DR 3: Adjustment Data and Scales Parameter Channel 1
DR 3: Adjustment Data and Scales Parameter Channel 1
DR 3: Adjustment Data and Scales Parameter Channel 1
SKU
30 May 2014
Set value 1 1
Set value 2 2
DR 11 : Commands : Channel 1
DR 12 : Commands : Channel 2
Page 1
Data Records of the Scales SIWAREX U: FLASKS.SKU
30 May 2014
Status byte
Bit 0 :0 Asyn. error occured
Bit 1 :0 Syn. error occured
Bit 2 :0 Limit value 1 active
Bit 3 :0 Limit value 2 active
Bit 4 :0 Scales adjusted
Reserve 0
Actual digit value 0
Asynchronous errors
Bit 0 :0 Control limit exceeded
Bit 1 :0 Minimum voltage has been passed below
Bit 2 :0 Watchdog error
Bit 3 :0 EPROM error (program)
Bit 4 :0 EEPROM error (data)
Bit 5 :0 RAM-error (read-write error)
Bit 6 :0 A/D converter error during read-access
Bit 7 :0 Counting overflow gross value
Bit 8 :0 External power supply
Synchronous errors
Bit 0 :0 Distance adjustment points too small
Bit 1 :0 Command not executed (fault)
Bit 2 :0 Channel not available
Bit 3 :0 Undefined code
Bit 4 :0 Unknown data record
Bit 5 :0 Command inpossible, scales were not adjusted
Bit 6 :0 Waiting time of 5 seconds not adhered to
Bit 7 :0 Adjustment weight is negative
Page 2
Data Records of the Scales SIWAREX U: FLASKS.SKU
30 May 2014
Status byte
Bit 0 :0 Asyn. error occured
Bit 1 :0 Syn. error occured
Bit 2 :0 Limit value 1 active
Bit 3 :0 Limit value 2 active
Bit 4 :0 Scales adjusted
Reserve 0
Actual digit value 0
Asynchronous errors
Bit 0 :0 Control limit exceeded
Bit 1 :0 Minimum voltage has been passed below
Bit 2 :0 Watchdog error
Bit 3 :0 EPROM error (program)
Bit 4 :0 EEPROM error (data)
Bit 5 :0 RAM-error (read-write error)
Bit 6 :0 A/D converter error during read-access
Bit 7 :0 Counting overflow gross value
Bit 8 :0 External power supply
Synchronous errors
Bit 0 :0 Distance adjustment points too small
Bit 1 :0 Command not executed (fault)
Bit 2 :0 Channel not available
Bit 3 :0 Undefined code
Bit 4 :0 Unknown data record
Bit 5 :0 Command inpossible, scales were not adjusted
Bit 6 :0 Waiting time of 5 seconds not adhered to
Bit 7 :0 Adjustment weight is negative
Version 112H
Checksum 21414
Switches 0
Scales type 2 Two Channels
Reserve 0
Page 3