0% found this document useful (0 votes)
137 views2 pages

DOM Lesson Plan

This document outlines a lesson plan for the academic year 2019-20 covering the topic of Dynamics of Machinery. It is divided into 5 modules, with each module covering 10 lectures. The modules cover topics such as static force analysis, dynamic force analysis, balancing of rotating and reciprocating masses, governors, gyroscopes, undamped and damped free vibrations, and forced vibrations. Each lecture lists the specific topics to be covered on that date.

Uploaded by

vijaykumar327
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
137 views2 pages

DOM Lesson Plan

This document outlines a lesson plan for the academic year 2019-20 covering the topic of Dynamics of Machinery. It is divided into 5 modules, with each module covering 10 lectures. The modules cover topics such as static force analysis, dynamic force analysis, balancing of rotating and reciprocating masses, governors, gyroscopes, undamped and damped free vibrations, and forced vibrations. Each lecture lists the specific topics to be covered on that date.

Uploaded by

vijaykumar327
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Colossally Jeopardy worst

DYNAMICS OF MACHINERY
Lesson plan for academic year 2019-20
Sub Code: 17ME52
SL-NO

Module

Date Topics To be Covered

L1 Static force Analysis: Static equilibrium. Equilibrium of two and three force
1
members.
2 L2 Members with two forces and torque, free body diagrams,
3 L3 Static force analysis of four bar mechanism
4 L4 Slider-crank mechanism with and without friction
5 L5 Dynamic force Analysis: D’Alembert’s principle,
L6 Inertia force, Inertia torque. Dynamic force analysis of four-bar mechanism and
6
Slider crank mechanism without friction, numerical problems.
7 1 L7 numerical problems.
8 L8 numerical problems.
9 L9 numerical problems.
10 L10 numerical problems.
11 L11 Balancing of Rotating Masses: Static and dynamic balancing,
L12 balancing of single rotating mass by balancing masses in same plane and in
12
different planes
13 L13 balancing of single rotating mass by balancing masses in different planes
14 L14 Balancing of Reciprocating Masses: Inertia effect of crank and connecting rod
15 L15 Single cylinder engine,
16 2 L16 balancing in multi cylinder-inline engine (primary and secondary forces)
17 L17 numerical problems.
18 L18 Numerical problems.
19 L19 numerical problems.
20 L20 numerical problems.
21 L21 Governors: Types of governors,
22 L22 force analysis of Porter and Hartnell governors.
23 L23 Controlling force, Stability, Sensitiveness, Isochronisms,
24 L24 Effort and Power. Gyroscope: Vectorial representation of angular motion
25 L25 ,Gyroscopic couple. Effect of gyroscopic couple on plane disc,
26 3 L26 aeroplane, ship,
27 L27 stability of two wheelers and four wheelers, numerical problems.
28 L28 numerical problems.
29 L29 numerical problems.
30 L30 numerical problems.
31 L31 Introduction & Undamped free Vibrations (Single Degree of Freedom)
32 L32 Types of vibrations, Definitions, Simple Harmonic Motion (SHM),
33 L33 Work done by harmonic force, Principle of super position applied to SHM.
34 L34 Methods of analysis – (Newton’s, Energy & Rayleigh’s methods).
35 L35 Derivations for spring mass systems, Natural frequencies of simple systems
36 4 L36 springs in series and parallel, Torsional and transverse vibrations
37 L37 Effect of mass of spring and problems.
38 L38 numerical problems.
39 L39 numerical problems.
40 L40 numerical problems.
41 L33 Damped free Vibrations (Single Degree of Freedom) Types of damping
L42 Analysis with viscous damping - Derivations for over, critical and under
42
damped systems,
L43 Logarithmic decrement and numerical problems. Forced Vibrations (Single
43
Degree of Freedom
44 5 L44 Analysis of forced vibration with constant harmonic excitation
45 L45 Magnification factor (M.F.), Vibration isolation - Transmissibility ratio
46 L46 Excitation of support (absolute and relative),
47 L47 Numerical problems.
48 L48 Numerical problems.
49 L49 Numerical problems.
50 L50 Numerical problems.

Mr.Vijaykumar H K
Assistant professor

You might also like