Modeling: UPT - XU - 1000 - STD - 01 Type Input Coupling

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Modeling

UPT — XU — 1000 — STD — 01


Type

UPT - Universal Pulse Transmitter Input Coupling5

00 - S1 (E3 Through H8, E3-S3, S5)7


Housing 01 - S3 and S5 (C2, F4 Through H8)7
02 - S6 and S7 (C2 Through M16)
XU - Explosion-Proof, UL/CUL, ATEX and 03 - S1, S3, and S5 (JA/JB10, K12, and M16)
IECEx 04 - C2-S1 and SC-13 Gallons
05 - C2-S1 and SC-13 Dekalitres
06 - SD Meters and T-40 Gallons
High-Frequency Pulse Resolution4 07 - SD Meters and T-40 Dekalitres
1000 - 1,000 Pulses
Trim Package
500 - 500 Pulses
250 - 250 Pulses STD - Standard
200 - 200 Pulses
100 - 100 Pulses

Table 1
Transmitter Models / Available Pulses per Volume Unit6
Meter Gearing UPT-1000 UPT-500 UPT-250 UPT-200 UPT-100
1:1 Gallons 1,000 pulses/gal 500 pulses/gal 250 pulses/gal 200 pulses/gal 100 pulses/gal
5:1 Gallons1 200 pulses/gal 100 pulses/gal 50 pulses/gal 40 pulses/gal 20 pulses/gal
1:1 Barrels 1,000 pulses/bbl 500 pulses/bbl 250 pulses/bbl 200 pulses/bbl 100 pulses/bbl
1:1 Dekalitres 1,000 pulses/dek 500 pulses/dek 250 pulses/dek 200 pulses/dek 100 pulses/dek
5:1 Dekalitres 200 pulses/dek 100 pulses/dek 50 pulses/dek N/A N/A
10:1 Dekalitres 100 pulses/dek 50 pulses/dek N/A N/A N/A

1 U.S. Gallons unless specified Imperial Gallons.


4 Pulses per revolution of input shaft.
5 This coupling mates with output of meters listed.
6 Nominal pulses per volume are based on meter with 100% gearing.
7 The 00 coupling is required for F4-S1 models pre-2008 (see parts list). The 01 coupling is required for F4-S1 models 2008-present.

Bulletin SS01105 Issue/Rev. 0.8 (1/18) 3

You might also like