Scribd
Upload
217 views13 pages

Bbu Config

1) Export a sample file from an existing site to make changes to parameters for a new site. 2) Import the converted file with changes back into the offline planning tool. 3) Select the deployment file saved previously and redo any missed deployment tasks like downloading software or configurations.

Uploaded by

raj1978enator
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
217 views13 pages

Bbu Config

1) Export a sample file from an existing site to make changes to parameters for a new site. 2) Import the converted file with changes back into the offline planning tool. 3) Select the deployment file saved previously and redo any missed deployment tasks like downloading software or configurations.

Uploaded by

raj1978enator
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 13

1)EXPORT  file

2) make changes in exported sample file of existing site in your laptop according to new site
parameter

3) import converted file

4) autodeploy

1) EXPORT

Node templet , radio templet and cell templet can not be empty so make these templets one by one
as below
Give Names to these templets like Wakiso_xxxx and once we save it here the same name will be
shown in dropdown menu of excel to select in templet
Find in excel cell templet , node templet and radio templet and add following

Also make change in PCI/PRACH/IP/NAME/ENODEBID/TAC

Now import back the saved excel( which we are working on and making changes) to cme offline
planned area
Export auto deployment
We can select all three i.e. download site s/w, config and activate site if all successful then confirm
and go to device maintenance(to see) and licence(upload) then unlock sectors.
Add
Select bombo folder
Now we were lost so deleted completed bombo line in autodeployment which reappear after below
step.. which include selecting bombo cfg data from autodepoloyment folder in laptop

IMPORt deployment list by clicking small arrow on left corner

Select the file already saved on ur laptop from autodeployment folder made during previous steps
Then redo all three task which by mistake left out ( normal first three check box ) in task parameter
setting

You might also like