Scribd Logo
Upload

Welcome to Scribd!

  • 155 views

    GES-100 Solar Cell Trainer

    Uploaded by

    Rizqi Dino
    The GES-100 Solar Cell Trainer is designed to teach students about the basic configuration and characteristics of solar cells. It allows students to study the optical-to-electrical energy conversion process by adjusting irradiation levels and loads. The trainer includes modular components like solar cells, a dimmer, multimeter, energy storage, and loads to set up hands-on experiments and collect data on topics like I-V curves, open circuit voltage, short circuit current, and maximum power point of solar cells.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GES-100 Solar Cell Trainer

    Uploaded by

    Rizqi Dino
    155 views2 pages
    The GES-100 Solar Cell Trainer is designed to teach students about the basic configuration and characteristics of solar cells. It allows students to study the optical-to-electrical energy conversion process by adjusting irradiation levels and loads. The trainer includes modular components like solar cells, a dimmer, multimeter, energy storage, and loads to set up hands-on experiments and collect data on topics like I-V curves, open circuit voltage, short circuit current, and maximum power point of solar cells.

    Original Description:

    GES-100 Solar Cell Trainer

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The GES-100 Solar Cell Trainer is designed to teach students about the basic configuration and characteristics of solar cells. It allows students to study the optical-to-electrical energy conversion process by adjusting irradiation levels and loads. The trainer includes modular components like solar cells, a dimmer, multimeter, energy storage, and loads to set up hands-on experiments and collect data on topics like I-V curves, open circuit voltage, short circuit current, and maximum power point of solar cells.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    155 views2 pages

    GES-100 Solar Cell Trainer

    Uploaded by

    Rizqi Dino
    The GES-100 Solar Cell Trainer is designed to teach students about the basic configuration and characteristics of solar cells. It allows students to study the optical-to-electrical energy conversion process by adjusting irradiation levels and loads. The trainer includes modular components like solar cells, a dimmer, multimeter, energy storage, and loads to set up hands-on experiments and collect data on topics like I-V curves, open circuit voltage, short circuit current, and maximum power point of solar cells.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    R

    Solar Cell Trainer


    GES-100
    The GES-100 Solar Cell Trainer is a simple
    and self-contained trainer designed for learning
    the basic configuration and characteristics of a
    solar cell. Through the use of different
    irradiations and various load units, students
    study the optic-electro conversion of solar cells
    and plot the current-voltage characteristic and
    charging/discharging curves.

    uFeatures
    ● Self-contained solar cell trainer
    ● Modular design, easy of setup and storage
    ● Adjustable solar irradiation and azimuth of simulation sunlight
    ● DAQ equipped, easy to acquire and save the experimental data

    uSolar Cell Modules


    4 pcs of Monocrystalline Silicon Solar Cell 6*12 cm
    Each of unit solar cells:
    ● Open Circuit Voltage (Voc): 0.55V
    ● Short Circuit Current (Isc): 2.3A
    ● Maximum Load Voltage (Vpm): 0.5V
    ● Maximum Load Current (Ipm): 2.2A
    ● Maximum Power (Ppm): 1.1W
    ● Efficiency (Eff): 15%

    } Dimmer
    For adjusting the brightness of Halogen lamp:
    - Input voltage 110VAC or 220VAC
    - Output voltage 12V
    Light Source:
    - Halogen Lamp 12V/50W
    - Beam Angle 60°
    Simple Solar Power Meter:
    - Operating with DAQ
    2
    - Measuring range 10~1200W/m
    GES-100

    } Experiment Modules uOptional


    Digital Multimeter x2 Solar Power Meter
    - DC Voltage: 400mV, 4V, 40V, auto ranging; - Display: 3-1/2-digit LCD, Max Indication 1999
    Input Resistance ≥10M Ω 2 2
    - Measuring Range: 2000 W/m , 634 Btu/(ft x h)
    - AC Voltage: 400mV, 4V, 40V, auto ranging; - Resolution: 0.1 W/m 2, 0.1 Btu/(ft 2 x h)
    Input Resistance ≥10M Ω M - Accuracy: ±10 W/m 2, ±3 Btu/(ft 2 x h)
    - DC Current: 400 μ A , 400mA, 10A , pushbutton switch select - Sampling Rate: 2 Hz
    10A Range: 10A/250V fuse protected
    mA/ μ A Ranges: 0.5A/250V fuse protected
    uAccessories
    - AC Current: 400 μ A, 400mA,10A, pushbutton switch select
    AC power cord
    10A Range: 10A/250V fuse protected
    30 cm Test Lead x 10
    mA/ μ A Ranges: 0.5A/250V fuse protected
    25% Shading Plate x1, 50% Shading Plate x1
    - Resistance: 400 Ω, 4K Ω, 40K Ω, 4M Ω , 40M Ω auto ranging
    75% Shading Plate x1, 100% Shading Plate x1
    - Diode test: 0~1.5V
    - Continuity: Buzzer on for the measured resistance <30 Ω
    - Display: 3¾digit LCD, Maximum Indication 3999 uScope of Experiments
    1.Measuring the Irradiation of Different Light
    Sources
    } Energy Storage 2.Solar Cell as an Optic-Electro Converter
    Ni-MH Rechargeable Battery 1.2V/80mAh, 3.Solar Cell Diode Characteristics
    Ultra Capacitor 10F/2.7V 4.Measuring the Open Circuit Voltage of Solar
    Cell Shading Test
    } Load
    5.Measuring the Short Circuit Current of Solar
    DC Motor: 0.5V~6V/10mA
    Light Bulb: 1.1V Cell Shading Test
    Potentiometer: 100 Ω 10-turn 6.Testing the Open Circuit Voltage and Short
    Circuit Current of Solar Cell at Different
    Irradiations
    } Inverter
    7.Testing the Short Circuit Current of Solar Cell
    Input Voltage 2VDC, Modified Sine Wave Output
    1Vpp/60Hz and Square Wave Output 2Vpp/60Hz at Different Incidence Angles of Irradiation
    8.Solar Cells in Series Shading Test
    } Power Supply 9.Solar Cells in Parallel Shading Test
    Input Voltage 110/220VAC, 10.Measuring the I-V Characteristic Curve of
    Output Voltage 9VDC/1A for DMM use only
    Solar Cell
    } DAQ with Software 11.Measuring Maximum Power Point (MPP) of
    Channel 1 and 2: max. input voltage ±5V Solar Cell
    Channel 3 and 4: max. input current 1A 12.Simulating the Effect of Daylight from Sunrise
    to Sunset on Solar Cell
    } PC Requirements 13.Charging Battery and Capacitor with Solar Cell
    INTEL CPU P4 or better 14.Discharging Battery and Capacitor
    USB port equipped 15.Setting up a Solar Power System
    1GB of hard disk space 16.Measuring the Inverter Output
    CD-ROM drive
    Operating System Windows Vista/XP/2000

    K&H MFG. CO., LTD.


    5F, No. 8, Sec. 4 Tzu-Chiang Rd., Sanchong District,
    New Taipei City 24151, Taiwan R.O.C.
    http: //www.kandh.com.tw E-Mail :[email protected]
    Tel : 886-2-2286-0700 (Rep.) 886-2-2286-7786
    Fax : 886-2-2287-3066, 886-2-2287-9704

    You might also like