Scribd
Upload
108 views1 page

GT 111

This document analyzes the strength of a rock sample using RocLab software. It determines the rock's intact strength, modulus, and Hoek-Brown failure criterion parameters based on testing. It then calculates the rock mass strength parameters including tensile strength, compressive strength, deformation modulus, and fitting to the Mohr-Coulomb failure model.

Uploaded by

Mayank Dixit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views1 page

GT 111

This document analyzes the strength of a rock sample using RocLab software. It determines the rock's intact strength, modulus, and Hoek-Brown failure criterion parameters based on testing. It then calculates the rock mass strength parameters including tensile strength, compressive strength, deformation modulus, and fitting to the Mohr-Coulomb failure model.

Uploaded by

Mayank Dixit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Analysis of Rock Strength using RocLab

Hoek-Brown Classification
intact uniaxial comp. strength (sigci) = 25 MPa
4.0 GSI = 40 mi = 15 Disturbance factor (D) = 0
intact modulus (Ei) = 6250 MPa
3.8 modulus ratio (MR) = 250
Hoek-Brown Criterion
3.6 mb = 1.760 s = 0.0013 a = 0.511
Mohr-Coulomb Fit
3.4 cohesion = 0.184 MPa friction angle = 54.17 deg
Rock Mass Parameters
3.2 tensile strength = -0.018 MPa
uniaxial compressive strength = 0.827 MPa
3.0 global strength = 4.274 MPa
deformation modulus = 997.83 MPa
2.8

2.6
Major principal stress (MPa)

2.4

2.2

2.0

1.8

1.6

1.4 1.4

1.2 1.2

Shear stress (MPa)


1.0 1.0

0.8 0.8

0.6 0.6

0.4 0.4

0.2 0.2

0.0 0.2 0.4 0.0 0.2 0.4 0.6 0.8 1.0


Minor principal stress (MPa) Normal stress (MPa)

You might also like