856979

806/847 MHz Duplexer

Applications
 For Band 20 LTE applications
 LTE Band 20 handsets, data cards, mobile routers

Product Features Functional Block Diagram

Top View
 Usable bandwidth 30 MHz (each band) Gnd Ant Gnd
 Low loss
7 6 5
 High attenuation
 High Tx-Rx isolation
Rx 8
 Single-ended-Balanced Rx operation 4 Gnd
Out
 Ceramic chip-scale Package (CSP)
 Small Size 2.5 x 2.00 x 0.56 mm
Rx
1 2 3
Out
 Hermetic RoHS compliant, Pb-free
Gnd Tx in
General Description Pin Configuration
Pin # SE-Balanced Description
856979 is a high-performance Temperature Compensated 1,8 Rx output
Surface Acoustic Wave (TC SAW) duplexer designed to 3 Tx input
meet the strict LTE requirements for use in Band 20. 6 Antenna/Phasing inductor
2,4,5,7,9 Ground
The 856979 is specifically designed to meet the high
performance expectations of insertion loss, isolation and
linearity in LTE systems operating in Band 20 applications
under all operating conditions. The use of TC SAW
technology enables stable performance over the entire
Ordering Information
temperature range.
Part No. Description
The 856979 uses common module packaging techniques to 856979 packaged part
achieve the industry standard 2.5 x 2.0 footprint. The 856979-EVB evaluation board
duplexer exhibits excellent power handling capabilities. Standard T/R size = 10,000 units/reel.

Data Sheet: Rev D 09/28/2012 - 1 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

TX – Electrical Specifications (1)

Specified Temperature Range: (2) -20 to +85 ºC
Parameter (3) Conditions Min Typical (4) Max Units
Ant-Tx Specification
Center Frequency - 847 - MHz
Maximum Insertion Loss (5) 832 – 862 MHz - 2.5 3.0 dB
Amplitude Variation(9) 832 – 862 MHz - 0.6 1.5 dB p-p
10 – 771 MHz 30 35 - dB
771 – 791 MHz 33 37 - dB
791 – 821 MHz 43 48 - dB
821 – 825 MHz 3 15 - dB
925 – 960 MHz 28 33 - dB
1565.420 – 1573.374 MHz 38 43 - dB
1573.374 – 1577.466 MHz 40 45 - dB
1577.466 – 1585.420 MHz 40 45 - dB
1597.5515 – 1605.886 MHz 43 48 - dB
Absolute Attenuation (6) 1664 - 1724 35 47 - dB
1805 – 1880 MHz 30 45 - dB
1884.5 – 1919.6 MHz 30 43 - dB
2110 – 2170 MHz 30 40 - dB
2400 – 2500 MHz 35 42 - dB
2500 – 2586 MHz 35 40 - dB
2586– 2620 35 40 - dB
2620– 2690 30 38 - dB
3328– 4310 20 31 - dB
4992– 6000 15 22 - dB
Return Loss at Tx 832 – 862 MHz 8 10 - dB
Return Loss at Antenna 832 – 862 MHz 8 10 - dB
Tx-Rx Specification
791 – 821 MHz (Differential) 50 53 - dB
832.5 – 862 MHz (Differential)(8) 54 56 - dB
791 – 821 MHz (Common-mode) 45 50 - dB
Isolation 832.5 – 862 MHz (Common-mode) 50 55 - dB
1574 – 1577 MHz 40 45 - dB
1664 – 1724 MHz 20 48 - dB
2496 – 2586 MHz 20 45 - dB
Tx Impedance (single-ended) (7) - 50 - 
Ant Impedance (single-ended)(7) - 50 - 
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Design goal is to meet 3.0 dB Max. Need SPC data to determine actual performance
6. Relative to zero dB
7. This is the optimum impedance in order to achieve the performance shown
8. Target minimum is based on future design revision goals
9. Over any 5 MHz in-band

Data Sheet: Rev D 09/28/2012 - 2 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

RX – Electrical Specifications (1)

Specified Temperature Range: (2) -20 to +85 ºC
Parameter (3) Conditions Min Typical (4) Max Units
Ant-Rx Specification
Center Frequency - 806 - MHz
Maximum Insertion Loss 791–821 MHz - 3.0 3.5 dB
Amplitude Variation(8) 791–821 MHz - 0.6 1.5 dB p-p
10 – 760 MHz 45 50 - dB
760 – 770 MHz 25 40 - dB
832 – 862 MHz 45 51 - dB
Absolute Attenuation (5) 862 – 890 MHz 40 44 - dB
890 – 910 MHz 35 40 - dB
910 – 2500 MHz 40 44 - dB
2500 – 6000 MHz 30 35 - dB
Return Loss at Rx 791–821 MHz 7.5 9 - dB
Return Loss at Antenna 791–821 MHz 8 9.5 - dB
Output phase balance 791–821 MHz -7.0 - 8.0 degree
Output amplitude balance(8) 791–821 MHz -2.3 - 0.5 dB
IM2 product (6) (a,b) - -106 -104 dBm
IM3 product (6) (c,d) - -101 -100 dBm
ANT Impedance (single-ended ) (7) - 50 - 
Rx Impedance (balanced) (7) - 100 - 

Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Relative to zero dB
6. All power levels are referenced to the antenna port. Two CW tones are applied at frequencies f1 and f2, and the resultant
intermodulation product in the Rx band is measured. The first tone is applied to the Tx port, in the range f1 = 832 to 862 MHz, at
+21.5 dBm (referenced to the antenna port). The second tone is -15 dBm, applied to the antenna port at f2, with the following four
cases:
a. f2 = 41 MHz
b. f2 = 2 * f1 - 41 MHz
c. f2 = f1 + 41 MHz
d. f2 = 3 * f1 - 41 MHz
The intermodulation product is measured at f1 - 41 MHz.
7. This is the optimum impedance in order to achieve the performance shown
8. Over any 5 MHz in-band

Data Sheet: Rev D 09/28/2012 - 3 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

Reference Design –Ant- 50 SE In, Tx-50 SE Out , Rx-100Bal Out

Schematic

RX
Balanced
ANT
Single-ended
TX
Single-ended

Notes:
1. Actual matching values may vary due to PCB layout and parasitic

PC Board Mounting Configuration

2.40
0.95
0.275
0.45

1.90
0.19x45°
CHAMFER

0.525 0.45
0.275

Notes: Notes:
Top, middle & bottom layers: 1 oz copper 1. All dimensions are in millimeters.
Substrates: FR4 dielectric, .031” thick 2. This footprint represents a recommendation only.
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick

Bill of Material
Reference Value Description Manufactur Part Number
Design er
L1_ANT 9.1 nH Chip inductor, Wire wound, 0402, ±2% MuRata LQW15AN9N1G00

L2 and L2 at Rx 4.3 nH Chip inductor, Wire-wound, 0402, ±3% MuRata LQW15AN4N3C00

Radiall USA
SMA N/A SMA connector 9602-1111-018
Inc.
PCB N/A 3-layer Multiple N/A

Data Sheet: Rev D 09/28/2012 - 4 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

Tx - Typical Performance (at room temperature)

Data Sheet: Rev D 09/28/2012 - 5 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

Rx -Typical Performance (at room temperature)

Data Sheet: Rev D 09/28/2012 - 6 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

TX – RX Isolation & Antenna RL Typical Performance (at room temperature)

Data Sheet: Rev D 09/28/2012 - 7 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

Mechanical Information
Package Information, Dimensions and Marking
Marking MFG site
code Package Style: CSP-10KT
Dimensions: 2.5 x 2.00 x 0.56 mm
EL M Body: Al2O3 ceramic
Date code
Lid: Kovar or Alloy 42, Au over Ni plated
WWY Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni
ID dot
plating

All dimensions shown are nominal in millimeters

0.56 NOM. All tolerances are ±0.15mm except overall length and width
0.60 MAX. ±0.10mm
2.50
2.35
The date code consists of: WW = 2 digit week,
Y = last digit of year, M = manufacturing site code
0.40

0.18x45°
2.00 CHAMF. 1.85

0.40

0.90

Tape and Reel Information

Standard T/R size = 10,000 units/reel. All dimensions are in millimeters
8.8
2.7 Ø330 ID dot 4.0
Ø 1.5 A 1.75
0.3 2.0

3.5 8.0
Direction of travel
2.75
Ø102
Ø20.2
2.0
Ø13.0 1.1 2.23 4.0 A
Ø 1.0
Section A-A

Absolute Maximum Ratings

Parameter Rating
Operating Temperature -20 to +90 oC
Storage Temperature -40 to +90 oC
Input Power(1) at TX +29 dBm
(1) 55oC equivalent 5000 hours. All ports matched to 50 Ohms.
Operation of this device outside the parameter ranges given above may cause permanent damage.

Data Sheet: Rev D 09/28/2012 - 8 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network
856979
806/847 MHz Duplexer

Product Compliance Information

ESD Information Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C

Refer to Soldering Profile for recommended guidelines.

ESD Rating: Class 0
Value: Passes ≤ 150 V This part is compliant with EU 2002/95/EC RoHS
Test: Human Body Model (HBM) directive (Restrictions on the Use of Certain Hazardous
Standard: JEDEC Standard JESD22-A114 Substances in Electrical and Electronic Equipment).

ESD Rating: Class N/A This product also has the following attributes:
Value: Passes ≤ 100 V  Halogen Free (Chlorine, Bromine)
Test: Machine Model (MM)  Antimony Free
Standard: JEDEC Standard JESD22-A115  TBBP-A (C15H12Br402) Free
 PFOS Free
MSL Rating  SVHC Free

Devices are Hermetic, therefore MSL is not applicable.

Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: [email protected] Fax: +1.407.886.7061

For technical questions and application information:

Email: [email protected]

Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.

Data Sheet: Rev D 09/28/2012 - 9 of 9 - Disclaimer: Subject to change without notice e

®
© 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network