Qualcomm®

Bluetooth Low Energy Solutions

Qualcomm Extending the range of Bluetooth® wireless

technology by helping to turn Bluetooth-
Bluetooth Mesh enabled devices into a mesh network

Help create a security-focused Solution Highlights

Bluetooth Low Energy-based
network for IoT devices Industrial security features to
Qualcomm Bluetooth mesh is a protocol support a robust network
designed to run over existing Bluetooth
low energy devices, helping to add mesh Qualcomm Bluetooth mesh uses encryption and
networking capability for a security-focused authentication for a security-focused and robust network,
Bluetooth wireless network for the IoT. designed to send data on three channels which coexist
very well with Wi-Fi.
Qualcomm Bluetooth mesh is designed to allow
Bluetooth low energy devices to send and receive
messages, act on received messages, and repeat Helps extend the range of
those messages to nearby devices, helping to
extend the range of Bluetooth wireless technology Bluetooth wireless technology
by turning Bluetooth-enabled devices into a mesh Qualcomm Bluetooth mesh can assist in extending
network for the Internet of Things (IoT). Qualcomm the range by turning Bluetooth-enabled devices into a
Bluetooth mesh supports the Bluetooth Special security-focused mesh network for the IoT.
Interest Group (SIG) mesh networking standard
and is a SIG mesh implementation and evolution
of CSRmesh™. CSRmesh, our Bluetooth mesh Simple and easy to install and use
technology, was introduced to the industry in 2014
and has seen commercial success in a number of No routers or access points to buy, install and configure.
applications globally and we hope that Qualcomm Qualcomm Bluetooth mesh is designed with a simple
Bluetooth mesh will continue the legacy. installation and configuration procedure via Smartphone
for a technology that truly enables low cost consumer
Bluetooth mesh networking supports many-to-many
plug and play.
(m:m) device communications and helps developers
and system integrators create IoT solutions where
tens, hundreds, or thousands of devices need to
securely communicate with one another.
Scalable, industrial grade solution
Qualcomm Bluetooth mesh supports scalability for very
Qualcomm Bluetooth mesh helps customers
to develop standards-based solutions that are large networks, up to 32,000 nodes, and helps to bring
compatible with Bluetooth SIG mesh networking Bluetooth technology to the creation of industrial-grade
specifications, supporting devices in communicating device networks with multicast support for groups, ideal
with each other in a mesh network. for lighting.

Qualcomm Bluetooth mesh is a product of Qualcomm Technologies, Inc. This material is subject to change without notice.
CSRmesh is a product of Qualcomm Technologies International, Ltd. 87-CE928-1 Rev. A
Bluetooth Mesh Applications

BEACON

Asset Tracking Industrial Lighting Wireless Sensor Networks Smart Buildings Mesh Lighting Beacon Management

Features Qualcomm Bluetooth Mesh Capabilities

Designed to ensure that all levels of the
£ Messages are sent to individual
technology are comprehensively specified devices; groups; or all devices…
with an extensive stack solution that helps
define the low-level radio up to the high-
For example:
level application layer “Switch-on living room lights”
Reliability: Supports inherently self-healing
£ “Lower thermostat”
networks with no single points of failure “Switch-off all devices”
£
High capacity for scalability of industrial
grade solutions:
– Up to 32,000 nodes
– Up to 127 hops per message
– High speed radio
– Small packet size
£ Designed to provide industrial-grade

security features for protection against

known attacks
Multicast support for groups, ideal for
£

lighting Multiple controllers supported:

Designed to directly control, configure and
£ • Android and iOS devices,
interact with many Bluetooth low energy smart home hubs and
devices from a mobile device smart wearables
Supports a wide variety of control and
£ • Cloud connected devices
automation applications, retail advertising,
commercial and industrial opportunities,
and new IoT use cases like lighting, indoor The underlying principles of CSRmesh and Qualcomm Bluetooth mesh
positioning and asset tracking.
are the same, although there are changes in the Protocol stack and
packet structure. The table below helps to highlight the differences.
Related Products
QCA4020 Tri-mode Connectivity SoC
QCA4024 Dual-mode Connectivity SoC CSRmesh Qualcomm Bluetooth mesh
CSR102x Bluetooth Low Energy SoCs Mesh Type • Flood • Flood
CSR102x Starter Development Kit
Managed Flood • Time-to-Live • Time-to-Live
CSR102x IoT Development Kit Features • Message cache • Message cache
CSR102x Professional Development Kit • Optional Relay Function • Optional Relay Function
CSR102x Bluetooth Node Development Kit • Proxy Function • Friend Function
QCA4020 and QCA4024 are products of Qualcomm Technologies, Inc.
CSR102x, Starter Development Kit, IoT Development Kit, Bluetooth Node
ECDH-based • P-190 elliptic curve • P-256 elliptic curve
Development Kit, and Professional Development Kit are products of Qualcomm Provisioning
Technologies International, Ltd.
Security Features • Network Key • Network Key
• Application Key
To learn more visit: Encryption • AES • AES
qualcomm.com or Qualcomm SoCs • CSR101x • QCA402x
developer.qualcomm.com • CSR102x • CSR102x

©2017 Qualcomm Technologies, Inc. All Rights Reserved. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. CSRmesh is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and
other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Qualcomm Technologies, Inc. is under license. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Other product and brand names may
be trademarks or registered trademarks of their respective owners.. 1117A