Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    Standard Installation Layout For Copper Tube: 1" Full Port Ball Valve 1 " SWT X 1" Fip Bushing Hot Tap Adapter

    Uploaded by

    cesarinti
    The standard installation layout for copper tube involves brazing a 11⁄2" outlet copper tee into a drained section of pipe before filling it. A 1" full port ball valve and hot tap adapter are then installed in the tee, with an o-ring seal and position clamping nut to allow removal and reinsertion of the flow meter without shutting down the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Standard Installation Layout For Copper Tube: 1" Full Port Ball Valve 1 " SWT X 1" Fip Bushing Hot Tap Adapter

    Uploaded by

    cesarinti
    15 views1 page
    The standard installation layout for copper tube involves brazing a 11⁄2" outlet copper tee into a drained section of pipe before filling it. A 1" full port ball valve and hot tap adapter are then installed in the tee, with an o-ring seal and position clamping nut to allow removal and reinsertion of the flow meter without shutting down the system.

    Original Description:

    STANDARD INSTALLATION LAYOUT FOR COPPER TUBE

    Original Title

    COP_INST

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The standard installation layout for copper tube involves brazing a 11⁄2" outlet copper tee into a drained section of pipe before filling it. A 1" full port ball valve and hot tap adapter are then installed in the tee, with an o-ring seal and position clamping nut to allow removal and reinsertion of the flow meter without shutting down the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views1 page

    Standard Installation Layout For Copper Tube: 1" Full Port Ball Valve 1 " SWT X 1" Fip Bushing Hot Tap Adapter

    Uploaded by

    cesarinti
    The standard installation layout for copper tube involves brazing a 11⁄2" outlet copper tee into a drained section of pipe before filling it. A 1" full port ball valve and hot tap adapter are then installed in the tee, with an o-ring seal and position clamping nut to allow removal and reinsertion of the flow meter without shutting down the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    STANDARD INSTALLATION LAYOUT FOR COPPER TUBE

    The Standard Installation option allows for removal and re-insertion of the
    flow meter without system shutdown. For the initial installation, the 11⁄2"
    outlet copper tee must be brazed into a drained section of pipe and the
    valve installed prior to filling the section.

    1" FULL PORT


    11⁄2" SWT x 1" BALL VALVE
    FIP BUSHING

    1" CLOSE HOT TAP ADAPTER


    NIPPLE

    FLOW DIRECTION
    "O" RING SEAL

    POSITION CLAMPING NUT


    11⁄2" OUTLET *** CAUTION ***
    COPPER TEE This sheet is for general information only. Please refer to
    the installation manual for details before installing. The
    manual contains specific dimensions and safety data.

    JCI ITEM # DESCRIPTION


    F-STD-INSTL3 Install kit, standard, 1"-2" copper tube
    F-STD-INSTL4 Install kit, standard, 2.5-3" copper tube
    F-STD-INSTL9 Install kit, standard, 4" copper tube

    Cop_instl/JCI 2161 Logan St., Clearwater,Florida 33765 Tel (727) 447-6140 Fax (727) 442-5699 8-14-98

    You might also like