.63 3.56 16.50 3.96
024 4250 13.01 3.05 13.44 3.21 14.23 3.51 15.00 3.82 15.77 4.16 16.54 4.53 17.32 4.94
4720 14.36 4.15 14.75 4.32 15.48 4.66 16.18 4.99 16.87 5.35 17.56 5.73 18.26 6.14
3540 7.60 0.96 8.16 1.09 9.27 1.38 10.34 1.68 11.30 1.97 12.15 2.28 12.97 2.68
4130 8.68 1.47 9.18 1.62 10.13 1.94 11.07 2.29 11.99 2.63 12.84 2.97 13.60 3.32
40RM*
40RMS 4720 9.78 2.15 10.23 2.32 11.07 2.67 11.89 3.05 12.72 3.45 13.53 3.84 14.29 4.23
028 5310 10.89 3.01 11.30 3.20 12.06 3.59 12.80 4.00 13.53 4.43 14.27 4.88 14.99 5.33
5900 12.00 4.07 12.38 4.29 13.09 4.72 13.75 5.17 14.41 5.63 15.07 6.11 15.74 6.61
3540 7.94 1.04 8.51 1.18 9.65 1.48 10.73 1.79 11.68 2.10 12.53 2.46 13.40 2.95
4130 9.08 1.59 9.57 1.75 10.55 2.10 11.52 2.46 12.45 2.81 13.28 3.17 14.04 3.55
40RMQ 4720 10.24 2.33 10.68 2.51 11.53 2.88 12.39 3.29 13.24 3.70 14.05 4.11 14.80 4.51
028 5310 11.42 3.26 11.81 3.46 12.57 3.88 13.33 4.32 14.09 4.77 14.85 5.24 15.58 5.70
5900 12.60 4.42 12.96 4.64 13.65 5.09 14.33 5.57 15.01 6.07 15.70 6.58 16.38 7.10
4250 8.68 1.48 9.17 1.68 10.27 2.07 11.27 2.41 12.19 2.77 13.03 3.13 13.81 3.50
4960 9.93 2.35 10.38 2.53 11.21 2.90 11.99 3.28 12.78 3.68 13.56 4.10 14.32 4.51
40RM*
40RMS 5660 11.21 3.45 11.63 3.66 12.38 4.07 13.08 4.49 13.76 4.93 14.45 5.39 15.14 5.87
034 6370 12.51 4.85 12.89 5.08 13.58 5.54 14.22 6.01 14.83 6.49 15.44 6.99 16.05 7.51
7080 13.82 6.59 14.17 6.85 14.81 7.36 15.40 7.88 15.97 8.40 16.52 8.94 17.06 9.49

44
AIRFLOW
UNIT 350 400 450 500 550 600
(L/s)
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 15.16 0.78 16.08 0.89 16.94 1.01 17.74 1.13 18.51 1.26 19.25 1.39
990 15.44 0.90 16.38 1.03 17.25 1.16 18.07 1.30 18.84 1.43 19.58 1.57
40RM* 1130 15.73 1.05 16.65 1.19 17.53 1.33 18.36 1.48 19.14 1.62 19.89 1.77
007
1270 16.07 1.21 16.96 1.36 17.82 1.51 18.64 1.67 19.42 1.83 — —
1420 16.48 1.41 17.32 1.56 18.14 1.72 18.94 1.89 19.71 2.06 — —
1060 15.31 0.94 16.25 1.07 17.14 1.20 17.98 1.34 18.77 1.48 19.53 1.63
40RM* 1230 15.60 1.10 16.51 1.24 17.39 1.39 18.23 1.54 19.03 1.70 19.80 1.86
40RMQ 1420 16.05 1.33 16.90 1.48 17.74 1.64 18.54 1.80 19.32 1.97 — —
40RMS 1600 16.64 1.62 17.42 1.78 18.20 1.94 18.95 2.11 19.69 2.29 — —
008
1770 17.23 1.93 17.97 2.09 18.70 2.26 19.41 2.44 — — — —
1200 14.70 0.89 15.50 0.97 16.30 1.05 17.00 1.12 17.70 1.20 — —
1400 15.30 1.05 16.10 1.13 16.80 1.21 17.50 1.29 18.20 1.37 — —
40RMS 1600 16.00 1.23 16.70 1.31 17.40 1.40 18.10 1.48 18.80 1.57 — —
010
1800 16.60 1.43 17.40 1.52 18.10 1.61 18.70 1.70 19.40 1.79 — —
2000 17.30 1.66 18.00 1.76 18.70 1.85 19.40 1.94 — — — —
1420 15.81 1.29 16.67 1.44 17.51 1.60 18.32 1.76 19.11 1.92 19.87 2.09
1650 16.51 1.65 17.29 1.80 18.05 1.97 18.80 2.13 19.53 2.31 — —
40RM*
40RMS 1890 17.34 2.09 18.06 2.26 18.77 2.43 19.45 2.61 — — — —
012 2120 18.24 2.63 18.93 2.82 19.59 3.00 — — — — — —
2360 19.18 3.27 19.85 3.48 — — — — — — — —
1420 16.02 1.33 16.87 1.48 17.71 1.64 18.52 1.80 19.30 1.97 — —
1650 16.76 1.70 17.53 1.85 18.29 2.02 19.04 2.19 19.77 2.37 — —
40RMQ 1890 17.64 2.16 18.35 2.33 19.05 2.51 19.74 2.69 — — — —
012 2120 18.60 2.73 19.28 2.91 19.93 3.10 — — — — — —
2360 19.61 3.40 — — — — — — — — — —
1770 15.15 1.77 16.13 2.04 17.10 2.33 18.00 2.62 18.85 2.92 19.68 3.22
2030 15.41 2.04 16.34 2.32 17.24 2.62 18.07 2.92 18.92 3.24 19.73 3.56
40RM*
40RMS 2360 15.84 2.43 16.70 2.74 17.54 3.05 18.35 3.38 19.14 3.71 19.83 4.06
014 2690 16.36 2.89 17.19 3.23 17.98 3.57 18.75 3.92 19.49 4.27 — —
2950 16.79 3.30 17.61 3.66 18.39 4.03 19.13 4.40 19.84 4.77 — —
2120 15.20 2.05 16.12 2.33 16.98 2.62 17.83 2.92 18.67 3.24 19.47 3.57
2500 15.67 2.49 16.53 2.80 17.35 3.12 18.13 3.44 18.90 3.77 19.65 4.12
40RM*
40RMS 2830 16.13 2.92 16.97 3.27 17.77 3.62 18.53 3.97 19.26 4.33 19.97 4.69
016 3210 16.66 3.48 17.50 3.87 18.29 4.26 19.03 4.65 19.75 5.04 — —
3540 17.13 4.02 17.97 4.45 18.75 4.88 19.50 5.30 — — — —
2120 15.21 2.05 16.11 2.33 16.98 2.62 17.83 2.93 18.66 3.24 19.47 3.57
2500 15.69 2.49 16.54 2.80 17.35 3.12 18.14 3.44 18.90 3.77 19.64 4.11
40RMQ 2830 16.18 2.94 17.01 3.28 17.79 3.63 18.54 3.97 19.27 4.33 19.97 4.69
016 3210 16.75 3.52 17.57 3.90 18.34 4.29 19.08 4.67 19.78 5.06 — —
3540 17.26 4.09 18.07 4.50 18.84 4.93 19.57 5.35 — — — —
2830 15.90 2.86 16.75 3.18 17.53 3.52 18.30 3.89 19.03 4.23 — —
3300 16.50 3.53 17.33 3.91 18.17 4.32 18.92 4.70 19.60 5.10 — —
40RM*
40RMS 3780 17.13 4.32 17.97 4.76 18.83 5.22 19.55 5.67 — — — —
024 4250 17.88 5.30 18.67 5.76 19.48 6.24 — — — — — —
4720 18.77 6.52 19.43 6.99 — — — — — — — —
2830 16.01 2.88 16.85 3.22 17.64 3.56 18.39 3.91 19.12 4.26 — —
3300 16.67 3.57 17.50 3.96 18.28 4.36 19.03 4.75 19.73 5.15 — —
40RMQ 3780 17.35 4.39 18.17 4.82 18.95 5.27 19.68 5.72 — — — —
024 4250 18.11 5.37 18.88 5.83 19.63 6.31 — — — — — —
4720 18.96 6.58 19.67 7.05 — — — — — — — —
3540 13.85 3.29 14.50 3.80 15.22 4.40 15.83 5.13 16.42 5.74 — —
4130 14.31 3.71 15.01 4.17 15.74 4.79 16.33 5.37 17.00 6.04 — —
40RM*
40RMS 4720 14.99 4.62 15.65 5.02 16.27 5.46 16.88 5.97 17.50 6.57 — —
028 5310 15.68 5.77 16.34 6.20 16.95 6.64 17.53 7.09 18.09 7.58 — —
5900 16.39 7.10 17.03 7.60 17.64 8.08 18.22 8.57 — — — —
3540 14.57 3.97 14.95 4.41 15.67 5.07 16.50 5.59 — — — —
4130 14.76 3.99 15.51 4.57 16.36 5.46 17.00 6.04 — — — —
40RMQ 4720 15.49 4.92 16.15 5.37 16.78 5.88 17.42 6.50 — — — —
028 5310 16.26 6.15 16.91 6.61 17.51 7.08 18.10 7.58 — — — —
5900 17.04 7.61 17.68 8.11 18.28 8.62 — — — — — —
4250 14.43 3.88 14.98 4.36 15.84 4.96 16.48 5.50 17.16 6.21 17.96 7.26
4960 15.04 4.92 15.71 5.32 16.33 5.74 16.93 6.20 17.51 6.70 18.09 7.29
40RM*
40RMS 5660 15.81 6.34 16.47 6.81 17.10 7.28 17.69 7.74 18.26 8.21 — —
034 6370 16.66 8.04 17.27 8.57 17.88 9.10 — — — — — —
7080 17.61 10.06 18.16 10.64 — — — — — — — —

45
FAN PERFORMANCE DATA — 40RM WITH HIGH-CAPACITY COIL —
0.0-1.2 in. wg ESP — 60 Hz, ENGLISH
UNIT EXTERNAL STATIC PRESSURE (in. wg)
40RM AIRFLOW 0.0 0.2 0.4 0.6 0.8 1.0 1.2
(High-Capacity (Cfm)
4-Row Coil) Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 419 0.21 471 0.26 564 0.37 649 0.49 727 0.63 797 0.77 862 0.92
2,100 471 0.31 519 0.37 602 0.49 679 0.62 751 0.77 819 0.92 882 1.09
007 2,400 524 0.44 568 0.51 645 0.64 715 0.79 781 0.94 844 1.11 905 1.28
2,700 578 0.61 619 0.69 690 0.84 755 0.99 816 1.15 875 1.33 932 1.51
3,000 633 0.81 671 0.90 738 1.07 799 1.24 856 1.41 910 1.60 963 1.79
2,250 290 0.10 510 0.39 594 0.51 669 0.65 739 0.79 806 0.95 870 1.12
2,600 349 0.19 561 0.55 640 0.70 709 0.84 773 1.00 834 1.16 893 1.34
008 3,000 579 0.70 621 0.79 695 0.96 759 1.12 818 1.30 874 1.47 928 1.66
3,400 646 0.99 683 1.09 752 1.29 813 1.48 869 1.67 920 1.86 970 2.06
3,750 705 1.31 739 1.42 804 1.63 862 1.85 915 2.05 964 2.26 1011 2.48
3,000 421 0.35 592 0.73 670 0.90 737 1.06 797 1.23 854 1.41 908 1.59
3,500 626 0.98 664 1.08 735 1.28 798 1.48 855 1.67 908 1.87 958 2.07
012 4,000 706 1.42 738 1.54 803 1.77 862 2.00 917 2.23 967 2.45 1014 2.67
4,500 786 1.99 815 2.12 873 2.39 929 2.65 980 2.90 1028 3.16 1073 3.41
5,000 867 2.70 893 2.84 946 3.14 997 3.43 1046 3.72 1092 4.00 1135 4.28
3,750 410 0.43 467 0.55 567 0.83 649 1.12 721 1.41 788 1.72 851 2.05
4,300 455 0.62 504 0.74 599 1.05 679 1.38 748 1.70 811 2.04 871 2.39
014 5,000 514 0.92 556 1.06 641 1.39 718 1.76 786 2.14 847 2.52 903 2.91
5,700 575 1.32 612 1.47 686 1.82 759 2.23 825 2.66 884 3.09 939 3.52
6,250 624 1.71 657 1.87 725 2.24 793 2.66 856 3.12 915 3.59 969 4.06
4,500 437 0.61 483 0.72 576 1.01 660 1.35 732 1.69 797 2.03 856 2.38
5,300 499 0.95 538 1.07 617 1.37 696 1.74 767 2.13 830 2.53 888 2.94
016 6,000 555 1.34 590 1.48 659 1.79 730 2.17 798 2.59 860 3.04 918 3.49
6,800 620 1.91 651 2.06 712 2.39 774 2.78 836 3.22 896 3.71 952 4.21
7,500 677 2.52 706 2.69 761 3.04 817 3.44 873 3.89 929 4.39 984 4.93
6,000 542 1.29 577 1.42 646 1.72 716 2.09 785 2.51 849 2.95 907 3.40
7,000 620 1.99 652 2.15 711 2.48 771 2.85 831 3.28 890 3.76 947 4.27
024 8,000 700 2.92 728 3.10 781 3.46 833 3.85 885 4.29 938 4.78 990 5.32
9,000 781 4.10 806 4.30 854 4.71 900 5.13 946 5.58 993 6.08 1039 6.62
10,000 862 5.56 885 5.79 929 6.24 971 6.70 1012 7.18 1054 7.69 1096 8.24
7,500 476 1.39 510 1.58 579 1.99 644 2.40 701 2.81 752 3.29 804 3.96
8,750 545 2.14 574 2.35 633 2.81 691 3.29 747 3.77 797 4.25 842 4.76
028 10,000 615 3.12 641 3.36 692 3.87 743 4.41 794 4.96 843 5.51 888 6.05
11,250 685 4.37 709 4.64 754 5.20 800 5.79 845 6.40 891 7.02 935 7.64
12,500 756 5.92 778 6.22 819 6.83 860 7.47 901 8.14 942 8.83 983 9.52
9,000 539 2.18 569 2.39 626 2.85 683 3.34 739 3.83 791 4.32 837 4.82
10,500 620 3.37 646 3.62 695 4.13 744 4.68 793 5.25 842 5.83 888 6.41
034 12,000 701 4.94 724 5.22 769 5.80 811 6.40 854 7.04 897 7.69 940 8.36
13,500 783 6.95 804 7.27 844 7.91 883 8.57 920 9.26 958 9.97 996 10.71
15,000 865 9.45 884 9.81 921 10.52 956 11.24 991 11.98 1025 12.75 1059 13.54
46

40RM AIRFLOW 1.4 1.6 1.8 2.0 2.2 2.4
4-Row Coil) Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 921 1.07 975 1.23 1026 1.39 1074 1.55 1120 1.72 1164 1.90
2,100 942 1.26 997 1.43 1048 1.61 1097 1.79 1143 1.97 1186 2.16
007 2,400 963 1.47 1017 1.66 1069 1.85 1118 2.05 1164 2.25 — —
2,700 987 1.71 1039 1.91 1090 2.12 1138 2.33 1185 2.55 — —
3,000 1015 1.99 1065 2.20 1113 2.42 1161 2.65 — — — —
2,250 930 1.29 986 1.47 1039 1.65 1089 1.84 1136 2.03 1181 2.22
2,600 950 1.53 1005 1.72 1057 1.92 1107 2.13 1154 2.33 — —
008 3,000 980 1.86 1031 2.06 1081 2.27 1129 2.49 1175 2.72 — —
3,400 1018 2.26 1065 2.48 1111 2.70 1156 2.93 — — — —
3,750 1057 2.69 1101 2.92 1144 3.15 1186 3.39 — — — —
3,000 961 1.78 1012 1.98 1062 2.19 1111 2.41 1158 2.64 — —
3,500 1005 2.27 1052 2.49 1098 2.71 1142 2.94 1186 3.18 — —
012 4,000 1058 2.90 1101 3.13 1143 3.36 1184 3.60 — — — —
4,500 1116 3.66 1157 3.91 1196 4.16 — — — — — —
5,000 1176 4.56 — — — — — — — — — —
3,750 912 2.39 971 2.76 1028 3.14 1083 3.54 1135 3.95 1185 4.36
4,300 928 2.75 982 3.13 1036 3.53 1087 3.94 1138 4.37 1187 4.81
014 5,000 956 3.30 1007 3.71 1056 4.13 1104 4.56 1151 5.00 1196 5.46
5,700 990 3.96 1039 4.40 1086 4.85 1130 5.31 1174 5.78 — —
6,250 1019 4.54 1067 5.02 1112 5.50 1156 5.99 1198 6.49 — —
4,500 912 2.75 967 3.12 1019 3.52 1070 3.92 1120 4.35 1168 4.79
5,300 942 3.34 992 3.76 1041 4.18 1088 4.61 1134 5.06 1179 5.52
016 6,000 971 3.95 1020 4.40 1067 4.86 1112 5.33 1156 5.81 1198 6.29
6,800 1005 4.72 1054 5.23 1101 5.75 1145 6.27 1187 6.79 — —
7,500 1036 5.48 1084 6.04 1131 6.61 1174 7.17 — — — —
6,000 961 3.86 1011 4.31 1058 4.77 1104 5.24 1147 5.71 — —
7,000 1000 4.79 1050 5.32 1097 5.85 1142 6.38 1184 6.91 — —
024 8,000 1041 5.88 1090 6.47 1137 7.07 1181 7.67 — — — —
9,000 1086 7.21 1133 7.82 1178 8.47 — — — — — —
10,000 1138 8.83 1180 9.46 — — — — — — — —
7,500 874 5.33 897 5.91 940 6.80 990 7.50 — — — —
8,750 886 5.36 930 6.13 982 7.32 1020 8.10 — — — —
028 10,000 930 6.60 969 7.20 1007 7.89 1045 8.71 — — — —
11,250 976 8.25 1014 8.86 1051 9.49 1086 10.17 — — — —
12,500 1023 10.20 1061 10.88 1097 11.56 — — — — — —
9,000 881 5.37 923 6.03 967 6.89 1020 8.25 — — — —
10,500 930 6.97 970 7.55 1008 8.17 1045 8.86 — — — —
034 12,000 981 9.02 1021 9.67 1058 10.32 1094 10.97 — — — —
13,500 1035 11.45 1072 12.20 — — — — — — — —
15,000 1093 14.35 — — — — — — — — — —
47
40RM AIRFLOW 0.0 0.2 0.4 0.6 0.8 1.0 1.2
4-Row Coil) Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 419 0.21 471 0.26 564 0.37 649 0.49 727 0.63 797 0.77 862 0.92
2,100 471 0.31 519 0.37 602 0.49 679 0.62 751 0.77 819 0.92 882 1.09
007 2,400 524 0.44 568 0.51 645 0.64 715 0.79 781 0.94 844 1.11 905 1.28
2,700 578 0.61 619 0.69 690 0.84 755 0.99 816 1.15 875 1.33 932 1.51
3,000 633 0.81 671 0.90 738 1.07 799 1.24 856 1.41 910 1.60 963 1.79
2,250 290 0.10 510 0.39 594 0.51 669 0.65 739 0.79 806 0.95 870 1.12
2,600 349 0.19 561 0.55 640 0.70 709 0.84 773 1.00 834 1.16 893 1.34
008 3,000 579 0.70 621 0.79 695 0.96 759 1.12 818 1.30 874 1.47 928 1.66
3,400 646 0.99 683 1.09 752 1.29 813 1.48 869 1.67 920 1.86 970 2.06
3,750 705 1.31 739 1.42 804 1.63 862 1.85 915 2.05 964 2.26 1011 2.48
3,000 421 0.35 592 0.73 670 0.90 737 1.06 797 1.23 854 1.41 908 1.59
3,500 626 0.98 664 1.08 735 1.28 798 1.48 855 1.67 908 1.87 958 2.07
012 4,000 706 1.42 738 1.54 803 1.77 862 2.00 917 2.23 967 2.45 1014 2.67
4,500 786 1.99 815 2.12 873 2.39 929 2.65 980 2.90 1028 3.16 1073 3.41
5,000 867 2.70 893 2.84 946 3.14 997 3.43 1046 3.72 1092 4.00 1135 4.28
3,750 410 0.43 467 0.55 567 0.83 649 1.12 721 1.41 788 1.72 851 2.05
4,300 455 0.62 504 0.74 599 1.05 679 1.38 748 1.70 811 2.04 871 2.39
014 5,000 514 0.92 556 1.06 641 1.39 718 1.76 786 2.14 847 2.52 903 2.91
5,700 575 1.32 612 1.47 686 1.82 759 2.23 825 2.66 884 3.09 939 3.52
6,250 624 1.71 657 1.87 725 2.24 793 2.66 856 3.12 915 3.59 969 4.06
4,500 437 0.61 483 0.72 576 1.01 660 1.35 732 1.69 797 2.03 856 2.38
5,300 499 0.95 538 1.07 617 1.37 696 1.74 767 2.13 830 2.53 888 2.94
016 6,000 555 1.34 590 1.48 659 1.79 730 2.17 798 2.59 860 3.04 918 3.49
6,800 620 1.91 651 2.06 712 2.39 774 2.78 836 3.22 896 3.71 952 4.21
7,500 677 2.52 706 2.69 761 3.04 817 3.44 873 3.89 929 4.39 984 4.93
6,000 542 1.29 577 1.42 646 1.72 716 2.09 785 2.51 849 2.95 907 3.40
7,000 620 1.99 652 2.15 711 2.48 771 2.85 831 3.28 890 3.76 947 4.27
024 8,000 700 2.92 728 3.10 781 3.46 833 3.85 885 4.29 938 4.78 990 5.32
9,000 781 4.10 806 4.30 854 4.71 900 5.13 946 5.58 993 6.08 1039 6.62
10,000 862 5.56 885 5.79 929 6.24 971 6.70 1012 7.18 1054 7.69 1096 8.24
7,500 476 1.39 510 1.58 579 1.99 644 2.40 701 2.81 752 3.29 804 3.96
8,750 545 2.14 574 2.35 633 2.81 691 3.29 747 3.77 797 4.25 842 4.76
028 10,000 615 3.12 641 3.36 692 3.87 743 4.41 794 4.96 843 5.51 888 6.05
11,250 685 4.37 709 4.64 754 5.20 800 5.79 845 6.40 891 7.02 935 7.64
12,500 756 5.92 778 6.22 819 6.83 860 7.47 901 8.14 942 8.83 983 9.52
9,000 539 2.18 569 2.39 626 2.85 683 3.34 739 3.83 791 4.32 837 4.82
10,500 620 3.37 646 3.62 695 4.13 744 4.68 793 5.25 842 5.83 888 6.41
034 12,000 701 4.94 724 5.22 769 5.80 811 6.40 854 7.04 897 7.69 940 8.36
13,500 783 6.95 804 7.27 844 7.91 883 8.57 920 9.26 958 9.97 996 10.71
15,000 865 9.45 884 9.81 921 10.52 956 11.24 991 11.98 1025 12.75 1059 13.54
48

40RM AIRFLOW 1.4 1.6 1.8 2.0 2.2 2.4
4-Row Coil) Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 921 1.07 975 1.23 1026 1.39 1074 1.55 1120 1.72 1164 1.90
2,100 942 1.26 997 1.43 1048 1.61 1097 1.79 1143 1.97 1186 2.16
007 2,400 963 1.47 1017 1.66 1069 1.85 1118 2.05 1164 2.25 — —
2,700 987 1.71 1039 1.91 1090 2.12 1138 2.33 1185 2.55 — —
3,000 1015 1.99 1065 2.20 1113 2.42 1161 2.65 — — — —
2,250 930 1.29 986 1.47 1039 1.65 1089 1.84 1136 2.03 1181 2.22
2,600 950 1.53 1005 1.72 1057 1.92 1107 2.13 1154 2.33 — —
008 3,000 980 1.86 1031 2.06 1081 2.27 1129 2.49 1175 2.72 — —
3,400 1018 2.26 1065 2.48 1111 2.70 1156 2.93 — — — —
3,750 1057 2.69 1101 2.92 1144 3.15 1186 3.39 — — — —
3,000 961 1.78 1012 1.98 1062 2.19 1111 2.41 1158 2.64 — —
3,500 1005 2.27 1052 2.49 1098 2.71 1142 2.94 1186 3.18 — —
012 4,000 1058 2.90 1101 3.13 1143 3.36 1184 3.60 — — — —
4,500 1116 3.66 1157 3.91 1196 4.16 — — — — — —
5,000 1176 4.56 — — — — — — — — — —
3,750 912 2.39 971 2.76 1028 3.14 1083 3.54 1135 3.95 1185 4.36
4,300 928 2.75 982 3.13 1036 3.53 1087 3.94 1138 4.37 1187 4.81
014 5,000 956 3.30 1007 3.71 1056 4.13 1104 4.56 1151 5.00 1196 5.46
5,700 990 3.96 1039 4.40 1086 4.85 1130 5.31 1174 5.78 — —
6,250 1019 4.54 1067 5.02 1112 5.50 1156 5.99 1198 6.49 — —
4,500 912 2.75 967 3.12 1019 3.52 1070 3.92 1120 4.35 1168 4.79
5,300 942 3.34 992 3.76 1041 4.18 1088 4.61 1134 5.06 1179 5.52
016 6,000 971 3.95 1020 4.40 1067 4.86 1112 5.33 1156 5.81 1198 6.29
6,800 1005 4.72 1054 5.23 1101 5.75 1145 6.27 1187 6.79 — —
7,500 1036 5.48 1084 6.04 1131 6.61 1174 7.17 — — — —
6,000 961 3.86 1011 4.31 1058 4.77 1104 5.24 1147 5.71 — —
7,000 1000 4.79 1050 5.32 1097 5.85 1142 6.38 1184 6.91 — —
024 8,000 1041 5.88 1090 6.47 1137 7.07 1181 7.67 — — — —
9,000 1086 7.21 1133 7.82 1178 8.47 — — — — — —
10,000 1138 8.83 1180 9.46 — — — — — — — —
7,500 874 5.33 897 5.91 940 6.80 990 7.50 — — — —
8,750 886 5.36 930 6.13 982 7.32 1020 8.10 — — — —
028 10,000 930 6.60 969 7.20 1007 7.89 1045 8.71 — — — —
11,250 976 8.25 1014 8.86 1051 9.49 1086 10.17 — — — —
12,500 1023 10.20 1061 10.88 1097 11.56 — — — — — —
9,000 881 5.37 923 6.03 967 6.89 1020 8.25 — — — —
10,500 930 6.97 970 7.55 1008 8.17 1045 8.86 — — — —
034 12,000 981 9.02 1021 9.67 1058 10.32 1094 10.97 — — — —
13,500 1035 11.45 1072 12.20 — — — — — — — —
15,000 1093 14.35 — — — — — — — — — —
49
0-300 Pa ESP — 60 Hz, SI
UNIT EXTERNAL STATIC PRESSURE (Pa)

40RM AIRFLOW 0 50 100 150 200 250 300
(High-Capacity (L/s)
4-Row Coil) r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 6.98 0.16 7.86 0.19 9.40 0.27 10.81 0.37 12.11 0.47 13.29 0.57 14.36 0.69
990 7.84 0.23 8.64 0.27 10.03 0.36 11.31 0.46 12.52 0.57 13.65 0.69 14.71 0.81
007 1130 8.73 0.33 9.46 0.38 10.75 0.48 11.91 0.59 13.01 0.70 14.07 0.83 15.08 0.96
1270 9.63 0.45 10.31 0.51 11.51 0.62 12.58 0.74 13.60 0.86 14.58 0.99 15.53 1.13
1420 10.55 0.61 11.18 0.67 12.30 0.80 13.31 0.92 14.26 1.05 15.17 1.19 16.05 1.33
1060 4.83 0.07 8.50 0.29 9.91 0.38 11.15 0.48 12.32 0.59 13.44 0.71 14.50 0.83
1230 5.81 0.14 9.35 0.41 10.67 0.52 11.81 0.63 12.88 0.74 13.90 0.87 14.89 1.00
008 1420 9.65 0.52 10.35 0.59 11.59 0.71 12.66 0.84 13.64 0.97 14.57 1.10 15.47 1.24
1600 10.76 0.74 11.39 0.81 12.54 0.96 13.55 1.10 14.48 1.24 15.34 1.39 16.17 1.53
1770 11.74 0.97 12.32 1.06 13.40 1.22 14.37 1.38 15.25 1.53 16.07 1.69 16.86 1.85
1420 7.02 0.26 9.86 0.54 11.17 0.67 12.28 0.79 13.29 0.92 14.23 1.05 15.14 1.19
1650 10.44 0.73 11.06 0.80 12.25 0.96 13.31 1.10 14.25 1.25 15.13 1.39 15.96 1.54
012 1890 11.76 1.06 12.31 1.15 13.38 1.32 14.37 1.49 15.28 1.66 16.11 1.83 16.89 1.99
2120 13.10 1.48 13.59 1.58 14.55 1.78 15.48 1.97 16.34 2.17 17.14 2.35 17.89 2.54
2360 14.45 2.01 14.89 2.12 15.76 2.34 16.62 2.56 17.43 2.77 18.20 2.98 18.92 3.19
1770 6.84 0.32 7.78 0.41 9.46 0.62 10.82 0.83 12.02 1.05 13.13 1.28 14.19 1.53
2030 7.58 0.46 8.40 0.55 9.98 0.78 11.31 1.03 12.47 1.27 13.52 1.52 14.51 1.78
014 2360 8.57 0.69 9.27 0.79 10.68 1.04 11.96 1.31 13.09 1.60 14.11 1.88 15.05 2.17
2690 9.59 0.99 10.20 1.10 11.44 1.36 12.64 1.66 13.74 1.98 14.74 2.30 15.65 2.63
2950 10.40 1.28 10.96 1.39 12.09 1.67 13.21 1.98 14.27 2.33 15.25 2.68 16.15 3.03
2120 7.28 0.45 8.05 0.54 9.60 0.75 11.00 1.00 12.21 1.26 13.28 1.51 14.27 1.78
2500 8.32 0.71 8.97 0.80 10.29 1.02 11.59 1.30 12.78 1.59 13.84 1.89 14.80 2.19
016 2830 9.25 1.00 9.83 1.10 10.99 1.33 12.16 1.62 13.29 1.93 14.34 2.27 15.30 2.60
3210 10.33 1.42 10.85 1.54 11.87 1.78 12.90 2.07 13.93 2.40 14.93 2.76 15.87 3.14
3540 11.29 1.88 11.77 2.01 12.69 2.27 13.62 2.56 14.56 2.90 15.49 3.27 16.40 3.67
2830 9.03 0.96 9.62 1.06 10.77 1.29 11.94 1.56 13.08 1.87 14.15 2.20 15.12 2.54
3300 10.34 1.48 10.86 1.60 11.85 1.85 12.84 2.12 13.85 2.45 14.84 2.80 15.78 3.18
024 3780 11.67 2.17 12.14 2.31 13.02 2.58 13.88 2.87 14.75 3.20 15.63 3.56 16.50 3.96
4250 13.01 3.05 13.44 3.21 14.23 3.51 15.00 3.82 15.77 4.16 16.54 4.53 17.32 4.94
4720 14.36 4.15 14.75 4.32 15.48 4.66 16.18 4.99 16.87 5.35 17.56 5.73 18.26 6.14
3540 7.94 1.04 8.51 1.18 9.65 1.48 10.73 1.79 11.68 2.10 12.53 2.46 13.40 2.95
4130 9.08 1.59 9.57 1.75 10.55 2.10 11.52 2.46 12.45 2.81 13.28 3.17 14.04 3.55
028 4720 10.24 2.33 10.68 2.51 11.53 2.88 12.39 3.29 13.24 3.70 14.05 4.11 14.80 4.51
5310 11.42 3.26 11.81 3.46 12.57 3.88 13.33 4.32 14.09 4.77 14.85 5.24 15.58 5.70
5900 12.60 4.42 12.96 4.64 13.65 5.09 14.33 5.57 15.01 6.07 15.70 6.58 16.38 7.10
4250 8.99 1.62 9.49 1.78 10.44 2.12 11.39 2.49 12.32 2.86 13.18 3.22 13.95 3.59
4960 10.33 2.51 10.77 2.70 11.59 3.08 12.40 3.49 13.22 3.92 14.03 4.35 14.79 4.78
034 5660 11.68 3.68 12.07 3.90 12.81 4.33 13.52 4.77 14.23 5.25 14.95 5.74 15.66 6.23
6370 13.04 5.18 13.40 5.42 14.07 5.90 14.71 6.39 15.34 6.90 15.97 7.44 16.61 7.98
7080 14.42 7.05 14.74 7.31 15.36 7.84 15.94 8.38 16.51 8.93 17.08 9.51 17.65 10.10
50
350-600 Pa ESP — 60 Hz, SI
40RM AIRFLOW 350 400 450 500 550 600
4-Row Coil) r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 15.34 0.80 16.25 0.92 17.10 1.03 17.90 1.16 18.66 1.28 19.39 1.41
990 15.69 0.94 16.61 1.07 17.47 1.20 18.28 1.33 19.04 1.47 19.77 1.61
007 1130 16.04 1.09 16.95 1.23 17.81 1.38 18.63 1.53 19.40 1.67 — —
1270 16.44 1.27 17.32 1.42 18.17 1.58 18.97 1.74 19.75 1.90 — —
1420 16.91 1.49 17.75 1.64 18.56 1.81 19.34 1.97 — — — —
1060 15.50 0.96 16.43 1.10 17.31 1.23 18.14 1.37 18.93 1.51 19.68 1.66
1230 15.84 1.14 16.75 1.28 17.62 1.43 18.45 1.58 19.24 1.74 — —
008 1420 16.34 1.38 17.19 1.54 18.01 1.70 18.81 1.86 19.59 2.03 — —
1600 16.97 1.69 17.76 1.85 18.52 2.02 19.27 2.19 — — — —
1770 17.61 2.01 18.35 2.18 19.07 2.35 19.77 2.53 — — — —
1420 16.02 1.33 16.87 1.48 17.71 1.64 18.52 1.80 19.30 1.97 — —
1650 16.76 1.70 17.53 1.85 18.29 2.02 19.04 2.19 19.77 2.37 — —
012 1890 17.64 2.16 18.35 2.33 19.05 2.51 19.74 2.69 — — — —
2120 18.60 2.73 19.28 2.91 19.93 3.10 — — — — — —
2360 19.61 3.40 — — — — — — — — — —
1770 15.21 1.78 16.19 2.06 17.13 2.34 18.04 2.64 18.91 2.94 19.75 3.25
2030 15.46 2.05 16.37 2.33 17.26 2.63 18.12 2.94 18.96 3.26 19.78 3.59
014 2360 15.94 2.46 16.78 2.77 17.60 3.08 18.40 3.40 19.18 3.73 19.94 4.07
2690 16.51 2.95 17.32 3.28 18.09 3.62 18.84 3.96 19.57 4.31 — —
2950 16.99 3.39 17.78 3.74 18.54 4.10 19.26 4.47 19.96 4.84 — —
2120 15.21 2.05 16.11 2.33 16.98 2.62 17.83 2.93 18.66 3.24 19.47 3.57
2500 15.69 2.49 16.54 2.80 17.35 3.12 18.14 3.44 18.90 3.77 19.64 4.11
016 2830 16.18 2.94 17.01 3.28 17.79 3.63 18.54 3.97 19.27 4.33 19.97 4.69
3210 16.75 3.52 17.57 3.90 18.34 4.29 19.08 4.67 19.78 5.06 — —
3540 17.26 4.09 18.07 4.50 18.84 4.93 19.57 5.35 — — — —
2830 16.01 2.88 16.85 3.22 17.64 3.56 18.39 3.91 19.12 4.26 — —
3300 16.67 3.57 17.50 3.96 18.28 4.36 19.03 4.75 19.73 5.15 — —
024 3780 17.35 4.39 18.17 4.82 18.95 5.27 19.68 5.72 — — — —
4250 18.11 5.37 18.88 5.83 19.63 6.31 — — — — — —
4720 18.96 6.58 19.67 7.05 — — — — — — — —
3540 14.57 3.97 14.95 4.41 15.67 5.07 16.50 5.59 — — — —
4130 14.76 3.99 15.51 4.57 16.36 5.46 17.00 6.04 — — — —
028 4720 15.49 4.92 16.15 5.37 16.78 5.88 17.42 6.50 — — — —
5310 16.26 6.15 16.91 6.61 17.51 7.08 18.10 7.58 — — — —
5900 17.04 7.61 17.68 8.11 18.28 8.62 — — — — — —
4250 14.68 4.00 15.38 4.49 16.12 5.14 17.00 6.15 — — — —
4960 15.51 5.20 16.17 5.63 16.80 6.09 17.41 6.61 — — — —
034 5660 16.35 6.72 17.01 7.21 17.64 7.69 18.23 8.18 — — — —
6370 17.24 8.54 17.87 9.10 — — — — — — — —
7080 18.22 10.70 — — — — — — — — — —
51
0-300 Pa ESP — 50 Hz, SI

40RM AIRFLOW 0 50 100 150 200 250 300
4-Row Coil) r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 6.98 0.16 7.86 0.19 9.40 0.27 10.81 0.37 12.11 0.47 13.29 0.57 14.36 0.69
990 7.84 0.23 8.64 0.27 10.03 0.36 11.31 0.46 12.52 0.57 13.65 0.69 14.71 0.81
007 1130 8.73 0.33 9.46 0.38 10.75 0.48 11.91 0.59 13.01 0.70 14.07 0.83 15.08 0.96
1270 9.63 0.45 10.31 0.51 11.51 0.62 12.58 0.74 13.60 0.86 14.58 0.99 15.53 1.13
1420 10.55 0.61 11.18 0.67 12.30 0.80 13.31 0.92 14.26 1.05 15.17 1.19 16.05 1.33
1060 4.83 0.07 8.50 0.29 9.91 0.38 11.15 0.48 12.32 0.59 13.44 0.71 14.50 0.83
1230 5.81 0.14 9.35 0.41 10.67 0.52 11.81 0.63 12.88 0.74 13.90 0.87 14.89 1.00
008 1420 9.65 0.52 10.35 0.59 11.59 0.71 12.66 0.84 13.64 0.97 14.57 1.10 15.47 1.24
1600 10.76 0.74 11.39 0.81 12.54 0.96 13.55 1.10 14.48 1.24 15.34 1.39 16.17 1.53
1770 11.74 0.97 12.32 1.06 13.40 1.22 14.37 1.38 15.25 1.53 16.07 1.69 16.86 1.85
1420 7.02 0.26 9.86 0.54 11.17 0.67 12.28 0.79 13.29 0.92 14.23 1.05 15.14 1.19
1650 10.44 0.73 11.06 0.80 12.25 0.96 13.31 1.10 14.25 1.25 15.13 1.39 15.96 1.54
012 1890 11.76 1.06 12.31 1.15 13.38 1.32 14.37 1.49 15.28 1.66 16.11 1.83 16.89 1.99
2120 13.10 1.48 13.59 1.58 14.55 1.78 15.48 1.97 16.34 2.17 17.14 2.35 17.89 2.54
2360 14.45 2.01 14.89 2.12 15.76 2.34 16.62 2.56 17.43 2.77 18.20 2.98 18.92 3.19
1770 6.84 0.32 7.78 0.41 9.46 0.62 10.82 0.83 12.02 1.05 13.13 1.28 14.19 1.53
2030 7.58 0.46 8.40 0.55 9.98 0.78 11.31 1.03 12.47 1.27 13.52 1.52 14.51 1.78
014 2360 8.57 0.69 9.27 0.79 10.68 1.04 11.96 1.31 13.09 1.60 14.11 1.88 15.05 2.17
2690 9.59 0.99 10.20 1.10 11.44 1.36 12.64 1.66 13.74 1.98 14.74 2.30 15.65 2.63
2950 10.40 1.28 10.96 1.39 12.09 1.67 13.21 1.98 14.27 2.33 15.25 2.68 16.15 3.03
2120 7.28 0.45 8.05 0.54 9.60 0.75 11.00 1.00 12.21 1.26 13.28 1.51 14.27 1.78
2500 8.32 0.71 8.97 0.80 10.29 1.02 11.59 1.30 12.78 1.59 13.84 1.89 14.80 2.19
016 2830 9.25 1.00 9.83 1.10 10.99 1.33 12.16 1.62 13.29 1.93 14.34 2.27 15.30 2.60
3210 10.33 1.42 10.85 1.54 11.87 1.78 12.90 2.07 13.93 2.40 14.93 2.76 15.87 3.14
3540 11.29 1.88 11.77 2.01 12.69 2.27 13.62 2.56 14.56 2.90 15.49 3.27 16.40 3.67
2830 9.03 0.96 9.62 1.06 10.77 1.29 11.94 1.56 13.08 1.87 14.15 2.20 15.12 2.54
3300 10.34 1.48 10.86 1.60 11.85 1.85 12.84 2.12 13.85 2.45 14.84 2.80 15.78 3.18
024 3780 11.67 2.17 12.14 2.31 13.02 2.58 13.88 2.87 14.75 3.20 15.63 3.56 16.50 3.96
4250 13.01 3.05 13.44 3.21 14.23 3.51 15.00 3.82 15.77 4.16 16.54 4.53 17.32 4.94
4720 14.36 4.15 14.75 4.32 15.48 4.66 16.18 4.99 16.87 5.35 17.56 5.73 18.26 6.14
3540 7.94 1.04 8.51 1.18 9.65 1.48 10.73 1.79 11.68 2.10 12.53 2.46 13.40 2.95
4130 9.08 1.59 9.57 1.75 10.55 2.10 11.52 2.46 12.45 2.81 13.28 3.17 14.04 3.55
028 4720 10.24 2.33 10.68 2.51 11.53 2.88 12.39 3.29 13.24 3.70 14.05 4.11 14.80 4.51
5310 11.42 3.26 11.81 3.46 12.57 3.88 13.33 4.32 14.09 4.77 14.85 5.24 15.58 5.70
5900 12.60 4.42 12.96 4.64 13.65 5.09 14.33 5.57 15.01 6.07 15.70 6.58 16.38 7.10
4250 8.99 1.62 9.49 1.78 10.44 2.12 11.39 2.49 12.32 2.86 13.18 3.22 13.95 3.59
4960 10.33 2.51 10.77 2.70 11.59 3.08 12.40 3.49 13.22 3.92 14.03 4.35 14.79 4.78
034 5660 11.68 3.68 12.07 3.90 12.81 4.33 13.52 4.77 14.23 5.25 14.95 5.74 15.66 6.23
6370 13.04 5.18 13.40 5.42 14.07 5.90 14.71 6.39 15.34 6.90 15.97 7.44 16.61 7.98
7080 14.42 7.05 14.74 7.31 15.36 7.84 15.94 8.38 16.51 8.93 17.08 9.51 17.65 10.10
52
350-600 Pa ESP — 50 Hz, SI
40RM AIRFLOW 350 400 450 500 550 600
4-Row Coil) r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 15.34 0.80 16.25 0.92 17.10 1.03 17.90 1.16 18.66 1.28 19.39 1.41
990 15.69 0.94 16.61 1.07 17.47 1.20 18.28 1.33 19.04 1.47 19.77 1.61
007 1130 16.04 1.09 16.95 1.23 17.81 1.38 18.63 1.53 19.40 1.67 — —
1270 16.44 1.27 17.32 1.42 18.17 1.58 18.97 1.74 19.75 1.90 — —
1420 16.91 1.49 17.75 1.64 18.56 1.81 19.34 1.97 — — — —
1060 15.50 0.96 16.43 1.10 17.31 1.23 18.14 1.37 18.93 1.51 19.68 1.66
1230 15.84 1.14 16.75 1.28 17.62 1.43 18.45 1.58 19.24 1.74 — —
008 1420 16.34 1.38 17.19 1.54 18.01 1.70 18.81 1.86 19.59 2.03 — —
1600 16.97 1.69 17.76 1.85 18.52 2.02 19.27 2.19 — — — —
1770 17.61 2.01 18.35 2.18 19.07 2.35 19.77 2.53 — — — —
1420 16.02 1.33 16.87 1.48 17.71 1.64 18.52 1.80 19.30 1.97 — —
1650 16.76 1.70 17.53 1.85 18.29 2.02 19.04 2.19 19.77 2.37 — —
012 1890 17.64 2.16 18.35 2.33 19.05 2.51 19.74 2.69 — — — —
2120 18.60 2.73 19.28 2.91 19.93 3.10 — — — — — —
2360 19.61 3.40 — — — — — — — — — —
1770 15.21 1.78 16.19 2.06 17.13 2.34 18.04 2.64 18.91 2.94 19.75 3.25
2030 15.46 2.05 16.37 2.33 17.26 2.63 18.12 2.94 18.96 3.26 19.78 3.59
014 2360 15.94 2.46 16.78 2.77 17.60 3.08 18.40 3.40 19.18 3.73 19.94 4.07
2690 16.51 2.95 17.32 3.28 18.09 3.62 18.84 3.96 19.57 4.31 — —
2950 16.99 3.39 17.78 3.74 18.54 4.10 19.26 4.47 19.96 4.84 — —
2120 15.21 2.05 16.11 2.33 16.98 2.62 17.83 2.93 18.66 3.24 19.47 3.57
2500 15.69 2.49 16.54 2.80 17.35 3.12 18.14 3.44 18.90 3.77 19.64 4.11
016 2830 16.18 2.94 17.01 3.28 17.79 3.63 18.54 3.97 19.27 4.33 19.97 4.69
3210 16.75 3.52 17.57 3.90 18.34 4.29 19.08 4.67 19.78 5.06 — —
3540 17.26 4.09 18.07 4.50 18.84 4.93 19.57 5.35 — — — —
2830 16.01 2.88 16.85 3.22 17.64 3.56 18.39 3.91 19.12 4.26 — —
3300 16.67 3.57 17.50 3.96 18.28 4.36 19.03 4.75 19.73 5.15 — —
024 3780 17.35 4.39 18.17 4.82 18.95 5.27 19.68 5.72 — — — —
4250 18.11 5.37 18.88 5.83 19.63 6.31 — — — — — —
4720 18.96 6.58 19.67 7.05 — — — — — — — —
3540 14.57 3.97 14.95 4.41 15.67 5.07 16.50 5.59 — — — —
4130 14.76 3.99 15.51 4.57 16.36 5.46 17.00 6.04 — — — —
028 4720 15.49 4.92 16.15 5.37 16.78 5.88 17.42 6.50 — — — —
5310 16.26 6.15 16.91 6.61 17.51 7.08 18.10 7.58 — — — —
5900 17.04 7.61 17.68 8.11 18.28 8.62 — — — — — —
4250 14.68 4.00 15.38 4.49 16.12 5.14 17.00 6.15 — — — —
4960 15.51 5.20 16.17 5.63 16.80 6.09 17.41 6.61 — — — —
034 5660 16.35 6.72 17.01 7.21 17.64 7.69 18.23 8.18 — — — —
6370 17.24 8.54 17.87 9.10 — — — — — — — —
7080 18.22 10.70 — — — — — — — — — —
53
LEGEND AND NOTES FOR STANDARD AND HIGH- LEGEND AND NOTES FOR STANDARD AND HIGH-
CAPACITY COIL FAN PERFORMANCE DATA TABLES CAPACITY COIL FAN PERFORMANCE DATA TABLES
(English) (SI)
LEGEND LEGEND
Bhp — Brake Horsepower Input to Fan ESP — External Static Pressure
ESP — External Static Pressure Bold indicates field-supplied drive or motor is required.
Bold indicates field-supplied drive or motor is required. Plain type indicates standard motor and standard drive.
Plain type indicates standard motor and standard drive. Underline indicates a different motor and drive combination other than the
Underline indicates a different motor and drive combination other than the standard motor and standard drive combination is required. Refer to fan motor and
standard motor and standard drive combination is required. Refer to fan motor and drive tables, pages 69-76, to complete the selection.
drive tables, pages 69-76, to complete selection. NOTES:
NOTES: 1. Maximum allowable fan speed is 18.3 r/s for unit sizes 028 and 034; 20 r/s
1. Maximum allowable fan speed is 1100 rpm for unit sizes 028 and 034; for all other sizes.
1200 rpm for all other sizes. 2. Fan performance is based on deductions for wet coil, clean 51-mm filters,
2. Fan performance is based on deductions for wet coil, clean 2-in. filters, and and unit casing. See table below for factory-supplied filter pressure drop.
unit casing. See table below for factory-supplied filter pressure drop. 3. For 60 Hz units, the medium-static drive and standard motor combination is
3. For 60 Hz units, the medium-static drive and standard motor combination is not available for 028 size. For 50 Hz units, the medium-static drive and
not available for 028 size. For 50 Hz units, the medium-static drive and standard motor combination is not available for 016-028 sizes. Use alternate
standard motor combination is not available for 016-028 sizes. Use alternate motor if medium-static drive is required for these sizes.
motor if medium-static drive is required for these sizes.
DUCT SOUND POWER LEVELS (Lw)
OCTAVE BAND CENTER FREQUENCY (Hz)
MODEL SIZE CFM dB(A)
63 125 250 500 1000 2000 4000
007 2,400 86.3 93.2 89.2 85.2 84.2 80.2 78.2 74.2
008 3,000 88.3 95.3 91.3 87.3 86.3 82.3 80.3 76.3
012 4,000 91.6 98.6 94.6 90.6 89.6 85.6 83.6 79.6
014 5,000 91.1 97.3 93.3 89.3 90.3 84.3 82.3 78.3
40RM
016 6,000 92.7 98.9 94.9 90.9 91.9 85.9 83.9 79.9
024 8,000 96.4 102.6 98.6 94.6 95.6 89.6 87.6 83.6
028 10,000 96.2 102.5 98.5 94.5 95.5 89.5 87.5 83.5
034 12,000 98.5 104.7 100.7 96.7 97.7 91.7 89.7 85.7
008 3,000 88.3 95.3 91.3 87.3 86.3 82.3 80.3 76.3
010 3,400 89.8 96.7 92.7 88.7 87.7 83.7 81.7 77.7
012 4,000 91.6 98.6 94.6 90.6 89.6 85.6 83.6 79.6
014 5,000 91.1 97.3 93.3 89.3 90.3 84.3 82.3 78.3
40RMS
016 6,000 92.7 98.9 94.9 90.9 91.9 85.9 83.9 79.9
024 8,000 96.4 102.6 98.6 94.6 95.6 89.6 87.6 83.6
028 10,000 96.2 102.5 98.5 94.5 95.5 89.5 87.5 83.5
034 12,000 98.5 104.7 100.7 96.7 97.7 91.7 89.7 85.7
008 3,000 88.3 95.3 91.3 87.3 86.3 82.3 80.3 76.3
012 4,000 92.0 99.0 95.0 91.0 90.0 86.0 84.0 80.0
40RMQ 016 6,000 92.9 99.2 95.2 91.2 92.2 86.2 84.2 80.2
024 8,000 96.4 102.6 98.6 94.6 95.6 89.6 87.6 83.6
028 10,000 96.2 102.5 98.5 94.5 95.5 89.5 87.5 83.5
LEGEND NOTES:
ASHRAE — American Society of Heating, Refrigeration and 1. The above estimated sound power levels are based upon the ASHRAE
Air Conditioning Engineers calculation approach from the ASHRAE 1987 HVAC Systems and Applica-
HVAC — Heating, Ventilation and Air Conditioning tions handbook, Chapter 52.
2. Since this data is calculated, these sound power levels may be different than
the actual sound power levels.
3. The acoustic center of the unit is located at the geometric center of the unit.
FACTORY-SUPPLIED FILTER PRESSURE DROP FACTORY-SUPPLIED FILTER PRESSURE DROP

— ENGLISH — SI
AIRFLOW PRESSURE DROP AIRFLOW PRESSURE DROP
SIZE UNIT SIZE UNIT
(Cfm) (in. wg) (L/s) (Pa)
1,800 0.05 850 13
007 40RM 2,400 0.08 007 40RM 1150 20
3,000 0.11 1450 28
40RM 2,250 0.07 40RM 1000 17
008 40RMQ 3,000 0.11 008 40RMQ 1400 27
40RMS 3,750 0.15 40RMS 1800 38
010* 40RMS — — 010* 40RMS — —
40RM 3,000 0.11 40RM 1450 28
012 40RMQ 4,000 0.17 012 40RMQ 1900 42
40RMS 5,000 0.23 40RMS 2350 56
40RM 3,750 0.06 40RM
1750 15
014 5,000 0.10 014 2350 24
40RMS 6,250 0.13
40RMS
2950 33
40RM 4,500 0.08 40RM 2100 20
016 40RMQ 6,000 0.12 016 40RMQ 2800 30
40RMS 7,500 0.17 40RMS 3500 42
40RM 6,000 0.12 40RM 2900 32
024 40RMQ 8,000 0.19 024 40RMQ 3800 47
40RMS 10,000 0.26 40RMS 4700 64
40RM 7,500 0.15 40RM 3500 36
028 40RMQ 10,000 0.22 028 40RMQ 4700 55
40RMS 12,500 0.30 40RMS 5900 76
9,000 0.19 4250 47
40RM 40RM
034 12,000 0.29 034 5650 71
40RMS 40RMS
15,000 0.40 7050 98
*Data not available. *Data not available.
54
ACCESSORY PLENUM AIR THROW DATA — ENGLISH ACCESSORY PLENUM AIR THROW DATA — SI
(Ft) (m)
AIRFLOW VANE DEFLECTION AIRFLOW VANE DEFLECTION

UNIT UNIT
(Cfm) Straight 21½° 45° (L/s) Straight 21½° 45°
40RM 2,400 39 33 24
40RM
1150 11.71 9.91 7.20
007 007
40RM 40RM
40RMQ 40RMQ
3,000 45 38 28 1400 13.87 11.71 8.63
40RMS 40RMS
008 008
40RMS 40RMS
3,400 49 41 30 1600 14.98 12.53 9.17
010 010
40RM 40RM
40RMQ 40RMQ
4,000 55 46 33 1900 16.65 13.93 9.99
40RMS 40RMS
012 012
40RM 40RM
40RMS 5,000 45 38 28 40RMS 2350 13.77 11.63 8.57
014 014
40RM 40RM
40RMQ 40RMQ
40RMS 6,000 50 43 31 40RMS 2800 15.41 13.25 9.55
016 016
40RM 40RM
40RMQ 40RMQ
8,000 60 51 37 3800 18.17 15.44 11.20
40RMS 40RMS
024 024
40RM 40RM
40RMQ 10,000 76 65 47
40RMQ
4700 23.26 19.89 14.38
40RMS 40RMS
028 028
40RM 40RM
40RMS 12,000 85 72 52 40RMS 5650 25.97 22.00 15.89
034 034
NOTE: Throw distances shown are for 75 fpm terminal velocity. Use NOTE: Throw distances shown are for 0.381 m/sec terminal velocity.
the following multipliers to determine throw values for other terminal Use the following multipliers to determine throw values for other termi-
velocities. nal velocities.
TERMINAL VELOCITY THROW FACTOR

TERMINAL VELOCITY THROW FACTOR
(Fpm) (m/sec)
50 X 1.50 0.254 X 1.50
100 X 0.75 0.508 X 0.75
150 X 0.50 0.762 X 0.50
55
ACCESSORY PRESSURE DROP — ENGLISH (in. wg)
AIRFLOW DISCHARGE RETURN AIR HEATING COILS
UNIT ECONOMIZER
(Cfm) PLENUM GRILLE Hot Water Steam Electric
1,800 0.06 0.01 0.10 0.10 0.04 0.05
40RM
2,400 0.10 0.01 0.16 0.16 0.06 0.07
007
3,000 0.14 0.02 0.23 0.23 0.10 0.09
40RM
2,250 0.09 0.01 0.15 0.15 0.06 0.06
40RMQ
3,000 0.14 0.02 0.23 0.23 0.10 0.09
40RMS
3,750 0.21 0.03 0.35 0.35 0.15 0.15
008
2,550 0.11 0.02 0.18 0.18 0.07 0.07
40RMS
3,400 0.17 0.03 0.28 0.28 0.12 0.13
010
4,250 0.24 0.04 0.41 0.41 0.19 0.19
40RM
3,000 0.14 0.02 0.23 0.23 0.10 0.09
40RMQ
4,000 0.22 0.04 0.37 0.37 0.17 0.17
40RMS
5,000 0.32 0.06 0.53 0.53 0.26 0.28
012
40RM 3,750 0.07 0.01 0.11 0.11 0.04 0.05
40RMS 5,000 0.12 0.02 0.17 0.17 0.07 0.07
014 6,250 0.17 0.02 0.25 0.25 0.11 0.11
40RM
4,500 0.10 0.01 0.15 0.15 0.06 0.06
40RMQ
6,000 0.16 0.02 0.23 0.23 0.10 0.09
40RMS
7,500 0.23 0.03 0.33 0.33 0.15 0.15
016
40RM
6,000 0.16 0.02 0.23 0.23 0.10 0.09
40RMQ
8,000 0.26 0.04 0.37 0.37 0.17 0.17
40RMS
10,000 0.37 0.06 0.53 0.53 0.26 0.28
024
40RM
7,500 0.15 0.02 0.28 0.28 0.09 0.06
40RMQ
10,000 0.24 0.03 0.44 0.44 0.16 0.09
40RMS
12,500 0.34 0.05 0.63 0.63 0.24 0.14
028
40RM 9,000 0.20 0.03 0.37 0.37 0.13 0.08
40RMS 12,000 0.32 0.05 0.59 0.59 0.22 0.14
034 15,000 0.46 0.07 0.85 0.85 0.34 0.21
ACCESSORY PRESSURE DROP — SI (Pa)

AIRFLOW DISCHARGE RETURN AIR HEATING COILS
UNIT ECONOMIZER
(L/s) PLENUM GRILLE Hot Water Steam Electric
850 15 2 25 25 9 12
40RM
1150 25 3 41 41 16 18
007
1450 36 5 60 60 26 23
40RM
1000 20 2 33 33 12 13
40RMQ
1400 34 5 57 57 24 22
40RMS
1800 51 8 85 85 39 39
008
1200 26 5 44 44 18 17
40RMS
1600 42 7 70 70 31 32
010
2000 61 10 101 101 48 47
40RM
1450 36 5 60 60 26 23
40RMQ
1900 56 10 93 93 43 43
40RMS
2350 79 15 132 132 65 69
012
40RM 1750 18 2 26 26 10 12
40RMS 2350 29 5 43 43 17 17
014 2950 43 5 62 62 26 27
40RM
2100 24 2 36 36 14 15
40RMQ
2800 39 5 57 57 24 22
40RMS
3500 56 7 82 82 37 37
016
40RM
2900 41 5 60 60 26 23
40RMQ
3800 64 10 93 93 43 43
40RMS
4700 91 15 132 132 65 69
024
40RM
3500 37 5 67 67 22 15
40RMQ
4700 59 7 109 109 39 22
40RMS
5900 86 12 157 157 60 35
028
40RM 4250 50 7 92 92 32 20
40RMS 5650 80 12 147 147 56 35
034 7050 114 17 210 210 85 52
56
Electrical data
STANDARD MOTORS
FAN MOTOR POWER SUPPLY
VOLTAGE
UNIT V*-PH-Hz Minimum Circuit
LIMITS Hp (kW) FLA MOCP
Amps
208/230-1-60 187-253 1.3 (0.97) 7.6 9.5 15
208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 15
40RM 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
007 575-3-60 518-632 1.0 (0.75) 1.4 1.8 15
230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
40RM 208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 15
40RMQ 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
40RMS 575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
008 230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 15
40RMS 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
010 575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15
208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 15
40RM 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
40RMQ
575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
40RMS
012 230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RM 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
40RMS 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
014 230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 3.7 (2.76) 10.2 12.8 20
40RM 460-3-60 414-506 3.7 (2.76) 4.8 6.0 15
40RMQ
575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
40RMS
016 230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 5.0 (3.73) 14.6/12.8 18.3/16.0 30/25
40RM 460-3-60 414-506 5.0 (3.73) 6.4 8.0 15
40RMQ
575-3-60 518-632 5.0 (3.73) 5.1 6.4 15
40RMS
024 230-3-50 207-253 5.0 (3.73) 13.2 16.5 25
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 7.5 (5.59) 21.5/19.4 26.9/24.3 45/40
40RM 460-3-60 414-506 7.5 (5.59) 9.7 12.1 20
40RMQ
575-3-60 518-632 7.5 (5.59) 7.8 9.8 15
40RMS
028 230-3-50 207-253 7.5 (5.59) 19.8 24.8 40
400-3-50 360-440 7.5 (5.59) 11.4 14.3 25
208/230-3-60 187-253 10.0 (7.46) 28.2/26.8 35.3/33.5 60/60
40RM 460-3-60 414-506 10.0 (7.46) 13.4 16.8 30
40RMS 575-3-60 518-632 10.0 (7.46) 10.3 12.9 20
034 230-3-50 207-253 10.0 (7.46) 28.0 35.0 60
400-3-50 360-440 10.0 (7.46) 16.1 20.1 30
57
Electrical data (cont)
ALTERNATE MOTORS
FAN MOTOR POWER SUPPLY
VOLTAGE
UNIT V*-PH-Hz Minimum Circuit
LIMITS Hp (kW) FLA MOCP
Amps
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RM 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
007 575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 15
40RM 208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RMQ 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
40RMS 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
008 230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RMS 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
010 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 3.7 (2.76) 10.2 12.8 20
40RM 460-3-60 414-506 3.7 (2.76) 4.8 6.0 15
40RMQ
40RMS 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
012 230-3-50 207-253 5.0 (3.73) 13.2 16.5 25
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 3.7 (2.76) 10.2 12.7 20
40RM 460-3-60 414-506 3.7 (2.76) 4.8 6.0 15
40RMS 575-3-60 518-632 5.0 (3.73) 5.1 6.4 15
014 230-3-50 207-253 5.0 (3.73) 15.2 19.0 30
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 5.0 (3.73) 14.6/12.8 18.3/16.0 30/25
40RM 460-3-60 414-506 5.0 (3.73) 6.4 8.0 15
40RMQ
40RMS 575-3-60 518-632 5.0 (3.73) 5.1 6.4 15
016 230-3-50 207-253 5.0 (3.73) 13.2 16.5 25
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 7.5 (5.59) 21.5/19.4 26.9/24.3 45/40
40RM 460-3-60 414-506 7.5 (5.59) 9.7 12.1 20
40RMQ
575-3-60 518-632 7.5 (5.59) 7.8 9.8 15
40RMS
024 230-3-50 207-253 7.5 (5.59) 19.8 24.8 40
400-3-50 360-440 7.5 (5.59) 11.4 14.3 25
208/230-3-60 187-253 10.0 (7.46) 28.2/26.8 35.3/33.5 60/60
40RM 460-3-60 414-506 10.0 (7.46) 13.4 16.8 30
40RMQ
575-3-60 518-632 10.0 (7.46) 10.3 12.9 20
40RMS
028 230-3-50 207-253 10.0 (7.46) 28.0 35.0 60
400-3-50 360-440 10.0 (7.46) 16.1 20.1 30
LEGEND Example: Supply voltage is 400-3-50.
FLA — Full Load Amps AB = 393 v
MOCP — Maximum Overcurrent Protection BC = 403 v
AC = 396 v
*Motors are designed for satisfactory operation within 10% of nominal voltages 393 + 403 + 396
shown. Voltages should not exceed the limits shown in the Voltage Limits Average Voltage =
column. 3
1192
NOTES: =
3
1. Minimum circuit amps (MCA) and MOCP values are calculated in accor-
dance with NEC (National Electrical Code) (U.S.A. standard), Article 440. = 397
2. Motor FLA values are established in accordance with UL (Underwriters’ Lab- Determine maximum deviation from average voltage.
oratories) Standard 1995 (U.S.A. standard). (AB) 397 – 393 = 4 v
3. Indoor fan motors 5 hp and larger meet the minimum efficiency require- (BC) 403 – 397 = 6 v
ments as established by the Energy Policy Act of 1992 (EPACT) effective (AC) 397 – 396 = 1 v
October 24, 1997. Maximum deviation is 6 v.
4. Unbalanced 3-Phase Supply Voltage
Never operate a motor where a phase imbalance in supply voltage is greater Determine percent of voltage imbalance.
than 2%. Use the following formula to determine the percentage of voltage 6
imbalance. % Voltage Imbalance = 100 x 397
% Voltage Imbalance = 1.5%
max voltage deviation from average voltage This amount of phase imbalance is satisfactory as it is below the maximum
= 100 x --------------------------------------------------------------------------------------------------------------------
average voltage allowable 2%.
IMPORTANT: If the supply voltage phase imbalance is more than 2%, contact
the local electric utility company immediately.
58
ELECTRIC HEATER DATA
ELECTRIC HEATER(S)
FAN MOTOR
HEATER PART NO. UNIT V-PH-Hz Nominal Actual Capacity (kW) MCA* MOCP*
Capacity (kW) Stage 1 Stage 2 Total FLA
Hp kW FLA
1.3† 0.97 7.6 5 3.8 — 3.8 10.4 22.5 25
2.4† 1.79 11.0 5 3.8 — 3.8 10.4 26.8 35
208-3-60 2.4 1.79 5.2 5 3.8 — 3.8 10.4 19.5 20
2.9 2.16 7.5 5 3.8 — 3.8 10.4 22.4 25
3.7 2.76 10.2 5 3.8 — 3.8 10.4 25.8 30
1.3† 0.97 7.6 5 5.0 — 5.0 12.0 24.5 25
CAELHEAT001A00 2.4† 1.79 11.0 5 5.0 — 5.0 12.0 28.8 35
240-3-60 2.4 1.79 5.2 5 5.0 — 5.0 12.0 21.5 25
2.9 2.16 7.5 5 5.0 — 5.0 12.0 24.4 25
3.7 2.76 10.2 5 5.0 — 5.0 12.0 27.8 30
2.4 1.79 5.2 5 5.0 — 5.0 12.0 21.5 25
240-3-50 2.9 2.16 7.5 5 5.0 — 5.0 12.0 24.4 25
5.0 3.73 15.2 5 5.0 — 5.0 12.0 34.0 40
2.4 1.79 2.6 5 5.0 — 5.0 6.00 10.8 15
480-3-60 2.9 2.16 3.4 5 5.0 — 5.0 6.00 11.8 15
3.7 2.76 4.8 5 5.0 — 5.0 6.00 13.5 15
CAELHEAT002A00
2.4 1.79 2.6 5 3.5 — 3.5 5.00 9.5 15
400-3-50 2.9 2.16 3.4 5 3.5 — 3.5 5.00 10.5 15
5.0 3.73 7.6 5 3.5 — 3.5 5.00 15.8 20
1.0 0.75 1.4 5 5.0 — 5.0 5.00 8.0 15
CAELHEAT003A00 575-3-60 2.0 1.49 2.3 5 5.0 — 5.0 5.00 9.2 15
3.0 2.24 3.8 5 5.0 — 5.0 5.00 11.0 15
1.3† 0.97 7.6 10 7.5 — 7.5 20.8 35.6 40
2.4† 1.79 11.0 10 7.5 — 7.5 20.8 39.8 40
208-3-60 2.4 1.79 5.2 10 7.5 — 7.5 20.8 32.6 35
2.9 2.16 7.5 10 7.5 — 7.5 20.8 35.4 40
3.7 2.76 10.2 10 7.5 — 7.5 20.8 38.8 40
1.3† 0.97 7.6 10 10.0 — 10.0 24.1 39.6 40
CAELHEAT004A00 2.4† 1.79 11.0 10 10.0 — 10.0 24.1 43.8 50
240-3-60 2.4 1.79 5.2 10 10.0 — 10.0 24.1 36.6 40
2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
3.7 2.76 10.2 10 10.0 — 10.0 24.1 42.8 50
40RM007-012
40RMQ008,012 2.4 1.79 5.2 10 10.0 — 10.0 24.1 36.6 40
240-3-50 2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
40RMS008-012
5.0 3.73 15.2 10 10.0 — 10.0 24.1 49.1 50
2.4 1.79 2.6 10 10.0 — 10.0 12.0 18.3 20
480-3-60 2.9 2.16 3.4 10 10.0 — 10.0 12.0 19.3 20
3.7 2.76 4.8 10 10.0 — 10.0 12.0 21.0 25
CAELHEAT005A00
2.4 1.79 2.6 10 6.9 — 6.9 10.0 15.8 20
400-3-50 2.9 2.16 3.4 10 6.9 — 6.9 10.0 16.8 20
5.0 3.73 7.6 10 6.9 — 6.9 10.0 22.0 25
1.0 0.75 1.4 10 10.0 — 10.0 10.0 14.3 15
CAELHEAT006A00 575-3-60 2.0 1.49 2.3 10 10.0 — 10.0 10.0 15.4 20
3.0 2.24 3.8 10 10.0 — 10.0 10.0 17.3 20
1.3† 0.97 7.6 15 11.3 — 11.3 31.3 48.6 50
2.4† 1.79 11.0 15 11.3 — 11.3 31.3 52.9 60
208-3-60 2.4 1.79 5.2 15 11.3 — 11.3 31.3 45.6 50
2.9 2.16 7.5 15 11.3 — 11.3 31.3 48.5 50
3.7 2.76 10.2 15 11.3 — 11.3 31.3 51.9 60
1.3† 0.97 7.6 15 15.0 — 15.0 36.1 54.6 60
CAELHEAT007A00 2.4† 1.79 11.0 15 15.0 — 15.0 36.1 58.9 60
240-3-60 2.4 1.79 5.2 15 15.0 — 15.0 36.1 51.6 60
2.9 2.16 7.5 15 15.0 — 15.0 36.1 54.5 60
3.7 2.76 10.2 15 15.0 — 15.0 36.1 57.9 60
2.4 1.79 5.2 15 15.0 — 15.0 36.1 51.6 60
240-3-50 2.9 2.16 7.5 15 15.0 — 15.0 36.1 54.5 60
5.0 3.73 15.2 15 15.0 — 15.0 36.1 64.1 70
2.4 1.79 2.6 15 15.0 — 15.0 18.0 25.8 30
480-3-60 2.9 2.16 3.4 15 15.0 — 15.0 18.0 26.8 30
3.7 2.76 4.8 15 15.0 — 15.0 18.0 28.6 30
CAELHEAT008A00
2.4 1.79 2.6 15 10.4 — 10.4 15.0 22.0 25
400-3-50 2.9 2.16 3.4 15 10.4 — 10.4 15.0 23.0 25
5.0 3.73 7.6 15 10.4 — 10.4 15.0 28.3 30
1.0 0.75 1.4 15 15.0 — 15.0 15.1 20.6 25
CAELHEAT009A00 575-3-60 2.0 1.49 2.3 15 15.0 — 15.0 15.1 21.7 25
3.0 2.24 3.8 15 15.0 — 15.0 15.1 23.6 25
59
ELECTRIC HEATER DATA (cont)
ELECTRIC HEATER(S)
FAN MOTOR
FLA
Hp kW FLA Capacity (kW) Stage 1 Stage 2 Total
1.3† 0.97 7.6 25 11.3 7.5 18.8 52.1 74.7 80
2.4† 1.79 11.0 25 11.3 7.5 18.8 52.1 78.9 80
208-3-60 2.4 1.79 5.2 25 11.3 7.5 18.8 52.1 71.7 80
2.9 2.16 7.5 25 11.3 7.5 18.8 52.1 74.5 80
3.7 2.76 10.2 25 11.3 7.5 18.8 52.1 77.9 80
1.3† 0.97 7.6 25 15.0 10.0 25.0 60.1 84.7 90
CAELHEAT010A00 2.4† 1.79 11.0 25 15.0 10.0 25.0 60.1 88.9 90
240-3-60 2.4 1.79 5.2 25 15.0 10.0 25.0 60.1 81.7 90
2.9 2.16 7.5 25 15.0 10.0 25.0 60.1 84.6 90
3.7 2.76 10.2 25 15.0 10.0 25.0 60.1 87.9 90
40RM007-012 2.4 1.79 5.2 25 15.0 10.0 25.0 60.1 81.7 90
40RMQ008,012 240-3-50
40RMS008-012 2.9 2.16 7.5 25 15.0 10.0 25.0 60.1 84.6 90
5.0 3.73 15.2 25 15.0 10.0 25.0 60.1 94.2 100
2.4 1.79 2.6 25 15.0 10.0 25.0 30.1 40.8 50
480-3-60 2.9 2.16 3.4 25 15.0 10.0 25.0 30.1 41.8 50
3.7 2.76 4.8 25 15.0 10.0 25.0 30.1 43.6 50
CAELHEAT011A00
2.4 1.79 2.6 25 10.4 6.9 17.4 25.1 34.6 35
400-3-50 2.9 2.16 3.4 25 10.4 6.9 17.4 25.1 35.6 40
5.0 3.73 7.6 25 10.4 6.9 17.4 25.1 40.8 50
1.0 0.75 1.4 25 15.0 10.0 25.0 25.1 33.1 35
CAELHEAT012A00 575-3-60 2.0 1.49 2.3 25 15.0 10.0 25.0 25.1 34.3 35
3.0 2.24 3.8 25 15.0 10.0 25.0 25.1 36.1 40
2.4† 1.79 11.0 35 15.0 11.3 26.3 73.0 105.0 110
208-3-60 2.4 1.79 5.2 35 15.0 11.3 26.3 73.0 97.7 100
2.9 2.16 7.5 35 15.0 11.3 26.3 73.0 100.6 110
3.7 2.76 10.2 35 15.0 11.3 26.3 73.0 104.0 110
2.4† 1.79 11.0 35 20.0 15.0 35.0 84.2 119.0 125
CAELHEAT013A00 2.4 1.79 5.2 35 20.0 15.0 35.0 84.2 111.7 125
240-3-60
2.9 2.16 7.5 35 20.0 15.0 35.0 84.2 114.6 125
3.7 2.76 10.2 35 20.0 15.0 35.0 84.2 118.0 125
40RM008,012 2.4 1.79 5.2 35 20.0 15.0 35.0 84.2 111.7 125
40RMQ008,012 240-3-50 2.9 2.16 7.5 35 20.0 15.0 35.0 84.2 114.6 125
40RMS008-012 5.0 3.73 15.2 35 20.0 15.0 35.0 84.2 124.2 125
2.4 1.79 2.6 35 20.0 15.0 35.0 42.1 55.9 60
480-3-60 2.9 2.16 3.4 35 20.0 15.0 35.0 42.1 56.9 60
CAELHEAT014A00 3.7 2.76 4.8 35 20.0 15.0 35.0 42.1 58.6 60
2.4 1.79 2.6 35 13.9 10.4 24.3 35.1 47.1 50
400-3-50 2.9 2.16 3.4 35 13.9 10.4 24.3 35.1 48.1 50
5.0 3.73 7.6 35 13.9 10.4 24.3 35.1 53.4 60
CAELHEAT015A00 575-3-60 2.0 1.49 2.3 35 20.0 15.0 35.0 35.1 46.8 50
3.0 2.24 3.8 35 20.0 15.0 35.0 35.1 48.7 50
LEGEND 2. The following equation converts kW of heat energy to Btuh:
FLA — Full Load Amps kW x 3,412 = Btuh.
Hp — Horsepower 3. Heater contactor coils are 24 v and require 8 va holding current.
MCA — Minimum Circuit Amps 4. Electric heaters are tested and ETL approved at maximum total
MOCP — Maximum Overcurrent Protection (Amps) external static pressure of 1.9 in. wg.
5. MCA and MOCP values apply to both standard and alternate
*Values shown are for single-point connection of electric heat acces- factory-supplied motors.
sory and air handler. 6. Approximate shipping weight for CAELHEAT001A00-015A00 is
†Single-phase motors. All other motors are 3-phase. 55 lb each, CAELHEAT016A00-027A00 is 60 lb each, and
CAELHEAT028A00-039A00 is 75 lb each.
NOTES:
1. Electrical resistance heaters are rated at 240 v, 480 v, or 575 v. To
determine heater capacity (kW) at unit nameplate, multiply the
240-v, 480-v, or 575-v capacity (kW) by the factor shown in the
table below for the unit voltage.
HEATER ACTUAL HEATER VOLTAGE

RATING
VOLTAGE 200 208 230 240 400 440 460 480 550 575 600
240 0.694 0.751 0.918 1 — — — — — — —
480 — — — — 0.694 0.84 0.918 1 — — —
575 — — — — — — — — 0.915 1 1.089
60
ELECTRIC HEATER(S)
FAN MOTOR
FLA
2.9 2.16 7.5 10 7.5 — 7.5 20.8 35.4 40
208-3-60 3.7 2.76 10.2 10 7.5 — 7.5 20.8 38.8 40
5.0 3.73 14.6 10 7.5 — 7.5 20.8 41.3 50
7.5 5.59 21.5 10 7.5 — 7.5 20.8 52.9 60
2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
CAELHEAT016A00 3.7 2.76 10.2 10 10.0 — 10.0 24.1 42.8 50
240-3-60
5.0 3.73 12.8 10 10.0 — 10.0 24.1 46.1 50
7.5 5.59 19.4 10 10.0 — 10.0 24.1 54.4 60
2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
240-3-50 5.0 3.73 13.2 10 10.0 — 10.0 24.1 46.6 50
7.5 5.59 19.8 10 10.0 — 10.0 24.1 54.8 60
2.9 2.16 3.4 10 10.0 — 10.0 12.0 19.3 20
480-3-60 3.7 2.76 4.8 10 10.0 — 10.0 12.0 21.0 25
5.0 3.73 6.4 10 10.0 — 10.0 12.0 23.0 25
CAELHEAT017A00 7.5 5.59 9.7 10 10.0 — 10.0 12.0 27.2 30
2.9 2.16 3.4 10 6.9 — 6.9 10.0 16.8 20
400-3-50 5.0 3.73 7.6 10 6.9 — 6.9 10.0 22.0 25
7.5 5.59 11.4 10 6.9 — 6.9 10.0 26.8 35
3.0 2.24 3.8 10 10.0 — 10.0 10.0 17.3 20
CAELHEAT018A00 575-3-60 5.0 3.73 5.1 10 10.0 — 10.0 10.0 19.6 20
7.5 5.59 7.8 10 10.0 — 10.0 10.0 22.1 25
2.9 2.16 7.5 20 14.9 — 14.9 41.5 51.2 70
208-3-60 3.7 2.76 10.2 20 14.9 — 14.9 41.5 64.6 70
5.0 3.73 14.6 20 14.9 — 14.9 41.5 70.1 80
7.5 5.59 21.5 20 14.9 — 14.9 41.5 78.7 80
2.9 2.16 7.5 20 19.9 — 19.9 47.9 69.2 70
CAELHEAT019A00 3.7 2.76 10.2 20 19.9 — 19.9 47.9 72.6 80
240-3-60
5.0 3.73 12.8 20 19.9 — 19.9 47.9 75.8 80
7.5 5.59 19.4 20 19.9 — 19.9 47.9 84.1 80
2.9 2.16 7.5 20 19.9 — 19.9 47.9 69.2 70
40RM014-024 240-3-50 5.0 3.73 13.2 20 19.9 — 19.9 47.9 76.3 80
40RMQ016,024 7.5 5.59 19.8 20 19.9 — 19.9 47.9 84.6 90
40RMS014-024 2.9 2.16 3.4 20 20.0 — 20.0 24.1 34.3 35
480-3-60 3.7 2.76 4.8 20 20.0 — 20.0 24.1 36.1 40
5.0 3.73 6.4 20 20.0 — 20.0 24.1 39.1 40
CAELHEAT020A00 7.5 5.59 9.7 20 20.0 — 20.0 24.1 43.2 50
2.9 2.16 3.4 20 13.9 — 13.9 20.0 29.3 30
400-3-50 5.0 3.73 7.6 20 13.9 — 13.9 20.0 45.1 50
7.5 5.59 11.4 20 13.9 — 13.9 20.0 49.2 50
3.0 2.24 3.8 20 20.0 — 20.0 20.1 29.9 30
CAELHEAT021A00 575-3-60 5.0 3.73 5.1 20 20.0 — 20.0 20.1 31.5 35
7.5 5.59 7.8 20 20.0 — 20.0 20.1 34.9 35
2.9 2.16 7.5 30 15.0 7.5 22.5 62.5 87.5 90
208-3-60 3.7 2.76 10.2 30 15.0 7.5 22.5 62.5 90.9 100
5.0 3.73 14.6 30 15.0 7.5 22.5 62.5 96.4 100
7.5 5.59 21.5 30 15.0 7.5 22.5 62.5 105.0 110
2.9 2.16 7.5 30 20.0 10.0 30.0 72.2 99.6 100
CAELHEAT022A00 3.7 2.76 10.2 30 20.0 10.0 30.0 72.2 103.0 110
240-3-60
5.0 3.73 12.8 30 20.0 10.0 30.0 72.2 106.2 110
7.5 5.59 19.4 30 20.0 10.0 30.0 72.2 114.5 125
2.9 2.16 7.5 30 20.0 10.0 30.0 72.2 99.6 100
240-3-50 5.0 3.73 13.2 30 20.0 10.0 30.0 72.2 106.7 110
7.5 5.59 19.8 30 20.0 10.0 30.0 72.2 115.0 125
2.9 2.16 3.4 30 20.0 10.0 30.0 36.1 49.4 50
480-3-60 3.7 2.76 4.8 30 20.0 10.0 30.0 36.1 51.1 60
5.0 3.73 6.4 30 20.0 10.0 30.0 36.1 53.1 60
CAELHEAT023A00 7.5 5.59 9.7 30 20.0 10.0 30.0 36.1 57.2 60
2.9 2.16 3.4 30 13.9 6.9 20.8 30.1 41.8 50
400-3-50 5.0 3.73 7.6 30 13.9 6.9 20.8 30.1 47.1 50
7.5 5.59 11.4 30 13.9 6.9 20.8 30.1 51.8 60
3.0 2.24 3.8 30 20.0 10.0 30.0 30.1 42.4 50
CAELHEAT024A00 575-3-60 5.0 3.73 5.1 30 20.0 10.0 30.0 30.1 44.0 50
7.5 5.59 7.8 30 20.0 10.0 30.0 30.1 47.4 50
61
ELECTRIC HEATER(S)
FAN MOTOR
HEATER PART NO. UNIT V-PH-Hz Nominal Actual Capacity (kW) FLA MCA* MOCP*
3.7 2.76 10.2 50 22.6 15.0 37.6 104.3 143.1 150
208-3-60 5.0 3.73 14.6 50 22.6 15.0 37.6 104.3 148.6 150
7.5 5.59 21.5 50 22.6 15.0 37.6 104.3 157.2 175
3.7 2.76 10.2 50 30.0 20.0 50.0 120.3 163.1 175
CAELHEAT025A00 240-3-60 5.0 3.73 12.8 50 30.0 20.0 50.0 120.3 166.4 175
7.5 5.59 19.4 50 30.0 20.0 50.0 120.3 174.6 200
2.9 2.16 7.5 50 30.0 20.0 50.0 120.3 159.7 175
240-3-50 5.0 3.73 13.2 50 30.0 20.0 50.0 120.3 166.9 175
40RM016,024
40RMQ016,024 7.5 5.59 19.8 50 30.0 20.0 50.0 120.3 175.1 200
40RMS016,024 3.7 2.76 4.8 50 30.0 20.0 50.0 60.1 81.2 90
480-3-60 5.0 3.73 6.4 50 30.0 20.0 50.0 60.1 83.2 90
CAELHEAT026A00 7.5 5.59 9.7 50 30.0 20.0 50.0 60.1 87.3 90
2.9 2.16 3.4 50 20.8 13.9 34.7 50.1 66.9 70
400-3-50 5.0 3.73 7.6 50 20.8 13.9 34.7 50.1 72.1 80
7.5 5.59 11.4 50 20.8 13.9 34.7 50.1 76.9 80
3.0 2.24 3.8 50 30.0 20.0 50.0 50.2 67.5 70
CAELHEAT027A00 575-3-60 5.0 3.73 5.1 50 30.0 20.0 50.0 50.2 69.1 70
7.5 5.59 7.8 50 30.0 20.0 50.0 50.2 72.5 80
208-3-60 7.5 5.59 19.8 20 14.9 — 14.9 41.5 78.7 80
10.0 7.46 28.2 20 14.9 — 14.9 41.5 87.1 100
CAELHEAT028A00 240-3-60 7.5 5.59 19.4 20 19.9 — 19.9 47.9 81.4 90
10.0 7.46 26.8 20 19.9 — 19.9 47.9 93.3 110
240-3-50 7.5 5.59 19.8 20 19.9 — 19.9 47.9 84.6 90
10.0 7.46 28.0 20 19.9 — 19.9 47.9 94.8 110
480-3-60 7.5 5.59 9.7 20 20.0 — 20.0 24.1 42.2 50
CAELHEAT029A00 10.0 7.46 13.4 20 20.0 — 20.0 24.1 46.8 50
400-3-50 7.5 5.59 11.4 20 13.9 — 13.9 20.0 39.3 40
10.0 7.46 16.1 20 13.9 — 13.9 20.0 45.2 50
CAELHEAT030A00 575-3-60 7.5 5.59 7.8 20 20.0 — 20.0 20.1 34.9 35
40RM028,034
10.0 7.46 10.3 20 20.0 — 20.0 20.1 38.0 40
40RMQ028
40RMS028,034 208-3-60 7.5 5.59 19.8 40 15.0 15.0 30.0 83.4 131.1 150
10.0 7.46 28.0 40 15.0 15.0 30.0 83.4 139.5 150
CAELHEAT031A00 240-3-60 7.5 5.59 19.4 40 20.0 20.0 40.0 96.2 144.5 150
10.0 7.46 26.8 40 20.0 20.0 40.0 96.2 153.8 175
240-3-50 7.5 5.59 19.8 40 20.0 20.0 40.0 96.2 145.0 150
10.0 7.46 28.0 40 20.0 20.0 40.0 96.2 155.3 175
480-3-60 7.5 5.59 9.7 40 20.0 20.0 40.0 47.9 71.9 80
CAELHEAT032A00 10.0 7.46 13.4 40 20.0 20.0 40.0 47.9 76.6 80
400-3-50 7.5 5.59 11.4 40 13.9 13.9 27.8 39.9 64.1 70
10.0 7.46 16.1 40 13.9 13.9 27.8 39.9 70.0 80
CAELHEAT033A00 575-3-60 7.5 5.59 7.8 40 20.0 20.0 40.0 40.2 60.0 60
10.0 7.46 10.3 40 20.0 20.0 40.0 40.2 63.1 70
55 lb each, CAELHEAT016A00-027A00 is 60 lb each, and
NOTES: CAELHEAT028A00-039A00 is 75 lb each.

RATING
VOLTAGE 200 208 230 240 400 440 460 480 550 575 600
240 0.694 0.751 0.918 1 — — — — — — —
480 — — — — 0.694 0.84 0.918 1 — — —
575 — — — — — — — — 0.915 1 1.089
62
ELECTRIC HEATER(S)
FAN MOTOR
HEATER PART NO. UNIT V-PH-Hz Actual Capacity (kW) MCA* MOCP*
Nominal Capacity (kW) FLA
Hp kW FLA Stage 1 Stage 2 Total
208-3-60 7.5 5.59 19.8 50 22.6 15.0 37.6 104.3 157.2 175
10.0 7.46 28.0 50 22.6 15.0 37.6 104.3 165.6 175
CAELHEAT034A00 240-3-60 7.5 5.59 19.4 50 30.0 20.0 50.0 120.3 174.6 200
10.0 7.46 26.8 50 30.0 20.0 50.0 120.3 183.9 200
240-3-50 7.5 5.59 19.8 50 30.0 20.0 50.0 120.3 175.1 200
10.0 7.46 28.0 50 30.0 20.0 50.0 120.3 185.4 200
480-3-60 7.5 5.59 9.7 50 30.0 20.0 50.0 60.1 87.3 90
10.0 7.46 13.4 50 30.0 20.0 50.0 60.1 91.9 100
CAELHEAT035A00
400-3-50 7.5 5.59 11.4 50 20.8 13.9 34.7 50.1 76.9 80
10.0 7.46 16.1 50 20.8 13.9 34.7 50.1 82.8 90
CAELHEAT036A00 7.5 5.59 7.8 50 30.0 20.0 50.0 50.2 72.5 80
40RM028,034 575-3-60
10.0 7.46 10.3 50 30.0 20.0 50.0 50.2 75.6 80
40RMQ028
40RMS028,034 208-3-60 7.5 5.59 19.8 70 30.0 22.6 52.6 145.9 172.8 175
10.0 7.46 28.0 70 30.0 22.6 52.6 145.9 181.2 200
CAELHEAT037A00 240-3-60 7.5 5.59 19.4 70 40.0 30.0 70.0 168.4 192.6 200
10.0 7.46 26.8 70 40.0 30.0 70.0 168.4 201.9 225
240-3-50 7.5 5.59 19.8 70 40.0 30.0 70.0 168.4 193.1 200
10.0 7.46 28.0 70 40.0 30.0 70.0 168.4 203.4 225
480-3-60 7.5 5.59 9.7 70 40.0 30.0 70.0 84.2 96.3 100
CAELHEAT038A00 10.0 7.46 13.4 70 40.0 30.0 70.0 84.2 100.9 110
400-3-50 7.5 5.59 11.4 70 27.8 20.8 48.6 70.2 84.4 90
10.0 7.46 16.1 70 27.8 20.8 48.6 70.2 90.3 100
CAELHEAT039A00 575-3-60 7.5 5.59 7.8 70 40.0 30.0 70.0 70.3 80.0 90
10.0 7.46 10.3 70 40.0 30.0 70.0 70.3 83.2 90
55 lb each, CAELHEAT016A00-027A00 is 60 lb each, and
NOTES: CAELHEAT028A00-03900 is 75 lb each.

RATING
VOLTAGE 200 208 230 240 400 440 460 480 550 575 600
240 0.694 0.751 0.918 1 — — — — — — —
480 — — — — 0.694 0.84 0.918 1 — — —
575 — — — — — — — — 0.915 1 1.089
63
Typical piping and wiring
VERTICAL INSTALLATION — 40RM (TYPICAL)
LEGEND NOTES:
NEC — National Electrical Code 1. All piping must follow standard refrigerant piping techniques. Refer to Carrier System Design
TXV — Thermostatic Expansion Valve Manual for details.
Piping 2. All wiring must comply with the applicable local and national codes.
3. Wiring and piping shown are general points-of-connection guides only and are not intended
*Field-supplied. for, or to include all details for, a specific installation.
†Double riser may be required. Consult con- 4. Liquid line solenoid valve (solenoid drop control) is recommended to prevent refrigerant
densing unit product data catalog for details. migration to the compressor.
5. Internal factory-supplied TXVs not shown.
64
HORIZONTAL INSTALLATION — 40RM (TYPICAL)
WEATHERPROOF
FUSED DISCONNECT*
PER NEC
CONDENSING
UNIT MOISTURE ELECTRIC
INDICATOR HEATER
FIELD SIGHT GLASS* ACCESSORY
SUPPLIED
POWER
POWER WIRES
LLSV*
FILTER LIQUID
INSULATED DRIER* LINE
40RM012
VAPOR UNIT
LINE
CONTROL CONDENSATE DRAIN

WIRES
POWER WIRES
INDOOR
THERMOSTAT†
FUSED DISCONNECT
PER NEC
TO OPEN SIGHT
DRAIN
LEGEND NOTES:
LLSV — Liquid Line Solenoid Valve 1. All piping must follow standard refrigerant piping techniques. Refer to Carrier System Design
NEC — National Electrical Code Manual for details.
TXV — Thermostatic Expansion Valve 2. All wiring must comply with the applicable local and national codes.
3. Wiring and piping shown are general points-of-connection guides only and are not intended
*Field-supplied. for, or to include all details for, a specific installation.
†Accessory item. 4. Liquid line solenoid valve (solenoid drop control) is recommended to prevent refrigerant
migration to the compressor.
5. Internal factory-supplied TXVs not shown.
65
Typical piping and wiring (cont)
WIRE ROUTING, BASE UNIT — 40RM, 40RMS
WIRE ROUTING, UNIT WITH ELECTRIC HEAT — 40RM, 40RMS
NEC — National Electrical Code
66
Typical control wiring schematic
HEATER CONTROL BOX
TERMINAL BLOCK
TB1
HC1
FIELD L1
DISCONNECT POWER
L2 HTR1
HC1
SUPPLY
L3
3-Ph ONLY
EQUIP GND
CIRCUIT
BREAKER
(5 HP AND
LARGER) IFC
11 21 BLK 1
12 22 BLK 2 IFM
40RM, 40RMQ, 40RMS
13 23 BLK 3
CONTROL BOX
TERMINAL BLOCK
TB1 FIELD POWER WIRING UNIT WIRING
R
HEATER CONTROL BOX
Y1 TERMINAL BLOCK
TB2
Y2 LEGEND
W1
EQUIP — Equipment
W1
GND — Ground
HC — Heater Contactor
W2 W2 HTR — Heater Element
IFC — Indoor Fan Contactor
G WHT C1 IFC C2 C IFM — Indoor Fan Motor
TB — Terminal Block
C WHT Factory Wiring
Field Wiring
X
Y1
Y2
W1 CONNECT TO
24 VAC AT
W2 CONDENSING
UNIT
G
THERMOSTAT
67
Application data
Operating limits For variable air volume (VAV) systems with supply-to-
Maximum fan speed — 40RM007-024, 40RMQ008-024, return air recycling, use the equipment room as a return air
or 40RMS008-024 . . . . . . . . . . . . . . . 1200 rpm (20 r/s) plenum.
Maximum fan speed — 40RM028,034, 40RMQ028 Hot gas bypass
and 40RMS028,034. . . . . . . . . . 1100 rpm (18.3 r/s) Hot gas bypass may be required for low load control in
General certain applications. Hot gas should only be used during
first stage cooling operation and should be applied to all
IMPORTANT: Do not bury refrigerant piping evaporator circuits that are active at that time. To apply
underground. hot gas bypass, the 40RM unit will require a field-installed
auxiliary side connector(s). See the Auxiliary Side Connec-
Select equipment to match or to be slightly less than peak tor Data table for part numbers.
load. This provides better humidity control, less unit cy- The 40RM012-034 units are equipped with a split evap-
cling, and less part-load operation. Equipment should be orator coil. If a capacity control solenoid valve is used to
selected to perform at no less than 300 cfm/ton (40 L/s turn off half of the evaporator coil (sizes 012-034) during
per kW). first stage cooling, hot gas bypass should be applied to the
The air handler fan must always be operating when the lower circuit half of the coil only. In this case, only one aux-
condensing unit is operating. iliary side connector is required. If the full coil is active at all
Ductwork should be sized according to unit size, not times, hot gas bypass should be applied to both circuits
building load. For larger units with two fans, a split duct (sizes 012-034). This situation will require two auxiliary
transition is recommended at the fan outlets, but a plenum side connectors and two one-way check valves in the hot
can be used with slight reduction in external static pressure gas piping.
capability.
AUXILIARY SIDE CONNECTOR DATA

UNIT 40RM CARRIER P/N INLET/OUTLET DIAMETER — ODF (in.) AUXILIARY (Hot Gas) DIAMETER — ODF (in.)
007 EA19BA705 11/8 5/8
008 EA19BA905 13/8 7/8
012 EA19BA705 11/8 5/

8
014 EA19BA705 11/8 5/8
016 EA19BA705 11/8 5/8
024 EA19BA705 11/8 5/

8
028 EA19BA905 13/8 7/8
034 EA19BA905 13/8 7/8
FACTORY-INSTALLED NOZZLE AND DISTRIBUTOR DATA

FEEDER TUBES
COIL TXV DISTRIBUTOR NOZZLE
UNIT TYPE Qty...Part No.* Qty...Part No.† PER DISTRIBUTOR Qty...Part No.
Qty...Size (in.)
40RM007 3, 4 Row 1...TDEBX8 1...1116 12...1/4 1...E5
40RM008 3, 4 Row 1...TDEBX8 1...1126 15...1/4 1...C6
40RMQ008 — 1...TDEBX8 1...1657 15...1/4 1...C6
40RM012 3, 4 Row 2...TDEX6 2...1115 9...1/4 2...E4
40RMQ012 — 2...TDEX4 2...1655 9...1/4 2...E4
3 Row 2...TDEBX8 2...1115 9...1/4 2...E5
40RM014 4 Row 2...TDEBX8 2...1115 12...3/16 2...E5
40RM016 3 Row 2...TDEBX8 2...1116 12...1/4 2...E6
4 Row 2...TDEBX8 2...1126 16...1/4 2...C6
40RMQ016 — 2...TDEBX8 2...1657 16...1/4 2...C6
3 Row 2...TDEBX11 2...1116 13...1/4 2...E8
40RM024 4 Row 2...TDEBX11 2...1126 18...3/16 2...C8
40RMQ024 — 2...TDEBX11 2...1655 18...3/16 2...E8
3 Row 2...TDEBX11 2...1126 15...1/4 2...C10
40RM028 4 Row 2...TDEBX11 2...1126 20...3/16 2...C15
1...TDEBX16 1...1657 24...3/16 1...C15
40RMQ028 — 1...TDEBX11 1...1657 16...3/16 1...C12
3 Row 2...TDEBX16 2...1126 18...1/4 2...C12
40RM034
4 Row 2...TDEBX16 2...1126 24...3/16 2...C17
LEGEND
*Danfoss part numbers shown.
†Sporlan Valve Co. part numbers shown.
NOTE: Hot gas bypass applications require field-supplied auxiliary side connector.
68
FAN MOTOR DATA
STANDARD MOTOR — ENGLISH
40RM 40RM 40RM 40RM 40RM 40RM 40RM
40RM 40RMQ 40RMS 40RMQ 40RMQ 40RMQ 40RMQ
UNIT 40RMS 40RMS
007 40RMS 010 40RMS
014
40RMS 40RMS 40RMS
034
008 012 016 024 028
208/230-1-60
Speed (rpm) 1725 1725 1725 — — — — — —
Hp 1.3 2.4 2.4 — — — — — —
Frame (NEMA) 56Y 56Y 56Y — — — — — —
Shaft Dia (in.) 5/8 5/8 5/8 — — — — — —
208/230-3-60 and 460-3-60
Speed (rpm) 1725 1725 1725 1725 1725 1725 1745 1745 1745
Hp 2.4 2.4 2.4 2.4 2.9 3.7 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y S184T S213T S215T
Shaft Dia (in.) 5/ 5/ 5/ 5/ 7/ 7/ 11/8 13/8 13/8
8 8 8 8 8 8
575-3-60
Speed (rpm) 1725 1725 1725 1725 1725 1725 1745 1755 1755
Hp 1.0 2.0 2.0 2.0 3.0 3.0 5.0 7.5 10.0
Frame (NEMA) 56 56HZ 56HZ 56HZ 56HZ 56HZ 184T S213T D215T
Shaft Dia (in.) 5/ 7/ 7/ 7/ 7/ 7/ 11/8 13/8 13/8
8 8 8 8 8 8
230-3-50 and 400-3-50
Speed (rpm) 1425 1425 1425 1425 1425 1425 1425 1425 1425
Hp 2.4 2.4 2.4 2.9 2.9 2.9 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y 184T S213T S215T
Shaft Dia (in.) 5/ 5/ 5/ 7/ 7/ 7/ 11/8 13/8 13/8
8 8 8 8 8 8
LEGEND
NEMA — National Electrical Manufacturers Association (U.S.A.)
ALTERNATE MOTOR — ENGLISH
40RM 40RM 40RM 40RM 40RM

40RM
UNIT 40RMS
007 40RMS 010 40RMS 014 40RMS 40RMS 40RMS
008 012 016 024 028
208/230-1-60
Speed (rpm) 1725 1725 1725 — — — — —
Hp 2.4 2.4 2.4 — — — — —
Frame (NEMA) 56Y 56Y 56Y — — — — —
Shaft Dia (in.) 5/8 5/8 5/8 — — — — —
230-3-60 and 460-3-60
Speed (rpm) 1725 1725 1725 1725 1725 1725 1745 1745
Hp 2.9 2.9 2.9 3.7 3.7 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y Y56Y Y56Y S184T S213T S215T
Shaft Dia (in.) 7/ 7/ 7/ 7/ 7/ 11/8 13/8 13/8
8 8 8 8 8
575-3-60
Speed (rpm) 1725 1725 1725 1725 1745 1745 1755 1750
Hp 2.0 3.0 3.0 3.0 5.0 5.0 7.5 10.0
Frame (NEMA) 56HZ 56HZ 56HZ 56HZ 184T 184T S213T D215T
Shaft Dia (in.) 7/ 7/ 7/ 7/ 11/8 11/8 13/8 13/8
8 8 8 8
230-3-50 and 400-3-50
Speed (rpm) 1425 1425 1425 1425 1425 1425 1425 1425
Hp 2.4 2.9 2.9 5.0 5.0 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y S184T S184T S184T S213T S215T
Shaft Dia (in.) 7/ 7/ 7/ 7/ 11/8 11/8 13/8 13/8
8 8 8 8
LEGEND
MOTOR EFFICIENCY 40RM, RMQ, RMS

MOTOR HP EPACT MINIMUM MOTOR EFFICIENCY
1.3* — 70%
2.4 — 82%
2.9 — 82%
3.7 — 84%
5.0 87.5% 87.5%
7.5 88.5% 88.5%
10.0 89.5% 89.5%
LEGEND
EPACT — Energy Policy and Conservation Act of 1992
*Single-phase only.
69
Application data (cont)
FAN MOTOR DATA (cont)
STANDARD MOTOR — SI
40RM 40RM 40RM 40RM 40RM 40RM 40RM

UNIT 007 40RMS 010 40RMS
40RMS
40RMS 40RMS 40RMS
40RMS
014 034
008 012 016 024 028
208/230-1-60
Speed (r/s) 28.75 28.75 28.75 — — — — — —
Shaft kW 0.97 1.79 1.79 — — — — — —
Frame (NEMA) 56Y 56Y 56Y — — — — — —
Shaft Dia (mm) 15.9 15.9 15.9 — — — — — —
208/230-3-60 and 460-3-60
Speed (r/s) 28.75 28.75 28.75 28.75 28.75 28.75 29.08 29.08 29.08
Shaft kW 1.79 1.79 1.79 1.79 2.16 2.76 3.73 5.60 7.46
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y S184T S213T S215T
Shaft Dia (mm) 15.9 15.9 15.9 15.9 22.2 22.2 28.6 34.9 34.9
575-3-60
Speed(r/s) 28.75 28.75 28.75 28.75 28.75 28.75 29.08 29.25 29.25
Shaft kW 0.75 1.49 1.49 1.49 2.24 2.24 3.73 5.60 7.46
Frame (NEMA) 56 56HZ 56HZ 56HZ 56HZ 56HZ 184T S213T S215T
Shaft Dia (mm) 15.9 22.2 22.2 22.2 22.2 22.2 28.6 34.9 34.9
230-3-50 and 400-3-50
Speed (r/s) 23.75 23.75 23.75 23.75 23.75 23.75 23.75 23.75 23.75
Shaft kW 1.79 1.79 1.79 2.16 2.16 2.16 3.73 5.60 7.46
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y 184T S213T S215T
Shaft Dia (mm) 15.9 15.9 15.9 22.2 22.2 22.2 28.6 34.9 34.9
LEGEND
ALTERNATE MOTOR — SI

40RM
UNIT 40RM 40RMQ 40RMS 40RMQ 40RMQ 40RMQ 40RMQ
007 40RMS 010 40RMS 40RMS
40RMS 40RMS 40RMS
008 012 014
016 024 028
208/230-1-60
Speed (r/s) 28.75 28.75 28.75 — — — — —
Shaft kW 1.79 1.79 1.79 — — — — —
Frame (NEMA) 56Y 56Y 56Y — — — — —
Shaft Dia (mm) 15.9 15.9 15.9 — — — — —
208/230-3-60 and 460-3-60
Speed(r/s) 28.75 28.75 28.75 28.75 28.75 29.08 29.08 29.17
Shaft kW 2.16 2.16 2.16 2.76 2.76 3.73 5.60 7.46
Frame (NEMA) 56Y 56Y 56Y Y56Y Y56Y S184T S213T S215T
Shaft Dia (mm) 22.2 22.2 22.2 22.2 22.2 28.6 34.9 34.9
575-3-60
Speed (r/s) 28.75 28.75 28.75 28.75 29.08 29.08 29.25 29.17
Shaft kW 1.50 2.24 2.24 2.24 3.73 3.73 5.60 7.46
Frame (NEMA) 56HZ 56HZ 56HZ 56HZ 184T 184T S213T D215T
Shaft Dia (mm) 22.2 22.2 22.2 22.2 28.6 28.6 34.9 34.9
230-3-50 and 400-3-50
Speed (r/s) 23.75 23.75 23.75 23.75 23.75 23.75 23.75 23.75
Shaft kW 1.79 2.16 2.16 3.73 3.73 3.73 5.60 7.46
Frame(NEMA) 56Y 56Y 56Y S184T S184T S184T S213T S215T
Shaft Dia (mm) 22.2 22.2 22.2 22.2 28.6 28.6 34.9 34.9
LEGEND
70
STANDARD DRIVE DATA, 60 Hz — ENGLISH
40RM 40RMQ 40RMS 40RMQ 40RM 40RMQ 40RMQ 40RMQ
40RM
UNIT 40RMS 40RMS
007 40RMS 010 40RMS 014
40RMS 40RMS 40RMS 034
008 012 016 024 028
MOTOR DRIVE
Motor Pulley Pitch Diameter (in.) 2.4-3.4 2.8-3.8 2.8-3.8 3.4-4.4 2.8-3.8 2.8-3.8 3.7-4.7 4.3-5.3 4.3-5.3
Pulley Factory Setting
2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (in.) 8.8 8.8 8.8 8.8 9.0 9.0 9.4 11.0 11.0
Pulley Bore (in.) 1 1 1 1 17/16 17/16 17/16 115/16 115/16
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—A 1—B 2—B* 2—B*
(2) 42.8 (2) 42.8
Belt Pitch (in.) 40.3 41.3 41.3 42.3 42.3 42.3 41.8
(2) 43.8 (2) 43.8
FAN SPEEDS (rpm)
Factory Settings 568 647 647 764 632 632 771 752 752
Range 470-666 549-745 549-745 666-863 537-728 537-728 679-863 682-841 674-831
Max Allowable Speed (rpm) 1200 1200 1200 1200 1200 1200 1200 1100 1100
Change per 1/2 turn of
Moveable Motor Pulley 19.6 19.6 19.6 19.7 19.1 19.1 15.3 13.1 13.1
Flange
MAX FULL TURNS FROM
CLOSED POSITION 5 5 5 5 5 5 6 6 6
10.44- 10.44- 10.44- 10.44- 10.44- 10.44- 9.12- 6.67- 6.67-
SHAFTS CENTER DISTANCE (in.) 12.32 12.32 12.32 12.32 12.32 12.32 10.99 9.43 9.43
*Four belts shipped with unit. Use correct set of 2 belts sized according to the pulley setting.
MEDIUM-STATIC DRIVE DATA, 60 Hz — ENGLISH

40RM 40RMQ 40RMS 40RMQ 40RM 40RMQ 40RM
40RMQ 40RMQ
UNIT 007 40RMS 40RMS 40RMS
010 40RMS 40RMS 40RMS 40RMS
014 034
008 012 016 024 028
MOTOR DRIVE
Full Turns Open 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 17/16 17/16 17/16 115/16 115/16
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—B 1—B 2—B* 2—B*
(2) 38.8 (2) 38.8
Belt Pitch (in.) 42.3 40.3 40.3 40.3 41.3 41.8 41.8
(2) 39.8 (2) 39.8
FAN SPEEDS (rpm)
Factory Setting 764 841 841 841 820 842 881 881 881
Range 666-863 733-949 733-949 733-949 715-926 742-943 798-984 798-984 798-984
Change per 1/2 Turn of
Flange
MAX FULL TURNS FROM
5 5 5 5 5 6 6 6 6
CLOSED POSITION
SHAFTS CENTER DISTANCE (in.) 10.44- 10.44- 10.44- 10.44- 10.44- 10.44- 9.16- 6.67- 6.67-
12.32 12.32 12.32 12.32 12.32 12.32 10.99 9.43 9.43
71
HIGH-STATIC DRIVE DATA, 60 Hz — ENGLISH
40RM
UNIT 40RMS 40RMS
007 40RMS 010 40RMS 014 40RMS 40RMS 40RMS 034
008 012 016 024 028
MOTOR DRIVE
Full Turns Open 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0
FAN DRIVE
Pulley Pitch Dia (in.) 7.0 6.0* 6.0 6.0 7.4 7.9 7.4 8.6 8.6
Pulley Bore (in.) 1 1 1 1 17/16 17/16 17/16 115/16 115/16
Belt No. — Section 1—A 1—A 1—A 1—A 1—B 1—B 2—B 2—B 2—B
Belt Pitch (in.) 41.3 37.3 37.3 37.3 39.8 39.8 36.8 37.8 37.8
FAN SPEEDS (rpm)
Factory Setting 961 1121 1121 1121 979 1060 1118 1024 1024
838- 978- 978- 978- 873- 950- 1014- 873- 873-
Range 1084 1200*† 1200† 1200† 1096 1171 1200† 1075 1075
Flange
MAX FULL TURNS FROM
10.44- 10.44- 10.44- 10.44- 10.44- 9.16- 8.16- 6.67- 6.67-
SHAFTS CENTER DISTANCE (in.) 12.32 12.32 12.32 12.32 12.32** 10.99 10.02 9.43 9.43
*Values for 3-phase motor shown. For single-phase motor, pulley pitch diameter is 7 in.
and resulting fan speed is 837-1096 rpm.
†It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT
exceed 1200 rpm.
**575-v unit has a center distance of 9.16-10.99.
STANDARD DRIVE DATA, 50 Hz — ENGLISH

40RM 40RMQ 40RMS 40RMQ 40RM 40RM
UNIT 40RMS 40RMQ 40RMQ 40RMQ
40RMS
007 40RMS 010 40RMS 40RMS 40RMS 40RMS
008 014 034
012 016 024 028
MOTOR DRIVE
Full Turns Open 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 17/16 17/16 17/16 115/16 115/16
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—A 1—B 2—B 2—B
Belt Pitch (in.) 39.3 39.3 39.3 40.3 42.3 42.3 41.8 43.8 43.8
FAN SPEEDS (rpm)
Factory Setting 517 588 588 695 618 618 795 622 622
Range 428-606 499-677 449-677 606-784 538-697 538-697 713-878 557-687 557-687
Flange
MAX FULL TURNS FROM
5 5 5 5 5 5 6 6 6
CLOSED POSITION
10.44- 10.44- 10.44- 10.44- 10.44- 10.44- 9.12- 6.67- 6.67-
SHAFTS CENTER DISTANCE (in.)
12.32 12.32 12.32 12.32 12.32 12.32 10.99 9.43 9.43
72
MEDIUM-STATIC DRIVE DATA, 50 Hz — ENGLISH
40RM 40RM
UNIT 40RM 40RMQ 40RMS 40RMQ 40RMS
40RMQ 40RMQ 40RMQ 40RMS
007 40RMS 010 40RMS 014
008 012 016 024 028
MOTOR DRIVE
2.5 2.5 2.5 2.5 2.5 3.0 2.5 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 17/16 17/16 17/16 115/16 115/16
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—B 1—A 2—B 2—B
Belt Pitch (in.) 40.3 41.3 41.3 37.3 39.3 39.8 36.8 39.8 39.8
FAN SPEEDS (rpm)
Factory Setting 695 794 794 926 741 756 916 728 728
Range 606-784 692-896 692-896 808-1045 646-836 667-848 814-1018 652-803 652-803
Flange
MAX FULL TURNS FROM
SHAFTS CENTER DISTANCE (in.) 10.44- 10.44- 10.44- 10.44- 10.44- 9.16- 9.16- 6.67- 6.67-
12.32 12.32 12.32 12.32 12.32 10.99 10.99 9.43 9.43
HIGH-STATIC DRIVE DATA, 50 Hz — ENGLISH

40RM 40RMQ 40RMS 40RM 40RM
UNIT 40RMQ 40RMS 40RMQ 40RMQ 40RMQ 40RMS
008 014 034
012 016 024 028
MOTOR DRIVE
2.5 2.5 2.5 3.0 2.5 3.0 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 17/16 17/16 17/16 115/16 115/16
Belt No. — Section 1—A 1—A 1—A 1—A 2—A 2—A 2—A 2—B 2—B
Belt Pitch (in.) 37.3 37.3 37.3 36.3 36.3 39.3 34.3 36.8 37.8
FAN SPEEDS (rpm)
Factory Setting 926 1010 1010 1166 926 916 1002 855 795
Range 808- 881- 881- 1036- 808- 814- 891- 766- 713-
1045 1140 1140 1200* 1045 1018 1113 944 878
Flange
MAX FULL TURNS FROM 5 5 5 6 5 6 6 6 6
CLOSED POSITION
10.44- 10.44- 10.44- 9.16- 9.16- 9.16- 8.16- 6.67- 6.67-
SHAFTS CENTER DISTANCE (in.)
12.32 12.32 12.32 10.99 10.99 10.99 10.02 9.43 9.43
*It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT exceed 1200 rpm.
73
STANDARD DRIVE DATA, 60 Hz — SI
40RM 40RM
UNIT 40RMS 40RMS
007 40RMS 010 40RMS 014
008 012 016 024 028
MOTOR DRIVE
61.0- 71.1- 71.1- 86.4- 71.1- 71.1- 94.0- 109.2- 109.2-
Motor Pulley Pitch Diameter (mm)
86.4 96.5 96.5 111.8 96.5 96.5 119.4 134.6 134.6
Pulley Factory Setting 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (mm) 224 224 224 224 229 229 239 279 279
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—A 1—B 2—B* 2—B*
(2) 1087 (2) 1087
Belt Pitch (mm) 1024 1049 1049 1074 1074 1074 1062
(2) 1113 (2) 1113
FAN SPEEDS (r/s)
Factory Setting 9.5 10.8 10.8 12.7 10.5 10.5 12.9 12.5 12.5
Range 7.8-11.1 9.2-12.4 9.2-12.4 11.1-14.4 9.0-12.1 9.0-12.1 11.3-14.4 11.4-14.0 11.2-13.9
Max Allowable Speed (r/s) 20.0 20.0 20.0 20.0 20.0 20.0 20.0 18.3 18.3
Flange
CLOSED POSITION
SHAFTS CENTER DISTANCE (mm) 265-313 265-313 265-313 265-313 265-313 265-313 232-279 169-240 169-240
MEDIUM-STATIC DRIVE DATA, 60 Hz — SI

40RMQ 40RMQ
014 034
008 012 016 024 028
MOTOR DRIVE
Motor Pulley Pitch Diameter (mm) 86.4- 86.4- 86.4- 86.4- 86.4- 94.0- 109.2- 109.2- 109.2-
111.8 111.8 111.8 111.8 111.8 119.4 134.6 134.6 134.6
Full Turns Open 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—B 1—B 2—B* 2—B*
(2) 986 (2) 986
Belt Pitch (mm) 1074 1024 1024 1024 1049 1062 1062 (2) 1011 (2) 1011
FAN SPEEDS (r/s)
Factory Setting 12.7 14.0 14.0 14.0 13.7 14.0 14.7 14.7 14.7
Range 11.1-14.4 12.2-15.8 12.2-15.8 12.2-15.8 11.9-15.4 12.4-15.7 13.3-16.4 13.3-16.4 13.3-16.4
Flange
MAX FULL TURNS FROM
5 5 5 5 6 6 6 6 6
CLOSED POSITION
74
HIGH-STATIC DRIVE DATA, 60 Hz — SI
40RM
UNIT 40RMS 40RMS
008 012 016 024 028
MOTOR DRIVE
86.4- 86.4- 86.4- 86.4- 94.0- 109.2- 109.2- 109.2- 109.2-
Motor Pulley Pitch Diameter (mm) 111.8 111.8 111.8 111.8 119.4 134.6 134.6 134.6 134.6
2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (mm) 178 152* 152 152 188 201 188 203 203
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. — Section 1—A 1—A 1—A 1—A 1—B 1—B 2—B 2—B 2—B
Belt Pitch (mm) 1049 947 947 947 1011 1011 935 935 960
FAN SPEEDS (r/s)
Factory Setting 16.0 18.7 18.7 18.7 16.3 17.7 18.6 17.1 17.1
Range 14.0-18.1 16.3-20.0*† 16.3-20.0† 16.3-20.0† 14.4-18.3 15.8-19.5 16.9-20.0† 14.6-17.9 14.6-17.9
Flange
MAX FULL TURNS FROM
SHAFTS CENTER DISTANCE (mm) 265-313 265-313 265-313 265-313 265-313** 232-279 207-255 169-240 169-240
*Values for 3-phase motor shown. For single-phase motor, pulley pitch †It is possible to adjust drive so that fan speed exceeds maximum
diameter is 178 mm and resulting fan speed is 14.0-18.3 r/s. allowable. DO NOT exceed 20 r/s.
**575-v unit has a center distance of 233-279.
STANDARD DRIVE DATA, 50 Hz — SI

40RM 40RMQ 40RMS 40RMQ 40RM 40RM
UNIT 40RMS 40RMQ 40RMQ 40RMQ
40RMS
008 012 014 034
016 024 028
MOTOR DRIVE
61.0- 71.1- 71.1- 86.4- 86.4- 86.4- 109.2- 109.2- 109.2-
Motor Pulley Pitch Diameter (mm) 86.4 96.5 96.5 111.8 111.8 111.8 134.6 134.6 134.6
Pulley Factory Setting 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—A 1—B 2—B 2—B
Belt Pitch (mm) 998 998 998 1024 1074 1074 1062 1113 1113
FAN SPEEDS (r/s)
Factory Setting 8.6 9.8 9.8 11.6 10.3 10.3 13.3 10.4 10.4
Range 7.1-10.1 8.3-11.3 8.3-11.3 10.1-13.1 9.0-11.6 9.0-11.6 11.9-14.6 9.3-11.5 9.3-11.5
Flange
CLOSED POSITION
75
MEDIUM-STATIC DRIVE DATA, 50 Hz — SI
40RM 40RM
UNIT 40RMS 40RMS
008 012 016 024 028
MOTOR DRIVE
86.4- 86.4- 86.4- 86.4- 86.4- 94.0- 101.6- 109.2- 109.2-
Motor Pulley Pitch Diameter (mm)
111.8 111.8 111.8 111.8 111.8 119.4 127.0 134.6 134.6
2.5 2.5 2.5 2.5 2.5 3.0 2.5 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. — Section 1—A 1—A 1—A 1—A 1—A 1—B 1—A 2—B 2—B
Belt Pitch (mm) 1024 1049 1049 947 998 1011 922 1011 1011
FAN SPEEDS (r/s)
Factory Setting 11.6 13.2 13.2 15.4 12.4 12.6 15.3 12.1 12.1
10.1- 11.5- 11.5- 13.5- 10.8- 11.1- 13.6- 10.9- 10.9-
Range
13.1 14.9 14.9 17.4 13.9 14.1 17.0 13.4 13.4
Flange
CLOSED POSITION
HIGH-STATIC DRIVE DATA, 50 Hz — SI

40RMQ 40RMQ
014 034
008 012 016 024 028
MOTOR DRIVE
Motor Pulley Pitch Diameter (mm) 86.4- 86.4- 86.4- 101.6- 86.4- 101.6- 101.6- 109.2- 109.2-
111.8 111.8 111.8 127.0 111.8 127.0 127.0 134.6 134.6
2.5 2.5 2.5 3.0 2.5 3.0 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. — Section 1—A 1—A 1—A 1—A 2—A 2—A 2—A 2—B 2—B
Belt Pitch (mm) 947 947 947 922 922 998 871 935 960
FAN SPEEDS (r/s)
Factory Setting 15.4 16.8 16.8 19.4 15.4 15.3 16.7 14.3 13.3
13.5- 14.7- 14.7- 17.3- 13.5- 13.6- 14.9- 12.8- 11.9-
Range
17.4 19.0 19.0 20.0* 17.4 17.0 18.6 15.7 14.6
Flange
MAX FULL TURNS FROM
5 5 5 6 5 6 6 6 6
CLOSED POSITION
*It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT exceed 20 r/s.
76
Guide specifications
Commercial Packaged Air-Handling Unit A. Base Unit:
HVAC Guide Specifications 1. Cabinet shall be constructed of mill-galvanized
steel.
Size Range: 2,400 to 12,000 Cfm (1150 to 5650 L/s),
Nominal Airflow, 6 to 30 Tons (21 to 2. Cabinet panels shall be fully insulated with
1/ -in. (12.7-mm) fire-retardant material. Insula-
105 kW), Nominal Cooling 2
tion shall contain an EPA-registered immobi-
Carrier Model Numbers: 40RM (Direct-Expansion Coil) lized antimicrobial agent to effectively resist the
40RMQ (Direct-Expansion growth of bacteria and fungi as proven by tests
Heat Pump Coil) in accordance with ASTM standards G21 and
40RMS (Chilled Water Coil) 22 (U.S.A.).
Part 1 — GENERAL 3. Unit shall contain non-corroding condensate
1.01 SYSTEM DESCRIPTION drain pans for both vertical and horizontal
A. Indoor, packaged air-handling unit for use in com- applications. Drain pans shall have connections
mercial split systems. Unit shall have a multiposition on right and left sides of unit to facilitate field
design and shall be capable of horizontal or vertical connection. Drain pans shall have the ability to
installation on a floor or in a ceiling, with or without be sloped toward the right or left side of the
ductwork. (Only vertical units are to be applied with- unit to prevent standing water from accumulat-
out ductwork.) ing in pans.
B. Unit with direct-expansion coil shall be used in a 4. Unit shall have factory-supplied 2-in. (51 mm)
refrigerant circuit with a matching air-cooled throwaway-type filters installed upstream from
condensing unit. Unit with chilled water coil shall be the cooling coil. Filter access shall be from
used in a chilled water circuit. either the right or left side of the unit.
1.02 QUALITY ASSURANCE B. Coils:
A. Coils shall be designed and tested in accordance Coils shall consist of 3 rows (40RM, 40RMQ008,
with ASHRAE 15 Safety Code for Mechanical 40RMS), or 4 rows (40RMQ012-028) of copper
Refrigeration (U.S.A.), latest edition. tubes with sine-wave aluminum fins bonded to the
tubes by mechanical expansion. Suction and liquid
B. Unit shall be constructed in accordance with ETL
(U.S.A.) and ETL, Canada, standards and shall carry line connections or supply and discharge connec-
tions shall be made on the same side of the coil.
the ETL and ETL, Canada, labels.
1. Direct-expansion coils shall feature factory-
C. Unit insulation and adhesive shall comply with
NFPA-90A (U.S.A.) requirements for flame spread installed thermostatic expansion valves (TXVs)
for refrigerant control. The TXVs shall be capa-
and smoke generation. Insulation shall contain an
ble of external adjustment. Direct-expansion
EPA-registered immobilized antimicrobial agent to
effectively resist the growth of bacteria and fungi as heat pump coils shall have a factory-installed
bypass line and check valve assembly around
proven by tests in accordance with ASTM standards
the TXVs to allow liquid flow from the coil to
G21 and 22 (U.S.A.).
the outdoor unit during the heating mode. Coil
D. Unit shall be manufactured in a facility registered to tubing shall be internally rifled to maximize heat
the ISO 9001:2000 manufacturing quality standard. transfer.
E. Direct-expansion and chilled water coils shall be 2. Chilled water coils shall be rated for an
burst and leak tested at 435 psi (2999 kPa). operating pressure of not less than 300 psig
1.03 DELIVERY AND STORAGE (2069 kPag).
Units shall be stored and handled per manufacturer’s C. Operating Characteristics:
recommendations. Unit shall be capable of providing cfm (L/s)
Part 2 — Products airflow at an external static pressure of in. wg
2.01 EQUIPMENT (kPag).
Indoor mounted, draw-thru, packaged air-handling D. Motor:
unit that can be used in a suspended horizontal con- 1. Fan motor of the size and electrical characteris-
figuration or a vertical configuration. Unit shall con- tics specified on the equipment schedule shall
sist of forward-curved belt-driven centrifugal fan(s), be factory supplied and installed.
motor and drive assembly, prewired fan motor con- 2. Motors rated at 1.3 through 3.7 hp (0.97
tactor, factory-installed refrigerant metering devices through 2.76 kW) shall have internal thermal
(direct-expansion coil units), cooling coil, 2-in. overload protection. Motors rated at 5, 71/2,
(51-mm) disposable air filters, and condensate drain and 10 hp (3.73, 5.60, and 7.46 kW) shall be
pans for vertical or horizontal configurations. protected by a circuit breaker.
77
Guide specifications (cont)
3. Evaporator-fan motor shall have permanently drawings. Electric heat assembly shall be ETL
lubricated, sealed bearings and inherent (U.S.A.) and ETL, Canada, agency approved,
automatic-reset thermal overload protection or and shall have single-point power wiring.
manual reset calibrated circuit breakers. Evapo- Heater assembly shall include contactors with
rator motors are designed specifically for 24-v coils, power wiring, 24-v control wiring
Carrier and do not have conventional horse- terminal blocks, and a hinged access panel.
power (hp) ratings listed on the motor Electric heaters shall not be used with air dis-
nameplate. Motors are designed and qualified in charge plenum.
the “air-over” location downstream of the 7. Air Discharge Plenum:
cooling coil and carry a maximum continuous
Plenum shall be factory-supplied to provide
bhp rating that is the maximum application bhp
free-blow air distribution for vertical floor-
rating for the motor; no “safety factors” above
that rating may be applied. mounted units. A grille with moveable vanes for
horizontal or vertical airflow adjustment shall be
4. All evaporator-fan motors 5 hp and larger shall included. Plenum shall be field-assembled and
meet the minimum efficiency requirements as field-installed on the unit’s fan deck for blow-
established by the Energy Policy Act of 1992 thru air distribution. Plenum shall not be used
(EPACT), effective October 24, 1997. with electric heaters.
E. Special Features: 8. Return-Air Grille:
1. Alternate Motor and Drive: Grille shall be factory-supplied for field installa-
An alternate motor and/or medium-static or tion on the unit’s return air opening.
high-static drive shall be available to meet the 9. Unit Subbase:
airflow and external static pressure require-
ments specified on the equipment schedule. Subbase assembly shall be factory-supplied for
field installation. Subbase shall elevate floor-
2. High-Capacity Coil: mounted vertical units to provide access for
The high-capacity coil consists of 4 rows of correct condensate drain connection.
3/ -in. copper tubes with sine-wave aluminum
8 10. Economizer:
fins bonded to the tubes by mechanical expan-
Economizer for ventilation or “free” cooling
sion. Coil tubing shall be internally rifled to
maximize heat transfer. Suction and liquid line shall be factory provided for field installation on
either return air opening of air handler. For free
connections shall be made on the same side of
cooling applications, economizer shall be com-
the coil. Direct-expansion coils shall feature
factory-installed thermostatic expansion valves patible with separate thermostat; economizer
dampers shall open when outdoor air enthalpy
(TXVs) for refrigerant control. The TXVs shall
is suitable for free cooling. Economizer shall be
be capable of external adjustment.
compatible with separate CO2 sensor acces-
3. External Paint: sory; economizer dampers shall open when
Where conditions require, units shall be painted indoor CO2 level rises above predetermined set
with an American Sterling Gray finish. point. Economizer shall include enthalpy con-
4. Hot Water Coil: trol and damper actuator.
Coil shall be 2-row, U-bend coil with copper 11. Thermostat Controls:
tubes and aluminum plate fins bonded to the a. Debonair® programmable multi-stage ther-
tubes by mechanical expansion. Coil shall be mostat with 7-day clock, holiday scheduling,
mounted in a galvanized steel housing that shall large Thermoglow™ display, remote sensor
be fastened to the unit’s fan deck for blow-thru capability, and Title 24 compliance.
heating operation. Coil shall have maximum b. TEMP System programmable communicat-
working pressure of 150 psig (1034 kPag). ing multi-stage thermostat with fan switch,
5. Steam Distributing Coil: time clock, LCD display, °F/°C capability,
Coil shall consist of one row of copper tubes and CCN (Carrier Comfort Network®)
with aluminum plate fins, and shall have inner compatibility.
steam distributing tubes. Coil shall be mounted in c. Commercial Electronic Thermostat with
a galvanized steel housing and shall be fastened 7-day timeclock, auto-changeover, multi-stage
to the unit’s fan deck for blow-thru heating oper- capability, and large LCD temperature display.
ation. Coil shall have maximum working pres- d. Carrier PremierLink™ Controller:
sure of 20 psig at 260 F (138 kPag at 126 C).
This control will function with CCN and
6. Electric Heaters: ComfortVIEW™ software. It shall also be
Heaters for nominal 240, 480, or 575-volt, compatible with ComfortLink™ controllers.
3-phase, 60 Hz; and 240, 400-volt, 3 phase, It shall be ASHRAE 62-99 compliant and
50 Hz power supply shall be factory-supplied Internet ready. It shall accept a CO2 sensor in
for field installation as shown on the equipment the conditioned space and be Demand
78
Control Ventilation (DCV) ready. The com- measure individual lamp output. Lamp
munication rate must be 38.4K or faster. output at 253.7 nm shall not be less than
It shall include an integrated economizer 10µW/cm2 per inch of arc length measured
controller. at a distance of one meter.
12. Overhead Suspension Package: b. UV-C power supplies shall be high effi-
Package shall include necessary brackets to sup- ciency, electric type which are matched to
port units in a horizontal ceiling installation. the emitters and are capable of producing
the specified output intensity with an input
13. CO2 Sensor:
power no more than 80 watts.
Sensor shall provide the ability to signal the
c. Emitters and fixtures shall be installed in
economizer to open when the space CO2 level sufficient quantity and arranged so as to
exceeds the predetermined set point. Sensor
provide an equal distribution of UV-C energy
shall have the capability of being connected to
on the coil and drain pan.
Comfort System relay pack or to economizer
using field-supplied and field-installed Honey- d. The minimum UV-C energy striking the
well dc adapter no. Q769C1004. leading edge of the coil fins shall be not less
than 820 µW/cm2 at the closest point and
14. Condensate Drain Trap: through placement, not less than 60% of
Trap shall have transparent, serviceable design that value at the farthest point. Equal
for easy cleaning. Kit shall include overflow amounts are to strike the drain pan, either
shutoff switch and wiring harness for connec- directly or indirectly through reflection.
tion to an alarm if desired.
e. Emitters and fixtures shall be installed at
15. UV-C Germicidal Lamps: right angles to the conforming lines of the
a. UV-C emitters and fixtures shall be specifi- coil fins, such that through incident angle
cally designed for use inside an HVAC reflection, UV-C energy strikes all target sur-
system. An ASME nozzled test apparatus faces of the coil, drain pan, and the available
using a 45 F (7.2 C) airstream moving at not line of sight airstream.
less than 400 fpm (189 liters/sec.) shall
79
Carrier Corporation • Syracuse, New York 13221 1005 9-05
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1 3 4 New Book 2 Pg 80 Catalog No. 04-52400001-01 Printed in U.S.A. Form 40RM-10PD
Tab 3c 1a 2e Tab 2PA Replaces: 40RM-9PD

Manejadora Carrier 40RM-10pd

Uploaded by

Copyright:

Available Formats

Manejadora Carrier 40RM-10pd

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manejadora Carrier 40RM-10pd

Uploaded by

Copyright:

Available Formats

What are some of the features and benefits of the 40RM series air handling units?

What are some of the features and benefits of the 40RM series air handling units?

How do the 40RM series units address indoor air quality?

How do the 40RM series units address indoor air quality?

Product 40RM007-034

Carrier’s versatile packaged air-

Copyright 2005 Carrier Corporation Form 40RM-10PD

40RM — Commercial Packaged Factory-Installed Options

UNIT SIZE AVAILABILITY

DIRECT-EXPANSION COIL Enhanced Copper Tubes, Aluminum Sine-Wave Fins

PREMIERLINK™ COMMUNICATING CONTROLS

40RM WITH ECONOMIZER

UV-C GERMICIDAL LAMPS

UNIT UNIT WEIGHT

Steam Coil or Base Unit Fan Coil Economizer

UNIT OR CORNER NUMBER (WEIGHT IN LB)

UNIT OR CORNER NUMBER (WEIGHT IN KG)

NOTE: Steam, Hot Water & Plenum

UNIT OR CORNER NUMBER (WEIGHT IN KG)

UNIT SIZES 007-012

UNIT SIZES 014-024

UNIT SIZES 028,034

NOTE: Dimensions in [ ] are millimeters.

UNIT SIZES 014-024

NOTE: Dimensions in [ ] are millimeters.

NOTE: Dimensions in [ ] are millimeters.

DIMENSION HOT WATER COIL STEAM COIL

UNIT SIZES 014-024

DIMENSION HOT WATER COIL STEAM COIL

DIMENSION HOT WATER COIL STEAM COIL

UNIT SIZES 014-024

UNIT SIZES 028,034

UNIT SIZES 014-034

HEATING CORRECTION FACTORS — ENGLISH HEATING CORRECTION FACTORS — SI

STEAM COIL STEAM COIL

*With standard 3-row coil.

*With standard 3-row coil.

*With standard 3-row coil.

*With standard 3-row coil.

*With standard 3-row coil.

*With standard 3-row coil.

*With standard 3-row coil.

See Legend and Notes on page 54.

UNIT EXTERNAL STATIC PRESSURE (in. wg)

See Legend and Notes on page 54.

See Legend and Notes on page 54.

UNIT EXTERNAL STATIC PRESSURE (in. wg)

See Legend and Notes on page 54.

UNIT EXTERNAL STATIC PRESSURE (Pa)

See Legend and Notes on page 54.

See Legend and Notes on page 54.

UNIT EXTERNAL STATIC PRESSURE (Pa)

See Legend and Notes on page 54.

See Legend and Notes on page 54.

FACTORY-SUPPLIED FILTER PRESSURE DROP FACTORY-SUPPLIED FILTER PRESSURE DROP

AIRFLOW VANE DEFLECTION AIRFLOW VANE DEFLECTION

TERMINAL VELOCITY THROW FACTOR

ACCESSORY PRESSURE DROP — SI (Pa)

HEATER ACTUAL HEATER VOLTAGE

HEATER ACTUAL HEATER VOLTAGE