Scribd Logo
Upload

Welcome to Scribd!

  • 112 views

    PowerShift Simple Block Diagram V1

    Uploaded by

    Marcel
    PowerShift is a 1U shelf that provides power distribution for radio equipment. It uses capacitive jumper boxes connected to the radios with short cables and connected to the PowerShift shelf with long cables up to 300 meters. The PowerShift shelf then distributes power to up to 9 radios through isolators and wiring harnesses. Proper cable management is important when deploying the PowerShift system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PowerShift Simple Block Diagram V1

    Uploaded by

    Marcel
    112 views1 page
    PowerShift is a 1U shelf that provides power distribution for radio equipment. It uses capacitive jumper boxes connected to the radios with short cables and connected to the PowerShift shelf with long cables up to 300 meters. The PowerShift shelf then distributes power to up to 9 radios through isolators and wiring harnesses. Proper cable management is important when deploying the PowerShift system.

    Original Description:

    PowerShift Simple Block Diagram

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    PowerShift is a 1U shelf that provides power distribution for radio equipment. It uses capacitive jumper boxes connected to the radios with short cables and connected to the PowerShift shelf with long cables up to 300 meters. The PowerShift shelf then distributes power to up to 9 radios through isolators and wiring harnesses. Proper cable management is important when deploying the PowerShift system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    112 views1 page

    PowerShift Simple Block Diagram V1

    Uploaded by

    Marcel
    PowerShift is a 1U shelf that provides power distribution for radio equipment. It uses capacitive jumper boxes connected to the radios with short cables and connected to the PowerShift shelf with long cables up to 300 meters. The PowerShift shelf then distributes power to up to 9 radios through isolators and wiring harnesses. Proper cable management is important when deploying the PowerShift system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    CommScope PowerShift Simple Deployment Diagram

    Radio specific connection with short


    cable from Capacitive Jumper Box

    Outdoor ruggedized
    connectors field installed
    Long Cable run.
    Capacitive Jumper Box
    up to 200m 10mm2
    mounted using hose clamps
    200m up to 300m 16mm2

    9 isolators Distribution

    9 * 22 Amp Wiring harness with


    Green Anderson SB50 connectors

    C B A PowerShift
    Input wiring harness with Anderson
    SB120 connectors
    PowerShift is a 1U shelf.
    Consideration should be given to
    cable management requirements 125A 125A 125A DC Power Each PowerShift module will
    when deploying require a 125A circuit from the DC
    System power system

    Page 1

    C2 General

    You might also like