Scribd
Upload
44 views1 page

01 Assign Class To Extension (Out Going Call) 02 Group Programing

By connecting an SLT or KTS telephone to telephone numbers 200 or 202, the user can access the system programming mode. This allows the user to assign extension numbers to call classes for outgoing calls, program hunt groups with options for type and staircasing, and flexibly reassign extension numbers.

Uploaded by

JEETENDRA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
44 views1 page

01 Assign Class To Extension (Out Going Call) 02 Group Programing

By connecting an SLT or KTS telephone to telephone numbers 200 or 202, the user can access the system programming mode. This allows the user to assign extension numbers to call classes for outgoing calls, program hunt groups with options for type and staircasing, and flexibly reassign extension numbers.

Uploaded by

JEETENDRA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Programing through Telephone

By default telephone number 200 and 202 has been enable for system programing mode. The user may connect an SLT or a KTS

01 Assign Class to #69 + PASS + 002 + EXTENSION NUMBER + SET ASSCLS <EXT NO><CLASS NO 1
Extension (Out CLASS NUMBER - 32>
Going Call)
02 Group #69 + PASS + 064 + GROUP NUMBER (0-15) +  GROUP NUMBER – 1 – 15
Programing TYPE (1-3) + STAIR CASE (1/2) + *+ EXT  TYPE – 1-SIM, 2 – BUSY IMM ,
NUMBER 01 + * + EXT NUMBER 02 + * 3 – BUSY DLY
 STAIR CASE – 1 (ON) / 2 OFF)
03 Flexible Number #69 + PASS + 033 + OLD EXTENSION
Programing NUMBER * + NEW EXTENSION NUMBER *
(FNP) Assigning
New Numbers

You might also like