PC

850
PC850-8R1 HORSEPOWER
Gross: 370 kW 496 HP / 1800 min-1
Net: 363 kW 487 HP / 1800 min-1
OPERATING WEIGHT
78600 – 79800 kg
BUCKET CAPACITY
3.40 – 4.30 m3

Photos may include optional equipment.

WALK-AROUND

Photos may include optional equipment.

2
 HYDR AULIC EXCAVATOR PC850-8R1

PRODUCTIVITY, ECOLOGY & ECONOMY RELIABILITY & DURABILITY

High Power Komatsu SAA6D140E-5 Engine Boom Foot Hoses
Economy Mode Four-level Setting O-ring Face Seals
Low Ambient Noise Removed Water and Contamination in
Fuel
Working Mode Selection
High-pressure In-line Filtration
Heavy Lift Mode
Highly Reliable Electronic Devices
Swing Priority Mode
KMAX Bucket Teeth
Large Digging Force
High Work Equipment Speed
COMFORT & SAFETY
Large Drawbar Pull and Steering Force
Large Comfortable Cab
Two-mode Setting for Boom
OPG Top Guard Level 2 (ISO 10262)
Shockless Boom Control
Rear View Monitor System (Optional)
* Information and Communication Technology

ICT* & KOMTRAX

Large Liquid Crystal Display (LCD)
Monitor
Equipment Management Monitoring
System
KOMTRAX

MAINTENANCE
Easy Checking and Maintenance of Engine
Easy Cleaning of Cooling Unit
Large Handrail, Step and Catwalk

PC850-8R1
HORSEPOWER Gross: 370 kW 496 HP / 1800 min-1
Net: 363 kW 487 HP / 1800 min-1
OPERATING WEIGHT 78600 – 79800 kg
BUCKET CAPACITY 3.40 – 4.30 m3

3
PRODUCTIVITY, ECOLOGY & ECONOMY

TOTAL VEHICLE CONTROL

Komatsu Technology

Komatsu develops and produces all LCD color monitor

major components, such as engines,
electronics and hydraulic components,
in house. With this “Komatsu Technol-
Hydraulic system controller
ogy,” and adding customer feedback,
Komatsu is achieving great advance-
ments in technology. To achieve both
high levels of productivity and eco-
Hydraulic control valve
nomical performance, Komatsu has
developed the main components with a
total control system. The result is a new Main pump
generation of high performance and
environment friendly excavators.
Pump for fan

Electronically controlled
variable speed fan

Engine
Electronic control unit Heavy duty High Pressure
for engine Common Rail (HPCR) system

Lower and Economical Fuel Consumption Using

High Power Komatsu SAA6D140E-5 Engine
Economy Mode
Powerful turbocharged and air-to-air aftercooled Komatsu Enables operator to set the
SAA6D140E-5 engine provides 363 kW 487 HP. This Kom- Economy mode to four levels
atsu SAA6D140E-5 engine is U.S. EPA Tier 2 and EU Stage according to working conditions
2 emissions equivalent. This Komatsu SAA6D140E-5 engine so that production requirement
actualizes high-power is achieved at the lowest fuel
to low fuel consump- consumption.
tion with the opti-
mum fuel injection by
electronic heavy duty Low Ambient Noise
High Pressure Com-
mon Rail (HPCR) fuel Reduced noise by adoption of an electronically controlled vari-
injection system. able speed fan drive, large hybrid fan and low-noise muffler.

Electronically Controlled Variable Speed Fan ECO Gauge that Assists

Contributes to Low Fuel Consumption and Low Noise Energy-saving Operations
The electronic control system sets the revolution speed of the ECO gauge is equipped for en-
cooling fan according to the coolant, hydraulic oil, and ambi- vironment friendly energy-saving
ent temperature; effectively uses the engine output to prevent operations. Operation in the green
wasteful fuel consumption; and reduces noise during low- range allows reduction of CO2
speed fan revolution. emission and fuel consumption. ECO gauge

4
 HYDR AULIC EXCAVATOR PC850-8R1

Idling Caution Large Digging Force

To prevent unnecessary fuel With the one-touch Power Max. function digging force is
consumption, an idling caution further increased. (Approx. 8.5 seconds of operation)
is displayed on the monitor if the Maximum arm crowd force (ISO 6015):
engine idles for 5 minutes or more.
298 kN (30.4 t) 327 kN (33.3 t) 9.4 % UP
(With Power Max.)
Maximum bucket digging force (ISO 6015):
Auto Deceleration and Auto Idling System 363 kN (37.0 t) 397 kN (40.5 t) 9.4 % UP
(With Power Max.)
Auto deceleration system is equipped to reduce fuel con- Measured with Power Max. function, 3600 mm arm and ISO 6015 rating.
sumption and operating noise. Also, engine idling speed can
be reduced on the monitor with the auto idling system.
Work Equipment Speed

Working Modes Selectable An arm quick return circuit is provided for arm dumping. This
returns a portion of oil flow directly to the hydraulic tank at
P and E modes established work modes are further improved. arm dumping to reduce the hydrau-
P mode – Power or work priority mode has low fuel con- lic pressure loss. Speedier loading
sumption, but fast equipment speed and maximum produc- work can be accomplished by work
tion and power are maintained. equipment with quicker movement.
E mode – Economy or fuel saving mode further reduces fuel
consumption, but maintains the P-mode-like working equip-
ment speed for light duty work. Large Drawbar Pull and Steering Force
Work priority
P P mode Since the machine has a large drawbar pull and a high steer-
Fuel priority ing force, it demonstrates excellent mobility even when it is
E E mode
on inclined sites.
Swing priority mode
Heavy lift mode

Two-mode Setting for Boom

You can select Power or Economy modes using a one-touch
Smooth mode provides easy operation for gathering blasted
button on the monitor panel depending on the workload.
rock and scraping operations. When maximum digging force is
needed, switch to power mode for more effective excavating.

 
Heavy Lift Mode  Power
mode


Gives 10% more lifting force when needed for handling rock
or heavy lifting applications.

Swing Priority Mode Shockless Boom Control

The swing priority mode allows the operator to use the same The PC850-8R1 boom circuit features a shockless valve
easy motion for 180˚ loading as 90˚ loading operations. By (Double-check slow return valve) to automatically reduces the
altering the oil flow, this setting allows you to select either amount of vibration present when operating the boom. Oper-
boom or Selection Result ator fatigue is reduced (Which
swing as the Oil flow to the swing motor is increased.
can improve safety and pro-
ON  
priority for 180˚ loading operations are most efficient. ductivity), and spillage caused  


increased OFF
Oil flow to the boom is increased. by vibration is minimized.
90˚ loading operations are most efficient.
production.

5
RELIABILITY & DURABILITY

High-pressure In-line
Boom Foot Hoses Sturdy Undercarriage
Filtration
The boom foot hoses are arranged The PC850-8R1 has the most extensive The undercarriage is strengthened to
under the boom foot to reduce hose filtration system available, providing in- provide excellent reliability and durabil-
bend during line filters as standard equipment. An ity when working on rocky ground or
operation, in-line filter in the outlet port of each blasted rock.
extending main hydraulic pump reduces failures
hose life and caused by contamination.
improving
operator
safety.

Rock protectors
Frame Structure
Sturdy guards shield the travel mo-
The revolving frame mount and center tors and piping against damage from
frame mount on the swing circle are rocks.
Metal Guard Rings
no welding structure so that force is
transmitted directly to the thick plate of
Metal guard rings protect all the hy-
the frame without passing through any
draulic cylinders and improve reliability.
welding.
Metal guard ring
(Cast iron ring)

O-ring Face Seal

The hydraulic hose seal method has Full length track roller guard
Piston ring
been changed from a conventional
taper seal to an O-ring seal. This pro- Wear ring
vides improved sealing performance Sealed Connectors
during operation.
Sealed connectors seal tight and have
Heat-resistant Wiring
higher reliability.
Fuel Pre-filter
(With Water Separator) Heat-resistant wiring is utilized for the
engine electric circuit and other major
Removes water
component circuit.
and contaminants
from fuel to en-
hance the fuel
Water Separator
system reliability.

Removes water from the fuel and im- Circuit Breaker

proves the reliability of fuel systems.
With circuit breaker, the machine can
High Efficiency Fuel Filter be easily restarted after repair.

Fuel system reli-

ability is even
better with high
efficiency fuel filter.

6
 HYDR AULIC EXCAVATOR PC850-8R1

Strengthened Quarry Bucket Provides Outstanding Wear-resistance

The PC850-8R1 has the bucket for specific use in quarry, this is strong in impact and wear, and providing high performance and
long life. Komatsu KVX’s hard materials* provide excellent wear resistance. Combined with adoption of long-life KMAX teeth, dura-
bility of bucket is drastically enhanced. QUARRY BUCKET WITH KMAX TOOTH
* Komatsu KVX’s hard materials:
Komatsu KVX developed, wear-resistant, rein-
forced materials. Brinell hardness: 500 or more (180 Shroud: Enlarged
kg/mm2 class). Features high wear-resistance and
High-tensile High-tensile
little quality change from the heat generated during strength steel strength steel
rock loading, maintaining long term hardness.
High-tensile
strength steel

KMAX Tooth

• Unique bucket tooth shape for supe-

rior digging performance
• Long-term high sharpness Komatsu KVX’s
hard materials
• Great penetration performance
• Hammerless, safe, and easy tooth re-
High-tensile High-tensile
placement (Tooth replacement time: strength steel strength steel

Half of the conventional machine.)

STEP 1

Photo may include optional equipment.

Observ-
ing proper
safety proce-
dures, place tooth
onto adapter (As shown).

STEP 2

Insert
fastener,
making sure it
is in the unlocked
position (As shown).

STEP 3

Pin locking shaft

Using the correct size socket, rotate

the pin locking shaft 90˚ clockwise (As
shown) to finish the installation.

STEP 4

Pin locking shaft

To remove fastener, use the correct

size socket to rotate the pin lock-
ing shaft 90˚ counter-clockwise (As
shown). Remove fastener and tooth.
Repeat steps 1-3 for a new installation.

7
COMFORT

Wide Newly-designed Cab

Newly-designed wide spacious cab includes seat with reclin-

ing backrest. The seat height and longitudinal inclination are
easily adjusted using a pull-up lever. You can set the appro-
priate operational position of the armrest and the console.
The reclining seat further enables you to place it into the fully
flat state with the headrest attached.

Photo may include optional equipment

Low Noise Design Cab

The newly-designed cab is highly rigid and has excellent

sound absorption. Improvements in noise source reduction Seat with headrest reclined full flat
combined with the use of a low noise engine, hydraulic equip-
ment, and optional air conditioner allows the operator to work
in quiet operating Operator ear's noise Pressurized Cab
condition.
2 dB(A) reduced Optional air conditioner, air filter and a higher internal air pres-
Compared with the current model sure minimize external dust from entering the cab.

8
 HYDR AULIC EXCAVATOR PC850-8R1

Low Vibration with Cab Automatic Air Conditioner

Multi-position Controls
Damper Mounting (A/C) (Optional)
The multi-position, Pressure Propor- PC850-8R1 uses viscous damper Enables you
tional Control (PPC) levers allow the mounts for the cab that incorporates to easily and
operator to work in comfort while main- longer stroke and the addition of a precisely set
taining precise control. A double-slide spring. The cab damper mounting cab atmos-
mechanism allows the seat and control combined with high rigidity deck aids phere with the
levers to move together or indepen- vibration reduction at the operator’s instru-ments
dently, allowing the operator to position seat. on the large LCD. The automatic air
the controls for maximum productivity conditioner uses a bi-level control func-
and comfort. Rubber tion that keeps the operator’s head and
Spring feet cool and warm respectively. This
improved air flow function keeps the
Silcon
Oil inside of the cab comfortable through-
out the year.
Defroster
function
keeps the
front glass
Seat sliding amount: 340 mm clear.

Cab Equipments

Cab Frame Mounted Bottle Holder and

Skylight Sliding Window and Large Side Mirror Defroster Wiper Magazine Rack

SAFETY
Step Light with Horn Interconnected with Rear View Monitor System
Timer Warning Light (Optional) (Optional)
Provides light for Gives visual and audible notice of the The operator can view the rear of the
about one minute to excavator’s machine with a color monitor screen.
allow the operator to operation
get off the machine when acti-
safely. vated.

Pump/Engine
Room Partition
Prevents oil from Thermal and Fan Guards Slip-resistant Plates
spraying on the
engine if a hydraulic Are placed around high-temperature Spiked plates on working areas provide
hose should burst. parts of the engine and fan drive. slip-resistant performance.

9
ICT

LARGE LCD COLOR MONITOR Large Multi-lingual LCD

Monitor
A large user-friendly color monitor en-
1 2 3
ables safe, accurate and smooth work.
Improved screen visibility is achieved
7 by the use of LCD that can easily be
read at various angles and lighting con-
ditions. The switches are simple and
6 easy to operate. Function keys facilitate
4 5 multi-function operations. Displays data
in 12 languages to support operators
around the world.
8

1 2 3
Function
Basic switches
4 5 6
operation Indicators
switches 1 Auto-decelerator 5 Hydraulic oil temperature gauge
2 Working mode 6 Fuel gauge
3 Travel speed 7 ECO gauge
4 Engine water 8 Function switches menu
temperature gauge
A/C operation
switches
Basic operation switches
1 Auto-decelerator (& auto idling) 4 Buzzer cancel
2 Working mode selector 5 Wiper
3 Traveling selector 6 Windshield washer

Mode Selection Equipment Management Monitoring System

The multi-function color monitor has Power mode and Econ- Monitor function
omy mode (Four levels). Controller monitors engine oil
Working Mode Application Advantage level, coolant temperature,
battery charge and air clog-
P • Maximum production/power
Power mode ging, etc. If controller finds any
(P0,P1) • Fast cycle time

E • Good cycle time

abnormality, it is displayed on
Economy mode
(E0,E1,E2,E3) • Good fuel economy the LCD.

Additionally, it is possible to select “Heavy lift mode” or “Swing Maintenance function

priority mode” for each Power mode and Economy mode. Monitor informs replacement
Selection Display on the monitor time for oil and filters when
the replacement interval is
Heavy Lift Mode reached.

Swing Priority Mode Trouble data memory function

Monitor stores abnormalities for effective troubleshooting.

10
 HYDR AULIC EXCAVATOR PC850-8R1
KOMTRAX

Equipment Management Support

Through the web application, a variety of search parameters

The Komatsu remote monitoring and are available to quickly find information about specific ma-
management technology provides chines based on key factors. Moreover, KOMTRAX finds
out machines with problems from your fleet and shows you
insightful data about your equipment
through an optimal interface.
and fleet in user-friendly format.

Energy Saving Operation Report

KOMTRAX delivers the energy-saving operation report based

on the operating information such as fuel consumption, load
summary and idling time, which helps you efficiently run a
business.

Location

Working status

Periodic maintenance

This report image is an example

of hydraulic excavator The report contents and data depend on the machine model.

Optimal Strategy for Efficient Work

The detailed information that KOMTRAX puts at your fingertips helps you manage your fleet
conveniently on the web anytime, anywhere. It gives you the power to make better daily and
long-term strategic
decisions.

11
MAINTENANCE

Easy Checking and

Wide Catwalk Washable Cab Floormat
Maintenance of Engine
Engine check points are concentrated Easier, safer operator cab access and Cab floormat is easy to keep clean.
on one side of the engine to facilitate maintenance checks. The gently inclined surface has a
daily checks. Thermal guards are flanged floormat and drainage holes to
placed around high-temperature parts facilitate runoff.
such as turbocharger.

Steps Connected to the

Machine Cab Electric Pump, Grease Gun
with Indicator (Optional)
Steps allows
access from left Greasing is made easy with the electric
hand catwalk to pump and grease gun with indicator.
One-touch Drain Cock
top of machine for
engine check and
Easier, cleaner engine oil changes.
maintenance.

Easy Cleaning of Cooling Unit

Convenient Utility Space to
Reverse-rotation function of the hy- the Machine Cab
draulic driven fan simplfies cleaning out Utility space pro- Grease can drum storage location
the cooling unit. In addition, this func- vides great con-
tion contributes to reducing warming- venience to store
up run time tools, spare parts,
in low tem- etc.
perature and
discharging
Grease gun
hot air from The grease gun can be Indicator
reached from ground level.
the engine
room to keep Divided Type
appropriate Engine Cover
heat balance. The divided engine
cover allows easily
access to inspec-
Long-life Oil, Filter tion points around
the engine.
Uses high-performance
filtering materials and
long-life oil. Extends the
oil and filter replacement
interval.
Hydraulic oil filter

Engine oil &

Engine oil filter every 500 hours
Hydraulic oil every 5000 hours
every 1000 hours
Photo may include
Hydraulic oil filter optional equipment.

12
 HYDR AULIC EXCAVATOR PC850-8R1
KOMATSU BRAND BUCKET

KOMATSU Brand Bucket

Me Bucket Feature
• Low resistant excavation
• High productivity
• High durability
• High fuel efficiency
Conventional Me bucket

Category and Feature

Category Load / Wear / Soil (Application) Image

Load
Machine power is high during majority of the work.
Medium, but continuous shock load
Heavy Duty
Wear
HD Material is abrasive. Light scratch marks can be seen at the bucket.
Soil
Limestone, shot rock, compact mix of sand, gravel and clay

Load
Machine power is mostly medium, but occasionally high.
Bucket movements are smooth with minor shock load.
General Purpose Bucket penetrates easily.
GP Wear
Material is lightly abrasive. Some sand may be medium abrasive.
Soil
Mostly loose sand, gravel and finely broken materials

Bucket Line-up
Boom + Arm (m)
Capacity (m3) Tooth Tooth Type Photo
Bucket Type Width*1 (mm) Weight* 2 (kg) STD SE
(ISO 7451) Quantity No.
8.04+3.6 7.1+2.9 7.1+3.6 KMAX
3.40 1870<1820>[2315] 3990 5 — — ✓ 1
4.00 2050<2000>[2490] 4230 5 — — ✓ 2
4.00 2050<2000>[2490] 4260 5 — — ✓ 3
Conventional
4.00 2100<2000> [ — ] 3730 5 — — ✓ 4
4.30 2250<2150> [ — ] 3940 6 — — ✓ 5
4.50 2330<2230> [ — ] 4030 6 — — ✓ 6
Me Bucket 4.50* 3 2100<2000>[2490] 4585 5 — — ✓ 7
5.00* 3 — —
Special Order 5.50* 3 *4 Special order — — Special order
6.00* 3 *4 — —
*1 With side shrouds, < > without side shrouds, [ ] Bucket lip width *2 With side shrouds *3 Special Features Request (SFR) required for Komatsu authorization by application.
*4 For LC undercarriage model only : General purpose use, density up to 1.8 t/m3 : General purpose use,density up to 1.5 t/m3 ✓ : Selectable

1 2 3 4

5 6 7

13
SE SPEC.

PC850-8R1 SE spec. is
equipped with a large 2 arm cylinders

bucket. It increases the ef-

SE boom
ficiency of loading a dump
truck with large amounts
Large
of loose materials such as bucket
cylinder OPG top
blasted rock. guard level 2
(ISO 10262)
SE arm

Cab mount
working lights
Cab front
guard level 2
(ISO 10262)

Large bucket Horn interconnected

with warning light
(Flashing light)

Photos may include optional equipment.

OPTIONS

• Cab front full height guard level 2 (ISO 10262) • Lower wiper • Flashing light

• Rain visor
• Strengthened track
frame undercover

14
 HYDR AULIC EXCAVATOR PC850-8R1
KOMATSU TOTAL SUPPORT

Komatsu Total Support

To keep your machine available and minimize operation cost Technical support
when you need it, Komatsu Distributor is ready to provide a Komatsu product support service (Technical support) is de-
variety of supports before and after procuring the machine. signed to help customer. Komatsu Distributor offers a variety
of effective services to show how much Komatsu is dedicated
Fleet recommendation to the maintenance and support of Komatsu machine.
Komatsu Distributor can study the customer’s job site and • Preventive Maintenance (PM) clinic
provide the most optimum fleet recommendation with de- • Oil & Wear analysis program
tailed information to meet all of your application needs when • Undercarriage inspection service, etc.
you are considering to buy new machines or replace the
existing ones from Komatsu.

Repair & maintenance service

Komatsu Distributor offers quality repair and maintenance
service to the customer, utilizing and promoting Komatsu
developed programs.
Product support
Komatsu Distributor gives the proactive support and secures Komatsu Reman (Remanufactured)
the quality of the machinery that will be delivered. components
Komatsu Reman products are the result of
Parts availability the implementation of the Komatsu global
Komatsu Distributor is available for emergency inquiry by the policy which establishes and agrees to reduce the owning,
customers for genuine, quality guaranteed Komatsu parts. operating and total Life Cycle Costs (LCC) to Komatsu’s cus-
tomer through high quality, prompt delivery and competitively
priced in own remanufactured products (QDC).

15
SPECIFICATIONS

ENGINE DRIVES AND BRAKES

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D140E-5 Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals

Type. . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injection Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydrostatic
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled Travel motor . . . . . . . . . . . . . . . . Axial piston motor, in-shoe design
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Reduction system . . . . . . . . . . . . . . . Planetary gear triple reduction
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 mm Maximum drawbar pull . . . . . . . . . . . . . . . . . . . . . . 559 kN 57000 kg
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 mm Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15.24 L Maximum travel speed
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, electronic Low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.8 km/h
Horsepower: High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.2 km/h
SAE J 1995 . . . . . . . . . . . . . . . . . . . . . . . . . .Gross 370 kW 496 HP Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
ISO 9249 / SAE J1349* . . . . . . . . . . . . . . . . . .Net 363 kW 487 HP Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Oil disc brake
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 min-1
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic

* Net horsepower at the maximum speed of radiator cooling fan is 338 kW 454HP.
U.S. EPA Tier 2 and EU Stage 2 emissions equivalent. UNDERCARRIAGE

Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-leg frame

Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed
HYDRAULIC SYSTEM Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
No. of shoes (Each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Type. . . . . . . . . . . . . . . . . . . . . . . Open-center load-sensing system
No. of carrier rollers (Each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 2
No. of track rollers (Each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Main pump:
Type . . . . . . . . . . . . . . . . . . . . . . . Variable-capacity piston pumps
Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits
Maximum flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 494 L/min
COOLANT AND LUBRICANT CAPACITY
Fan drive pump . . . . . . . . . . . . . . . . . . Variable capacity piston type (REFILLING)
Hydraulic motors:
Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 L
Swing . . . . . . . . . .2 x axial piston motor with swing holding brake Radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 L
Relief valve setting: Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 L
Implement circuits . . . . . . . . . . . . . . . . . . . 31.4 MPa 320 kg/cm2 Final drive, each side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 L
Travel circuit . . . . . . . . . . . . . . . . . . . . . . . . 34.3 MPa 350 kg/cm2 Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24.5 x 2 L
Swing circuit . . . . . . . . . . . . . . . . . . . . . . . . 28.4 MPa 290 kg/cm2 Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 L
Heavy lift circuit . . . . . . . . . . . . . . . . . . . . . 34.3 MPa 350 kg/cm2
Pilot circuit . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9 MPa 30 kg/cm2
Hydraulic cylinders:
(Number of cylinders—bore x stroke x rod diameter)
Boom . . . . . . . . . . . . . . . . . . . . 2 – 200 mm x 1950 mm x 140 mm OPERATING WEIGHT (APPROXIMATE)

Arm (STD/SE) . . . . . . . . . . . . . . 2 – 185 mm x 1610 mm x 120 mm

PC850-8R1: Operating weight, including 8040 mm boom, 3600 mm
Bucket
arm, ISO 7451 heaped 3.40 m3 backhoe bucket, operator, lubricant,
STD . . . . . . . . . . . . . . . . . . . . . 1 – 185 mm x 1820 mm x 130 mm
coolant, full fuel tank, and the standard equipment
SE . . . . . . . . . . . . . . . . . . . . . . 1 – 225 mm x 1420 mm x 160 mm
PC850-8R1 SE spec.: Operating weight, including 7100 mm boom,
2945 mm arm, ISO 7451 heaped 4.30 m3 backhoe bucket, operator,
lubricant, coolant, full fuel tank, and the standard equipment

PC850-8R1 PC850-8R1 SE Spec.

SWING SYSTEM
Operating Ground Operating Ground
Driven method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic motors Shoes Weight Pressure Weight Pressure
Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear 128 kPa 128 kPa
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . .Grease-bathed 610 mm 79000 kg 78600 kg
1.31 kg/cm2 1.31 kg/cm2
Swing lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Oil disc brake
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.8 min-1 112 kPa 111 kPa
710 mm 79800 kg 79400 kg
1.14 kg/cm2 1.13 kg/cm2

16
 HYDR AULIC EXCAVATOR PC850-8R1

DIMENSIONS

B 4280 Unit: mm

4345 3195
R=4400
A

4000
3640

3670
840
1560
4500 610

50
5810 3500
4110
3390*
* When retracted
Model PC850-8R1 PC850-8R1 SE Spec.
Boom Length 8040 mm 7100 mm
Arm Length 3600 mm 2945 mm
A Overall height 4850 mm 4615 mm
B Overall length 13995 mm 13130 mm

WORKING RANGE

H Model PC850-8R1 PC850-8R1 SE Spec.

14
Boom Length 8040 mm 7100 mm
13
Arm Length 3600 mm 2945 mm 3600 mm
12
11 A Max. digging height 11955 mm 11330 mm 11055 mm
10 B Max. dumping height 8235 mm 7525 mm 7430 mm
9 C Max. digging depth 8445 mm 7130 mm 7790 mm
8 Max. vertical wall
7 D 5230 mm 4080 mm 4260 mm
digging depth
A 6 Max. digging depth of
5 E 8310 mm 6980 mm 7680 mm
cut for 2440 mm level
B 4 F Max. digging reach 13660 mm 12265 mm 12710 mm
3
Max. digging reach at
2 G 13400 mm 11945 mm 12400 mm
ground level
1
H Min. swing radius 5985 mm 5645 mm 5440 mm
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Bucket digging force 345 kN 428 kN 345 kN
SAE J 1179

1
Rating

at power max. 35200 kg 43600 kg 35200 kg

2
D 3
Arm crowd force at 312 kN 363 kN 312 kN
power max. 31800 kg 37000 kg 31800 kg
E 4
C Bucket digging force 397 kN 471 kN 397 kN
5
ISO 6015
Rating

at power max. 40500 kg 48000 kg 40500 kg

6
7
Arm crowd force at 327 kN 374 kN 327 kN
power max. 33300 kg 38100 kg 33300 kg
8
9
10
11
2440
G
F

: PC850-8R1 8040 mm boom, 3600 mm arm

: PC850-8R1 SE spec. 7100 mm boom, 2945 mm arm
: PC850-8R1 SE spec. 7100 mm boom, 3600 mm arm

17
 LIFTING CAPACITY

A PC850-8R1
A: Reach from swing center
B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
Cs: Rating over side
B C
: Rating at maximum reach

HEAVY LIFT "OFF"

PC850-8R1 Boom: 8040 mm Arm: 3600 mm Bucket: 3.40 m3 ISO 7451 heaped Shoe: 610 mm double grouser Counterweight: 11.85 t
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
6.0 m *9300 kg 8650 kg *11050 kg *11050 kg *12800 kg *12800 kg
3.0 m 9850 kg 7250 kg *13250 kg 12300 kg *16450 kg *16450 kg *22050 kg *22050 kg
0m 9850 kg 7150 kg *14800 kg 10950 kg *18700 kg 14750 kg *20950 kg *20950 kg *19850 kg *19850 kg
–3.0 m *11800 kg 8600 kg *14350 kg 10550 kg *18150 kg 14250 kg *21250 kg 20750 kg *21150 kg *21150 kg *24450 kg *24450 kg
–6.0 m *12550 kg *12550 kg *12900 kg *12900 kg *17050 kg *17050 kg *21300 kg *21300 kg

HEAVY LIFT "ON"

PC850-8R1 Boom: 8040 mm Arm: 3600 mm Bucket: 3.40 m3 ISO 7451 heaped Shoe: 610 mm double grouser Counterweight: 11.85 t
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
6.0 m *10550 kg 8650 kg *12850 kg *12850 kg *14750 kg *14750 kg
3.0 m 9850 kg 7250 kg *15400 kg 12300 kg *18950 kg *16800 kg *23400 kg *23400 kg
0m 9850 kg 7150 kg 14800 kg 10950 kg 19950 kg 14750 kg *20950 kg *20950 kg *22100 kg *22100 kg
–3.0 m 11800 kg 8600 kg 14350 kg 10550 kg 19400 kg 14250 kg *21250 kg 20750 kg *21150 kg *21150 kg *24450 kg *24450 kg
–6.0 m *14850 kg *14850 kg *15250 kg *15250 kg *20000 kg *20000 kg *21300 kg *21300 kg
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No.10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

A PC850-8R1 SE Spec.
A: Reach from swing center
B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
Cs: Rating over side
B C
: Rating at maximum reach

HEAVY LIFT "OFF"

PC850-8R1 SE Spec. Boom: 7100 mm Arm: 2945 mm Bucket: 4.30 m3 ISO 7451 heaped Shoe: 610 mm double grouser Counterweight: 11.85 t
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
6.0 m *12150 kg 11100 kg *12650 kg *12650 kg *14250 kg *14250 kg
3.0 m 12400 kg 9250 kg *14500 kg 12350 kg *17700 kg 17100 kg *23250 kg *23250 kg
0m 12700 kg 9400 kg 15250 kg 11350 kg *19700 kg 15450 kg *26050 kg 22250 kg *28450 kg *28450 kg
–3.0 m *14400 kg 12350 kg *17850 kg 15300 kg *23350 kg 22200 kg *30850 kg *30850 kg *31850 kg *31850 kg

HEAVY LIFT "ON"

PC850-8R1 SE Spec. Boom: 7100 mm Arm: 2945 mm Bucket: 4.30 m3 ISO 7451 heaped Shoe: 610 mm double grouser Counterweight: 11.85 t
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
6.0 m *14100 kg 11100 kg *14650 kg 13600 kg *16350 kg *16350 kg
3.0 m 12400 kg 9250 kg 16300 kg 12350 kg *20350 kg 17100 kg *26550 kg 24850 kg
0m 12700 kg 9400 kg 15250 kg 11350 kg 20650 kg 15450 kg *29800 kg 22250 kg *31350 kg *31350 kg
–3.0 m 16500 kg 12350 kg 20550 kg 15300 kg *26850 kg 22200 kg *32100 kg *32100 kg *31850 kg *31850 kg
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No.10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

18
 HYDR AULIC EXCAVATOR PC850-8R1

TRANSPORTATION GUIDE

Transportation specifications (Length x height x width)

Specs shown include the following equipment:
STD spec. : Boom 8040 mm, Arm 3600 mm, Bucket 3.40 m3, Shoes 610 mm double grouser
SE spec. : Boom 7100 mm, Arm 2945 mm, Arm 3600 mm, Bucket 4.30 m3, Shoes 610 mm double grouser

3 Kits Transportation 4 Kits Transportation

Work equipment assembly Work equipment assembly
Weight : STD spec. : 18.9 t Weight : STD spec. : 18.9 t
SE spec. : 18.5 t SE spec. : 18.5 t

Boom Boom

STD spec. : 8.1 t : 8370 x 2695 x 1500 mm STD spec. : 8.1 t : 8370 x 2695 x 1500 mm
SE spec. : 7.3 t : 7430 x 2480 x 1500 mm SE spec. : 7.3 t : 7430 x 2480 x 1500 mm

Arm Arm

STD spec. : 4.5 t : 4765 x 1450 x 710 mm STD spec. : 4.5 t : 4765 x 1450 x 710 mm
SE spec. : 4.9 t : 4075 x 1690 x 715 mm (2945 mm SE arm) SE spec. : 4.9 t : 4075 x 1690 x 715 mm (2945 mm SE arm)
: 4.5 t : 4765 x 1450 x 710 mm (3600 mm SE arm) : 4.5 t : 4765 x 1450 x 710 mm (3600 mm SE arm)

Bucket Bucket

STD spec. : 4.0 t : 2470 x 1880 x 2070 mm STD spec. : 4.0 t : 2470 x 1880 x 2070 mm
SE spec. : 3.9 t : 2280 x 1950 x 2250 mm SE spec. : 3.9 t : 2280 x 1950 x 2250 mm

Boom & Arm cylinder Boom & Arm cylinder

Total 2.5 t Total 2.5 t

Upper structure
6040 mm

Base machine
2845 mm

(Both PC850-8R1 and PC850-8R1 SE spec. are designed with the same
weight and dimensions.)
3720 mm

Width : 3225 mm
Weight : 26.3 t

Undercarriage 1000 mm
1445 mm

6900 mm
Width : 3390 mm
Weight : 47.7 t
5810 mm
610 mm
Weight : 21.4 t [10.7 t x 2]

Others 980 Others 980

mm mm
Weight : 12.4 t OPG Weight : 12.4 t OPG

mm 319 mm 319
950 5m m 950 5m m
m m m
250 mm

250 mm

820 0m
182
1790 mm

1790 mm

1
55 kg 55 kg
1540 mm

1540 mm

80 kg 80 kg

179 mm 179 mm
0m 80 0m 80
Weight : 11.9 t m Weight : 11.9 t m
500 500
500 mm 500 mm
mm mm m mm mm m
900 0m 900 0m
1 320 1 320

30 kg 50 kg 30 kg 50 kg

19
 STANDARD EQUIPMENT
ENGINE AND RELATED ITEMS: • Damper mount, all-weather, sound-sup- • Shockless boom control
• Air cleaner, double element, dry pressed cab with tinted safety glass win- • Swing priority mode system
• Engine, Komatsu SAA6D140E-5 dows, lockable door, intermittent window • Two axial piston motors for swing with
• Variable speed cooling fan, with fan guard wiper and washer, floormat, cigarette single-stage relief valve
lighter and ashtray • Two control valves, 5+4 spools (Boom,
ELECTRICAL SYSTEM: • Multi-function color monitor, electronically- arm, bucket, swing, and travel)
• Alternator, 24 V/60 A controlled throttle dials, electric service • Two-mode setting for boom
• Auto decelerator and auto idling system meter, gauges (Coolant temperature, • Two variable capacity piston pumps
• Batteries, 2 x 12 V/170 Ah hydraulic oil temperature and fuel level),
• Starting motors, 11 kW caution lights (Electric charge, engine oil DRIVE AND BRAKE SYSTEM:
• Step light with timer pressure, and air cleaner clogging), indica- • Brakes, hydraulic lock travel brakes, oil
• Working lights tor lights (Engine preheating and swing lock disc parking
2 on boom, 1 at right front, 2 on cab light) level check lights (Coolant, engine oil, • Hydrostatic two travel speed system with
and hydraulic oil level), self-diagnostic sys- planetary triple reduction final drive
UNDERCARRIAGE: tem with trouble data memory
• 8 track/3 carrier rollers (Each side) • Rear view mirror (RH and LH) OTHER STANDARD EQUIPMENT:
• Hydraulic track adjusters (Each side) • Seat, fully adjustable with suspension • Automatic swing holding brake
• Rock protectors • Catwalk
• Sealed track HYDRAULIC CONTROLS: • Counterweight, 11850 kg
• Track shoe: • Control levers and pedals for steering • Horn, electric
—610 mm double grouser and travel with PPC system • Large handrails
• Variable track gauge • Control levers, wrist control levers for arm, • Marks and plates, English
boom, bucket, and swing with PPC system • One-touch engine oil drainage
GUARDS AND COVERS: • Fully hydraulic, with Electronic Open- • Paint, Komatsu standard
• Dust-proof net for radiator and oil cooler center Load Sensing System and engine • Preventive Maintenance (PM) tune-up
• Full length track roller guard speed sensing (Pump and engine mutual service connector
• OPG top guard level 2 (ISO 10262) control system) • Rear reflector
• Pump/engine room partition cover • Heavy lift mode system • Slip-resistant plates
• Strengthened revolving frame underguard • In-line filter • Travel alarm
• Travel motor guards • Oil cooler • Water separator
• One axial piston motor per track for travel
OPERATOR ENVIRONMENT: with counter balance valve
• Cab with fixed front window • Power max function

OPTIONAL EQUIPMENT
• 12 V electric supply • Booms: • Large-capacity batteries
• Alternator, 24 V/90 A PC850-8R1: • Lower wiper
• Arms: —8040 mm boom assembly • Provision for fast fuel fill
PC850-8R1: PC850-8R1 SE spec.: • Radio AM/FM
—3600 mm arm assembly —7100 mm SE boom assembly • Rain visor
PC850-8R1 SE spec.: • Cab front guard level 2 (ISO 10262) • Rear view monitor system
—2945 mm SE arm assembly • Coolant heater • Seat belt 78 mm, 50 mm
—3600 mm SE arm assembly • Double flange track roller • Spare parts for first service
• Attachment piping specification equips • Electric pump, grease gun with indicator • Track frame undercover (Center)
for breaker installation • Fire extinguisher • Track shoe:
(For PC850-8R1 SE spec.) • General tool kit —710 mm double grouser
• Automatic air conditioner (A/C) • Interconnected horn and warning light • Vandalism protection locks

https://home.komatsu/en/ Printed in Japan 201803 IP.As

CEN00431-03 Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.