Scribd
Upload
44 views

TX Basic Programs: Program No. Data Description

This document describes various phone system programming codes and their purposes. Program 02 deals with line grouping, program 04 covers station assignment settings like executive override and headset use, and program 08 sets parameters for different phone types like key touch tone and do not disturb functions. Other programs configure system-wide settings such as automatic line access, exclusive hold, and class of service restrictions.

Uploaded by

Future Enterprise
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
44 views

TX Basic Programs: Program No. Data Description

This document describes various phone system programming codes and their purposes. Program 02 deals with line grouping, program 04 covers station assignment settings like executive override and headset use, and program 08 sets parameters for different phone types like key touch tone and do not disturb functions. Other programs configure system-wide settings such as automatic line access, exclusive hold, and class of service restrictions.

Uploaded by

Future Enterprise
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

TX BASIC PROGRAMS

PROGRAM NO. DATA DESCRIPTION

01# 10100 LINE ASSIGNMENT.

02# LINE GROUPING

04# 01100 STATION ASSIGNMENT


a. Executive Override
0: not allowed, 1:allowed with tone,
2: allowed without tone.
b. CO. Off hook signaling,
0: disable, 1: enable.
c. ICM off hook signaling
0: none, 1:when dial, 2:when busy
d. ICM signal call
0:disable, 1:enable
e. Headset
0:disable, 1:enable.

05# UNSUPERVISED CONFERENCE PORT.

06# OUTGOING CALLS.


07# INCOMING CALLS.

08# KTS 00110 STATION ASSINGMENT


TONE SLT. 30110 a. Inst. Type.
PULSE SLT. 20110 0:KTS, 1:DISA, 2:SLT, 3:SLT (DTMF).
b. SLT dial plan type
0: dial plan 1, 1:dial plan 2.
c. Internal page zone.
0:not include 1-4:page zone 1-4.
d. Tenant group
0:not include 1-4:tenant group 1-4.
e. Park hold group
0:not include, 1-4:park hold group1-4.

13# 03001 STATION ASSIGNMENT


a. key touch tone
0:provided, 1:not provided
b. DND
0:not provided, 1:incoming tone disable
provided, 2:DND provided, 3:dnd and incoming
tone disable provided.
c. Alarm audible.
0:off, 1:on
d. Voice announce device port
0:disable, 1:enable.
e. Terminal connection (for SLT)
1: connection.

14# LOGICAL PHYSICAL

15# 00311 SYST ASSIGNMENT


a. Lamp shift mode.
0:disable, 1:enable
b. Night transfer
0:all tenant, 1:each tenant
c. Automatic line access.
0:disable, 1:press SPK key and queuing group
no., 2:on-hook condition dial 0,
3:1+2.
d. Exclusive hold: 0:disable, 1:enable.
e. Single step access 0:disable, 1:enable.
16# 21101 SYST ASSIGNMENT
a. ringing line off hook access
0:disable, 1:all call at incoming gp1 and ringing
call at gp2, 2: ringing call at incoming gp1 &
gp2.
b. Recall line off-hook access.
0:disable, 1:enable
c. Co line access for SLT.
0:seize the co line for outgoing call
1:seize the co line for outgoing call & held line
pick up.
d. Add-on conference setup mode
0:increase one by one, 1:increase 5 parties at
once.
e. Multi line conference.
0:disable, 1:enable

19# 11010 SYST ASSIGNMENT


a. All call to external zone
0: disable, 1: speaker 1, 2: speaker 2,
3: speaker 1&2.
b. Intercom call type
0:voice call, 1:signal call.
c. MIC on /off
0:on, 1:off
d. Room monitor
0:disable, 1:enable
e. Not used.

26# 1-025 FLASH TIME

35# 005 CLASS OF SERVICE


a. Class day –0 or 2
b. Class nit, 0- 2
c. Dial block class – 2 or 5.

41# 01- 0 CLASS C DATA.


N: Restricted code no. (1-8)
DD: Restrict code.(from digits 1 to 2 digits set
allowed). When you want to clear a data press OPAC
key.

20# 01000 SYSTEM ASSIGNMENT


a. Door chime.
b. Pager Splash.
c. Door Alert.
d. Auto access of CO by dialing 0 / 9.
e. Existence of door phone box.

You might also like