ACUFLEX Catalogue

ACUFEX™ and
ACUFEX Pro
Punches, Scissors, etc. Punches, Scissors, Graspers
and Knives
• Unrivaled strength, durability

and sharpness
• Designed with a broad range

of tips and configurations
• Preferred pinless hinge design

Punches, Scissors, Graspers and Knives J-1
ACUFEX™ and ACUFEX Pro

Handles and Tips
Smith & Nephew ACUFEX instruments are designed with a broad range of handles
and tip configurations, allowing easy access to specific areas of the meniscus.
ACUFEX Pro Handle Loop Handle

Selected punches, scissors and graspers Scissors, basket punches and graspers
feature this ergonomic handle design. feature our traditional loop-style handles.
Cigar Handle ACUFEX Grasper Handle

Available on rotary basket punches All ACUFEX graspers feature this
and scissors. infinite-position, locking-handle design.
Tip Selection Guide
Straight: Upbiter: Upswept: Left and Right:

The primary style for Angled 1/4" curve at tip for Angled shaft follows the Angled to reach the anterior
direct approach enhanced access to the contour of the condyle and and posterior menisci
posterior meniscus keeps the cutting surface
parallel to the tibial plateau
Call+1-800-343-5717
Call +1 800 343 5717 (U.S.) or contact your local representative.
J-2 Punches, Scissors, Graspers and Knives

Punches
ACUFEX punches are offered in a broad range of tips and configurations. Each punch is
constructed with our exclusive pinless hinge design, one-piece outer shaft and hand-honed
edge to provide unrivaled strength, durability and sharpness.
Narrowline Family DUCKBILL™ Family DUCKLING™ Family

The small aggressive tip design and narrow The wave-tooth design combined with a wide Combining the wide-bite horizontal cutting
shaft provides excellent maneuverability and bite allows for the maximum amount of tissue capability of the DUCKBILL Punch with the
multiple plane-cutting capability in the poste- to be smoothly resected in tight knees. thinnest possible tip provides optimum
rior horn of the meniscus in the tightest joint. maneuverability under the condyle.
Oval Punch Family Blunt Nose OVERBITER™ Punch

The lowest profile tip with the largest bite offers The blunt nose and small size enables this Designed to resect the superior leaflet of the
the most versatile instrument available. The instrument to get into the posterior horn for medial meniscus during an arthroscopic partial
curved saw design enables smooth contouring flush trimming of the meniscus. meniscectomy. Elevated lower tip prevents
of the meniscus. meniscus from resting against the tibia, while
blunt nose allows instrument to lie squarely
against the posterior horn area for flush trimming.
Posterior Family STINGRAY™ Punch Meniscal Elevator

The gradually tapered shaft, low-profile tip and The back-biting capability of this punch offers The meniscal elevator is designed to slide
short-jaw design permit the tip to open wide for the most direct access to the anterior meniscus. easily under a tight meniscus. The elevated tip
cutting in tight posterior compartments. Available with a left- and right-sided bite. prevents the meniscus from setting back down
on the tibia, making successive bites easy.
Scoop Family – 1.0 mm Scoop Family – 1.3 mm Scoop Family – 1.5 mm

The small size of this versatile punch, combined The seven unique shaft configurations of the 1.3 The long jaw and wide design of the 1.5 mm
with the horizontal cutting capability, increases mm punches allow maneuverability in difficult- family produce a wider, deeper cut than that
maneuverability where height is a limiting factor. to-access areas of the meniscus. of the 1.3 mm punch.
90° Rotary Straight Scissor Punch Upbiter Scissor Punch

This punch offers an effective angle for trimming The scissor punch, with its small bite size, The upcurve tip of the upbiter scissor punch
the difficult-to-access anterior meniscus. The allows for increased visibility and consistently permits convenient shear cutting in the
unique design of the tip allows for successive provides a clean shear cut. posterior aspect of the knee.
bites, ideal for balancing the meniscal rim.
Special, Made to Order products are available to meet the individual needs of surgeons. Please appreciate that longer lead
time for delivery should be expected. For more information, please contact your sales representative or Customer Service.

Punches
Basket Punches – Narrowline
The narrow shaft and compact jaw design facilitates access and use in tight
spaces, particularly useful in the posterior aspect of the knee.
ACUFEX Pro ACUFEX
Reference # Reference # Description Tip Profile Bite Width Tip Width
7207053 012052* Straight 1.9 mm 1.67 mm 2.89 mm
7207052 012051* Upbiter 1.9 mm 1.67 mm 2.89 mm

7207658 012053 Upbiter, curved left 1.9 mm 1.67 mm 2.89 mm
7207660 012054 Upbiter, curved right 1.9 mm 1.67 mm 2.89 mm
7207659 012055* Upswept 1.9 mm 1.67 mm 2.89 mm

7208679 45° tip, left 1.5 mm 1.67 mm 2.89 mm
7208685 45° tip, right 1.5 mm 1.67 mm 2.89 mm
Reference # Description
7207552 Upswept, with larger finger and thumb loops
7207733 Narrowline upbiter, length extended by 2.25"
7207734 Narrowline upbiter, curved right, length extended by 2.25"
Basket Punches – DUCKBILL™

All-purpose, low-profile punches with a large square bite.
ACUFEX Pro ACUFEX
7207057 012013* Straight 2.52 mm 3.17 mm 5.05 mm
7207058 012014* Upbiter 2.52 mm 3.17 mm 5.05 mm

7207667 012015 Upbiter, curved left 2.52 mm 3.17 mm 5.05 mm
7207664 012016 Upbiter, curved right 2.52 mm 3.17 mm 5.05 mm
* Item shown Call +1 800 343 5717 (U.S.) or contact your local representative.

Punches
Oval Punches
This family of punches offers the best of both worlds — the lowest profile and the largest
bite, facilitating end-on and lateral cutting — the most versatile instrument available.
ACUFEX Pro ACUFEX
7207083 7207200 Upbiter 1.65 mm 4.39 mm 6.57 mm
7207181 7207201* Straight 1.65 mm 4.39 mm 6.57 mm
N/A 7207294 Curved left 1.65 mm 4.39 mm 6.57 mm
N/A 7207295 Curved right 1.65 mm 4.39 mm 6.57 mm
N/A 7207296 Upswept 1.65 mm 4.39 mm 6.57 mm
3134238 Curved left at 40 mm from tip
7207533 Upbiter, with larger finger and thumb loops
Basket Punches – Blunt Nose

ACUFEX Loop Handle. Blunt nose basket punch enables flush contouring of meniscus.
ACUFEX Pro ACUFEX
N/A 012035 1.0 mm, straight 1.83 mm 1.67 mm 3.32 mm
Basket Punches – DUCKLING™

The ACUFEX DUCKLING punches are a lower-profile relation to the duckbill™, maintaining a
large square bite and maximizing maneuverability.
ACUFEX Pro ACUFEX
7207049 012044* Straight 1.93 mm 3.17 mm 5.00 mm
7207050 012046 Curved left 1.93 mm 3.17 mm 5.00 mm
7207051 012047 Curved right 1.93 mm 3.17 mm 5.00 mm
7207668 014765 Elevator 1.93 mm 3.17 mm 5.00 mm
7207000 012045* Upbiter 1.93 mm 3.17 mm 5.00 mm
7207672 012048* Upswept 1.93 mm 3.17 mm 5.00 mm
7205979 Upswept, low profile, extended 20 mm
7207547 DUCKlING, 20° downbiter
7207737 DUCKLING, upswept, length extended by 2.25"
7207736 DUCKLING, upbiter, extended length
* Item shown Special, Made to Order products are available to meet the individual needs of surgeons. Please appreciate that longer lead

Punches
Posterior Punches
For the specific requirements of the posterior horn of the meniscus; the short, low-profile jaw
facilitates working in the tight confines of the posterior aspect of the knee.
ACUFEX Pro ACUFEX
7207662 012201* upbiter 2.46 mm 2.18 mm 4.00 mm
7207666 012202 upswept 2.46 mm 2.18 mm 4.00 mm
7207665 012203 straight 2.46 mm 2.18 mm 4.00 mm
7207661 012204 curved left 2.46 mm 2.18 mm 4.00 mm
7207663 012205 curved right 2.46 mm 2.18 mm 4.00 mm
Basket Punches – STINGRAY™

These backbiters enable simple access to the anterior horn of the meniscus.
ACUFEX Pro ACUFEX
7207055 012059 left 3.93 mm 2.38 mm 5.58 mm
7207054 012058* right 3.93 mm 2.38 mm 5.58 mm
7210730 STINGRAY Basket Punch, right, length extended by 2.25"
7210731 STINGRAY Basket Punch, left, length extended by 2.25"
Basket Punches – Scoop

The most traditional style of instrument, a classical punch shape with the parrot
beak upper jaw to help capture tissue.
ACUFEX Pro ACUFEX

72200719 012029* 1.0 mm, straight 2.28 mm 1.59 mm 3.25 mm
7207657 012040 1.3 mm, curved left 2.10 mm 1.59 mm 3.27 mm
7207656 012041 1.3 mm, curved right 2.10 mm 1.59 mm 3.27 mm
72200716 012030 1.3 mm, upbiter 2.10 mm 1.59 mm 3.27 mm
N/A 012042 1.3 mm, upbiter, 2.10 mm 1.59 mm 3.27 mm
curved left
N/A 012043 1.3 mm, upbiter, 2.10 mm 1.59 mm 3.27 mm
curved right
N/A 012031* 1.3 mm, upswept 2.10 mm 1.59 mm 3.27 mm
N/A 012033 1.3 mm, downbiter 2.10 mm 1.59 mm 3.27 mm
7207046 012034 1.5 mm, straight 2.28 mm 1.59 mm 3.88 mm
Basket Punches – Scoop, extended length for hip procedures

7207735 1.5 mm, upbiter, extended length

Punches
ACUFEX Pro ACUFEX
6901029 012020* 1.5 mm, upbiter 2.28 mm 1.59 mm 3.88 mm
N/A 012032 1.5 mm, upswept 2.28 mm 1.59 mm 3.88 mm
NOTE: The dimensions given refer to the height of the lower jaw at the distal end.
72202005 1.7 mm, straight, ACUFEX Pro Handle
Basket Punches – Meniscal Elevator

The extended lip of the lower jaw assists in placing the lower jaw underneath
less-mobile menisci.
ACUFEX Pro ACUFEX
Reference # Reference # Description
N/A 012060 1.3 mm, straight
7207671* 012061 1.3 mm, upbiter
Basket Punches – 90° Rotary

90° Rotary 2.2 mm – tip profile 3.36 mm, bite width 3.17 mm, tip width 6.79 mm
90° Rotary 3.4 mm – tip profile 3.86 mm, bite width 3.17 mm, tip width 6.79 mm
Loop Handle Cigar Handle

010912 010906 2.2 mm, left
010913* 010907 2.2 mm, right
N/A 010900 3.4 mm, left
N/A 010901 3.4 mm, right
Basket Punches – 90° Rotary, extended length for hip procedures

7207545* 2.2 mm left, extended length
7207544* 2.2 mm, right, extended length
Suction Punches
Punches and Accessories
DYOVAC™ Suction Punches
Offers the dual convenience of resecting tissue while simultaneously evacuating
through a suction channel in the instrument.
3499 2.5 mm, straight

2707* 3.4 mm, straight
3196* 4.5 mm, 90° left

3197 4.5 mm, 90° right
Accessories
Blade Retention Screws
12 per box
2714* For 3.4 mm suction punch
2699 For 5.2 mm suction punch
Replacement Blades
3585 For 3.4 mm suction punch, 1 each
3586 For 5.2 mm suction punch, 1 each
Cleaning Brushes
10 per box


Scissors
Smith & Nephew ACUFEX scissors are constructed without pins for maximum strength,
dependability, durability and safety.
A wide range of tips and angles enable the surgeon to effectively dissect any part
of the meniscus from virtually any direction.
Rotary Scissors
Loop Handle Cigar Handle
010814* 010800 20° hooked, left
010815 010801 20° hooked, right
010812* 010802 60° hooked, left

010813 010803 60° hooked, right
010816* N/A 20° short, serrated, left

010817 N/A 20° short, serrated, right
N/A 010806 20° serrated, left
N/A 010807 20° serrated, right
Scissors Punches
ACUFEX Pro ACUFEX
7207047 012036 Straight
7207048 012037 Upbiter
7207669 012038* Upbiter, curved left
7207670 012039 Upbiter, curved right
Meniscal OVERBITER™ Punch

Used where access is required into superior meniscal flap region.
ACUFEX Pro ACUFEX
N/A 7209878 Overbiter

Graspers
A broad selection of procedure-specific tip configurations provide maximum grasping
capability and allow easy access to all areas of the meniscus from a variety of approaches.
ACUFEX Grasper Handled Graspers feature an “infinite position” sliding-lock mechanism that
holds tissue firmly without tearing or slipping — even in the tightest areas.
Locking mechanism is not available on ACUFEX Pro.
Graspers – Loosebody Forceps

ACUFEX Pro ACUFEX
7207061* 011022 PITBULL™
72202517 Large PITBULL Grasper
7207731* N/A PITBULL Grasper, extended length
Graspers – Cupped
ACUFEX Pro ACUFEX
N/A 011012 2.7 mm
7207059* 011014 3.4 mm
N/A 7207700 3.4 mm, length extended by 2.25"
7207673 2.7 mm upcurved grasper, Alligator, ACUFEX Pro Handle
3134239 Grasper, cupped, 3.4 mm, no teeth
6900595Z Grasper, Johnson Jaw, 130 mm long
7205983 Grasper, Johnson Jaw Jr., 130 mm long
Rongeur
Loop Handle
014720* RAPTOR™
014843 RAPTOR Jr.
7207732 RAPTOR Rongeur, length extended by 2.25"
7207553 RAPTOR Rongeur with larger finger and thumb loops
7210757 RAPTOR Jr., down swept 10°

Graspers
ACUFEX Grasper Handled Graspers feature an “infinite position” sliding-lock mechanism that
holds tissue firmly without tearing or slipping — even in the tightest areas.
Locking mechanism is not available on ACUFEX Pro.
Graspers – Alligator
ACUFEX Pro ACUFEX
Reference # Reference # Description Tip Profile Tip Width
7207060* 011020 2.7 mm, straight 2.66 mm 3.05 mm
7207673 011021 2.7 mm, upcurved 2.66 mm 3.05 mm
N/A 011024* Alligator Max 3.17 mm 3.45 mm

N/A 7207699 Alligator Max, 3.17 mm 3.45 mm
length extended
by 2.25"
Graspers – Atraumatic
ACUFEX Pro ACUFEX
N/A 011030* Tissue Tensioner, straight
N/A 014779* Cannulated Tissue Tensioner, straight
Extremity Instruments
Extremity Arthroplasty Instruments

Shorter shafts and lower profile tips meet the specific demands of the small-joint surgeon.
Available individually or in a convenient system with a dedicated tray.
NOTE: 81.7 mm working length
Punches
014843 RAPTOR™ Jr. punch
014844 Blunt Nose Jr. punch
Micro Instrument Punches (overall reduced tip size)

7207600 MicroPunch, straight
7210754 MicroPunch, down swept 10°
7210754 MicroPunch, straight, down swept 10°
7207601 Teardrop punch, right
7210755 Teardrop punch, right, down swept 10°
7207602 Teardrop punch, left
7210756 Teardrop punch, left, down swept 10°
7210755 Teardrop punch, right, down swept 10°
7210756 Teardrop punch, left, down swept 10°
Graspers
014845 PITBULL™ Jr. grasper
013219 Small joint graspers
Micro Instrument Graspers (overall reduced tip size)

7207598 MicroGrasper, straight
7210753 MicroGrasper, down swept 10°
7207599 MicroGrasper, up 10°
72203613 MicroGrasper, straight with ratchet
7210753 MicroGrasper, straight, down swept 10°

Extremity Instruments
DYOVAC™ Suction Punches

3499 2.5 mm Suction Punch
Note: Suction Punch accessories can be found on page J-7.
Probes
3856 Probe, 3 mm
3312 Hook Probe, 0.39"/1 mm
7209134 ELITE™ Calibrated Probe, length: 8.5", tip height: 0.125", 0.165"/4.2 mm
7207760 Probe, 3 mm extended length: 11.6"
3134236 Small Joint Probe

3134237 Small Joint Elevator
Curettes
3134240 Curette, closed 3.0 mm, extended 4.0 cm shaft
3134266 Curette, NOTCHMASTER™, 6.0 mm
Chondral Picks
6900833 Chondral Pick, 3.5 mm, 45° bend
6900834 Chondral Tamp, 3.5 mm, 45° tip
ACUFEX™
Knives
ACUFEX Knives
010600 Hook - 3.0 mm straight, disposable† (5 per box)
010161* Hook - 5.0 mm straight, reusable
010610* Rosette - 3.0 mm straight, disposable† (5 per box)
010630 Banana - 3.0 mm, serrated, straight, disposable† (5 per box)

010121* Banana - 5.0 mm, serrated, straight, reusable
(NOTE: use 5.5 mm cannula)
010620* Meniscectomy - 3.0 mm, round tip, straight, disposable† (5 per box)
010640* Meniscectomy - 3.0 mm, serrated flat, straight, disposable† (5 per box)
010650* Meniscectomy - 3.0 mm, sharp tip, straight, disposable† (5 per box)
010660* Meniscectomy - 3.0 mm, V-shaped, straight, disposable† (5 per box)
010680* Reusable handle for disposable knife
3134216 3.0 mm, straight, sharp tip

3134217 5.0 mm, straight, sharp tip
Arthroscopic Hip Set Instrumentation - Knives

72203307* BEAVER® 4.0 mm Banana Blade, sterile, disposable (6 per box)
72203308* BEAVER® Handle and Wrench, reusable
7210758 Banana Blade Knife, reusable
72202487 Banana Blade Knife, cannulated, reusable
Magnetic Retrievers
011501 3.0 mm, curved, 30°
† Disposable knives are supplied as
a box of 5, single-use, sterile packs.
BEAVER® is a registered trademark of BVI.
Probes
Probes
010001* Straight
010525 Cannular, 3.0 mm, straight

010002* Curved, left 30°
010003 Curved, right 30°
7204869 3.0 mm, heavy hook (with handle)
* Item shown
Instrument Sterilization Tray
Sterilization Tray
011673 Linear Instruments Fifteen-unit Sterilization Tray

Recommended Handheld Instrument

Discoid meniscus
Parrot-beak tear Transverse tear Flap tear Bucket-handle tear Complex tear degeneration and tear
Parrot Beak Transverse Flap Bucket Handle Complex Discoid Menis

Posterior All Narrowline All Narrowline All Narrowline All Narrowline All Narrowline All Narrowline
All DUCKLING™ All DUCKLING All DUCKLING All DUCKLING All DUCKLING All DUCKLING
All Scissor Punches All Scissor Punches All Scissor Punches All Scissor Punches All Scissor Punches All Scissor Punches
Oval Punches Oval Punches 1.5 mm Upbiter 60° Hooked Scissors Oval Punches Oval Punches
Oval Punches
Middle All DUCKLING All DUCKLING All DUCKLING All DUCKLING All DUCKLING All DUCKLING
All 1.5 mm All 1.5 mm All 1.5 mm Oval Punches All 1.5 mm 60° Hooked Scissors
All 1.3 mm All 1.3 mm All 1.3 mm All 1.3 mm Oval Punches
1.0 mm Scoop 1.0 mm Scoop 1.0 mm Scoop 2.7 mm Punches
2.7 mm Punches All Scissor Punches DUCKLING Curved Oval Punches
3.4 mm Punches Oval Punches Scissor Punch Curved
Oval Punches Meniscal Elevator Meniscal Elevator
Oval Punches

Anterior 90° Punches 90° Punches 90° Punches 90° Punches 90° Punches 90° Punches
60° Hooked Scissors 60° Hooked Scissors 60° Hooked Scissors 60° Hooked Scissors 60° Hooked Scissors 60° Hooked Scissors
Left Swept Left Swept Left Swept Left Swept Left Swept Left Swept
Right Swept Right Swept Right Swept Right Swept Right Swept Right Swept
STINGRAY™ Punches STINGRAY Punches 20° Serrated Oval Punches STINGRAY Punches STINGRAY Punches
Oval Punches Oval Punches STINGRAY Punches Oval Punches Oval Punches
Oval Punches
Graspers Applications
PITBULL™ Loose Body Bucket Handle ACL Bone Block Assist
2.7 Cupped Tight Compartment Bucket Handle Flap Small, Loose Body
3.4 Cupped Bucket Handle Loose Body
Alligator Tight Compartment
Alligator Max Tight Compartment Bucket Handle
RAPTOR™ Rongeur Biopsy
Recommended Handheld Instrument Starter Kits

Comprehensive Set
SIMPLE SEVEN
Looking for the most utility with the least amount of investment; we suggest this
high performance seven-piece set.
ACUFEX™ Pro ACUFEX Loop

Handle REF Handle REF Description
7207057 012013 DUCKBILL™ Basket Punch, straight
7207050 012046 DUCKLING™ Basket Punch, curved left
7207051 012047 DUCKLING Basket Punch, curved right
7207672 012048 DUCKLING Basket Punch, upswept
7207058 012014 DUCKBILL Basket Punch, upbiter
7207052 012051 Narrowline Basket Punch, upbiter
011024 2.7 mm Alligator Max Grasper
FLEXIBLE FIFTEEN
Need a more comprehensive instrument set for increased functionality;
we suggest this fifteen-piece set.
ACUFEX Pro ACUFEX Loop

Handle REF Handle REF Description
N/A 010912 90˚ Rotary Basket Punch, 2.2 mm left
N/A 010913 90˚ Rotary Basket Punch, 2.2 mm right
7207055 012059 STINGRAY™ Basket Punch, left
7207054 012058 STINGRAY Basket Punch, right
7207057 012013 DUCKBILL Basket Punch, straight
7207050 012046 DUCKLING Basket Punch, curved left
7207051 012047 DUCKLING Basket Punch, curved right
7207672 012048 DUCKLING Basket Punch, upswept
012012 Scoop Basket Punch, 3.4 mm, straight
7207058 012014 DUCKBILL Basket Punch, upbiter
7207047 012036 Scissors Punch, straight
7207052 012051 Narrowline Basket Punch, upbiter
7207662 012201 Posterior, upbiter
011024 2.7 mm Alligator Max Grasper
7207061 011022 PITBULL™ Loose-body Forceps

Care and Maintenance

Cleaning, Lubrication and Resharpening/Preventive Maintenance
The shafts and tips of ACUFEX™ Instruments are of specially formulated and treated surgical
stainless steel for optimum sharpness and resistance to corrosion. However, correct care
and maintenance are important in optimizing the performance of your instruments. Please
use the information here to protect your investment.
Cleaning
Whenever possible, use demineralized, distilled water, when cleaning your instruments.
Mineral deposits and impurities in tap water can lead to corrosion. For washing, use a
detergent or solution pH (7.0 to 11.0) for safe cleaning. Ultrasonic cleaners may be used to
clean your instruments. After cleaning, dry the instruments to prevent water impurities from
collecting on surfaces. Replace the instruments in the ACUFEX Sterilization Trays between
uses to protect the instrument tips.
Lubrication
To protect instruments from staining and rusting prior to sterilization or storage, dip
instruments into a water-soluble antimicrobial lubricant, following manufacturer’s
instructions. The lubricant will help to free stiff instruments; if dipping does not free an
instrument, try soaking it overnight.
Resharpening/Preventative Maintenance
Instruments need to be inspected and evaluated on a regular basis to determine whether
resharpening, realignmentß or refurbishment is needed. Routine service will aid in promoting
proper function and performance. Only sharpening by Smith & Nephew can maintain and
restore the sharpness of the cutting blade or tip to our original manufacturing specifications.
Regular maintenance and the use of a Smith & Nephew facility for resharpening will increase
the life of the instruments.

ACUFLEX Catalogue

Uploaded by

Copyright:

Available Formats

ACUFLEX Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ACUFLEX Catalogue

Uploaded by

Copyright:

Available Formats

ACUFEX™ and

• Unrivaled strength, durability

• Designed with a broad range

• Preferred pinless hinge design

ACUFEX™ and ACUFEX Pro

ACUFEX Pro Handle Loop Handle

Cigar Handle ACUFEX Grasper Handle

Tip Selection Guide

Straight: Upbiter: Upswept: Left and Right:

ACUFEX™ and ACUFEX Pro

Narrowline Family DUCKBILL™ Family DUCKLING™ Family

Oval Punch Family Blunt Nose OVERBITER™ Punch

Posterior Family STINGRAY™ Punch Meniscal Elevator

Scoop Family – 1.0 mm Scoop Family – 1.3 mm Scoop Family – 1.5 mm

90° Rotary Straight Scissor Punch Upbiter Scissor Punch

ACUFEX™ and ACUFEX Pro

7207052 012051* Upbiter 1.9 mm 1.67 mm 2.89 mm

7207659 012055* Upswept 1.9 mm 1.67 mm 2.89 mm

Basket Punches – DUCKBILL™

7207058 012014* Upbiter 2.52 mm 3.17 mm 5.05 mm

ACUFEX™ and ACUFEX Pro

Basket Punches – Blunt Nose

Basket Punches – DUCKLING™

7207672 012048* Upswept 1.93 mm 3.17 mm 5.00 mm

ACUFEX™ and ACUFEX Pro

Basket Punches – STINGRAY™

Basket Punches – Scoop

ACUFEX Pro ACUFEX

Basket Punches – Scoop, extended length for hip procedures

ACUFEX™ and ACUFEX Pro

Basket Punches – Meniscal Elevator

Basket Punches – 90° Rotary

Loop Handle Cigar Handle

Basket Punches – 90° Rotary, extended length for hip procedures

7207544* 2.2 mm, right, extended length

2685 5.2 mm, straight

3196* 4.5 mm, 90° left

Call +1 800 343 5717 (U.S.) or contact your local representative.

ACUFEX™ and ACUFEX Pro

010812* 010802 60° hooked, left

010816* N/A 20° short, serrated, left

Meniscal OVERBITER™ Punch

ACUFEX™ and ACUFEX Pro

Graspers – Loosebody Forceps

7207731* N/A PITBULL Grasper, extended length

ACUFEX™ and ACUFEX Pro

N/A 011024* Alligator Max 3.17 mm 3.45 mm

N/A 014779* Cannulated Tissue Tensioner, straight

Extremity Arthroplasty Instruments

014844 Blunt Nose Jr. punch

Micro Instrument Punches (overall reduced tip size)

013219 Small joint graspers

Micro Instrument Graspers (overall reduced tip size)

Call +1 800 343 5717 (U.S.) or contact your local representative.

DYOVAC™ Suction Punches

Note: Suction Punch accessories can be found on page J-7.

3312 Hook Probe, 0.39"/1 mm

7207760 Probe, 3 mm extended length: 11.6"

3134236 Small Joint Probe

010610* Rosette - 3.0 mm straight, disposable† (5 per box)

• Unrivaled strength, durability

• Designed with a broad range