Scribd
Upload
108 views4 pages

Stiffeners: (MM) (MM) (MM)

The document specifies the design of transverse stiffeners on a column. The stiffeners have a length of 250 mm, width of 120 mm, and thickness of 10 mm. They are welded to the column web with a 5/16 inch fillet weld. Calculations are shown for the capacity of the stiffeners in axial tension and compression, as well as the capacity of the flange and web welds. The stiffener design meets the minimum requirements of AISC 360-10.

Uploaded by

Md Ahsanul Kabir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
108 views4 pages

Stiffeners: (MM) (MM) (MM)

The document specifies the design of transverse stiffeners on a column. The stiffeners have a length of 250 mm, width of 120 mm, and thickness of 10 mm. They are welded to the column web with a 5/16 inch fillet weld. Calculations are shown for the capacity of the stiffeners in axial tension and compression, as well as the capacity of the flange and web welds. The stiffener design meets the minimum requirements of AISC 360-10.

Uploaded by

Md Ahsanul Kabir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

STIFFENERS

Transverse stiffeners

Section : PL 1x12x25
Position : Both
Full depth : No
Length : 250 mm
Ls: Transverse stiffeners length : 250 mm
bs: Transverse stiffeners width : 120 mm
cc: Corner clip length : 12 mm
cc: Corner clip width : 12 mm
ts: Transverse stiffener thickness : 10 mm
Material : A572 Gr50
Weld type : Fillet
Welding electrode to support : E70XX
D: Weld size to support (1/16 in) : 5
Column web panel zone stiffeners
Stiffener type : Without stiffener

Design code: AISC 360-10 LRFD

Transverse stiffeners
Length [mm] 250.00 250.00 -- Sec. J10.8
lsmin = (dc - 2*tcf)/2
= (524[mm] - 2*12[mm])/2
= 250[mm] Sec. J10.8

Width [mm] 120.00 97.00 -- Sec. J10.8


bsmin = b/3 - tw/2
= 300[mm]/3 - 6[mm]/2
= 97[mm] Sec. J10.8

Thickness [mm] 10.00 10.00 -- Sec. J10.8


HasOppositeConnectionFalse

tsmin = Max(tp*0.5, bs/16)


= Max(20[mm]*0.5, 120[mm]/16)
= 10[mm] Sec. J10.8

Weld size [1/16in] 5 4 -- DG 13 Eq. 4.3-6


wmin = (0.943*Fys*tp)/FEXX
= (0.943*344.74[N/mm2]*10[mm])/482.63[N/mm2]
= 6.74[mm] DG 13 Eq. 4.3-6

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Transverse stiffeners - top


Yielding strength due to axial load [KN] 670.17 351.17 COMB 0.52 Eq. J4-1
Ag = 2 * ((bs - clip)*tp)
= 2 * ((120[mm] - 12[mm])*10[mm])
= 2160[mm2] Sec. D3.1

Rn = *Fy*Ag
= 0.9*344.74[N/mm2]*2160[mm2]
= 670.17[kN] Eq. J4-1
Compression [KN] 531.57 0.00 COMB 0.00 Sec. J4.4
r = tp/(12)1/2
= 10[mm]/(12)1/2
= 2.89[mm] Sec. E2

Ag = Lp*tp
= 108[mm]*10[mm]
= 1080[mm2] Sec. D3-1

K*L/r>250.65*250[mm]/2.89[mm]>25True

Fe = π2*E/(K*L/r)2
= π2*2.00E+05[N/mm2]/(0.65*250[mm]/2.89[mm])2
= 622.77[N/mm2] Eq. E3-4

Fe> = 0.44*Q*Fy622.77[N/mm2]>
= 0.44*1*344.74[N/mm2]True

Fcr = 0.658(Q*Fy/Fe)*Fy
= 0.658(1*344.74[N/mm2]/622.77[N/mm2])*344.74[N/mm2]
= 273.44[N/mm2] Eq. E7-2

Pn = 2 * (*Fcr*Ag)
= 2 * (0.9*273.44[N/mm2]*1080[mm2])
= 531.57[kN] Sec. J4.4

Flange weld capacity [KN] 731.84 351.17 COMB 0.48 Eq. J2-4
L = bst - clip - w
= 120[mm] - 12[mm] - 7.94[mm]
= 100.06[mm] Comm. J10.8

LoadAngleFactor = 1 + 0.5*(sin())1.5
= 1 + 0.5*(sin(1.57))1.5
= 1.5 p. 8-9

Fw = 0.6*FEXX*LoadAngleFactor
= 0.6*482.63[N/mm2]*1.5
= 434.37[N/mm2] Sec. J2.5

Aw = (2)1/2/2*D/16 [in]*L
= (2)1/2/2*5/16 [in]*100.06[mm]
= 561.62[mm2] Sec. J2.4

Rn = 4 * (*Fw*Aw)
= 4 * (0.75*434.37[N/mm2]*561.62[mm2])
= 731.84[kN] Eq. J2-4

Web weld capacity [KN] 1121.76 351.17 COMB 0.31 Eq. J2-4
L = l - clip - w
= 250[mm] - 12[mm] - 7.94[mm]
= 230.06[mm] Comm. J10.8

Fw = 0.6*FEXX
= 0.6*482.63[N/mm2]
= 289.58[N/mm2] Sec. J2.4

Aw = (2)1/2/2*D/16 [in]*L
= (2)1/2/2*5/16 [in]*230.06[mm]
= 1291.26[mm2] Sec. J2.4

Rn = 4 * (*Fw*Aw)
= 4 * (0.75*289.58[N/mm2]*1291.26[mm2])
= 1121.76[kN] Eq. J2-4

Transverse stiffeners - bottom


Yielding strength due to axial load [KN] 670.17 0.00 COMB 0.00 Eq. J4-1
Ag = 2 * ((bs - clip)*tp)
= 2 * ((120[mm] - 12[mm])*10[mm])
= 2160[mm2] Sec. D3.1

Rn = *Fy*Ag
= 0.9*344.74[N/mm2]*2160[mm2]
= 670.17[kN] Eq. J4-1

Compression [KN] 531.57 381.17 COMB 0.72 Sec. J4.4


r = tp/(12)1/2
= 10[mm]/(12)1/2
= 2.89[mm] Sec. E2

Ag = Lp*tp
= 108[mm]*10[mm]
= 1080[mm2] Sec. D3-1

K*L/r>250.65*250[mm]/2.89[mm]>25True

Fe = π2*E/(K*L/r)2
= π2*2.00E+05[N/mm2]/(0.65*250[mm]/2.89[mm])2
= 622.77[N/mm2] Eq. E3-4

Fe> = 0.44*Q*Fy622.77[N/mm2]>
= 0.44*1*344.74[N/mm2]True

Fcr = 0.658(Q*Fy/Fe)*Fy
= 0.658(1*344.74[N/mm2]/622.77[N/mm2])*344.74[N/mm2]
= 273.44[N/mm2] Eq. E7-2

Pn = 2 * (*Fcr*Ag)
= 2 * (0.9*273.44[N/mm2]*1080[mm2])
= 531.57[kN] Sec. J4.4

Flange weld capacity [KN] 731.84 381.17 COMB 0.52 Eq. J2-4
L = bst - clip - w
= 120[mm] - 12[mm] - 7.94[mm]
= 100.06[mm] Comm. J10.8

LoadAngleFactor = 1 + 0.5*(sin())1.5
= 1 + 0.5*(sin(1.57))1.5
= 1.5 p. 8-9

Fw = 0.6*FEXX*LoadAngleFactor
= 0.6*482.63[N/mm2]*1.5
= 434.37[N/mm2] Sec. J2.5

Aw = (2)1/2/2*D/16 [in]*L
= (2)1/2/2*5/16 [in]*100.06[mm]
= 561.62[mm2] Sec. J2.4

Rn = 4 * (*Fw*Aw)
= 4 * (0.75*434.37[N/mm2]*561.62[mm2])
= 731.84[kN] Eq. J2-4

Web weld capacity [KN] 1121.76 381.17 COMB 0.34 Eq. J2-4
L = l - clip - w
= 250[mm] - 12[mm] - 7.94[mm]
= 230.06[mm] Comm. J10.8

Fw = 0.6*FEXX
= 0.6*482.63[N/mm2]
= 289.58[N/mm2] Sec. J2.4

Aw = (2)1/2/2*D/16 [in]*L
= (2)1/2/2*5/16 [in]*230.06[mm]
= 1291.26[mm2] Sec. J2.4

Rn = 4 * (*Fw*Aw)
= 4 * (0.75*289.58[N/mm2]*1291.26[mm2])
= 1121.76[kN] Eq. J2-4

You might also like