Slope Monitoring movement

The following were downloaded from various websites and could be of help to industry especially for those
appearing for exams

Slope Failure in opencast mines will result in loss of men, machine or both. It takes quite sometime to return
normalcy, to remove material that has collapsed, reform benches etc., Geotechnical teams are employed to assess
the safe pit slope .Slope monitoring equipments that provide data. Slope monitoring includes monitoring the surface
and subsurface movement in the underlying rock strata and the relationship of this to the known geological
structure.

The selection of equipment for slope monitoring will depend on a number of factors, including the perceived or
known geotechnical risk and the feasibility of the equipment. Mines with geotechnical risks need multiple types of
monitoring equipment as no single technique can provide all the information necessary. Using of multiple types of
monitoring equipment is based on the needs of a mine at any given time; for example, very shallow mine walls may
only require simple, long-term measurements of movement, whereas with steep walls the risk of failure is much
higher. Production plans have an impact on the level of information required regarding slope stability - active
production areas that are in the vicinity of mine slopes where stability problems exist will require close monitoring.
Warning of impending failure can prevent injury, and also equipment damage.

Monitoring methods used on the surface fall into three main categories: radar and laser systems; prism-based; and
visual survey and extensometers.

Radar is now widely used by the majority of open-pit mines. The main advantages of radar systems are that they
can penetrate dust and fog while optical devices cannot. This consist of a dish that scans horizontally and vertically,
usually mounted on a mobile trailer. There are two basic types of slope monitoring radar commercially available:
real-beam radar such as Ground Probe's Slope Stability Radar (SSR) and synthetic aperture radar, such as IDS
Australasia's IBIS-M, both of which have advantages and disadvantages, depending on the requirements of each
mine. These similar in measuring of displacement, but differ in the way in which they locate and map the
displacements.

A real-beam, slope-monitoring radar offers a more precise instrument for monitoring rock wall movements that is
necessary. It provides full coverage of the slope, and independent measurements in horizontal and vertical
dimensions, near real-time measurements, sub-millimetre accuracy and it can detect rapidly developing failures.
However, it is heavy to move around and may be affected by atmospheric changes. Synthetic aperture radar gives
scope for high azimuthal resolution at long range, but vertical resolution depends on converting range information
into elevation using a digital terrain model. It gives full coverage, but only in its deployment area, and offers near
real-time measurement and sub millimetre accuracy. However, it requires a fixed installation and is not mobile.

The range includes: the MSR 200, which can detect slope failures at an operational range of 1,200m; and the MSR
300, with an operational range of 2,500m.They generate their own electrical power. The newest member of the
MSR family is the MSR 060 V, which is a fully fledged MSR system, mounted on a standard pick-up vehicle and
capable of operating at distances of up to 600m. MSR systems are used altitudes from sea level to 4,800m
elevation.& temperatures ranging from -30°C to +55°C

1
Ground Probe . This system remotely measures the movement of wall surfaces, and uses visual images to confirm
and display the results. The dual-measurement system enables geotechnical engineers and mine personnel to track
slope movements confidently, and set alarms to improve safety and optimize productivity.

The Work Area Monitor (WAM), launched in 2011, was developed for operation by a mine production crew with no
specific technical skills. The system comprises sensitive, fast-scanning radar, coupled with a high-resolution
camera, all built into a mine-standard, light vehicle. The primary function of the WAM is to sound a local area
alarm to warn workers of slope movement in their vicinity, as opposed to the broader pit-monitoring and long-term
deformation measurements of the known slope-stability radars.

Ground Probe also offers Geo Seer, a software application that provides secure local and remote access to
geotechnical information from the SSR.

IDS Australasia IDS manufacture two products for slope stability monitoring: IBIS-L, which was designed
specifically for landslide monitoring; and IBIS-M, which is used for monitoring walls in open-pit mines.

IBIS-L uses microwave interferometer to offer real-time, 2D mapping of simultaneous displacements over large
areas, with an accuracy of up to 1/10mm. It operates autonomously, samples movements every five minutes, and is
suitable for use by day or night in any weather.

IBIS-M is based on small, horn antennas that are moved along a linear scanner, making the product more flexible
than parabolic dish antennas, which have to be moved mechanically. IDS say this allows it to achieve higher
performance in terms of accuracy, resolution, scan time, reliability, capital and operational costs.

LASER: Laser scanning is a remote sensing technique that involves sweeping a narrow laser-beam pulse along a
direction characterized by lateral and vertical angles relative to the scanned slope. The method gives accurate
discontinuity measurements by generating. a 'point cloud' or 3D representation of each reflecting point of the target
slope.

Laser scanners are ideal for capturing baseline data and for visualizing changes in surfaces. Apart from the obvious
benefit of being able to capture accurate survey data from a safe distance, laser scanning creates an immediate
record of structures such as undercuts

Laser-based techniques are popular for larger mines as they do not have the same distance limitations of other
techniques such as radar. Modelling and analysis software enables to interpret the data.

Some advantages of laser surveying include full coverage of the target area, near real-time results and no need to
physically access the slope.

Disadvantages include less accuracy than other methods, a fixed installation and the fact that systems need to be
protected from environmental conditions.

Site Monitor Slopes

Site Monitor is a state-of-the-art laser measurement-based system to measure and monitor the stability of rock faces and
landslips. It has been developed in partnership with mining surveyors to provide a simple-to-use, reliable solution that has the
flexibility and performance to function in a wide range of monitoring applications. Using non-contact laser hardware, Site

2
 Monitor will make range measurements on a pre-defined grid at a selected interval. The software suite incorporates an
Analysis module for displaying and analysing time-series monitoring data.

Key advantages
 No requirement for prisms to be placed in the survey area
 Rapid monitoring of thousands of points rather than single prism locations
 Complete coverage of visible surface
 Portable system can be moved into areas of limited access
 Up to 6km measurement range
 Competitive cost
 Data can be taken into Volumes module

COMPANIES 3D Laser Mapping 3D Laser Mapping provides Site Monitor Slopes; a monitoring system that uses
advanced laser-scanning technology with powerful, simple-to-use software. Site Monitor is a flexible, modular
system that can be tailored to suit clients' needs.

The data generated by Site Monitor Slopes is high resolution and takes advantage of waveform analysis. This is a
complex feature, but in essence provides the facility to 'see more'; for example, through vegetation or protective
wire meshes.

Maptek Maptek's I-Site laser-scanning technology collects and models detailed survey data. Maptek makes the I-
Site 8800 and 8400 scanners. Cut and fill volumes can be calculated, and the model can be used to model slope
stability over time. I-Site point data can also be imported into hydro-dynamic models and used to estimate shear
stresses on slopes."

PRISM·BASED SYSTEMS: Automatic prism-monitoring systems using motorized total stations have been used
in mines since the early 1990s. Prisms are mounted on each of the points to be monitored, together with one or
more stable reference points, with their observation controlled by a software application. The total station measures
horizontal and vertical angles and slope distances to each prism, from which easting, northing and height values
and, subsequently, displacements are computed.

"Usually, the total stations are installed at a permanent location and levelled to align their main axis with the
direction of local gravity. Attention is paid to select only very stable sites to ensure the co-ordinates computed from
the station will remain in a consistent reference frame to simplify the detection of movement in the monitoring
points.

"In mines, the total stations are usually placed at the top of the pit. At least one stable point is needed to orientate
the total station, and account for rotations due to uneven heating and cooling of the monument and instrument. If
the instrument cannot be located on a stable pillar then a free-station calculation, using measurements to multiple
stable control points, can be used to account for movements of the total station."

Total stations are often referred to as robotic because once the station and prisms are installed in the mine no
manual input is needed as the instrument movements are managed by software.

Advantages of prism-based systems include sub-millimeter accuracy, measurement in real-time, the ability to
measure long-term deformation changes, 3D co-ordinates and a long measurement range. Compared with radar, the
initial cost is low. However, it is restricted to localized measurement only, requires a fixed installation and can be
affected by atmospheric changes.
3
Technological advances in total stations include faster speeds and the ability to find and lock on to targets over long
distances. Improvements in communications technology, such as wireless mesh radio networks, also allow remote
placement and control of total stations and global navigation satellite systems (GNSS) receivers.