7.X Ray Manuel Book
7.X Ray Manuel Book
7.X Ray Manuel Book
Usage:
Take x-ray photography of the head, extremities, chest cavity and other parts of human,
Main features:
4. Prestore 8 kinds of photography parameters and select, modify, store the parameters under
the condition of choice
6. Premier high voltage with high power SCR zero control circuit
7. Function of load chains, exposure time control, auto alarm, preheat filament, subasse
mblies’ temperature control, and so on.
1. Power supply
Voltage: 180-240 V
Frequency: 50HZ
Rating ≥8k VA
1. Photography:
Voltage: 50-100 kV
4. Prestore 8 kinds of photography parameters and select, modify, store the parameters under
the condition of choice
6. Premier high voltage with high power SCR zero control circuit
7. Function of load chains, exposure time control, auto alarm, preheat filament, subassemblies
temperature control, and so on
1. Power supply
Voltage: 180-240 V
Frequency: 50HZ
Rating ≥8k VA
2. Photography:
Voltage: 50-100 kV
Technical data:
(in breadth):200mm
Ray-filter
Grid density N28
Convergence distance of 100cm
Grid ratio R8
Moving in length along
1800mm or 1600mm
radiographic table
Distance to ground as moving
up and down (along 630mm~1750mm
Pillar of X-ray tube upright post)
unit Rotary around the center of
±180º
cross arm
Rotary around the shaft line of
-10º~60º~+120º
X-ray annular tubes
Max size of cassette
356mm×432mm(14"×17")
for radiography
Main features:
2. High visual and operational Console with tube voltage ,tube current, and photography time
display on the LCD monitor
3. Prestore 8 kinds of photograph parameters and select, modify, store the parameters under
condition of choice
4. Auto power and voltage control, kV continuous adjustable, auto Fault Alarm
5. Premier high voltage with high power SCR zero control circuit
7. Photography bed, column, Vibration Filter limiter intergrated equipment without necessity
of up-and-down tunnel
8. Photography bed can be moved both laterally and vertically, column can turn 4*90°
9. Function of load chains, exposure time control, start and stop rotating anode, Preheat
filament, subassembly temperature control, etc.
10. Shipping volume(LWH): 244cm 113cm 102cm, 2.81m³
Detailed Description
Technical data:
X-ray tube: model XD51-20.40/125, focus: Small focus: 1×1mm, Big focus: 2×2mm
Main features:
2. High visual and operational Console with tube voltage, tube current, and photographic time
displayed on the LCD monitor
3. Prestore 8 kinds of photograph parameters and select, modify, store the parameters under
condition of choice
4. Auto power and voltage control, kV continuous adjustable ,auto Fault Alarm
5. Premier high voltage with high power SCR zero control circuit
8.Photography bed can be moved both laterally and vertically, column can turn 4*90°
9. Function of load chains, exposure time control, start and stop rotating mode, Preheat
filament, subassembly temperature control, etc.
GW:538KG.
I Usage
Orthopaedics:osteopathy, diaplasis, nailing Surgery: removing foreign body, cardiac
catheter, implanting pace maker, interventional therapy, partial radiography, local
photography, and other work.
II Features
1、 With a compact appearance, and easy to operate
2、 Unique base electric auxiliary support arm design, it's more security for using.
3、 A unique hand-held controller design, convenient to operate
4、 With a high-quality knockdown X-ray generator to reduce radiation
5、 With the Perspective KV,MA automatically track fluoroscopy to make the image
brightness and clearness optimum
6、 Toshiba image intensifier, the quality is stable and reliable, a good image clarity
7、 Clinical Video system with high performance,
8 images storage volume, and two 14〞high-resolution monitors
8、 Installation of dense grain grids, to further enhance image sharpness
III Basic configurations:
1. C-arm mainframe
one set
2. Combined high-frequency high-voltage X-ray generator and high-frequency power
3. imported 9 inch image intensifier
one set
4. Imported medical ultra-low illumination CCD radiography
one set
5. Imported dense grain grids
one set
6. Electrical adjustable beam limiting device
one set
7. High-definition progressive output CCU control system
one set
8.14-inch high-definition medical dedicated monitor
one set
9. Unique hand-held controller
one set
10. Digital workstation with 19” LCD display
one set
(50KW,650mA)
Ⅰ Specifications
The electrical properties
Power Output : 50 KW
Inverter Frequency : 60 kHz
Dual-focus : Small focus: 0.6 Large focus: 1.2
Thermal capacity :900kJ (1200 KHU)
The speed of the rotary anode : 8400rpm
Tube Voltage : 40~150kV
Tube Current : 10-650mA
mAs : 0.1~1000mAs
AEC Optional :AEC Can control the shortest time 5ms
Power supply : 380V 50/60HZ
DQE :≥70%
Imaging time : ≤12s
Image Workstations
1 acquisition module :Gigabit network acquisition,Adaptive image enhancement processing
2 Image processing system : Photo processing software, X-ray synchro Control software, motion
control software
Image post-processing: tissue equilibrium,W/L adjustment,Gamma correction, interest district,
reversed phase, noise reduction, smooth, sharpen,pseudo color, Edge extraction, shadow compensation,
filter neuclear, single window,dual-window, four windows, movement, right rotated 90°,left rotated
90°,level mirror image,vertical mirror image, magnifying glass, image zooming, reset, layer
information, label character, drawing label, length measurement, angle measurement,rectangular
length, rectangular area, elliptic length, elliptic area
3 Image storage and transmission: Dicom direct transmission, Dicom Worksite SCU, standard
Dicom, DIR, film printing, mass storage(hard disk, compact disk)
Basic Configuration
4 17〞×17〞Digital flat
9 Collimator
10 AEC ionization chamber
Feature
1, Amorphous silicon flat detector, use the advanced manufacturing technology with super stability
2, the detector can move with large scale of 17”×17” effective detection area.can meet all kinds of
parts to shoot.
3, The electric lift and rotatable newly designed U-shaped frame can meet the photographic
requirements of different standing and lying positions. The U-shaped design can make the operation
much more convenient and flexible.
4, The leading domestic high power compact high frequency X-ray generator and high frequency
power inverter makes the machine much more compact and more convenient without the extra
high-voltage generator and cable.
5, Newly designed photographic bed used specially for the U-shaped arm X-ray machine. The bed
floating and electromagnetic lock design makes it convenient for the accurate position of the lying
patient.
6, Specially designed working station for DR adopts all-digital intelligent touchable LCD control
system which is graphic and real color. This system makes the operation easier and more convenient.
7, Apply different photographic parameters according to the human characteristics, such as multi-site,
multi-position, muti-body shape, adult and children etc. The parameters can be modified and stored at
will and make the operation more convenient.
8, The high quality high frequency high-voltage X-ray generator and high frequency power inverter
can produce high-definition and good contrast images by high quality radiation and low dose.
9, The application of the KV and MA digital closed-loop control technology and the real time control
of the microprocessor ensure the accuracy and repeatability of the dose.
10, The multiple automatic protection features and fault tips ensure safety during the operation
process.
11, Support Dicom 3.0. convenient to connect with PACS system to print and transmission.
12, Three control mode for Mechanical movement:close-table control,hand-remote control,Cell