KABASALAN NATIONAL HIGH SCHOOL

BUDGET OF WORK - GRADE 7

ELECTRICAL INSTALLATION AND MAINTENANCE NC II
SCHOOL YEAR 2016-2017

NO. OF
BASIC COMPETENCIES WEEK DATE
DAYS

FIRST GRADING
Lesson 1 Participate in a Workplace Communication
a. Communication and gathering information 1 2 June 14 to 15
b. Active Listening Skills
* Cues on Effective Listening 1 1 16-Jun
* Common Pitfalls when Listening 1 1 17-Jun
c. Effective Speaking 2 2 June 20 to 21
d. Protocol and team dynamic communication rights and
2 1 22-Jun
responsibilities.
Lesson 2 Work Team Environment
a. What is a team environment. 2 2 June 23 to 24
b. Types of activities that are better done by one person
3 1 27-Jun
b.1 Advantages of working alone
c. Types of activities are better done in a group
3 1 28-Jun
c.1. Advantages of working in a team
d. Describe team role and scope 3 2 June 29 to 30
Lesson 3 Practice Professionalism in a Workplace
a. Integrate personal goals with organizational goals. 3 1 1-Jul
b. Set and meet work priorities 4 1 4-Jul
c. Maintaining professional growth. 4 1 5-Jul
Lesson 4 Practicing Occupational Health and Safety
a. Identify hazard and risk 4 2 July 6 to 7
b. Evaluate Hazard and Risk 4&5 3 July 8 to 12
d. Control hazard and risks. 5&6 3 July 13 to 15
 NO. OF
COMPETENCIES WEEK DATE
DAYS

THIRD GRADING
Lesson 4 Maintain Tools and Equipment
LO1 Check condition of tools and equipment
* Classification of tools and equipment 22 & 23 7 Oct. 20 to Nov. 4
* Basic maintenance of tools and equipment 24 5 Nov. 7 to 11
* Personal protective device 25 5 Nov. 14 to 18
LO2 Perform basic preventive maintenance
* Types and uses of lubricants
*

* Different types of forms 9 5 July 29 to Aug 4.

LO3 Receive and inspect electrical supplies, materials, and
tools
* Receiving and inspecting freight shipments 10 & 11 8 Aug. 5 to 11
C II

PERFORMANCE/
SUMMATIVE
TEST
PERFORMANCE/
SUMMATIVE
TEST

1
 KABASALAN NATIONAL HIGH SCHOOL
Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Kabasalan National High School
F.L. Peña, Kabasalan, Zamboanga Sibugay

BUDGET OF WORK IN ELECTRICAL INSTALLATION AND MAINTENANCE - GRADE 7

SCHOOL YEAR 2016-2017
NO. OF SUMMATIVE
BASIC COMPETENCIES CODE DATE NO. OF HOURS
TEST

FIRST GRADING
Lesson 1 Introduction to Electricity CON 724308
1.1 History of electricity June 5-6, 2017 4
1.1.1 Uses of Electricity June 7, 2017 2
1
1.2 Conductors and Insulators June 8-9, 2017 4
First Summative Test June 13, 2017 2
1.3 Voltage, Current and Resistance June 14-15, 2017 4
1.3.1 Ohm's Law June 16 & 19, 2017 4
1.3.2 Measuring Tools and Instruments June 20-21, 2017 4
Second Summative Test June 22, 2017 2
Lesson 2. Prepare Electrical materials and tools TLE_IAEI7/8UT-0a-1
2.1 Electric Circuits June 23, 24-27, 2017 10
2.2 Common Electrical Tools and Equipment June 28, 8
1
2.3 Common Electrical Supplies and Materials 8
Third Summative Test 2
2.4 Different Types of Forms 8
 NO. OF SUMMATIVE
BASIC COMPETENCIES CODE DATE NO. OF HOURS
TEST

Lesson 3 Practicing Occupational Health and Safety Procedure (OHSP)

3.1 Definition of Terms and Acronyms 2
LO1. Identify hazard and risk TLE_IAEI7/8OS-0h-1 4 1
Fourth Summative Test 2
LO2. Evaluate Hazard and Risk TLE_IAEI7/8OS-0h-2
I.S. 2.1 What is risk assessment? 4
I.S.2.2 Philippine Clean Air Act of 1999 10
LO3. Controlling hazard and risks. TLE_IAEI7/8OS-0h-3 1
I.S. 3.1 Hazard Control 6
I.S 3.2 Your Health and Safety in Work 4
I.S. 3.3 Emergency Preparedness 4
Fifth Summative Test 2

Prepared by: Noted by: Approved by;

SAMUEL A. CAMBONGA SERAFIN A. BALBOA JR. MA. COLLEEN L. EMORICHA, Ed. D.

Teacher I Head Teacher IV Sec. School Principal III
 Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Kabasalan National High School
F.L. Peña, Kabasalan, Zamboanga Sibugay

BUDGET OF WORK IN ELECTRICAL INSTALLATION AND MAINTENA

SCHOOL YEAR 2017-2018

COMPETENCIES CODE

FIRST GRADING
Lesson 1 Prepare Electrical Materials and Tools
LO1 Prepare electrical materials and tools for the task TLE_IAEI7/8UT-0a-1
1.1 Electrical tools and equipment
1.2 Electrical supplies and materials
First Summative Test
1.3 Common wire splices and joints
1.4 Skinning of wires using different tools and equipment
Second Summative Test
1.5 Connecting skinned wires to wiring materials
1.6 Splicing of wires
1.7 Making an extension cord
Third Summative Test
LO2 Request appropriate supplies, materials, and tools for a specific job. TLE_IAEI7/8UT-0a-2
2.1 Different types of forms
2.1.1 Requisition Slip Form
2.1.2 Inventory of Materials Form
2.1.3 Job or Work Order Form
2.1.4 Equipment Borrower's Form
LO3 Receive and inspect electrical supplies, materials, and tools TLE_IAEI7/8MT-0b-3
3.1 Receiving and inspecting freight shipments
Fourth Summative Test
First Quarter Exam
SECOND GRADING
Lesson 2 Performing Mensuration and Calculation
LO1 Select electrical measuring tools and instruments TLE_IAE7/8MC-0c-1
1.1 Measuring Tools and Instruments
First Summative Test
LO 2 Carry out measurements and calculation TLE_IAE7/8MC-0d-2
 2.1 System of Measurement
2.2 English Unit to English Unit
2.3 Metric Unit to Metric Unit
2.4 Englis Unit to Metric Unit
2.5 Metric Unit to English Unit
Second Summative Test
2.6 Parts of a Multi-Tester
2.7 Reading of Resistance in Ohms
2.8 Reading of AC Volts
2.9 Reading of DC Volts
Third Summative Test
Lesson 3 Interpret Technical Drawings and Plan
LO 1 Analyze Signs, Symbols, and Data TLE_IAE7/8ID-0e-1
1.1 Common Electrical Symbols
1.2 Common Electrical Signs
Fourth Summative Test
Second Quarter Exam
THIRD GRADING
LO 2 Interpret technical drawings and plans TLE_IAE7/8ID-0e-2
2.1 Electrical Wiring Diagram
2.2 Types of Circuit
First Summative Test
2.3 Electrical Plans
2.4 Parts of Electrical Plans
2.5 Request of Electrical Materials
Second Summative Test
Lesson 4 Maintain Tools and Equipment
LO1 Check condition of tools and equipment TLE_IAE17/8MT-0f-1
1.1 Classification of tools and equipment
1.1.1 Hand Tools
1.1.2 Machine/Power Tools
1.1.3 Pneumatic Tools
Third Summative Test
1.2 Basic maintenance of tools and equipment
1.3 Personal Protective Device
LO2 Perform basic preventive maintenance TLE_IAE17/8MT-0f-2
* Types and uses of lubricants
Fourth Summative Test
Third Quarter Exam

COMPETENCIES WEEK

FOURTH GRADING
* Types and kind of cleaning solvent
 * 5s Approach in Workshop Keeping
First Summative Test
LO3 Store tools and equipment TLE_IAE17/8MT-0f-3
* Maintaining and storing tools and equipment.
* Inventory of tools and equipment
* Procedure in arranging and storing tools and equipment
Second Summative Test
Lesson 5 Practice Occupational Health and Safety Procedures
LO1 Identify hazards and risks TLE_IAE17/80S-0h-1
* Hazard and risks
* Chemical hazards
* Physical hazards
* Biological hazards
* Ergonomic hazard/Physiological hazards
Third Summative Test
LO2 Evaluate hazards and risks TLE_IAE17/80S-0h-2
* What is risk assessment
* Fire and explosion hazards assessment
Philippine Clean Air Act of 1999
LO3 Controlling hazards and risks TLE_IAE17/80S-0h-3
* Hazard control
* Your health and safety in work
* Emergency preparedness
Fourth Summative Test
Fourth Quarter Exam

Prepared by: Noted by:

SAMUEL A. CAMBONGA SERAFIN A. BALBOA JR.

Teacher I Head Teacher IV
ula
tion
gay
School
ibugay

AND MAINTENANCE - GRADE 8

8
PERFORMANCE/
NO. OF
DATE SUMMATIVE
HOURS
TEST

June 5-7, 2017 6

June 8-9 & 13, 2017 6 1
June 14, 2017 2
June 15-23, 2017 14
June 27-30 & July 3, 2017 10 1
July 4, 2017 3
July 5-11, 2017 10
July 12-18, 2017 10
1
July 19-24, 2017 8
July 25, 2017 2

July 26-31 & Aug. 1, 2017

July 26-27, 2017 4
July 28 & 31, 2017 4 1
Aug. 1-2, 2017 4
Aug. 3-4, 2017 4

Aug. 7-8, 2017 4

Aug. 9, 2017 2
August 10-11, 2017 4
G

Aug. 14-18, 2017 10 1

Aug. 22, 2017 2
 Aug. 23-29, 2017 10
Aug. 30-31 & Sept. 1, 2017 6
Sept. 4-6, 2017 6 1
Sept. 7-11, 2017 6
Sept. 12-14, 2017 6
Sept. 15, 2017 2
Sept. 18-20, 2017 6
Sept. 21-26, 2017 8
Sept. 27-29, 2017 6 1
Oct. 2-4, 2017 6
Oct. 5, 2017 2

Oct. 6-11, 2017 8 1

Oct. 12-17, 2017 8
Oct. 18, 2017 2
Oct. 19-20, 2017 4

Nov. 2-8, 20017 10

1
Nov. 9-15, 2017 10

Nov. 16-21, 2017 8

Nov. 22-27, 2017 8
Nov. 29-30 & Dec. 1, 2017 6 1

Dec. 4-6, 2017 6

Dec. 7-8 & 11, 2017 6 1
Dec. 12-14, 2017 6

Dec. 15-19, 2017 6

Jan. 3-4, 2018 4
1
Jan. 5, 8-9, 2018 8
Jan. 10, 2018
Jan. 11-12, 2018 4
NO. OF
NO. OF
DATE SUMMATIVE
HOURS
TEST
G
Jan. 15-17, 2018 6
1
 Jan. 18-19, 2018 4 1
Jan. 22, 2018 2

Jan. 23-25, 2018 6

Jan. 26-30, 2018 6 1
Jan. 31 & Feb. 1-2, 2018 6
Feb. 5, 2018 2

Feb. 6-8, 2018 6

Feb. 9, 12-13, 2018 6
1
Feb. 14-16, 2018 6
Feb. 19-21, 2018 6
Feb. 22-23, 26, 2018 6
Feb. 27, 2018 2

Feb. 28, Mar. 1, 2018 4

March 2 & 5, 2018 4
March 6-9, 2018 8
1
March 12-13, 2018 4
March 14, 2018 2
March 15, 2018 2
March 16, 2018 2
March 19-20, 2018 4

Approved by;

MA. COLLEEN L. EMORICHA, Ed. D.

Sec. School Principal III
 Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Kabasalan National High School
F.L. Peña, Kabasalan, Zamboanga Sibugay

BUDGET OF WORK IN ELECTRICAL INSTALLATION AND MAINTE

SCHOOL YEAR 2017-2018

COMPETENCIES CODE

FIRST GRADING
Lesson 1 INSTALL ELECTRICAL LIGHTING SYSTEMs, AUXILLARY OUTLETS TLE_IAEL9EL-
AND LIGHTING FIXTURES IIa-IVJ-1
LO1 Layout and install electrical wiring using knob and tube.
1.1 Principle of Knob and Tube
1.2 Spacing of Split Knob and Conductors
1.3 Safety reminders when installing knob and tube wiring.
1.4 Installing two bulbs controlled by two single pole single throw switch in one
location.

1.5 Install three bulbs controlled individually by three single pole switch in one location.
1.6 Install two bulb controlled by two single pole switch in two location.
First Summative Test
LO2 Layout and install PVC raceway/molding
2.1 Surface Raceways
2.2 Install three bulb controlled by three single pole switch controlled in two different
location using PVC raceway/molding.
2.2 Install three bulb controlled by three single pole switch controlled in three different
location using PVC raceway/molding.
LO3 Layout and install rigid non-metallic conduit.
3.1 Rigid Non-Metallic Conduit (PVC)
Second Summative Test
3.2 Installation of non-metallic conduit PEC requirements
3.3 Identifying Different types of bend
3.4 Bending of 90° PVC Elbow
3.5 PVC Offset Bending
3.6 Install two bulbs connected in series controlled by one single pole switch and one
bulb controlled by another single pole switch in one location.
3.7 Install two bulbs connected in series controlled by one single pole switch and other
two bulbs controlled by another single pole switch in two locations.
Third Summative Test
LO4 Layout and install flexible non-metallic conduit.
 4.1 Flexible Non-metallic Conduit
4.2 Install two bulbs connected in parallel controlled by one single pole switch and one
bulb controlled by another single pole switch in one location.
4.3 Install two bulbs connected in series controlled by one single pole switch and other
two bulb connected in parallel controlled by another single pole switch in two locations.
Fourth Summative Test
First Quarter Exam
SECOND GRADING
LO5 Assemble flourescent lighting fixtures CON724312
5.1 Types of Fluorescent lighting fixtures
5.2 Parts and functions of fluorescent lamp
5.3 Assembling open type 20 watts fluorescent lamp
5.4 Assembling of 40 watts box type fluorescent lamp.
First Summative Test
LO6 Layout and install flourescent lighting fixtures
6.1 Install 2-flourescent lamp controlled by 2-SPST switch in one location with one
gang outlet using flexible non-metallic conduit. (Safety Switch - line to line connection)
6.2 Install 3-Fluorescent lamp controlled by 3-SPST in one location with three gang
convenience outlet. (Safety Switch - line to ground connection)
6.3 Install 2-flourescent lamps controlled by two SPSTswitch in two locations using
flexible non-metallic conduit with two 3-gang outlet. (Circuit Breaker - line to line
connection)
6.4 Install 3-flourescent lamps controlled by 3-SPST switch in two locations with two 3-
gang outlet. (CB - line to line connection)
6.5 Install 3-flourescent lamps controlled by 3-SPST in three locations with two 3-gang
outlet. (Circuit Breaker - line to line connection)
Second Summative Test
LO7 Layout and install incandescent lamp.
7.1 History and development of incandescent lamp.
7.2 Classification of Incandescent Lamp
7.3 Install incandescent 4-lamps controlled in 4-different locations with two convenience
outlet using rigid non-metallic conduit in line to ground connection.
Third Summative Test
LO8 Layout and install high intensity lamp
8.1 Kinds of high intensity discharge lamp
8.2 Uses of high intensity lamp
8.3 Install incandescent 5-lamps controlled in 2-different locations with three
convenience outlet using rigid non-metallic conduit in line to ground connection.
Fourth Summative Test
Second Quarter Exam
THIRD GRADING
Lesson 1 INSTALL WIRING DEVICES FOR FLOOR AND GROUND FAULT TLE_IAEI10WD-
CURRENT INTERRUPTING OUTLETS IIIa-Ivj-1
LO1 - Layout and install electrical boxes on wood, metal studs and concrete walls.
 1.1 PEC Provision in Installing Electrical Boxes
1.2 Installing box in finished space
1.3 Installation of electrical boxes in wiring board
First Summative Test
LO2 - Select wiring devices
2.1 Types of wiring devices
2.2. Kinds of Switches and Relays

2.3 Install incandescent 4-lamps controlled by two 2-SPST two bulb connected in
series and the other 2 bulb connected in parallel with 1 convenience outlet (line to line
connection)
Second Summative Test
2.4 Contactors
2.5 Conductors/Insulators
2.6 Receptacles and other wiring accessories
2.7 Install incandescent 4-lamps controlled by two 2-SPST two bulb connected in
series and the other 2 bulb connected in parallel with 2 convenience outlet (line to ground
connection)
Third Summative Test
LO3 - Layout and install wiring devices
3.1 NEC Provision on installing wiring devices.
3.2 Installation of wiring devices for floor and ground fault current interrupting outlet.
3.3 Layout and install 1 bulb controlled by 2-3way switch
3.4 Layout and install 2 bulbs controlled by individual switch and 1 bulb controlled by
2-3way switch in two locations
Fouth Summative Test
Third Quarter Exam
FOURTH GRADING
Lesson 1 INSTALL ELECTRICAL PROTECTION SYSTEM FOR LIGHTING AND CON724311
GROUNDING.
LO1 - Layout and install fuse panel.
1.1 Philippine Electrical Code (PEC) provision for circuit protection (Fuse Panel)
1.2 Principles and operation of different type of fuses
First Summative Test
1.3 Classification of fuses.
1.4 Types of Safety Switches Enclosure
1.5 Planning and preparing for installing Fuse Panel
1.6 Layout and install 2 bulbs controlled by individual SPST switch and 1 bulb
controlled by 2-3way switches in two locations with 1 convenience outlet.
Second Summative Test
LO2 - Layout and install Panel Board
2.1 Philippine Electrical Code (PEC) provision for circuit protection. (Panel Board)
2.2 Principles and operation of Circuit Breakers
2.3 Layout and install 2 bulbs controlled by individual SPST switch and 1 bulb
controlled by 2-3way switches in two locations with 2 convenience outlet.
2.4 Layout and install 2 bulbs controlled by individual SPST switch and 2 bulbs
controlled by 2-3way switches in two locations with 2 convenience outlet.
Third Summative Test
 2.5 Circuiting guidelines
2.6 Installing wire receptacle circuit to a load center
2.7 Load center accessories and their uses
2.8 Layout and install 3 bulbs controlled by individual SPST switch and 2 bulbs
controlled by 2-3way switches in two locations with 2 convenience outlet (line to line
connections)
2.9 Layout and install 3 bulbs controlled by individual SPST switch and 2 bulbs
controlled by 2-3way switches in two locations with 2 convenience outlet (line toground
connections)
Fouth Summative Test
Fourth Quarter Exam

Prepared by: Noted by:

SAMUEL A. CAMBONGA SERAFIN A. BALBOA JR.

Teacher I Head Teacher IV
 pines
Peninsula
ucation
Sibugay
High School
anga Sibugay

ION AND MAINTENANCE - GRADE 9

7-2018

NO. OF
DATE NO. OF HOURS
SUMMATIVE TEST

ING

June 5-6, 2017 4

June 7, 2017 2
June 8, 2017 2

June 9 & 13, 2017 4

1

June 14-15, 2017 4

June 16 & 19, 2017 4

June 20, 2017 2

June 21-23, 2017 6

June 27 - 28, 2017 4

1
June 29-30, 2017 4

July 3-4, 2017 4

July 5, 2017 2
July 6-7, 2017 4
July 10, 2017 2 1
July 11-13, 2017 6
July 14-18, 2017 6

July 19-21, 2017 6

1
July 24-26, 2017 6

July 27, 2017 2

1
 July 28-31, 2017 4

Aug. 1-3, 2017 6

1

Aug. 4-8, 2017 6

Aug. 9, 2017 2
Aug. 10-11, 2017 4
DING

Aug. 14-15, 2017 4

Aug. 16-17, 2017 4
1
Aug. 18 & 24, 2017 8
Aug. 25-31, 2017 8
Sept. 1, 2017 2

Sept. 4-6, 2017 6

Sept. 7-11, 2017 6

Sept. 12-14, 2017 6 1

Sept. 15-19, 2017 6

Sept. 20-22, 2017 6

Sept. 25, 2017 2

Sept. 26-27, 2017 4 1

Sept. 28-29, 2017 4

Oct. 2-4, 2017 6

Oct. 5, 2017 2

Oct. 6-9, 2017 4

Oct. 10-11 , 2017 4
1
Oct. 12-17, 2017 8

Oct. 18, 2017 2

Oct. 19-20, 2017 4
ING

1
 Nov. 2-3, 207 4
Nov. 6-10, 2017 10 1
Nov. 13-16, 2017 8
Nov. 17, 2017 2

Nov. 20-21, 2017 4

Nov. 22-24, 2017 6
1

Nov. 27-29, 2017 6

Dec. 1, 2017 2
Dec. 4-5, 2017 4
Dec. 6-7, 2017 4
Dec. 8-11, 2017 4
1

Dec. 12-14, 2017 6

Dec. 15, 2017 2

Dec. 18-19, 2017 4

Dec. 20, 2017 & Jan. 3, 2018 4
Jan. 4-5, 2018 4 1
Jan. 8-9, 2018 4

Jan. 10, 2018 2

Jan. 11-12, 2018 4
DING

Jan. 15-17, 2018 6

Jan. 18-22, 2018 6 1
Jan. 23, 2018 2
Jan. 24-29, 2018 8
Jan. 30-31, 2018 4
Feb. 1-5, 2018 6
1
Feb. 6-8, 2018 6

Feb. 9, 2018 2

Feb. 12-14, 2018 6

Feb. 15-16, 2018 4

Feb. 19-21, 2018 6 1

Feb. 22-26, 2018 6

Feb. 27, 2018 2

Feb. 28 & March 1, 2018 4
March 2-5, 2018 4
March 6-7, 2018 4

March 8-12, 2018 6

1

March 13-15, 2018 6

March 16, 2018 2

March 19-20, 2018 4

Approved by;

MA. COLLEEN L. EMORICHA, Ed. D.

Sec. School Principal III
 Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Kabasalan National High School
F.L. Peña, Kabasalan, Zamboanga Sibugay

BUDGET OF WORK IN ELECTRICAL INSTALLATION AND MAINTEN

SCHOOL YEAR 2017-2018

COMPETENCIES CODE

FIRST GRADING

LESSON 1: SELECT ELECTRICAL POWER AND HYDRAULIC TOOLS

LO 1: Select Power Tools
1.1 The Power Hand Drill Tools and Its Part
1.1.1 Types of Bits
1.2 The Grinder and Its Part
1.2.1 Kinds of Grinding Wheels
* Identify the different Parts of Power Tools
First Summative Test
LO 2: Select Hydraulic Tools
2.1 The Hydraulic Pipe Bender and Jack Hammers
2.1.1 Determining the Power Rating of Electric Power Tools
2.1.2 Procedure in Replacing Power Cord
2.1.3 How to Replace Carbon Brush
* Layout and Install three bulbs controlled by an individual single pole switch in two
locations with 1 convnience outlet (line to line connection)
Second Summative Test
Lesson 2: Performing Roughinh-In Activities for Communication and
Distribution System
LO 1: Layout and Install Telephone Terminal Cabinets and Frame
1.1 Provisions of Installing Telephone Terminal Cabinet
1.2 Types of Communication System
* Layout and install 4 bulbs controlled by two single pole switch in one locations
with one convenience outlet in line to ground connection
Third Summative Test
LO 2: Layout and Install Wire Ways
2.1 Provisions for Metal and Non-Metallic Wire Ways
2.2 Types of Wire Ways (Metal and Non-Metal)
LO 3: Layout and Install Cable Tray / Cable Bridge
* Layout and install three bulbs controlled by an individual SPST in one locations
with two convenience outlet in line to ground connection
Fourth Summative Test
First Quarter Exam

COMPETENCIES CODE

SECOND GRADING
Lesson 1: Performing Roughing-in Activities for Communications and Distribution System Using Metallic Conduit
1.1 PEC Provision on Electrical Metallic Tubing
1.2 Types of EMT Fittings and boxes
1.3 Types of Bends and Personal Protective Equipment
* Layout and install one bulb controlled by two three way switch with one convenience outlet using
circuit breaker for concealed wiring
* Layout and install one bulb controlled by two three way switch and one SPST as master switch with
one convenience outlet and one special purpose outlet using circuit breaker for concealed wiring
First Summative Test
1.4 Perform Cutting Electrical Metallic Tubing
1.5 Perform Bending Metallic Tubing (Elbow Bend)
1.6 Perform Bending Metallic Tubing (Offset Bend)
1.7 Perform Installation of Metallic Tubing
Second Summative Test
Lesson 2: Layout and Install Rigid Metallic Tuning
2.1 PEC Provision on Rigid Metallic Conduit (RMC)
2.2 Install Rigid Metallic Conduit (RMC)
* Layout and install one bulb controlled by two three way switch and two bulbs controlled by individual
single pole switch with one convenience outlet and special purpose outlet using circuit breaker for
concealed wiring
Lesson 3: Layout and Install Flexible Metallic Tubing
3.1 PEC Provision on Flexible Metallic Tubing
3.2 Install Flexible Metallic Conduit
3.3 Draw a wiring Diagram Based on the Given Plan/Working Drawing
Third Summative Test
Lesson 4: Layout and Install Intermediate Metallic Tubing
4.1 PEC Provision on Intermediate Metallic Tubing
4.2 Install Intermediate Metallic Tubing
4.3 Draw a Wirning Diagram Based on the Given Plan/Working Drawing
Fourth Summative Test
Second Quarter Exam
THIRD GRADING
Lesson 1: Ohm's Law
1.1 Ohm's Law Statement and Ohm's Law Fromula
1.2 Computation of Current, Voltage, and Resistance
1.3 Computation of Power
First Summative Test
Lesson 2: Types of Circuit
2.1 Series Circuit and Its Characteristics
2.2 Parallel Circuit and Its Characteistics
2.3 Draw a wiring diagram of 4 bulbs connected in series controlled by two single
pole switch
2.3 Draw a wiring diagram of 4 bulbs connected in parallel controlled by two single
pole switch
Second Summative Test
Lesson 3: Electrical Plan
3.1 Parts of Electrical Plan
3.2 Schedule of Load and Computation
* For Lighting Loads
* For Appliance Loads
* For Other Loads
3.3 Draw an Electrical Floor Plan
Third Summative Test
Lesson 4: Install Wiring Devices
4.1 Types of Wiring Devices
4.2 Mounting of Receptacles
4.3 Grounding and Ground Fault
* Layout and install 1 bulb controlled by two 3-way switch and one 4-way switch
in three locations
* Layout and install 1 bulb controlled by two 3-way switch and one 4-way switch
in three locations and other 2 bulbs controlled by individual SPST.
Fourth Summative Test
Third Quarter Exam
FOURTH GRADING
Lesson 1: Installation of Communication, Signaling Devices and Remote Control Systems on Auxilliary Equipment
LO 1: Layout and Install Alarm System
1.1 PEC Requirements in Installing Signal and Alarm
1.2 Check Condition of Buzzer, Chime and Bell
1.3 Install Buzzer and Bell Circuit
1.4 Draw a schematic and wiring diagram of annunciator system
First Summative Test
Lesson 2: Sensor Switches
2.1 Types of Sensor Switches
2.2 Commissioning Electrical System
* Testing the continuity in the circuit and reading of voltage
Lesson 3: Relay and Magnetic Contactor
3.1 Types of Relay and Magnetic Contactor

* Layout and install 1 bulb controlled by two 3-way switch and two 4-way switch
in four locations and other 2 bulbs controlled by individual SPST.
Second Summative Test
Lesson 4: AC and DC Motor
4.1 Types of DC Motor
4.2 Type of AC Motor
4.3 Direct Online Control and Power Circuit
Third Summative Test
Lesson 5: Republic Act No. 7832
5.1 Anti - Electricity and Electric Transmission Lines/Materials Pilferage Act of
1994
* Layout and install 1 bulb controlled by two 3-way switch and three 4-way switch
in five locations and other 2 bulbs controlled by individual SPST.
Fourth Summative Test
Fourth Quarter Exam

Prepared by: Noted by:

SAMUEL A. CAMBONGA SERAFIN A. BALBOA JR.

Teacher I Head Teacher IV
lippines
a Peninsula
Education
ga Sibugay
High School
boanga Sibugay

TION AND MAINTENANCE - GRADE 10

017-2018
NO. OF
NO. OF
DATE SUMMATIVE
HOURS
TEST
DING

June 5-6, 2017 4

June 7, 2017 2
June 8-9, 2017 4
1
June 13, 2017 2
June 14-15, 2017 4
June 16, 2017 2

June19-20, 2017 4
June 21, 2017 2
June 22, 2017 2
June 23, 2017 2 1

June 27-29, 2017 6

June 30, 2017 2

July 3-4, 2017 4

July 5-6, 2017 4
1
July 7-12, 2017 8

July 13, 2017 2

July 14, 17-20, 2017 10

July 21, 24-27, 2017 10
July 28,31 Aug. 1-3, 2017 10 1

August 4-8, 2017 6

 1

Aug. 9, 2017 2
August 10-11, 2017 4
NO. OF
NO. OF
DATE SUMMATIVE
HOURS
TEST
ADING
Using Metallic Conduit
August 14-15, 2017 4
Aug. 16-17, 2017 4
Aug. 18-22, 2017 4

August 23-25, 29, 2017 8 1

Sept. 4-7, 2017 8

Sept. 8, 2017 2
Sept. 11-12, 2017 4
Sept. 13-14, 2017 4
Sept. 15 & 18, 2017 4
Sept. 19-21, 2017 6 1
Sept. 22, 2017 2

Sept. 25, 2017 2

Sept. 26-27, 2017 4

Sept. 28-29 & Oct. 2, 2017 6

1
Oct. 3-4, 2017 4
Oct. 5-6, 2017 4
Oct. 9-10, 2017 4
Oct. 11, 2017 2

Oct. 12, 2017 2

Oct. 13 &16, 2017 4 1
Oct. 17-18, 2017 4
Oct. 18, 2017 2
Oct. 19-20, 2017 4
DING

Nov. 2-3, 2017 4

Nov. 6-8, 2017 6 1
Nov. 9-10, 2017 4
Nov. 13, 2017 2
 Nov. 14-16, 2017 6
Nov. 17, 20-21, 2017 6

Nov. 22-23, 2017 4

1

Nov. 24 & 27, 2017 4

Nov. 28, 2017 2

Nov. 29, 2017 2

1
Dec. 1-4, 2017 4
Dec. 5-6, 2017 4
Dec. 7-8, 2017 4
Dec. 11-13, 2017 6
Dec. 14, 2017 2

Dec. 15-18, 2017 4

Dec. 19, 2017 2
Dec. 20, 2017 2

Jan. 3-4, 2018 4 1

Jan. 5, 8-9, 2018 6

Jan. 10, 2018 2

Jan. 11-12, 2018 4
ADING
on Auxilliary Equipment

Jan. 22-23, 2018 4

Jan. 24-25, 2018 4
1
Jan. 26-31, 2018 8
Feb. 1-2, 2018 4
Feb. 5, 2018 2

Feb. 6-7, 2018 4

Feb. 8-12, 2018 6
Feb. 13-16, 2018 8
1
Feb. 19-20, 2018 4

Feb. 21-23, 2018 6

Feb. 27, 2018 2
Feb. 28 & March 1, 2018 4
March 2-5, 2018 4 1
March 6-7, 2018 4
March 8, 2018 2

March 9, 12-13, 2018 6

1
March 14-15, 2018 4

March 16, 2018 2

March 19-20, 2018 4

Approved by;

MA. COLLEEN L. EMORICHA, Ed. D.

Sec. School Principal III
 Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Bulawan National High School
Bulawan, Payao, Zamboanga Sibugay

BUDGET OF WORK IN MATHEMATICS - GRADE 9

School Year 2017 - 2018

CONTENT PERFORMANCE LEARNING COMPETENCY

CONTENT STANDARDS STANDARDS CODE
The learner... The learner... The learner...
Grade9 - FOURTH QUARTER
Geometry demonstrates is able to apply the
understanding of the concepts of trigonometric
basic concepts of ratios to formulate and
trigonometry. solve real-life problems
with precision and
accuracy
1. illustrates the six trigonometric ratios: sine,
cosine, tangent, secant, cosecant, and M9GE-IVa-1
cotangent.

2. finds the trigonometric ratios of special M9GE -IVb-c-

angles. 1

3. illustrates angles of elevation and angles of M9GE-IVd-1

depression.

4. uses trigonometric ratios to solve real-life M9GE-IVe-1

problems involving right triangles. ***

5. illustrates laws of sines and cosines. M9GE-IVf-g-1

6. solves problems involving oblique triangles. M9GE-IVh-j-1

Prepared
of the Philippines
amboanga Peninsula
ent of Education
Zamboanga Sibugay
tional High School
ao, Zamboanga Sibugay

N MATHEMATICS - GRADE 9
Year 2017 - 2018

DATE LEARNING MATERIALS

COVERED

BEAM Third Year Module

12 (TG) APEX Lesson
1-7 Quadrilaterals
Geometry Chapter 1
Geometry of Shape and Size
Quadrilaterals p.17 Chapter 4
Quadrilaterals 4.1.3
Jan. 15-19, 2018 The Parallelogram and its
properties p.124 (LM)

Jan. 22-26, 2018

Jan. 29-Feb. 2,
2018
BEAM Fourth Year, Module 13
(TG), Triangle Trigonometry,
Feb. 5-9, 2018 Module 2 (LM)

BEAM Fourth Year, Module 13

(TG), Triangle Trigonometry,
Feb. 12-16, 2018 Module 2 (LM)

Feb. 19-23, 2018 BEAM Fourth Year, Module 13

Feb. 26-March 2, (TG)
2018
BEAM Fourth Year, Module 13
March 5-9, 2018 (TG), Triangle Trigonometry,
March 12-14, Module 2 (LM)
2018
Prepared by:
ELMER C. ANDILAB
 Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Bulawan National High School
Bulawan, Payao, Zamboanga Sibugay

BUDGET OF WORK IN MATHEMATICS - GRADE 8

School Year 2019 - 2020

CONTENT PERFORMANCE LEARNING COMPETENCY

CONTENT STANDARDS STANDARDS
The learner... The learner... The learner...
Grade8 - FIRST QUARTER
Patterns and demonstrates is able to formulate real-
Algebra understanding of key life problems involving . factors completely different types of
concepts of factors of factors of polynomials, polynomials (polynomials with common
polynomials, rational rational algebraic monomial factor, difference of two squares,
algebraic expressions, expressions, linear
equations and inequalities square trinomials, andofgeneral
sum and difference two cubes, perfect
linear equations and trinomials).
inequalities in two in two variables, systems
variables, systems of of linear equations and
linear equations and inequalities in two
inequalities in two variables and linear
variables and linear functions, and solve these
functions. problems accurately using
a variety of strategies

solves problems involving factors of

polynomials.

illustrates rational algebraic expressions.

simplifies rational algebraic expressions.

performs operations on rational algebraic

expressions.
 solves problems involving rational algebraic
expressions.

illustrates the rectangular coordinate system

and its uses.**

. illustrates linear equations in two variables.

illustrates the slope of a line.

finds the slope of a line given two points,

equation, and graph.

writes the linear equationax + by= c the form

y= mx + b and vice versa.

graphs a linear equation given (a) any two

points; (b) the x – and y – intercepts; (c) the
slope and a point on the line.***
. describes the graph of a linear equation in
terms of its intercepts and slope.***
finds the equation of a line given (a) two
points; (b) the slope and a point; (c) the slope
and its intercepts.
equations in two variables. M8AL-Ig-2
illustrates a system of linear equations in two
variables.
graphs a system of linear equations in two
variables.***

categorizes when a given system of linear

equations in two variables has graphs that are
parallel, intersecting, and coinciding.

solves a system of linear equations in two

variables by (a) graphing; (b) substitution; (c)
elimination.***
ula
tion
ay
School
bugay

TICS - GRADE 8

DATE EXPECTED OUTPUT

CODE COVERED

M8AL-Ia-b-1 June. 3-5, 2018

M8AL-Ib-2 June 7-10, 2019

M8AL-Ic-1 june 11-13,2019

June 17-18,
M8AL-Ic-2 2019

June 19-20,
M8AL-Ic-d-1 2019
 June 24-25,
M8AL-Id-2 2019

June 26-27,
M8AL-Ie-1 2019

M8AL-Ie-3 July 1-2, 2019

M8AL-Ie-4 July 3-5, 2019

M8AL-Ie-5 July 8-9, 2019

M8AL-If-1 July 10-12, 2019

M8AL-If-2 July 15-16, 2019

M8AL-If-2 July 17-19, 2019

M8AL-If-3 July 22-23, 2019

M8AL-Ig-2 24-Jul-19

M8AL-Ih-1 July 25-26, 2019

M8AL-Ih-2 July 29-31, 2019

August 1 -2,
M8AL-Ih-3 2019 - August 5,
2019

August 1 -2,
M8AL-Ii-j-1 2019 - August 5,
2020
Prepared by:
SHEILA C. MUILLO
 Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Bulawan National High School
Bulawan, Payao, Zamboanga Sibugay

BUDGET OF WORK IN MATHEMATICS - GRADE 7

School Year 2019 - 2020

CONTENT PERFORMANCE LEARNING COMPETENCY

CONTENT STANDARDS STANDARDS
The learner... The learner... The learner...
Grade7 - FIRST QUARTER
Numbers and demonstrates is able to formulate
Number understanding of key challenging situations describes well-defined sets, subsets, universal
Sense concepts of sets and the involving sets and real sets, and the null set and cardinality of sets.
real number system. numbers and solve these
in a variety of strategies. illustrates the union and intersection of sets
and the difference of two sets.

uses Venn Diagrams to represent sets,

subsets, and set operations

represents the absolute value of a number

on a number line as the distance of a number
from 0.

performs fundamental operations on

integers.

. illustrates the different properties of

operations on the set of integers.

Expresses rational numbers from fraction

form to decimal form and vice versa.

arranges rational numbers on a number line.

performs operations on rational numbers

 describes principal roots and tells whether
they are rational or irrational.

determines between what two integers the

square root of a number is.

estimates the square root of a whole number

to the nearest hundredth.

plots irrational numbers (up to square roots)

on a number line.***

illustrates the different subsets of real

numbers.

arranges real numbers in increasing or

decreasing order.

. writes numbers in scientific notation and

vice versa.

represents real-life situations which involve

real numbers.

solves problems involving real numbers.

solves problems involving real numbers.

solves problems involving real numbers.

solves problems involving real numbers.

solves problems involving real numbers.

ula
tion
ay
School
bugay

TICS - GRADE 7

DATE LEARNING MATERIALS

CODE COVERED

Practical Mathematics Chapter

M7NS-Ia-1 June. 3-5, 2018 1 Lesson 1.1 p. 5- 14

M7NS-Ia-2 June 7-10, 2019

Practical Mathematics Chapter
1 Lesson 1.1 p. 25-30
M7NS-Ib-1 june 11-13,2019

Practical Mathematics Chapter

June 17-18, 2 Lesson 2.3 p.49- 51
M7NS-Ic-1 2019

Practical Mathematics Chapter

June 19-20, 2 Lesson 2.2 p. 5- 14
M7NS-Ic-d-1 2019

Practical Mathematics Chapter

June 24-25, 2 Lesson 2.1 p. 5- 14
M7NS-Id-2 2019

Practical Mathematics Chapter

June 26-27, 2 Lesson 2.6 p. 79-87
M7NS-Ie-1 2019

Practical Mathematics Chapter

M7NS-Ie-2 July 1-2, 2019 2 Lesson 2.6 p. 79-87

Practical Mathematics Chapter

M7NS-If-1 July 3-5, 2019 2 Lesson 2.6.2.1 p. 90-110
 Practical Mathematics Chapter
M7NS-Ig-1 July 8-9, 2019 2 Lesson 2.7.1 p. 111-114

Practical Mathematics Chapter

M7NS-Ig-2 July 10-12, 2019 2 Lesson 2.7.1 p. 111-114

Practical Mathematics Chapter

M7NS-Ig-3 July 15-16, 2019 2 Lesson 2.7.1 p. 111-114

Practical Mathematics Chapter

M7NS-Ig-4 July 17-19, 2019 2 Lesson 2.7.1 p. 111-114

Practical Mathematics Chapter

M7NS-Ih-1 July 22-23, 2019 2 Lesson 2.1 p. 35-38

Practical Mathematics Chapter

M7NS-Ih-2 24-Jul-19 2 Lesson 2.1 p. 38-42

Practical Mathematics Chapter

M7NS-Ii-1 July 25-26, 2019 2 Lesson 2.9 p. 118-119

Practical Mathematics Chapter

M7NS-Ii-2 July 29-31, 2019 2 Lesson 2.5 p. 53-54

Practical Mathematics Chapter

August 1 -2, 2 Lesson 2.5.6 p. 74-76
M7NS-Ij-1 2019 - August 5,
2019

solves solves problems solves problems involving real

problems
involving real involving real numbers.
numbers.
numbers.

solves solves problems solves problems involving real

problems
involving real involving real numbers.
numbers.
numbers.
 solves solves problems solves problems involving real
problems
involving real involving real numbers.
numbers.
numbers.

solves solves problems solves problems involving real

problems
involving real involving real numbers.
numbers.
numbers.

Prepared by:
SHEILA C. MUILLO
 Republic of the Philippines
Region IX, Zamboanga Peninsula
Department of Education
Division of Zamboanga Sibugay
Bulawan National High School
Bulawan, Payao, Zamboanga Sibugay

BUDGET OF WORK IN MATHEMATICS - GRADE 8

School Year 2019 - 2020

CONTENT PERFORMANCE LEARNING COMPETENCY

CONTENT STANDARDS STANDARDS
The learner... The learner... The learner...
Grade8 - FIRST QUARTER
Patterns and demonstrates is able to formulate real-
Algebra understanding of key life problems involving . factors completely different types of
concepts of factors of factors of polynomials, polynomials (polynomials with common
polynomials, rational rational algebraic monomial factor, difference of two squares,
algebraic expressions, expressions, linear
equations and inequalities square trinomials, andofgeneral
sum and difference two cubes, perfect
linear equations and trinomials).
inequalities in two in two variables, systems
variables, systems of of linear equations and
linear equations and inequalities in two
inequalities in two variables and linear
variables and linear functions, and solve these
functions. problems accurately using
a variety of strategies

solves problems involving factors of

polynomials.

illustrates rational algebraic expressions.

simplifies rational algebraic expressions.

performs operations on rational algebraic

expressions.
 solves problems involving rational algebraic
expressions.

illustrates the rectangular coordinate system

and its uses.**

. illustrates linear equations in two variables.

illustrates the slope of a line.

finds the slope of a line given two points,

equation, and graph.

writes the linear equationax + by= c the form

y= mx + b and vice versa.

graphs a linear equation given (a) any two

points; (b) the x – and y – intercepts; (c) the
slope and a point on the line.***
. describes the graph of a linear equation in
terms of its intercepts and slope.***
finds the equation of a line given (a) two
points; (b) the slope and a point; (c) the slope
and its intercepts.
equations in two variables. M8AL-Ig-2
illustrates a system of linear equations in two
variables.
graphs a system of linear equations in two
variables.***

categorizes when a given system of linear

equations in two variables has graphs that are
parallel, intersecting, and coinciding.

solves a system of linear equations in two

variables by (a) graphing; (b) substitution; (c)
elimination.***
ula
tion
ay
School
bugay

TICS - GRADE 8

DATE EXPECTED OUTPUT

CODE COVERED

M8AL-Ia-b-1 June. 3-5, 2018

M8AL-Ib-2 June 7-10, 2019

M8AL-Ic-1 june 11-13,2019

June 17-18,
M8AL-Ic-2 2019

June 19-20,
M8AL-Ic-d-1 2019
 June 24-25,
M8AL-Id-2 2019

June 26-27,
M8AL-Ie-1 2019

M8AL-Ie-3 July 1-2, 2019

M8AL-Ie-4 July 3-5, 2019

M8AL-Ie-5 July 8-9, 2019

M8AL-If-1 July 10-12, 2019

M8AL-If-2 July 15-16, 2019

M8AL-If-2 July 17-19, 2019

M8AL-If-3 July 22-23, 2019

M8AL-Ig-2 24-Jul-19

M8AL-Ih-1 July 25-26, 2019

M8AL-Ih-2 July 29-31, 2019

August 1 -2,
M8AL-Ih-3 2019 - August 5,
2019

August 1 -2,
M8AL-Ii-j-1 2019 - August 5,
2020
Prepared by:
SHEILA C. MUILLO