ENGINEERING GRAPHICS

BE 1st SEMESTER (ME/IT/EE/AE)

BE 2nd SEMESTER (EC/CE/ CIVIL)
SUB CODE: CC111
Teaching Scheme (Credits and Hours)
Teaching Scheme Evaluation Scheme
Total
L T P Total Theory IE CIA Pract. Total
Credit
Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks Marks
3 0 4 7 5 3 70 30 20 30 150
LEARNING OBJECTIVES:
The educational objectives of this course are
 To develop in students graphic skills for communication of concepts, ideas and design of engineering
products and expose them to existing national standards related to technical drawings.
 Importance of graphics in engineering applications – Use of drafting instruments – BIS conventions and
specifications – Size, layout and folding of drawing sheets – Lettering and dimensioning.
OUTLINE OF THE COURSE
Minimum No.
Sr.No Unit No.
of Hrs
1 Introduction 3
2 Engineering Curves 8
3 Loci of Points 8
4 Projections of Points & Lines 9
5 Projections of Planes 9
6 Projections of Solids & Section of Solids 8
7 Development of Lateral Surfaces 9*
8 Orthographic Projections 14*
9 Isometric Projections and Isometric View or Drawing 14*
10 Computer Aided Drafting 14*
11 Machine Drawing 9*
* Topics will be covered during Laboratory hours
Total Hours (Theory) : 45, Total Hours (Lab) : 60, Total Hours : 105
DETAILED SYLLABUS

Unit Topics Lectures Weigtage

No (Hours) (%)
1. Introduction: Introduction to Engineering Graphics, Drawing instruments and 3 2
accessories, BIS - SP 46. Use of plane scales and Representative Fraction.
2. Engineering Curves: Classification of Engineering Curves, Construction of Conics, 8 8
Cycloidal Curves, Involutes and Spirals.
3. Loci of Points: Path of the points moving on simple arrangements and simple 8 8
mechanisms, slider crank mechanism, four bar chain mechanism etc.
4. Projections of Points & Lines: Introduction to principal planes of projections, 9 8
Projections of the points located in same quadrant and different quadrants, Projections of
line with its inclination to one reference plane and with two reference planes. True length
of the line and its inclination with the reference planes.
5. Projections of Planes: Concept of different planes, Projections of planes with its 9 8
inclination to one reference plane and with two reference planes. Concept of auxiliary
plane method for projections of the plane.
6. Projections of Solids & Section of Solids: Classification of solids. Projections of solids 8 8
like Cylinder, Cone, Pyramid and Prism with its inclination to one reference plane and
with two reference planes. Section of such solids and the true shape of the section.

7. Development of Lateral Surfaces: Concept of development of the different surfaces. 9 8

Page 1
 Parallel Line Development and Radial Line Development.
8. Orthographic Projections: Principle of projection, Principal planes of projection, 14 14
Projections from the pictorial view of the object on the principal planes for View from
Front, View from Top and View from Side using first angle projection method and third
angle projection method, Full Sectional View.
9. Isometric Projections and Isometric View or Drawing: Isometric Scale, Conversion 14 14
of orthographic views into isometric projection, isometric view or drawing.
10. Computer Aided Drafting: Introduction to various CAD software 14 14
11. Machine Drawing: Representation of Three Dimensional objects – Need for and 9 8
importance of multiple views and their placement – Developing visualization skills
through free hand sketching of multiple views from pictorial views of objects.
Total 105 100
INSTRUCTIONAL METHOD AND PEDAGOGY (Continuous Internal Assessment (CIA) Scheme)
 At the start of course, the course delivery pattern, prerequisite of the subject will be discussed
 Lecture may be conducted with the aid of multi-media projector, black board, OHP etc.
 Attendance is compulsory in lectures, Practicals and Tutorials which carries 05 Marks.
 At regular intervals assignments is given. In all, a student should submit all assignments of 05 marks each.
 Classroom participation and involvement in solving the problems in Tutorial rooms carries 05 Marks.
 Viva Voce will be conducted at the end of the semester of 05 Marks.
 One internal exam of 30 marks is conducted as a part of Mid semester evaluation.
 Experiments shall be performed in the laboratory related to course contents.
 The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being
taught in lectures.
STUDENTS LEARNING OUTCOME:
On successful completion of the course
 Be able to sketch engineering components
 Be able to interpret engineering drawings that comply with drawing standards
 Be able to produce engineering drawings
 Be able to understand the importance of computer aided drafting (CAD) system.
TEXT BOOKS:
 A Text Book of Engineering Graphics By P.J.Shah, S.Chand & Company Ltd., New Delhi
 A Text Book of Machine Drawing By P.J.Shah, S.Chand & Company Ltd., New Delhi
 Elementary Engineering Drawing By N.D.Bhatt, Charotar Publishing House, Anand
 Geometrical and Machine Drawing By N.D.Bhatt, Charotar Publishing House, Anand
 Gujarat Technological University B.E Sem I 10
REFERENCE BOOKS:
 Engineering Graphics – I and II By Arunoday Kumar, Tech – Max Publication, Pune
 Engineering Drawing & Graphics using Auto CAD 2000 By T. Jeyapoovan, Vikas Publishing House Pvt. Ltd., New
Delhi
 A text book of Engineering Drawing By R.K.Dhawan, S.Chand & Company Ltd., New Delhi
 A text book of Engineering Drawing By P.S.Gill, S.K.Kataria & sons, Delhi
 Engineering Drawing with an Introduction to AutoCAD By D.A.Jolhe, Tata McGraw-Hill Publishing Co. Ltd., New
Delhi
 Computer Aided Engineering Drawing, S. Trymbaka Murthy, I.K.International Publishing House Pvt. Ltd., New Delhi
WEB MATERIALS:
 http://www.wikipedia.org
LIST OF DRAWING SHEETS
Sr. No. Title
1 Introduction to Engineering Graphics
2 Engineering Curves
3 Loci of Points
4 Projections of Points & Lines
5 Projections of Planes
6 Projections of Solids & Section of Solids
7 Development of Lateral Surfaces
8 Orthographic Projections
9 Isometric Projections and Isometric View or Drawing
10 Auto CAD drawing on A-4 size paper

Page 2