Scribd
Upload
429 views2 pages

Subsea BOP Stack Operations SI - Vertical Well Kill Sheet PDF

This document is a kill sheet for a vertical well. It provides data on formation strength, drilling fluid properties, well geometry, and pumping requirements to kill a well after a kick. Key details include the surface leak off pressure, maximum allowable drilling fluid density, initial kill fluid density calculation, initial and final circulating pressures, strokes to circulate the entire well system, and a graph of predicted circulating pressure over pump strokes. The goal is to calculate pumping parameters to circulate out the kick safely.

Uploaded by

Well Control
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
429 views2 pages

Subsea BOP Stack Operations SI - Vertical Well Kill Sheet PDF

This document is a kill sheet for a vertical well. It provides data on formation strength, drilling fluid properties, well geometry, and pumping requirements to kill a well after a kick. Key details include the surface leak off pressure, maximum allowable drilling fluid density, initial kill fluid density calculation, initial and final circulating pressures, strokes to circulate the entire well system, and a graph of predicted circulating pressure over pump strokes. The goal is to calculate pumping parameters to circulate out the kick safely.

Uploaded by

Well Control
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DATE :

International Well Control Forum


Subsea BOP Kill Sheet - Vertical Well (S.I. Units) NAME :

FORMATION STRENGTH DATA: CURRENT WELL DATA:


SURFACE LEAK -OFF PRESSURE FROM SUBSEA BOP DATA:
FORMATION STRENGTH TEST (A) kPa MARINE RISER m
(B) LENGTH
DRILLING FLUID DENSITY AT TEST kg/m3
CHOKELINE m
MAX. ALLOWABLE DRILLING FLUID DENSITY = LENGTH
(A) (C)
(B) + = kg/m3 CURRENT DRILLING FLUID:
SHOE T.V. DEPTH x 0.00981
DENSITY kg/m3
INITIAL MAASP =

((C) - Current Density) x 0.00981 x Shoe TVD = kPa CASING SHOE DATA:
SIZE mm

M. DEPTH m
PUMP NO. 1 DISPL. PUMP NO. 2 DISPL. T.V. DEPTH m

m3 / stroke m3 / stroke

HOLE DATA:
(PL) DYNAMIC PRESSURE LOSS [kPa]
SIZE mm
SLOW PUMP PUMP NO. 1 PUMP NO. 2
Riser Choke Friction Riser Choke Friction M. DEPTH m
RATE DATA: Line Choke Line Choke
Line Line T.V. DEPTH m
SPM
SPM

PRE-RECORDED LENGTH CAPACITY VOLUME PUMP STROKES TIME


VOLUME DATA: m m3 / m m3 stks minutes

DRILL PIPE x =
VOLUME PUMP STROKES
HEAVY WALL DRILL PIPE x = +
PUMP DISPLACEMENT SLOW PUMP RATE
DRILL COLLARS x = +

DRILL STRING VOLUME (D) m3 (E) stks min

DC x OPEN HOLE x =

DP / HWDP x OPEN HOLE x = +

OPEN HOLE VOLUME (F) m3 stks min

DP x CASING x = (G) + stks min

CHOKELINE x = (H) + stks min

TOTAL ANNULUS / CHOKELINE VOLUME (F+G+H) = (I) m3 stks min

TOTAL WELL SYSTEM VOLUME (D+I) = (J) m3 stks min

ACTIVE SURFACE VOLUME (K) m3 stks

TOTAL ACTIVE FLUID SYSTEM (J+K) m3 stks


Dr No SSV 03/01
(S.I.- 0.00981)
MARINE RISER x DP x = m3 stks 29-01-2003
DATE :
International Well Control Forum
Subsea BOP Kill Sheet - Vertical Well (S.I. Units) NAME :

KICK DATA :
SIDPP kPa SICP kPa PIT GAIN m3

KILL FLUID DENSITY SIDPP


CURRENT DRILLING FLUID DENSITY +
TVD x 0.00981
................. + = kg/m3
KMD

INITIAL CIRCULATING DYNAMIC PRESSURE LOSS + SIDPP


PRESSURE kPa
................. + ................. =
ICP

KILL FLUID DENSITY


FINAL CIRCULATING x DYNAMIC PRESSURE LOSS
CURRENT DRILLING FLUID DENSITY
PRESSURE
FCP x ................. = kPa

(L) x 100
(L) = ICP - FCP kPa ----------- = kPa/100 strokes
(E)

INITIAL DYNAMIC CASING PRESSURE


AT KILL PUMP RATE SICP - CHOKE LINE FRICTION .......................... - ......................... = kPa

STROKES PRESSURE
[kPa]
STATIC & DYNAMIC DRILL PIPE PRESSURE [kPa]

Dr No SSV 03/02 (S.I.-0.00981) 29-01-2003 STROKES

You might also like