Scribd
Upload
47 views2 pages

Conventional Technology Gen Iii Technology - Rapidcap: Statistics: Statistics

The document compares conventional technology for oil extraction to Gen III RapidCap technology. RapidCap technology allows for extraction from greater depths and higher pressures and temperatures, with a smaller footprint. It has higher production flow rates and can handle more extreme conditions.

Uploaded by

Firstface Lastbook
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views2 pages

Conventional Technology Gen Iii Technology - Rapidcap: Statistics: Statistics

The document compares conventional technology for oil extraction to Gen III RapidCap technology. RapidCap technology allows for extraction from greater depths and higher pressures and temperatures, with a smaller footprint. It has higher production flow rates and can handle more extreme conditions.

Uploaded by

Firstface Lastbook
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Conventional Technology Gen III Technology - RapidCapTM

Statistics: Statistics:
Dry weight 110 tonnes Dry weight 42 tonnes
Depth 10,000 feet Depth 12,000 feet
Temperature 250ºF Temperature 250ºF
Pressure 15,000 psi Pressure 15,000 psi
Footprint 40 feet x 20 feet Footprint 25 feet x 9 feet
SAM required ROV operated
Prod. Flow Rates 100,000 bpd Prod. Flow Rates 330,000 bpd
Design Requirements Requirement Value
Maximum Rated Water Depth 12,000 ft
Rated Working Pressure (Wellbore Equipment) 15,000 psi
Storage: 20 years
Design Life Operational: 2 years subsea shut-in
Operational: 6 months flowing
Product Specification Level (Wellbore Equipment) PSL 3
Temperature Rating (Structural Steel) -20°F to 120°F [-29°C to 49°C]
Temperature rating (Wellbore Equipment) 0°F to 250°F [-18°C to 121°C]
Minimum Seawater Temperature 35°F [2°C]
API Material Class EE Trim with CRA clad seal surfaces
Rated Working Pressure (Hydraulic Control) 5,000 psi
Maximum Discharge / Vent Rate during Capping
330,000 bpd
Operations
Erosion Rate 14lbs per 1000 barrels of oil
Maximum Gas Oil Ratio (GOR) 684
H2S Content Unlimited
CO2 Content <30 psi
Chloride Concentration 25 wt%
Maximum Chemical Injection Rate 50GPM
Outlets (two) 5-1/8” w/ 2X FAI Gate Valves each outlet
Center Bore 7-1/16” w/ 2X FAI Gate Valves
Analog: Pressure via ROV Gauge
• Industry Standards: Measurements

Wellhead Connector
Digital: PT Local Display + Acoustics
18-3/4” Bore, H4 Profile, 27” Mandrel
• API RP17W Flow Control 5-1/8” Choke Valve each side outlet
Installation Crane Wire, Single point lift
• API 6A Transportation Air, Land (Modular) Sea (Full Assembly)

• API 17D
© 2016 Halliburton. All rights reserved.

You might also like