Catalogo Mikrotik

Why MikroTik?
Reseller, trainer and consultant map
MikroTik provides routing, switching and wireless equipment

for all possible uses - from the customer location, up to high
end data centres.
We have an extensive network of trained consultants,

training centres and distributors in almost every country of
the world.
• Best price/performance
• Millions of RouterOS powered devices currently routing the
Established in Europe in 1996, we have 21 years of
experience in networking and wireless installations. world
• Twenty one years of developing networking software and
Our in-house developed RouterOS software now supports hardware
most common and many special features and we are • Over 70’000 RouterOS trained and certified network
constantly adding new customer requested features.
engineers
Build wireless links across seas, internet exchanges • More than 5000 training classes in the last year
between countries, and secure tunnels between banks. • World wide network of certified consultants
MikroTik can do it all. • Offering products that support simple CPEs to complex
enterprise networks
• Thousands of pages of documentation, examples,
application notes, and guides
Abo
5
mANTBox
The mANTBox is based on our new mANT sector antennas, but also has a wireless
router built right in. Powered by the RB921 device, the mANTBox comes ready to use
with everything included. The device uses a high speed 720MHz CPU and has a built in
802.11 ac/a/n wireless device with up to 31dBm output power.
Just like our mANT antennas, the mANTBox also comes in two sizes, a 15 dBi sector
unit and a 19 dBi sector unit.
The mANTBox 15s is compatible with the SXT type mount, so you can use it with our
durable and adjustable QuickMount systems. It comes with quickMOUNT PRO included.
The mANTBox 19s comes with metallic U bolt type mounts.
Model mANTBox 15s mANTBox 19s
19s
mANTBox
RB921GS-5HPacD-19S(International)
Product code RB921GS-5HPacD-15S
RB921GS-5HPacD-19S-US (USA)
CPU QCA9557 720MHz QCA9557 720MHz
Size of RAM 128MB DDR2 300Mhz 128MB DDR2 300Mhz
Data storage 128MB NAND 128MB NAND
10/100/1000 Ethernet ports 1 1
SFP cage 1 1
Wireless Built-in 5GHz 802.11ac, dual-chain Built-in 5GHz 802.11ac, dual-chain
PCB temperature monitor Yes Yes
Voltage monitor Yes Yes
Power input jack: 8-30V DC, PoE in: 8-30V DC jack: 8-30V DC, PoE in: 8-30V DC
Power consumption 13W 13W
LEDs 8 8
Beeper Yes Yes
Operating system MikroTik RouterOS, Level 4 license MikroTik RouterOS, Level 4 license
Antenna gain 15dbi 19dbi
5.17 - 5.825 GHz (International)
Frequency range 5.17 - 5.825GHz
5.17 - 5.25 GHz and 5.725 - 5.835 GHz (USA)
Polarization Vertical and horizontal Vertical and horizontal
3DB Beamwidth - azimuth 120deg 120deg
Wireless systems
3DB Beamwidth - elevation 10deg 5deg
VSWR 1.43 typ, 1.8 max 1.43 typ, 1.8 max
Port to Port isolation >40dB min >40dB min
Front-to-Back ratio >30dB >30dB
Cross Polarization >30dB >30dB
Package: 1.35Kg Package: 3.01Kg
Weight
Unit: 816g Unit: 1,36Kg
Dimensions 140x348x82mm 152x598x78mm
Device mANTBox 15s / mANTBox 19s

TX/RX at MCS0 30dBm / -96dBm
TX/RX at 6Mbit 31dBm / -96dBm
11
NetMetal 5
By supporting the 802.11ac wireless standard, the NetMetal allows to use datarates of
up to 1.3Gbps (for the T models), 256-QAM modulation and 20/40/80MHz channels.
With its huge speed improvements, 802.11ac opens up new possibilities.
The NetMetal is a completely new product in a waterproof enclosure. Its rugged design
is made to withstand the toughest conditions, but at the same time is easy to use and
can be opened and closed with one hand. The solid aluminium enclosure also works as
a reliable heatsink for its high output power radio.
RB922 models have miniPCI-e slot for another wireless card.
Product code RB921UAGS-5SHPacT-NM RB921UAGS-5SHPacD-NM RB922UAGS-5HPacT-NM RB922UAGS-5HPacD-NM

CPU QCA9557 720MHz network processor
Memory 128MB DDR2 onboard memory
Ethernet One Gigabit port with Auto-MDI/X
SFP 1x SFP cage available
Extras Beeper, signal and status LEDs, voltage and temperature sensors
Supported
20/40/80MHz
channels
USB 2.0 port, 1x MiniPCIe slot, SIM slot (requires 3g
Expansion USB 2.0 port
miniPCIe card)
Power input PoE in: 8-30V DC on Ether1 (Non 802.3af)
Consumption 23W 21W 23W 17W
Dimensions 143x247x48mm
Operating
-40°C .. +70°C tested
temperature
OS MikroTik RouterOS, Level 4 license, free product lifetime upgrdes
RB922/R921 outdoor unit, Power adapter 24V 1.2A, PoE injector, miniPCIe mounting screws, DIN rail mount, metal
Kit includes
monting ring, 2x plastic mounting loops
RB921UAGS-5SHPacT-NM RB921UAGS-5SHPacD-NM RB922UAGS-5HPacT-NM RB922UAGS-5HPacD-NM

Wireless QCA9880 5GHz 802.11ac QCA9882 5GHz 802.11ac QCA9880 5GHz 802.11ac QCA9882 5GHz802.11ac
Chains Triple chain Dual chain Triple chain Dual chain
Connector type RP-SMA Female (outside thread)
Connectors 3x 2x 3x 2x
Wireless systems
TX/RX at MCS0 33dBm / -96dBm 31dBm / -96dBm 32dBm / -96dBm 30dBm / -96dBm
TX/RX at 6Mbit 33dBm / -96dBm 31dBm / -96dBm 33dBm / -96dBm 31dBm / -96dBm
Frequency range 4920-6100 MHz, Operating range limited by Country Regulations
Poweradapter Mountingloops Metalring Gigabit PoEinjector DINmount miniPCIscrews
13
NetBox 5
The NetBox is a dual chain outdoor AP/CPE/Point-to-Point device with
RP-SMA connectors for antennas, and a cable hood for protection against
Poweradapter
moisture. This device supports the new 802.11ac standard for increased
wireless speed (866Mbit datarate, and 20/40/80MHz channels).
The case can be opened with one hand, and is protected against the
elements. Ethernet and a Grounding wire exits are provided on the bottom,
behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a separate DIN
rail mount is also provided. Package also includes a PoE injector and power
supply unit.
Product code RB911G-5HPacD

Memory 128MB DDR onboard memory
Wireless QCA9882 5GHz 802.11ac, 2x RP-SMA connectors, Dual chain
Supported channels 20/40/80MHz
Power input PoE in: 8-30V DC on Ether1 (Non 802.3af)
Power consumption 12W at 24V
Operating temperature -40°C .. +70°C tested
OS MikroTik RouterOS, Level 4 license
Netbox outdoor unit, PoE injector, mounting loop, DIN rail mount, monting ring,
Kit includes
power adapter 24V 0.8A
Wireless systems
TX power / RX sensitivity
Mountingloops Metalring TX/RX at MCS0 30dBm / -96dBm

GigabitPoEinjector DINmount
Using the optionally available Flexguide cable, you can

use the NetBox with any 3rd party antenna
15
DynaDish 5
The DynaDish 5 is a new Dual Chain 802.11ac outdoor device with an
integrated antenna. Compact in it’s design, it is a simple and completely
integrated product. The antenna is a 8 degree 25dBi dish, and it includes a
precise alignment mount, ideal for long range point to point wireless links.
• Ideal for long distance point-to-point links

• 5GHz dual chain board integrated into 25dBi dish antenna with 8 degree
beam width
• 720Mhz CPU
• One Gigabit Ethernet port
Model DynaDish 5
Product code RBDynaDishG-5HacD
CPU QCA9557 720MHz CPU
Memory 128MB RAM
Ethernet One 10/100/1000 Ethernet port
Wireless Built-in 5 GHz 802.11ac, dual-chain
Antenna VSRW 1.5; beamwidth h/v: 8°; gain: 25dBi; dual polarization
Port to port isolation 23db
Return loss < 15db
VSWR 1.5
Extras Beeper, PCB temperature monitor, voltage monitor
Power consumption 16W
LEDs 14 LEDs (6 user LEDs)
Power input 11V - 60V passive PoE or 802.3af/at with unshielded cable
Dimensions Ø 404mm, height 175mm (without mount)
Operating temp. -40°C .. +70°C tested
Wireless systems
Operating system MikroTik RouterOS, Level 3 license
Package contains DynaDish 5 unit, 24V 0.8A power adapter, precision mount, U kit, Gigabit PoE injector
Tx (dBm) Rx (dBm)
6Mbit/s 31 -96
54MBit/s 28 -81
MCS0 30 -96
MCS7 27 -77
MCS9 22 -72
Poweradapter Precisionmount UKit GigabitPoEinjector

17
QRT Series
High power integrated antenna
The QRT is a rugged outdoor flat panel antenna, with a built in

RouterBOARD. It has high output power wireless transmitter, and a Gigabit
Ethernet port.
Easy to use and quick to deploy, QRT is ideal for point to point links.
Three models are available:

• The QRT 5 comes with 5GHz 1000mW wireless and 24dBi antenna
• The QRT 2 comes with 2.4GHz 3200mW wireless and 17dBi antenna
• The QRT 5 ac supports 802.11ac for higher speed and 802.11a/n for
backwards compatibility.
Model QRT 5 QRT 2 QRT 5 ac

Product code RB911G-5HPnD-QRT RBQRTG-2SHPnD RB911G-5HPacD-QRT
Features 1 Ethernet, Gigabit, High power, Dual chain
QCA9557 720 MHz
CPU Atheros AR9342 600MHz network processor
network processor
Memory 64MB DDR onboard memory 128MB DDR2
Built in 5GHz 802.11a/n Built in 2GHz 802.11b/g/n Built in 5GHz 802.11ac
Wireless
(AR9342) (AR9342) (QCA9882)
Extras beeper, signal and status LEDs, voltage and temperature sensors
Power input PoE in: 8-30V DC on Ether1 (Non 802.3af).
Model QRT 5 QRT 2 QRT AC
Unit dimensions 309x320x50mm
Frequencies 4.9-5.875 GHz 2.3-2.6 GHz 4.9-5.875 GHz
Max consumption 11W at 24V 11.5W at 24V
Gain 24 dBi 17dBi 24 dBi
OS MikroTik RouterOS, Level 4 license (supports wireless CPE/PtP and AP mode)
VSWR 1.37 : 1 1.43 : 1 1.37 : 1
QRT wireless device, precision mounting bracket, U bolts, pole clamp, screw kit,
3 dB Beam-Width, H-Plane 10.5° 22° 10.5° Included
24V 0.8A power adapter, Gigabit PoE injector
Wireless systems
3 dB Beam-Width, E-Plane, typ. 10.5° 22° 10.5°
Polarization Dual, Vertical and horizontal
Port to Port Isolation -50 dB
Cross polarization, min -25 dB Wireless specifications
Front to Back Ratio, min 35 dB 30 dB 35 dB QRT 5 QRT 2 QRT 5 ac
TX/RX at MCS0 30dBm / -96dBm 35dBm / -96dBm 30dBm / -96dBm
TX/RX at MCS7 24dBm / -78dBm 30dBm / -78dBm 24dBm / -78dBm
TX/RX at 6Mbit 30dBm / -96dBm 35dBm / -96dBm 30dBm / -96dBm
TX/RX at 54Mbit 27dBm / -80dBm 31dBm / -80dBm 27dBm / -80dBm
Frequency range 4900-5920MHz 2300-2600MHz 4920-6100 MHz
Precisionmounting Ubolts Poleclamp Screwkit PoweradapterGigabitPoEinjector

bracket 19
LHG 5
The Light Head Grid (LHG) is a compact and light wireless device with an
integrated 24.5dBi grid antenna at a revolutionary price. It is perfect for point to
point links or for use as a CPE at longer distances.
The grid design ensures protection against wind, and the fact that the antenna
element is built into the wireless unit means no loss on cables.
The device comes disassembled for compact shipping, but is very easy to
assemble and includes a simple to use grounding attachment point. The
package also contains a small adapter for tilting the antenna five degrees from
the original position.
RBLHG-5nD (International)
Product code
RBLHG-5nD-US (USA)
CPU nominal frequency 600MHz
Size of RAM 64MB
Storage type Flash
Storage size 16MB
10/100 Ethernet ports 1
Wireless Built-in 5GHz 802.11a/n, dual-chain
Wireless chip model AR9344
International 5150 - 5875 MHz
Operating frequency 5170 - 5250 MHz
USA
5725 - 5835 MHz
Antenna gain 24.5 +/- 0.5dBi
Antenna beam width 7°
Cross polar 15dBi
Port to port isolation 20dB
Front to back ratio 25dB
Return loss 10dB
Wireless systems
VSWR 1.925:1
PoE in Yes
Supported input voltage 11V - 30V (passive PoE)
Wind survivability 205 km/h
Wind loading 186N @ 205km/h
Operating humidity 5 to 95% noncondensing
Shock and vibration ETSI300-019-1.4
ETSI specification EN 302 326 DN2
Dimensions Ø 391 x 222mm; package 450x450x145mm
Weight Unit: 560g; package: 1.98kg
Max power consumption 6W
24V0.38APoweradapter K-LHGkit 2xmetalrings PoEinjector

21
SXT ac series
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and
80MHz channels. 802.11ac opens up new possibilities and speeds never possible before.
The SXT ac is a new member in our 802.11ac product lineup, currently four models are available
— with regular 28 degree antenna (SXT ac), the SA model with a 90 wide beam-width sector
antenna, HG model with high gain 17dBi antenna and low-cost Lite model with 10/100Mbps
Ethernet port.
90° SXTac
All models are backwards compatible with 802.11a/n standard, Nstreme and Nv2 protocols and
are compatible with all legacy RouterBOARD devices.
• Up to 1300mW RF output
SXTSAac • Extended temperature range -40°C to +70°C
• Up to 540Mbps user data throughput
• Low latency Point to Point
Product code SXT 5 ac SXT SA5 ac SXT HG5 ac SXT Lite5 ac

Model RBSXTG-5HPacD RBSXTG-5HPacD-SA RBSXTG-5HPacD-HG RBSXT5HacD2n
CPU QCA9557 720MHz QCA9531 650 MHz
Memory 128MB DDR2 64MB
Ethernet 1x 10/100/1000 Ethernet 1x 10/100/Ethernet
Wireless Onboard dual-chain 5GHz 802.11ac; 10kV ESD protection on each RF port
Supported channels 20/40/80MHz 5*/10*/20/40/80MHz
Supported modes CPE, Point to Point, Point to Multipoint CPE, Point to Point
Additional Reset switch, beeper, USB 2.0 port, voltage and temperature monitors
LEDs Power LED, Ethernet LED, 5 wireless signal LED
PoE in 15-60V DC, Passive and 802.3af/at supported (Mode B. requires crossover cable)
Dimensions 140x140x56mm 140x140x105mm 140x140x56mm
Max consumption 12W 8W
MikroTikRouterOS,
Level 3 license
SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, power adapter,
Package contains
Wireless systems
passive PoE injector, quick setup guide
Certifications FCC, CE, ROHS
SXTHG5ac RBSXTG-5HPacD RBSXTG-5HPacD-SA RBSXTG-5HPacD-HG RBSXT5HacD2n

Dual pol. 24deg, 5GHz Dual pol. 28deg, 5GHz
Dual pol. 25deg, 5GHz Dual pol. 90deg, 5GHz
antenna, 17dBi gain, antenna, 16dBi gain,
Antenna antenna, 16dBi, -35 dB antenna, 13dBi, -35 dB
-30db port to port -30db port to port
port to port isolation port to port isolation
isolation isolation
Poweradapter Mountingring Polemounting PoEinjector *Supports only 802.11an protocol.

bracket 23
SXT 5
SXT is a low cost, high speed 5GHz weatherproof outdoor wireless device. Several
models are available.
Complete with a ready to mount enclosure and built-in antenna, SXT contains
everything you need to make a point to point link, or connect to an AP.
The Lite5 is low cost and very simple, perfect for CPE installations. SXT 5 has higher
power, and the HG model has an improved antenna and a Gigabit port. The SXT SA
model offers a completely different, wide beamwidth antenna for use as a sector.
Model SXT 5 SXT Lite5 SXT HG5 SXT SA5

Product code RBSXT5HPnDr2 RBSXT5nDr2 RBSXTG-5HPnD-HGr2 RBSXTG-5HPnD-SAr2
CPU AR9344 600MHz
SXT5/SXTLite5/SXTSA5 Memory 64MB DDR2
Ethernet 1x 10/100 Ethernet port 1x 10/100/1000 Gigabit Ethernet
Onboard dual chain 5GHz 802.11a/n Atheros AR9344 wireless module; 10kV ESD protection on each
Wireless cards
RF port.
Frequency range 4920-5920MHz (Limited by country regulatory rules)
Reset switch, beeper,
USB 2.0 port, voltage Reset switch, beeper, USB 2.0 port, voltage and
Extras Reset switch, beeper
and temperature temperature monitors
monitors
LEDs Power LED, Ethernet LED, 5 wireless signal LED
PoE in: 8-30V DC
PoE in: 8-30V DC PoE in: 8-30V DC PoE in: 8-30V DC
Packaged with 24VDC
Packaged with 24V DC Packaged with 24V DC Packaged with 24V DC
Power input 0.38A power adapter
0.8A power adapterand 0.8A power adapterand 0.8A power adapterand
and passive PoE
passive PoE injector passive PoE injector passive PoE injector
injector
Dimensions 140x140x56mm 140x140x105mm 140x140x56mm
Max consumption 11W at 24V 8W at 24V 11W at 24V 11W at 24V
OS MikroTik RouterOS, Level 3 license MikroTik RouterOS, Level 4 AP license
SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector (SXT
Package contains
5 and SXT Lite5), Gigabit PoE injector (for HG5 and SA5), power adapter, quick setup guide
Wireless systems
SXT 5 SXT Lite5 SXT HG5 SXT SA5
SXTHG5 TX/RX at MCS0 30dBm / -96dBm 27dBm / -95dBm 30dBm / -93dBm 30dBm / -95dBm
Dual pol. 24deg, 5GHz
Dual pol. 90 deg,
Dual pol. 25deg, 5GHz antenna, 16dBi, -35 dB antenna, 16.5dBi, -30
Antenna -35dB port to port
port to port isolation dB port to port isola-
isolation, 14dBi gain
tion, 1.43 VSWR
Poweradapter Mounting ring Polemountingbracket PoEinjector

25
SXT 2
SXT is a low cost, high speed 2GHz outdoor wireless device, now also
available as a high power Gigabit, or as a low cost Lite version. SXT
can be used for point to point links, as a CPE for point to multipoint
installations or even as an AP/Sector (SXT 2 model) because of it’s
wide beamwidth antenna.
Complete with a ready to mount enclosure and built-in 10dBi antenna,

60° the package contains everything you need to set it up in a matter of
minutes.
Model SXT 2 SXT Lite2

Product code RBSXTG2HnD RBSXT2nDr2
SXT 2
CPU AR9344 600MHz
Memory 64MB RAM
10/100/1000 (Gigabit) Ethernet port
Ethernet 10/100 Ethernet port
L2MTU frame size up to 4076
Wireless Onboard dual chain 2GHz 802.11b/g/n .10kV ESD protection on each RF port
Reset switch, beeper, voltage and
temperature monitors
SXT Lite2 LEDs Power LED, Ethernet LED, 5 wireless signal LED
Power input PoE in: 8-30V DC. Packaged with 24V PSU and passive PoE injector
Power
Up to 7W Up to 8W
consumption
License Level 4 license (CPE, PtP or AP as sector) Level 3 license (CPE or PtP modes)
SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE
Package
injector, 24V 0.8A power adapter (SXT 2), 24V 0.38A power adapter (SXT Lite2), quick
contains
setup guide
Wireless systems
SXT 2 SXT Lite2
Approximately 60° beamwidth in all polarizations
TX/RX at MCS0 32dBm / -95dBm 27dBm / -95dBm
TX/RX at 6Mbit 32dBm / -96dBm 27dBm / -95dBm
Dual polarization 2GHz antenna, 10dBi, -18 dB port to port isolation,
Antenna
Beam-Width: H-Plane, E-Plane typ. 60°
Poweradapter MountingringPolemountingbracketGigabitPoEinjectorGigabitPoEinjector
(SXT2) (SXTLite2) 27
SXT LTE
The SXT LTE (product code RBSXTLTE3-7) is a special variant of our
popular SXT device, and doesn’t include a 802.11 wireless device.
Instead, it has a built in high quality LTE Category 3 modem for speeds
of up to 100Mbit/s downlink and 50 Mbit/s uplink.
A perfect device for remote locations that are within cellular network
coverage. Due to it’s professional LTE chip and high gain antenna, it
can provide connectivity for your building even where cell phones can’t.
The signal LEDs show LTE signal level for easy positioning. The SXT
LTE supports the popular LTE/4G FDD bands 3 (1800MHz) and 7
(2600MHz), has a miniSIM slot, doesn’t support 2G/3G networks.
Model SXT LTE

Product code RBSXTLTE3-7
CPU AR7241 400MHz
Memory 64 MB RAM
Storage 128 MB NAND
Ethernet 10/100 Ethernet port
Wireless 3 (1800 MHz) and 7 (2600 MHz) LTE FDD bands, dual chain
Extras Reset switch, beeper, voltage and temperature monitors, 1x miniSIM (2FF)
Antenna gain 9 dBi
Power input PoE in: 8-30V DC. Packaged with 24V PSU and PoE injector
Wireless systems
Power
5W
consumption
Operating System RouterOS, Level 3 license
24V0.8ApoweradapterMountingring PoEinjector
29
SEXTANT G
Outdoor point to point solution
The SEXTANT is a 18dBi 5GHz antenna with a built in RB911 router. It

has two polarizations to give you all benefits of 2x2 MIMO in 802.11n.
Inside is the high power RB911 dual chain wireless device with high
performance, high output power wireless transmitter. It has a Gigabit
Ethernet port, to fully utilise the benefit of 802.11n high speed wireless.
Easy to use and quick to deploy, SEXTANT is ideal for point to point
links.
Product code RBSEXTANTG5HPnD

Features 1 Ethernet, Gigabit, High power, Dual chain
Data storage onboard NAND memory chip
Wireless Built in 5GHz 802.11a/n, 2x MMCX connectors
Extras beeper, signal and status LEDs, voltage and temperature sensors
Dimensions Ø250mm, height 90mm
Max consumption 11W at 24V
OS MikroTik RouterOS, Level 3 license (supports wireless CPE/PtP mode)
SEXTANT antenna, 24V 0.8A power adapter, mounting rings, pole mounting bracket,
Frequencies 5.17 - 5.825 GHz Included
Gigabit PoE injector
Wireless systems
Gain 18dBi
VSWR 1.6:1
3 dB Beam-Width, H-Plane 16.8 °
3 dB Beam-Width, E-Plane, typ. 22.8 ° TX power / RX sensitivity
Polarization Linear, Vertical and Horizontal TX/RX at MCS0 30dBm / -96dBm
Port to Port Isolation - 35 dB TX/RX at MCS7 24dBm / -78dBm
Frequency range 4900-5920MHz
Poweradapter MountingringsPolemountingbracketGigabitPoEinjector
31
Metal
Completely waterproof, rugged, and super high powered. The serious outdoor wireless
device. Fully sealed, industrial design metal case, powered by RouterBOARD and
SHPn
Metal5
RouterOS.
It has a built-in N-male connector, and pole attachment points, so you can attach it to
an antenna directly, or use a standard antenna cable. LED signal indicators make it
easy to install and align.
Shipped complete with power injector, adapter (US type only for 9HPn model) and
mounting kit. Available in three versions - 900MHz, 2GHz and 5GHz.
Metal 9HPn is compatable only with another Metal 9HPn. It will not work with any other
900MHz manufacturer product.
Product code RBMetal9HPn RBMetal2SHPn RBMetal5SHPn

Memory 64MB DDR SDRAM onboard memory
Ethernet One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU up to 2030
Wireless Built-in 900MHz Wireless Built-in 2 GHz Wireless Built-in 5 GHz
Wireless 1x1 MIMO, N-male 1x1 MIMO, N-male 1x1 MIMO, N-male
connector connector connector
Extras Reset switch, Beeper, Voltage monitor, Temperature monitor
LEDs 5 wireless signal LEDs, ethernet activity LED (configurable)
Power input Passive 8-30V PoE in only. 16KV ESD protection on RF port
Consumption Up to ~0,5A at 24V (11.5W)
Dimensions 215x60x38mm. Must be mounted with ethernet pointing down.
Operating system MikroTik RouterOS Level 4 license (station, point-to-point or AP modes)
Metal unit, mounting loops, PoE injector, angled N connector, 6dBi onmi antenna
Package contains
(only for 2SHPn model), mounting rings, 24V 0.8A power adapter.
Wireless systems
802.11a: –93 dBm @ 6Mbps to -77 dBm @ 54 Mbps
5SHPn model
802.11n: –93 dBm @ MCS0 to –71 dBm @ MCS7
RX sensitivity 802.11b/g: –93 dBm @ 6Mbps to -77 dBm @ 54 Mbps
2SHPn model
802.11n: –92 dBm @ MCS0 to -72 dBm @ MCS7 40MHz
9HPn model 900MHz: -93dBm @ 11Mbps -75 dBm @ 54 Mbps
802.11a: 31dBm @ 6Mbps to 27dBm @ 54 Mbps
5SHPn model
802.11n: 30dBm @ MCS0 to 26dBm @ MCS7
TX power 802.11b/g: 32dBm @ 1-11/6Mbps to 29dBm @ 54 Mbps
2SHPn model
9HPn model 900Mhz: 27 dBm @ 11Mbps to 24dBm @ 54 Mbps
Poweradapter 2xMountingloops PoEinjector Angled Nconnector 6dBiomniantenna 2xMetalrings

(only for 2SHPnmodel) 33
Metal 52 ac
The Metal is a completely waterproof and rugged outdoor wireless device with a super
high output power.
Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band
(2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you
utilize the full benefit of 802.11ac high speed wireless.
The Metal 52 ac supports 2.4GHz, 5GHz and all the legacy wireless modes as well
(802.11 b/g/n for 2.4GHz and 802.11 ac/n/a for 5GHz).
Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS.
With 1300mW of output power - to reach the last mile, in any conditions. The Metal
comes with an AP software license, so you can attach your favorite antenna to use it
as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer!
The Metal 52 ac includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi
2.4GHz, 8dBi 5GHz), so you can use the unit right out of the box, or use your own
antenna.
RBMetalG-52SHPacn (International)
Product code
RBMetalG-52SHPacn-US (USA)
CPU QCA9556 720MHz
Size of RAM 64MB
Memory type Flash
Memory size 16MB
10/100/1000 Ethernet ports 1
Wireless 5GHz 2.4GHz
International 5150 - 5875 MHz International 2412 - 2484 MHz
Operating frequency 5170 - 5250 MHz
USA USA 2412 - 2462 MHz
5725 - 5835 MHz
Protocols 802.11a/n/ac 802.11b/g/n
Wireless systems
Chains Single-chain
Wireless chip QCA9889
PoE in Yes
Supported input voltage 10 - 30V
PCB temperature monitor Yes
Voltage monitor Yes
License level 4
Operating System RouterOS
Weight Package: 778g; Unit: 300g
Poweradapter 2xMountingloopsGigabitPoEinjectorAngledNconnectorDualBand2.4/5Ghz 2xMetalrings

(6dBi 2.4Ghz,8dBi 35
5GHz)
Groove
2GHz / 5GHz outdoor unit
Our smallest outdoor series model - a fully featured wireless

RouterBOARD powered by RouterOS. Weatherproof, durable and
ready to use. It has one 10/100 Ethernet port with PoE support and a
built in wireless radio. It has software selectable 2 or 5GHz wireless
mode, and high 500mW output power!
With the Nv2 TDMA technology, up to 125Mbit aggregate throughput

is possible! It has a built-in N-male connector, and pole attachment
points, so you can attach it to an antenna directly, or use a standard
antenna cable. LED signal indicators make it easy to install and align.
CPE or AP versions are available. Groove runs RouterOS with all it’s
features.
CPU AR9342 600Mhz

Memory 64MB
Ethernet One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU up to 2030
Wireless 5 or 2GHz (software selectable) radio, N-male antenna connector
Passive 9-30V PoE in only. 16KV ESD protection on RF port. Up to 0,19A at 24V
Power input
(4.56W)
Dimensions 177x44x44mm. Must be mounted with ethernet pointing down
52HPn: Level 3 license (station or ptp),
RouterOS
A-52HPn: Level 4 license (AP, station or ptp)
Groove unit, mounting loops, PoE injector, 24V 0.8A power adapter, 2.4/5 GHz Omni
Wireless systems
Package contains
antenna (only for Groove A model)
5GHz 2GHz
–93 dBm @ 6Mbps to -77 dBm –93 dBm @ 6Mbps to -77 dBm
RX sensitivity 802.11a
@ 54 Mbps @ 54 Mbps
–93 dBm @ MCS0 20MHz to –76 dBm –93 dBm @ MCS0 20MHz to –76 dBm
RX sensitivity 802.11n
@ MCS7 40MHz @ MCS7 40MHz
TX power 802.11a 27dBm @ 6Mbps to 22Bm @ 54 Mbps 27dBm @ 6Mbps to 24Bm @ 54 Mbps
TX power 802.11n 26dBm @ MCS0 to 22dBm @ MCS7 27dBm @ MCS0 to 23dBm @ MCS7
Frequency range 4900-5920MHz 2400MHz-2500MHz
Omniantenna Poweradapter Mountingloops PoEinjector

(GrooveA) 37
Groove 52 ac
2.4GHz / 5GHz outdoor unit
Our smallest outdoor series model - a fully featured wireless RouterBOARD

powered by RouterOS.
Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit
Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz
wide channel). The new Gigabit port will help you utilise the full benefit of
802.11ac high speed wireless.
The Groove A (AP model) comes with Level 4 license and includes a Dual
Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz), so you
can use the unit right out of the box, or use your own antenna.
The Groove (CPE) model comes with level 3 license for CPE or backbone
installations.
RBGrooveGA-52HPacn
Product code
RBGrooveG-52HPacn
CPU QCA9556 720MHz
Memory 64MB
Ethernet One 10/100/1000 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU up to 2030
5GHz (802.11ac) or 2.4GHz (802.11b/g/n) (software selectable) radio,
Wireless
N-male antenna connector
Passive 11-30V PoE in only. 16KV ESD protection on RF port. Up to 0,19A at 24V
Power input
(4.56W)
Dimensions 177x44x44mm. Must be mounted with ethernet pointing down
Wireless systems
Level 4 license (RBGrooveGA version)
RouterOS
Level 3 licence (RBGrooveG version)
Groove unit, mounting loops, Gigabit PoE injector, 24V 0.38A power adapter, 2.4/5 GHz
Package contains
Omni antenna (only for Groove A model)
Rate (2.4 GHz) Tx (dBm) Rx (dBm) Rate (5 GHz) Tx (dBm) Rx (dBm)

1MBit/s 24 -97 6MBit/s 26 -93
11MBit/s 21 -91 54MBit/s 21 -78
6MBit/s 24 -93 MCS0 26 -93
54MBit/s 21 -77 MCS7 21 -74
MCS0 24 -93 MCS9 19 -69
MCS7 20 -72
Omniantenna Poweradapter Mountingloops GigabitPoEinjector

(GrooveA) 39
BaseBox
The BaseBox in an outdoor wireless device, based on our popular
RB912 model, fitted with two SMA connectors for antennas, and a
cable hood for protection against moisture. Also available are three
additional places for antenna connectors, in case you wish to use the
BaseBox miniPCIe slot for one more wireless interface to make a dual
band device, or a 3G/4G modem.
The case can be opened with one hand, and is protected against the
elements. USB, Ethernet and a Grounding wire exits are provided
on the bottom, behind a protective door. Two models are available -
BaseBox 2 and BaseBox 5 (2 or 5GHz wireless, respectively).
Comes with a mounting loop for tower/pole mounting, and a separate

Rendered image shows internals of DIN rail mount is also provided. Package also includes a PoE injector
BaseBox with optional second wireless card and power supply unit.
Model BaseBox 5 BaseBox 2

Order code RB912UAG-5HPnD-OUT RB912UAG-2HPnD-OUT
1 Ethernet, 1 miniPCIe, USB, Additional memory,
Features
Gigabit, High power, Dual chain, Outdoor case
Built in 5GHz 802.11a/n, Built in 2GHz 802.11b/g/n,
Wireless
2x RP-SMA connectors 2x RP-SMA connectors
beeper, signal and status LEDs, SIM slot (requires 3g miniPCIe card),
Extras
voltage and temperature sensors
Wireless systems
Expansion miniPCIe slot for 802.11 or 3G (using 3G disables the USB port), USB 2.0 port
Power input PoE in: 8-30V DC on Ether1 (Non 802.3af). Consumption: 14W at 24V
Poweradapter Mountingloops Metalring Dimensions 246x135x50mm
OS MikroTik RouterOS, Level 4 license (supports wireless AP mode)
RB912 outdoor unit, 24V 0.8A power adapter, PoE injector, mounting loop, DIN rail mount,
Kit includes
monting ring
RB912UAG-5HPnD-OUT RB912UAG-2HPnD-OUT
GigabitPoEinjector DINmount TX/RX at MCS7 24dBm / -78dBm 24dBm / -78dBm
Using the optionally available Flexguide cable, you can TX/RX at 54Mbit 27dBm / -80dBm 27dBm / -80dBm
use the Basebox with any 3rd party antenna Frequency range 4900-5920MHz 2400MHz-2500MHz
41
OmniTik
OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas -
the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard
device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet
ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports
Nv2 TDMA technology with up to 200Mbit aggregate throughput.
LED signal indicators on it’s back are fully customizable, show Ethernet
activity or wireless signal - or any other information from RouterOS. The USB
port gives the ability to connect a 3G modem or a storage drive.
The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5
can power other PoE capable devices with the same voltage as applied to the
unit. Less power adapters to worry about.
Model OmniTIK U-5HnD OmniTIK UPA-5HnD

Memory 64MB DDR2 onboard memory 128MB DDR2 onboard memory
Ethernet Five 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU up to 2030
Wireless Wireless Built-in 5GHz 802.11a/n 2x2 MIMO
Antenna Two 7.5dBi (+/-1dBi) omni with different polarities (ch0 horizontal, ch1 vertical)
Extras Reset switch, Beeper, USB 2.0 port, Voltage monitor, Temperature monitor
LEDs 5 programmable LEDs (Ethernetactivity by default), one power LED
Power input Passive 11-30V PoE in only. 16KV ESD protection on RF port
Operating system MikroTik RouterOS, Level 4 license MikroTik RouterOS, Level 5 license
OmniTIK unit, mounting bracket, hose clamp, PoE injector, 24V 0.8A PSU (U-5HnD),
Package contains
24V 2.5A PSU (UPA-5HnD),
OmniTIK UPA-5HnD
Wireless systems
Power Output Supports PoE output on ports 2-5. Max current 1A per port, 2A total
802.11a: –96 dBm @ 6Mbps to -78 dBm @ 54 Mbps

RX sensitivity
802.11n: –96 dBm @ MCS0 to –75 dBm @ MCS7
802.11a: 30dBm @ 6Mbps to 27dBm @ 54 Mbps
TX power
OFDM: BPSK, QPSK, 16 QAM, 64QAM
Modulations
DSSS: DBPSK, DQPSK, CCK
Poweradapter Mountingbracket Metalring PoEinjector

43
OmniTik 5 ac
OmniTik 5 ac features five Gigabit Ethernet ports and support for 802.11ac. It’s
equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW
802.11a/n/ac Dual Chain wireless (support for AC as well as backwards
compatible with regular 802.11a/n CPE) and comes with a new design
weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a
power supply, a PoE injector and a mounting kit.
OmniTik 5 PoE ac includes all features listed above and additionally supports
passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports
2-5 can power other PoE capable devices with the same voltage as applied
to the unit. Less power adapters and cables to worry about! It can power 48V
devices (like IP camera), if 48V input is used.
RBOmniTikG-5HacD (International) RBOmniTikPG-5HacD (International)

Product code
RBOmniTikG-5HacD-US (USA) RBOmniTikPG-5HacD-US (USA)
CPU QCA9557 720MHz
Memory 128MB
Storage type Flash 16MB
Ethernet Five 10/100/1000 Mbit/s Gigabit Ethernet port with Auto-MDI/X
Wireless QCA9892, wireless built-in 5 GHz 802.11ac, dual chain
International: 5150 MHz-5875 MHz
Frequency range
USA: 5170-5250 MHz; 5725-5835 MHz
Power options PoE input, passive 12-57V
PoE out - Yes, Ether2 - Ether5
1A (if input < 30V)
Max output per port -
0.5A (if input > 30V)
Consumption 14W 18W
Antenna gain 7.5dBi
USB 1x USB type A
Wireless systems
Dimensions 416x129x58 mm
LEDs 10x LEDs
License level 4
Operating system RouterOS
Rate Tx (dBm) Rx (dBm)

6MBit/s 31 -96
54MBit/s 27 -81
MCS0 30 -96
MCS7 27 -77
MCS9 22 -72
28V2.57Aadapter 24V0.8AAdapter Polemountbracket Metalring GigabitPoE IECcord

(PoEversion) (NonPoEversion) injector (PoEversion) 45
LDF 5
The LDF (Lite dish feed) is an outdoor wireless system with a built in antenna,
meant to be installed on satellite offset dish antennas. The dish will act as a
reflector, amplifying the signal.
This means you can use any available satellite TV dish with an offset mount
to quickly deploy powerful long range wireless links. The offset mount is
universal at 40mm diameter, and the LDF can easily be placed inside it.
Since the LDF itself is a tiny little package, it makes shipping and deployment
simple and low cost.
Using a dish of up to 100cm in diameter, it is possible to obtain antenna

amplification of up to 33dBi. The device comes preinstalled with RouterOS
and is ready to use.
RBLDF-5nD (International)
Product code
RBLDF-5nD-US (USA)
CPU AR9344 600MHz
Memory 64MB
Storage type Flash
Storage size 16MB
Ethernet One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X
Wireless AR9344, wireless built-in 5 GHz 802.11a/n, dual chain
International: 5150MHz-5875MHz
Frequency range
USA: 5170-5250MHz; 5725-5835MHz
Power options Passive PoE input 10-28V
Consumption 6W
Internal antenna gain 9dBi
Wireless systems
LEDs 8x LEDs (6x user LEDs)
License level 3
Rate Tx (dBm) Rx (dBm)

6MBit/s 25 -96
54MBit/s 20 -80
MCS0 25 -96
MCS7 19 -75
24V0.38AAdapter PoEinjector
47
Disc Lite5
We are glad to introduce a new high gain 5GHz CPE. By using a unique and
innovative short backfire antenna design, we were able to achieve 21dBi
antenna gain in a compact and easy to deploy package.
DISC Lite5 is based on our popular LHG hardware design and is equipped
with 21dBi dual chain 802.11n integrated CPE with 600MHz CPU, 64MB
RAM, 1x 10/100Mbps Ethernet port and RouterOS L3 installed. It comes
complete with a power supply, PoE injector and mounting ring. The device is
also compatible with our SXT mounting systems, including the quickMount
series.
The RouterOS Level3 allows to use the DISC Lite5 as a CPE or for 5GHz
Point-to-Point links.
DISC Lite5 (International)

Product code
DISC Lite5 US (USA)
CPU AR9344 600MHz
Memory 64MB
Storage type Flash
Storage size 16MB
Wireless AR9344, wireless built-in 5 GHz 802.11a/n, dual chain
International: 5150MHz-5875MHz
Frequency range
USA: 5170-5250MHz; 5725-5835MHz
Power options Passive PoE input 11-30V
Consumption 6W
Antenna gain 21dBi
Dimensions ⌀ 265mm, height: 80mm
Wireless systems
LEDs 8x LEDs (6x user LEDs)
License level 3
Rate Tx (dBm) Rx (dBm) Antenna type Short backfire

6MBit/s 25 -96 Antenna gain 21 dBi
54MBit/s 20 -80 Port-to-port isolation 20 dB
MCS0 25 -96 Front-to-back ratio 30 dB
MCS7 19 -75 Side lobe level 15 dB
24V0.38AAdapter PoEinjector Metalring

49
Cloud Router Switch
CRS 8 Ethernet port series

The CRS series combine the best features of a fully functional router and a Layer
3 switch, is powered by the familiar RouterOS. All the specific Switch configuration
options are available in a special Switch menu, but if you want, ports can be removed
from the switch configuration, and used for routing purposes.
These 8 Ethernet port devices share the same form factor, but each comes with slight-
ly different port set and features.
Product code CRS109-8G-1S-2HnD-IN CRS210-8G-2S+IN CRS112-8G-4S-IN

Qualcomm Atheros AR9344
CPU QCA8519-AC2C 400 MHz QCA8511-AL1C 400 MHz
600MHz
Memory 128MB 64MB 128MB
CRS109-8G-1S-2HnD-IN Ethernet 8x 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X
One 1G Ethernet SFP cage, 2x 10G SFP+ cage, DDMI 4x 1G Ethernet SFP cage,
SFP
DDMI support. support. DDMI support.
Serial port One RJ45 serial port
Reset switch; beeper; Reset switch; beeper;
voltage and temperature voltage and temperature Reset switch; voltage and
Extras
monitoring, touchscreen monitoring, touchscreen temperature monitoring
LCD, microUSB LCD
Power input 10-57V, 24V 0.8A PSU included, PoE in: 10-57V on Ether1
Power
13W
consumption
Case dimensions 200x144x47mm
CRS210-8G-2S+IN Operating temp. -20°C .. +70°C tested

2x built in 4dBi swivel
Antennas -
antennas
OS MikroTik RouterOS v6, Level 5 license
CRS switch, 24V 0.8A
CRS switch, 24V 0.8A
power adapter, microUSB CRS switch, 24V 0.8A
Included power adapter, rackmount
type B to USB type A power adapter
ears
adapter
CRS109-8G-1S-2HnD-IN wireless specifications

Datarate TX power dBm RX sensitivity
1MBit/s 29 -97
CRS112-8G-4S-IN
Switches
11MBit/s 28 -90
6MBit/s 30 -96
54MBit/s 25 -76
MCS0 30 -96
MCS7 23 -73
Poweradapter microUSBcable Rackmountears

51
Cloud Router Switch
CRS 24 port series

Cloud Router Switch is our new Smart Switch series. It combines the best
features of a fully functional router and a Layer 3 switch, is powered by the
familiar RouterOS. All the specific Switch configuration options are available in
a special Switch menu, but if you want, ports can be removed from the switch
configuration, and used for routing purposes.
Four models are available:

• RM models come with 1U rackmount case
• IN with desktop case
CRS125-24G-1S-2HnD-IN • 2HnD have a 2.4GHz Dual-chain wireless
• 226 series supports SFP+ 10G.
Model CRS125-24G-1S CRS226-24G-2S+

Case type IN, RM 2HnD-IN RM
CPU Qualcomm Atheros AR9344 600MHz Qualcomm Atheros QCA8519 400 MHz
Memory 128MB 64MB
Ethernet 24x 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X
CRS125-24G-1S-IN Wireless AP - 802.11b/g/n built in -

First port supports 1.25G/10G modules,
One 1.25G Ethernet SFP cage (Mini-
second port only 10G modules. SFP+
SFP GBIC; SFP module not included),DDMI
port supports only modules up to 10KM
support
LR (long reach), DDMI support
Expansion microUSB port -
Storage 128MB Onboard NAND with multiple OS partition support
Extras Reset switch, beeper, voltage and temperature monitoring, touchscreen LCD
8-28V, 24V 0.8A
CRS125-24G-1S-RM Power input PSU included, PoE
in: 8-30V on Ether1
8-28V, 24V 1.2A PSU included, PoE in: 8-30V on Ether1
Case dimensions 285x145x45mm (IN models), 443x145x45mm (RM models)

CRS switch, power adapter and USB

Included CRS switch, power adapter
OTG cable (for 4G dongle or USB drive)
CRS226-24G-2S+RM
Switches
CRS125-24G-1S-2HnD-IN wireless specifications
Antennas 2x built in 4dBi swivel antennas
802.11g: -96dBm @ 6Mbit/s to -80dBm @ 54Mbit/s
RX sensitivity
802.11n: -96dBm @ MCS0 to -78dBm @ MCS7
TX power 802.11g: 30dBm @ 6Mbps to 25dBm @ 54 Mbps
Modulations
Poweradapter USBcable
53
Cloud Router Switch
CRS212-1G-10S-1S+IN
Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost”
member of our CRS series. It comes with one Gigabit Ethernet RJ45
port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel
and serial port (RJ45). Product includes indoor desktop case and
power supply.
Our CRS series combines the best features of a fully functional

router and a Layer 3 switch, is powered by the familiar RouterOS.
All the specific Switch configuration options are available in a special
Switch menu, but if you want, ports can be removed from the switch
configuration, and used for routing purposes.
CPU Qualcomm Atheros 8519 400MHz

Memory DDR2 64MB
1x 10G SFP+ cage, 10x SFP cages (Mini-GBIC; SFP+ module not included),
SFP
DDMI support.
Storage 16MB Flash
Extras Reset switch; beeper; voltage and temperature monitoring, touchscreen LCD
Power input 8-30V, 24V 1.2A PSU included
Case dimensions 200x144x47mm
Included CRS switch, 24V 1.2A power adapter, rackmount ears
Switches
Poweradapter Rackmountears
55
CSS326-24G-2S+RM
SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire
speed connectivity with several new switching features.
The device is powered by a Marvell DX switch chip. The device is running an

operating system designed specifically for MikroTik switch products - SwOS.
SwOS is configurable from your web browser. It gives you all the basic
functionality for a managed switch, plus more: allows to manage port-to-port
forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth
limitation and even adjust some MAC and IP header fields. SFP cage
supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
• Non-blocking Layer 2 switching capacity

• 16K host table
• IEEE 802.1Q VLAN
• Supports up to 4K simultaneous VLANs
• Port isolation
• Port security
• Broadcast storm control
• Port mirroring of ingress/egress traffic
• Rapid Spanning Tree Protocol
• Access Control List
• MikroTik neighbor discovery
• SNMP v1
• Web-based GUI
Product code CSS326-24G-2S+RM

Switch chip model 98DX3216A1
Storage type Flash
Storage size 2MB
10/100/1000 Ethernet ports 24
SFP+ cages 2
Operating system SwOS
Supported input voltage 12 - 30V (jack or passive PoE)
Switches
Serial port RJ45
24V1.2Apower Rackmountears
adapter 57
CRS106-1C-5S
The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped
with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages.
The package includes a power supply. Powered by a 400MHz CPU and
128MB RAM, it runs RouterOS with a L5 license and supports 11-30V power.
At $59 price range this product provides a market leading solution for
connecting up to six SFP devices.
Product code CRS106-1C-5S

CPU QCA8511 400 MHz
Size of RAM 128 MB
Storage type Flash
Storage size 16 MB
5x 1.25G Ethernet SFP cage (Mini-GBIC; SFP module not included), DDMI
SFP
support
Combo port 1 (Gigabit Ethernet / SFP)
PoE in Yes
Dimensions 114 x 137 x 29mm
License level 5
Operating System RouterOS
Max Power consumption 11 W
LEDs 9x LEDs (1x user LED)
Serial port RJ45
Switches
24V0.8Apoweradapter
59
RB260GS series
The RB260GS is a small SOHO switch. Two models are available, the
RB260GS, and the RB260GSP, which features power output on it’s
ethernet ports. Ports 2-5 can power other PoE capable devices with the
same voltage as applied to the unit.
Both devices have five Gigabit Ethernet ports and one SFP cage,
switching is done by an Atheros Switch Chip.
The devices are running an operating system designed specifically for

MikroTik Switch products - SwOS.
SwOS is configurable from your web browser. It gives you all the basic
functionality for a managed switch, plus more: Allows to manage port-
to-port forwarding, apply MAC filter, configure VLANs, mirror traffic,
apply bandwidth limitation and even adjust some MAC and IP header
fields.
Tested and recommended to use with MikroTik SFP modules:

S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
CPU Taifatech TF470

Memory Embedded 96K SRAM
Ethernet Five 10/100/1000 Ethernet ports, Atheros switch AR8327
RB260GSP only: Passive PoE output on ports 2-5.
PoE output
Max current 1A per port, 2A total current limit
One fixed Gigabit Ethernet SFP cage with DDMI support
SFP
(Mini-GBIC; SFP module not included)
Serial port No serial port
LEDs Power, NAND activity, 5 Ethernet activity LEDs
Extras Hardware watchdog
Power input PoE in: 8-30V DC on Ether1 (Non 802.3af). Jack: 8-30V DC
Switches
Power consumption Up to 6W
Poweradapter
Operating System MikroTik SwOS
Included RB switch, power adapter
61
hEX
The hEX is a small five port ethernet router in a nice plastic case.
Not only this is an attractive looking tiny SOHO unit, its price is lower
than the RouterOS license alone - there simply is no choice when it
comes to managing your wired home network, the hEX has it all.
You have a choice between the hEX lite with 10/100Mbit ports, the hEX
PoE lite with 10/100Mbit ports and PoE-out, hEX, which has Gigabit
Ethernet ports, and hEX PoE with Gigabit ports, PoE-out and SFP
cage.
Model hEX hEX lite hEX PoE lite hEX PoE

Product code RB750Gr3 RB750r2 RB750UPr2 RB960PGS
CPU MT7621A 880MHz QCA9531 850MHz QCA9531 650 MHz QCA9557 800 MHz
RAM 256MB 64MB 128 MB
Data storage 16MB flash
5x 10/100/1000 5x 10/100/1000
5x 10/100 Ethernet ports with
Ethernet Ethernet ports with Ethernet ports with
Auto-MDI/X
Auto-MDI/X Auto-MDI/X
SFP - 1.25Gb
PoE in: 8V-30V DC PoE in: 12V-57V
PoE in: 6V-30V DC on Ether1; Jack:
Power input on Ether1; Jack: DC on Ether1;
6V-30V DC
8V-30V DC Jack: 6V-30V DC
On ports 2-5, Output: 1A max per port;
Power output -
2A max total
LEDs Power, user, 5 Ethernet LEDs
Hardware encryption Yes -
Dude server package
Yes -
support
USB Yes, type A 2.0 - Yes, type A 2.0
Ethernet routers
Power consumption 5W 2W 3W 9W
Operating System MikroTik RouterOS, Level 4 license
RouterBOARD
RouterBOARD in
in a plastic case, RouterBOARD in a plastic case, 24V
Package contains a plastic case, 12V
24V 0.38A power 2.5A power adapter
1A power adapter
adapter
Poweradapter
63
PowerBOX
The PowerBOX is an outdoor five Ethernet port router with PoE output on
four ports. You can use this device to supply power to four PoE capable
devices such as our SXT or others. Since the device has a waterproof
outdoor case, you can mount it on a tower, or in other outdoor locations.
The unit has five shielded Ethernet ports, four of which can power other PoE
capable devices with the same voltage as applied to the unit (max current out
is 1A per port, max total out is 2A).
Less power adapters and cables to worry about!
Product code RB750P-PBr2

CPU QCA9531 650MHz CPU
Memory 64MB 200MHz DDR RAM, 64MB Flash
Ethernet 5x 10/100 Mbit/s Ethernet with Auto-MDI/X
Extras Reset switch, voltage and temperature monitors
LEDs 11x LED (5x user LEDs)
Power input PoE in: 5-30V; packaged with 24V DC 2.5A power adapter
Ethernet routers
IECcord Metalring Mountingloop POEinjector Poweradapter DINmount
65
RB2011 Series
RB2011 are multifunctional routers with 5 Gigabit Ethernet ports and 5
Fast Ethernet ports, and multiple models available. The RB2011iL are
lower cost, but the RB2011Ui series have full features.
All RB2011 devices are powered by a new generation Atheros 600MHz

74K MIPS CPU.
RB2011iLS-IN
Model RB2011iL RB2011UiAS
RB2011iL-IN CPU
Memory
Atheros AR9344 600MHz
64MB DDR SDRAM onboard memory 128MB DDR SDRAM onboard memory
Five 10/100 Mbit Fast Ethernet ports with Auto-MDI/X
Ethernet
Five 10/100/1000 Mbit Gigabit Ethernet ports with Auto-MDI/X
Extras Reset button, Reset jumper
LEDs Power, User, Ethernet activity
Power input Jack 8-28V DC; PoE in: 8-28V DC on Ether1 (Non 802.3af).
Power output 500mA on Port 10
RB2011UiAS-IN Operating temperature -20°C .. +70°C tested
Desktop:230x90x25mm
Dimensions
Rackmount:443x92x44mm
Power consumption 8W max 15W max
Operating System MikroTik RouterOS, Level 4 license MikroTik RouterOS, Level 5 license
Package includes RB2011, 24V 0.8A power supply
RB2011iL-RM
Feature / Model 2011iL-IN 2011iL-RM 2011iLS-IN 2011UiAS-IN 2011UiAS-RM
Enclosure Desktop Rackmount Desktop Desktop Rackmount
SFP port - - Yes Yes Yes
Ethernet routers
USB - - - Yes Yes
RB2011UiAS-RM
Poweradapter
67
RB3011
The RB3011 is a new multi port device, our first to be running an
ARM architecture CPU for higher performance than ever before. The
RB3011 has ten Gigabit ports divided in two switch groups, an SFP
cage and for the first time a super speed USB 3.0 port, for adding
storage or an external 3G/4G modem.
In addition, it has a touchscreen LCD panel, a serial console port, and

PoE output functionality on the last Ethernet port.
Product code RB3011UiAS-RM

CPU Two core IPQ8064 1.4 GHz CPU
Memory 1GB DDR3 RAM
Ethernet Ten 10/100/1000 Mbit Gigabit Ethernet ports with Auto-MDI/X
RB3011UiAS-RM Extras One USB 3.0 type A slot, Reset button, Reset jumper
LEDs Power, User, Ethernet activity
Power input Jack 10-30V DC; PoE in: 10-30V DC on Ether1
Power output 1A on Port 10
Serial port RJ45
Enclosure Rackmount
Ethernet routers
SFP port One SFP cage
USB port One USB 3.0 type A
Package includes RB3011, 24V 1.2A power adapter
Poweradapter
69
RB1100AHx2
This device is a high performance 1U rackmount Gigabit Ethernet
router. It has thirteen individual gigabit Ethernet ports, two 5-port switch
groups, and includes Ethernet bypass capability.
RB1100AHx2 has a dual core 1066MHz CPU with hardware

accelerated IPsec encryption, a SODIMM slot for RAM, one microSD
card slot, a beeper and a serial port.
It comes preinstalled in a 1U aluminium rackmount case, assembled

and ready to deploy.
CPU PowerPC 1066MHz Dual Core with hardware encryption

Memory SODIMM DDR Slot; 2GB installed
Boot loader RouterBOOT, 1Mbit Flash chip
Data storage Onboard NAND memory chip
Thirteen 10/100/1000 Mbit/s Gigabit Ethernet withAuto-MDI/X
Ethernet
Includes switch to enable Ethernet bypass mode in two ports
Storage Onboard NAND, one microSD slot
Serial port One DB9 RS232C asynchronous serial port
Extras Reset switch, beeper, voltage and temperature sensors
Power input IEC C14 standard connector 110/220V
Fan Dual fan with failover support mounted at case back
Dimensions 1U case: 44x176x442mm
Included RB router, IEC cord, rackmount ears (aluminum), screw and feet kit (K10)
Ethernet routers
IECcord Rackmountears Screwandfeetkit
71
Cloud Core Router
CCR1009 series
The CCR1009 is a powerful Ethernet router based on the cutting edge TILERA
9 core CPU that comes with seven Gigabit Ethernet ports and one combo port
(Gigabit Ethernet or SFP).
Three models are available.

CCR1009-7G-1C-PC comes with 1GB of RAM and passive cooling enclosure.
It’s is equipped with two heat-pipes and a specially designed heat-sink, so its
completely silent.
CCR1009-7G-1C-1S+PC CCR1009-7G-1C-1S+PC also comes with passive cooling enclosure,

additionally it has 2GB of RAM and one SFP+ cage for 10G connections.
CCR1009-7G-1C-1S+ has the 2GB of RAM, one SFP+ cage for 10G
connections, 1U rackmount case and dual power supplies built in for
redundancy (if one power line fails, the other one will take over automatically).
Product code CCR1009-7G-1C-1S+PC CCR1009-7G-1C-PC CCR1009-7G-1C-1S+

CPU TILE-Gx8009
9x cores, 1.2Ghz per
Cores 9x cores, 1Ghz per core
core
Built in 2GB RAM 533 Built in 1GB RAM 800 Built in 2GB RAM 800
Memory
Mhz Mhz MHz
CCR1009-7G-1C-PC
Ethernet/SFP combo port 1x
1x SFP cage, 1x SFP cage,
SFP 1x SFP cage
1x SFP+ cage 1x SFP+ cage
microUSB port, Smart- microUSB port, Smart-
Expansion microUSB port
Card slot, MicroSD slot Card slot, MicroSD slot
Storage 128MB Onboard NAND
LCD Yes No Yes
Ethernet routers
Reset switch; beeper;
Reset switch; beeper; voltage, current and tempera- voltage, current and
CCR1009-7G-1C-1S+ Extras
ture monitoring temperature monitoring,
speed controlled fan
2x IEC C14 power jacks
External 18-56V PSU included, Passive PoE input
Power options AC 110/220V, PoE in
18-56V
18-56V
Max power
33W 25W 34W
consumption
Board dimensions 272x190x47mm 444x175x47mm
IECcord USBcableRackmountears(PC)PoweradapterRackmountears(RM)
73
Cloud Core Router
CCR1016 Series
CCR1016 is an industrial grade router with a cutting edge 16 core
Tilera CPU. If you need many millions of packets per second - Cloud
Core Router is your best choice.
Two models are available. CCR1016-12G has twelve Gigabit ethernet

ports, a serial console cable and a USB port.
CCR1016-12S-1S+ has twelve SFP ports and one SFP+ port for 10G
connectivity. It is available in a 1U rackmount case and also has a
serial console port, a touchscreen LCD and a USB port.
CCR1016-12G
Model CCR1016-12G CCR1016-12S-1S+

CPU Tilera Tile-Gx16 CPU (16-cores, 1.2Ghz per core)
Two SODIMM DDR3 slots, 2x 1GB in-
Memory 2GB built-in RAM
stalled (no hw or software max limit)
CCR1016-12S-1S+ Ethernet
Twelve 10/100/1000 Mbit/s Gigabit Ether-
-
net with Auto-MDI/X
SFP - Twelve SFP ports and one SFP+ port
Storage 512MB Onboard NAND 128MB Onboard NAND
Extras Reset switch; beeper; voltage, current and temperature monitoring; speed controlled fan
1x PSU unit built in, 110/220V. 2x PSU units built in, 110/220V.
Power input
IEC C14 standard connector IEC C14 standard connectors
Dimensions 442x185x44.5mm 442x195x44.5mm
Ethernet routers
Operating temp. Max ambient temperature 60°C @ 1.2GHz Max ambient temperature 60°C @ 1.2GHz
router in a 1U case, IEC power cable, router in a 1U case, IEC power cable, RJ45
Included
usb cable SFP 10/100/1000M copper module
IECcord RJ45SFPcopermoduleRackmountears USBcable

75
Cloud Core Router
CCR1036 Series
Cloud Core Router is an industrial grade Ethernet router with a cutting edge
36 core TILERA CPU. These are our top of the line routers and can deliver up
to 42 million packets per second, or 28 Gigabits throughput
(CCR1036-8G model).
Two models are available, the CCR1036-12G-4S has 12 Gigabit ports and 4
CCR1036-12G-4S SFP ports. The CCR1036-8G-2S+ has 8 Gigabit ports, and two SFP+ ports for
10G connectivity. Both of the units are also available with 16GB of RAM
(-EM upgrade).
Model CCR1036-12G-4S CCR1036-8G-2S+

CPU Tilera Tile-Gx36 CPU (36-cores, 1.2Ghz per core)
Two SODIMM DDR3 slots, 2x2GB installed (no hw or software max limit)
Memory
“-EM” models: 2x8GB RAM installed
CCR1036-8G-2S+ Ethernet
Twelve 10/100/1000 Mbit/s Gigabit Eight 10/100/1000 Mbit/s Gigabit Ethernet
Ethernet with Auto-MDI/X with Auto-MDI/X
Two 10G Ethernet SFP+ cages
Four 1.25G Ethernet SFP cage (Mini-
(Mini-GBIC; SFP module not included),
SFP GBIC; SFP module not included),DDMI
DDMI support. SFP+ port supports only
support
modules up to 10KM LR (long reach).
Storage 1GB Onboard NAND
Extras Reset switch; speed controlled fan; beeper; voltage, current and temperature monitoring
Power input IEC C14 standard connector 110/220V (PSU included), up to 60W power consumption
Board dimensions 355x145mm44.5mm
Operating temp. Max ambient temperature 60°C @ 1.2GHz
Included Router in a 1U case, power cable, usb cable, rackmount ears
Ethernet routers
IECcord Rackmountears USBcable
77
Cloud Core Router
CCR1072-1G-8S+
Our new flagship router, the CCR1072, is powered by a Tilera 72 core CPU,
each core is clocked at 1GHz, and to fully utilise this power, the CCR1072 is
equipped with eight independently connected 10G SFP+ ports.
Thanks to the unique 72 core processor and ports that are directly connected
to the CPU, CCR1072 is capable of over 120 million packets per second
throughput.
The unit comes equipped with two removable (hot plug) power supplies for
redundancy, smart card slot, eight SFP+ ports and 16GB of built in ECC RAM.
The CCR1072 also has two built-in M.2 slots, microSD and 2x USB for adding
storage, to use for proxy cache, user manager and other features. The M.2
slots accept 800mm Key-M x4 PCIe 2.0 modules.
Full set of features Highest performance New generation CPU
• 8x SFP+ ports • over 120 million pps • 72 core CPU

• 16GB ECC RAM packet throughput • 1 GHz clock per core
• Ports directly • up to 80 Gbps • State of the art TILE G
connected to CPU throughput architecture
• microSD and 2x M.2
CPU Tilera Tile-Gx72 CPU (72-cores, 1Ghz per core)

Memory Built in 16GB ECC RAM
Ethernet One 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X
Ethernet routers
SFP Eight 10G Ethernet SFP+ cages (Mini-GBIC; SFP module not included), DDMI support
Expansion 1x microUSB, 1x regular USB 2.0, full size Smart Card slot.
Storage 1GB Onboard NAND, microSD slot
Reset switch; speed controlled fans; beeper; voltage, current and temperature
Extras
monitoring
Power options 2x IEC C14 standard connectors 110/220V (Two redundant PSU)
Operating temp. Max ambient temperature 60°C @ 1.2GHz
Product dimensions 443x310x44.5mm
2xIECcords Screwandfeetkit Rackmountears

79
mAP series
mAP is a tiny size 2.4GHz wireless Access Point with full RouterOS
capabilities. Two models are available.
The mAP is dual chain 802.11 b/g/n device with two Ethernet ports. It
also works as a PoE injector - the second Ethernet port provides up
to 500mA of power to another device, for example, you can connect a
SXT CPE device to it.
The mAP lite is dual chain 802.11 b/g/n device with one Ethernet port,
barely larger than a matchbox. It comes with a built-in magnet, so you
can attach it to any ferrous surface, or, if those are not available, a
metallic plate with an adhesive back is also included. It can also serve
as a simple configuration tool for your servers, if there is no ethernet on
your mobile device, plus, it neatly attaches to the rack with it’s magnet.
Model mAP mAP lite

Product code RBmAP2nD RBmAPL-2nD
CPU Qualcomm Atheros AR9531 650 MHz QCA9533 650 MHz
RAM 64MB DDR2 64 MB DDR2
2x 10/100 Mbit/s Ethernet with 1x 10/100 Mbit/s Ethernet with
Ethernet
Auto-MDI/X Auto-MDI/X
Storage 16MB built in flash storage
Wireless 2.4 GHz 802.11b/g/n, dual-chain
Wireless for home &office

Antenna 1.2dBi built in 1.5dBi built in
Power input Passive and 802.3af/at
Pasive PoE output, up to 500mAon
Power output -
Ether 2
Power consumption 5W 3.5 W
Case dimensions 68x68x19mm 48x49x11mm
Extras MicroUSB type AB -
mAP device, 24V 0.8A power adapter, mAP device, 5V 1A power adapter, mount
Included
microUSB type B to USB type A adapter. kit
RBmAP2nD / RBmAPL-2nD
1MBit/s 22dBm / -96dBm
MCS0 20dBm / -93dBm
MCS7 16dBm / -71dBm
USBadapter Poweradapter K-44mountkit
81
cAP series
The cAP lite is a tiny access point device with a clean and simple design which will blend
into any environment. Perfect for public locations and hospitality businesses like hotels,
airports, shopping malls etc.
These devices support 802.11b/g/n and can be powered by PoE. The cAP can also be
use both, either as a part of a CAPsMAN controlled network, or as a stand alone access
point with the full potential of RouterOS.
Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter
and even the screws and screw anchors.
cAP For the cAP lite, we also include two different casings, which can easily be swapped out,
or, if you really like to fit the design with the environment, we are providing 3D printer
friendly design files. The customisation possibilities are endless.
Product code cAP cAP lite

CPU Atheros QCA9533 650MHz network processor
Memory 64MB RAM
Wireless Wireless Built-in 2.4 GHz 802.11b/g/n, dual chain
Extras Reset switch
LEDs 5x LEDs, 1x user LED
5 V - 60 V (jack, 802.3af/at or
Power input Passive or 802.3at/af PoE input, 11-56V
passive PoE)
Consumption 4W

Wall case: 88x52x20mm
Dimensions ⌀ 185mm, height: 31mm
Ceiling case: ⌀88mm x 20mm
Operating temperature -20°C .. +70°C tested -40°C .. +70°C tested
Operating system RouterOS, WISP AP (level 4) license
24V 0.38A power adapter, PoE injector, ceiling mount base, ceiling mount
Package contains
attachment, fastening set
Antenna Max gain 2dBi Max gain 1.5 dBi
cAPlite (comeswithtwocases)
802.11b/g TX power RX Sensitivity

1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
802.11n TX power RX Sensitivity
MCS0 20 -93
MCS7 16 -71
Poweradapter Fasteningset CeilingmountbaseCeilingmountattachment PoEinjector

(cAPlite) (cAP) (cAP) 83
wAP
The wAP is a small weatherproof wireless access point for your mobile devices,
perfect for installation outside your house, in the garden, on your porch or anywhere
else where you need wireless access from your phone or computer.
We have two models available - regular wAP (2.4GHz only) and wAP ac (2.4/5GHz).
The regular wAP has one 10/100 Ethernet port, it supports 802.11b/g/n wireless
standards. It looks unobtrusive and sleek, available in two colors - black (RBwAP2nD-
BE) and white (RBwAP2nD).
The wAP ac has one Gigabit Ethernet port and can work at both the 2.4GHz and 5GHz
frequencies simultaneously. It supports both 802.11b/g/n and 802.11ac standards. The
wAP ac is also available in two colors - black (RBwAPG-5HacT2HnD-BE) and white
(RBwAPG-5HacT2HnD)
The wAP is weatherproof and can be fixed to any external wall from the inside of the
case - so that it is securely attached to it’s mounting location. The bottom door can
also be secured with a special screw, which can only be opened by the owner.
RBwAP2nD (white), RBwAPG-5HacT2HnD (white),

Model
RBwAP2nD-BE (black) RBwAPG-5HacT2HnD-BE(black)
CPU QCA9533 650 MHz QCA9556 720 MHz
Memory 64MB RAM
One 10/100 Mbit/s Fast Ethernet port One 10/100/1000 Mbit/s Fast Ethernet
Ethernet
with Auto-MDI/X port with Auto-MDI/X
Built-in 2.4 GHz 802.11b/g/n, dual-chain
Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain
Built-in 5 GHz 802.11a/n/ac, triple-chain

Antenna Max gain 2dBi
LEDs 5x LEDs, 1x user LED
Power input 11V-57V (Passive PoE and 802.3af/at with unshielded cable)
Consumption 4W 12W
Dimensions 185 x 85 x 30 mm
Operating system RouterOS, WISP AP (level 4) license
Power adapter, PoE injector, ceiling mount base, ceiling mount
Package contains
attachment
RBwAP2nD RBwAPG-5HacT2HnD
2.4 GHz Tx (dBm) Rx (dBm) 2.4 GHz Tx (dBm) Rx (dBm) 5GHz Tx (dBm) Rx (dBm)
1Mbit/s 22 -96 1MBit/s 25 -95 6MBit/s 25 -96
11Mbit/s 22 -89 11MBit/s 25 -90 54MBit/s 25 -81
6Mbit/s 20 -93 6MBit/s 25 -95 MCS0 25 -96
54Mbit/s 18 -74 54MBit/s 23 -80 MCS7 24 -77
MCS0 20 -93 MCS0 25 -95 MCS9 23 -72
Poweradapter Screwkit 2xplasticstraps Ceilingmountbase PoEinjector MCS7 16d -71 MCS7 22 -74
85
hAP
The home Access Point (hAP) is an ideal little device for your apartment, house or
office.
It supports button triggered WPS, for the convenience of not typing a complicated
password when somebody wants to have wireless internet access, and can also be
told to change to cAP mode and join a CAPsMAN centrally managed network by the
push of a button.
Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall,
user access control and many others.
hAP lite is a low cost model with four Ethernet ports that comes with classic desktop
case (RB941-2nD) or tower case (RB941-2nD-TC).
hAP comes with five Ethernet ports, full size USB and PoE output function for port 5 - it
can power other PoE capable devices with the same voltage as applied to the unit.
Maximum load on the port is 500mA.
hAPlite hAPlite
(towercase) (classiccase)
Model hAP hAP lite
RB941-2nD (classic case)
Product code RB951Ui-2nD
RB941-2nD-TC (tower)
CPU QCA9531 650MHz CPU QCA9533 650MHz CPU
Memory 64MB DDR2 RAM 32MB DDR RAM
Ethernet 5x 10/100 Mbit/s Ethernet with Auto-MDI/X 4x 10/100 Mbit/s Ethernet with Auto-MDI/X
Onboard dual chain 2.4GHz 802.11b/g/n;
Wireless cards
10kV ESD protection on each RF port, WPS support via button

Extras Reset switch
LEDs Power LED, 5x Ethernet LED, user LED Power LED, 4x Ethernet LED, user LED
Power input Packaged with 24V DC 0.8A power adapter Packaged with 5V DC 0.7A power adapter
Power output Yes (Ether5) -
USB 1x USB type A 1x USB type A (power only)
113x89x28mm (classic case)
124x100x54mm (tower)
Operating Temp -20C .. +70C tested
hAP OS MikroTik RouterOS, Level 4 license (AP support)
hAP and hAP lite

TX/RX at 1Mbps 22dBm / -96dBm
USBpoweradapter5V Poweradapter24V TX/RX at MCS7 16dBm / -71dBm
0.7A(hAPlite) 0.8A(hAP) Antenna 1.5dBi gain
87
hAPac
hAP ac series
The hAP ac is a Dual-concurrent Access Point, that provides Wifi coverage for
2.4GHz and 5GHz frequencies at the same time. Two models are available.
The hAP ac lite is equipped with a 650MHz CPU, 64MB RAM, five
10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n
2.4GHz wireless, single chain 802.11ac 5GHz wireless and USB port for
3G/4G modem.
The hAP ac is equipped with a 720MHz CPU, 128MB RAM, five Gigabit
Ethernet ports (PoE output on port #5), triple-chain 802.11b/g/n 2.4GHz
wireless, triple-chain 802.11ac 5GHz wireless, SFP cage and USB port for
3G/4G modem.
Model hAP ac hAP ac lite / hAP ac lite tower

RB952Ui-5ac2nD (International)
Product code RB962UiGS-5HacT2HnT
RB952Ui-5ac2nD-US (USA)
CPU QCA9558 720MHz QCA9531 650MHz
Memory 128MB DDR2 RAM 64MB DDR2 RAM
5x 10/100/1000 Mbit/s Ethernet with
Ethernet 5x 10/100 Mbit/s Ethernet with Auto-MDI/X
Auto-MDI/X
2.4GHz 802.11b/g/n QCA9558 wireless module;
Wireless
5GHz 802.11ac QCA9880 wireless module;
Number of chains 3 1
hAPaclite Extras
Reset switch, beeper, PCB temperature
Reset switch
monitor, voltage monitor
Power input Packaged with 24V DC 1.2A power adapter

Power output Yes (Ether5)
USB 1x USB type A
hAPaclitetower SFP 1x SFP cage -

Operating Temp -20C .. +70C tested
OS MikroTik RouterOS, Level 4 license (AP support)
hAP ac hAP ac lite / hAP ac lite tower

2.4GHz 5GHz 2.4GHz 5GHz
TX/RX at 1Mbps 29dBm / -100dBm - 22dBm / -96dBm -
TX/RX at 11Mbps 29dBm / -94dBm - 22dBm / -89dBm -
TX/RX at 6Mbps 29dBm / -96dBm 28dBm / -96dBm 20dBm / -93dBm 23dBm / -93dBm
TX/RX at 54Mbps 26dBm / -81dBm 25dBm / -81dBm 18dBm / -74dBm 20dBm / -75dBm
TX/RX at MCS9 - 21dBm / -72dBm - 16dBm / -63dBm
Antenna 2.5dBi gain 2dBi gain 1.5dBi gain 2dBi gain
Poweradapter24V1.2A
89
RB951 high power series
The RB951 High Power is a wireless SOHO AP with a new generation
AtherOS CPU and more processing power. It has 600MHz CPU,
128MB RAM, high power 2.4GHz 1000mW 802.11b/g/n wireless AP
with antennas built in and USB port for external 3G/4G modem. The
device is very small and will look good in any home or office, wall
mounting anchor holes are provided.
Two models are available:

• The RB951G-2HnD has five Gigabit Ethernet ports;
• The RB951Ui-2HnD has five 10/100Mbps Ethernet ports and PoE
output function for port 5 - it can power other PoE capable devices
12V1Aadapter with the same voltage as applied to the unit. Maximum load on the
port is 500mA.
Model RB951G-2HnD RB951Ui-2HnD

RB951G-2HnD USB, power injector, 2GHz, 802.11n,
Features Gigabit, USB, 2GHz, 802.11n, dual chain
dual chain
CPU Atheros AR9344 600MHz CPU
Five independent 10/100/1000 Gigabit
Ethernet Five independent 10/100 Ethernet ports
Ethernet ports
LEDs Power, NAND activity, 5 Ethernet LEDs, wireless activity LED

PoE out passive on port 5, same voltage
Power out -
as input, max: 500 mA
Power consumption Up to 7W
24V0.8Aadapter RouterBOARD in a plastic case, power RouterBOARD in a plastic case, power
Package contains
adapter (12V, 1A) adapter (24V 0.8A)
Antennas 2x2 MIMO PIF antennas, max gain 2.5dBi

802.11g: -96dBm @ 6Mbit/s to -80dBm @ 54Mbit/s
RX sensitivity
802.11n: -96dBm @ MCS0 to -78dBm @ MCS7
RB951Ui-2HnD 802.11g: 30dBm @ 6Mbps to 25dBm @ 54 Mbps
TX power
Modulations
91
RB2011UiAS-2HnD-IN
RouterBOARD 2011UiAS-2HnD has most features and interfaces from
all our Wireless routers. It’s powered by the new Atheros 600MHz 74K
MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five
Fast Ethernet LAN ports and SFP cage (SFP module not included!).
Also, it features powerful (up to 1W!) dual chain 2.4Ghz 802.11bgn
wireless, RJ45 serial port, microUSB port and RouterOS Level 5
license.
RB2011UiAS-2HnD-IN comes with desktop enclosure, two indoor

antennas for wireless, power supply and touchscreen LCD panel.
General specifications
CPU Atheros AR9344 600MHz
Memory 128MB DDR2 SDRAM onboard memory
Five 10/100 Mbit Fast Ethernet ports with Auto-MDI/X
Ethernet
Five 10/100/1000 Mbit Gigabit Ethernet ports with Auto-MDI/X
Built in 2GHz dual chain 802.11b/g/n wireless device
Wireless
Also includes two 2.5dBi swivel antennas
Expansion One fixed Gigabit Ethernet SFP cage (Mini-GBIC; SFP module not included)
Reset button, Reset jumper, RJ45 serial port, LCD panel, Temperature and Voltage
Extras
sensors, powered micro-B USB connector, Beeper
Power input Jack 8-28V DC; PoE in: 8-28V DC on Ether1 (Non 802.3af). 11W max consumption
Power output 500mA on Port 10

Dimensions 214mm x 86mm
Package includes RB2011, power supply, USB cable
Feature / Model 2011UiAS-2HnD-IN

Enclosure Desktop
SFP port Yes
Serial port Yes
USB Yes
Wireless Yes
Antennas 2x built in 4dBi swivel
LCD display Yes
802.11b/g RX Sensitivity TX Power 802.11n RX Sensitivity TX power

1Mbit -96 30dBm MCS0/8 20MHz -95 30dBm
Poweradapter USBcable
93
RB411
Perfect for building custom AP and CPE devices
RB411AR The RB411 are our customizable routers with one Ethernet and one
miniPCI slot. There are four models in the RB411 series.
Use this device in an outdoor case for a AP/CPE device, or a point to

point wireless link installation. The miniPCI slot allows you to choose
your own preferred wireless card model.
Data storage NAND memory chip

Ethernet One 10/100 Mbit/s Ethernet port with Auto-MDI/X
miniPCI One MiniPCI Type IIIA/IIIB slot
LEDs Power, NAND activity, 5 user LEDs
Dimensions 105x105mm
Power consumption 1,4W board only, 10W available to minIPCI card
Operating System MikroTik RouterOS
Feature / Model 411U 411AR 411AH 411GL

CPU MHz 300 300 680 680
RAM MB 32 32 64 64
Power jack yes yes yes yes
Serial port yes yes yes -
USB yes - - yes
miniPCI express yes - - -
Integrated wireless - 2.4GHz - -
RouterBOA
Gigabit LAN - - - yes
RouterOS License Level 4 Level 4 Level 4 Level 4
95
RB433
Perfect for building custom AP devices
RB433AH The RB433 is a multi port device. Use it in an outdoor case for a sector
AP installation, or for a wireless backhaul. Three ports give you plenty
of configuration options for many wireless scenarios.
New to the RB433 family is the RB433L series - a light version with
only the most essential features and available at a lower cost.
We currently have four different models in the RB433 series.
CPU Atheros AR7130/ AR7161

Memory DDR SDRAM onboard memory
Boot loader RouterBOOT
Data storage NAND memory chip
Ethernet Three 10/100 Mbit/s Ethernet ports with Auto-MDI/X
miniPCI Three MiniPCI Type IIIA/IIIB slots
Extras Reset switch, beeper, voltage monitor
Power input PoE in: 8-28V DC on Ether1 (Non 802.3af), Power jack (8-28V DC)
Power consumption 2W board only, 14W available to minIPCI cards
Operating System MikroTik RouterOS
Feature / Model 433UL 433 433AH 433GL

CPU MHz 300Mhz 300Mhz 680Mhz 680Mhz
RAM MB 64MB 64MB 128MB 128MB
Serial port - yes yes -
RouterBOA
USB yes - - yes
Gigabit LAN - - - Yes
RouterOS License Level 4 Level 4 Level 5 Level 5
97
RB435G
Five miniPCI slots and three Gigabit Ethernet ports give you enough
connectivity options to use the RB435G as the central part of your
network. Now with Gigabit ports, to properly utilize all the speed
802.11n with Nv2 wireless.
Five miniPCI slots to be used for four sectors and a backbone, or any
other configuration you need.
The two USB 2.0 ports can be used for extending storage, adding a
3G wireless modem for backup connectivity,for a mobile installation or
all together.
The RB435G comes with a 680MHz Atheros CPU and is preinstalled

with a Level 5 RouterOS license.
CPU Atheros AR7161 680MHz

Memory 256MB DDR SDRAM onboard memory
Data storage NAND memory chip and microSD slot for expansion
Ethernet Three 10/100/1000 Gigabit Ethernet ports with Auto-MDI/X
miniPCI Five miniPCI Type IIIA/IIIB slots
Expansion Two USB 2.0 ports with powering (5V 1A supply)
Extras Reset switch, beeper, temperature, voltage and current monitors
Power consumption ~4.5W without extension cards
RouterBOA
Output to cards 19W without any cooling, up to 40W with active cooling
99
RB850/450
The RB450/RB850 is our five Ethernet port RouterBOARD line with
DB9 RS232C serial port.
Three models with same form factor are available:

• RB450 - basic model with 300Mhz CPU, 32MB RAM and five
10/100Mbps Ethernet ports;
• RB450G- advanced model with 680Mhz CPU, 256MB RAM, five
Gigabit Ethernet ports and microSD slot;
RB850
• RB850Gx2 - new generation model with dual core CPU, 512MB

Gx2
RAM, five Gigabit Ethernet ports and microSD slot.
Model RB850Gx2 RB450G RB450

CPU P1023 533MHz (Dual core) AR7161 680MHz AR7130 300MHz
512MB DDR3 667MHz
Memory 256MB DDR SDRAM 32MB DDR SDRAM
RAM
Data storage 512MB NAND memory chip, microSD slot 128MB NAND memory chip
Five 10/100 Mbit/s Ethernet

Five 10/100/1000 Mbit/s Gigabit ports withAuto-MDI/X, ports with Auto-MDI/X,
Ethernet Hardware switch chip and port mirror support Hardware switch chip and
port mirror support
RB45
Reset switch, beeper, Reset switch, beeper, Reset switch, beeper,

0G
Extras voltage and temperature voltage and temperature voltage and temperature
monitors monitors monitors
Power
8W 6W 4W
consumption
Dimensions 90x115mm
RouterBOA
RouterOS License Level 5
RB4
50
101
RB493
The RB493 has nine ethernet ports and three miniPCI slots, it also
has a switch chip, so the ethernet ports of your choice can be grouped
together to make it act as a switch.
RB493 includes RouterOS - the operating system, which will turn this
powerful system into a highly sophisticated router, firewall or bandwidth
manager.
With nine Ethernet ports, and three miniPCI slots, this is our most
versatile RouterBOARD model.
The RB493AH model includes the higher speed Atheros 680MHz CPU,
more memory, and a Level5 license for more a simultaneous tunnel
interfaces and hotspot users and RB493G adds a Gigabit port and a
USB port.
Model RB493AH RB493G

CPU AR7161 680MHz AR7161 680MHz
RAM 128MB 128MB
External storage - microSD
Ethernet Nine 10/100 Mbit/s Nine 10/100/1000 Gbit/s
miniPCI Three miniPCI slots
1x unpowered USB 2.0 port, temperature
Extras
and voltage sensors
Power options PoE: 8-28V DC on Ether1 (Non 802.3af). Jack: 8-30V DC
Dimensions 105mm x 160mm, 189 grams
Consumption ~3W without extension cards, maximum – 16 W
RouterBOA
License Level 5 license
103
RB800
The RB800 is an advanced high performance wireless platform. It has
four miniPCI slots, three Gigabit Ethernet ports, two daughterboard
connectors, a miniPCI-e slot and a compact flash slot.
The two daughterboard connectors allow you to expand the number of

wired and wireless ports, and the new high power CPU is capable of
supporting them all. You can use various daugherboards to expand the
number of interfaces on this device - RB502 and RB604 are available
separately.
Combined with RouterOS - RB800 is the most powerful and

sophisticated wireless router, firewall and bandwidth manager. With
many expansion options. Our top of the line wireless device.
CPU MPC8544 800MHz

Memory 256MB DDR2 SDRAM onboard memory
Data storage NAND memory chip, CF slot on back
Ethernet Three 10/100/1000 Mbit/s Ethernet ports with Auto-MDI/X
miniPCI 4 x miniPCI, 1 x miniPCI-e
Expansion PCI daughterboard port
Extras Reset switch, beeper, 4x fan headers, voltage and temperature sensors
Serial port One DB9 RS232C asynchronous serial port, One serial port header
LEDs Power, 1x User LED
PoE in: 36-56V DC (including power over datalines)
Power input
Power jack: 10-56V DC
RouterBOA
105
RB953GS-5HnT-RP
RouterBOARD 953GS-5HnT-RP is our first product with 5GHz 3x3
MIMO Triple Chain support. It has powerful (up to 1600mW!)Atheros
QCA9558 802.11a/n wireless chip with three RPSMA connectors
onboard.
RB953GS-5HnT-RP is equipped with new Scorpion 720Mhz CPU,

128MB RAM and three Gigabit Ethernet ports, to take advantage of
high-speed 3x3 MIMO wireless. Moreover, it comes with two SFP cages
to accommodate FTTH requirements.
Handy additions are two miniPCI-express slots and two SIM slots, for
multiple 3G/4G connections or wireless expansion.
Unit comes with preinstalled RouterOS Level 5 license.

Model 953GS-5HnT-RP
CPU QCA9558 720MHz
Data storage NAND 128MB memory chip
Ethernet 3x10/100/1000 Gigabit Ethernet ports with Auto-MDI/X
Wireless Built-in 5GHz 802.11a/n, three chains, 3x RPSMA connectors
miniPCIe 2x MiniPCIe slots for 802.11 or 3G (using 3G disables the USB port)
SFP 2x SFP cages
Switching chip AR8327
PCB temperature monitor, voltage monitor, 2x fan headers, beeper, 1x USB,
Extras 2x SIM slots (for use with 3G modems that need to be installed in the
miniPCIe slot)
Serial Port 1x DB9 RS232C asynchronous serial port, 1x serial port header
LEDs 9x total, 6x user LEDs
Power input PoE in: 8-30V, Power jack: 8-30V DC
RouterBOA
Operating System MikroTik RouterOS, WISP AP (Level 5) license
TX power / RX sensitivity
Frequency range 4900-5920MHz
107
RB911 Series
The RB911 series devices are perfect for building low cost CPE
devices, and now a new model has been added to our line up - with
802.11ac support, to reach speeds not possible before.
The RB911 series are small wireless routers with an integrated wireless
cards. They are equipped with powerful CPU, providing superb value
for money.
These devices include RouterOS, the operating system which can be

a router, firewall, bandwidth manager, a CPE and more, all at the same
time. All devices have built-in 16kV ESD protection on the RF port.
RB911- RB911G- RB911G- RB911- RB911G-

Model RB911-5Hn RB911-2Hn
5HnD 5HPnD 2HPnD 5HacD 5HPacD
Band 5GHz 5GHz 2.4GHz 5GHz 2.4GHz 5GHz 5GHz
RB911G-5HPacD RB911-5HacD
Chains 1 2 1 2 2 2 2
Gigabit - - - + + - +
802.11ac - - - - - + +
High Power - - - + + + +
Power jack - - - + + +
Consumption 5W 7W 4W 11W 11W 7W 12W
Beeper - - - + + - +
Voltage monitor - - - + + - +
PCB temperature
- - - + + - +
monitor
Supported channels 20/40MHz 20/40/80MHz
Max TX power 23dBm 26dBm 24dBm 30dBm 30dBm 29dBm 31dBm

Power input PoE in: 8-30V DC on Eth 1 (Non 802.3af)
RouterBOA
RouterOS Licence WISP CPE (Level 3) license
RB911G-5HPnD RB911-2Hn
109
RB912
The RB912 is a small wireless router with an integrated high power
wireless card and an additional miniPCIe slot for 802.11 wireless, or
3G card. Both 2GHz and 5GHz models are available. The Gigabit port
helps to utilize the full potential of 802.11n wireless speeds.
The integrated wireless card is capable of up to 1000mW output power.

It has built in 16kV ESD protection on both the Ethernet and the MMCX
ports.
Model RB912UAG-5HPnD RB912UAG-2HPnD

1 Ethernet, 1 miniPCIe, USB, Additional memory,
Features
Gigabit, High power, Dual chain
Data storage onboard NAND memory chip
Built in 5GHz 802.11a/n, Built in 2GHz 802.11b/g/n,
Wireless
2x MMCX connectors 2x MMCX connectors
beeper, signal and status LEDs, SIM slot (requires 3g miniPCIe card),
Extras
voltage and temperature sensors
Expansion miniPCIe slot for 802.11 or 3G (using 3G disables the USB port), USB 2.0 port
OS MikroTik RouterOS, Level 4 license (supports wireless AP mode)
RB912UAG-5HPnD RB912UAG-2HPnD
RouterBOA
Frequency range 4900-5920MHz 2400MHz-2500MHz
111
RB922UAGS-5HPacD
The RB922 is a very versatile wireless router, perfect for assembling your own
solution. It supports the new 802.11ac standard for high speed wireless (up to
866Mbit datarate and 20/40/80MHz channels). The device has ports and slots
for many uses: 1x SFP cage, miniPCIe slot with SIM for 3G/4G modem, USB
port, Gigabit Ethernet port and two MMCX connectors for the built in 802.11ac
radio.
Order code RB922UAGS-5HPacD

Wireless QCA9882 5GHz 802.11ac, 2x MMCXconnectors, Dual chain
Supported
20/40/80MHz
channels
SFP 1x SFP cage available
Expansion USB 2.0 port, 1x MiniPCIe slot, SIM slot (requires 3g miniPCIe card)
Power input PoE in: 8-30V DC on Ether1 (Non 802.3af). Consumption: 17W
Wireless transmit/receive specifications

RouterBOA
113
mANT series
The new sector mANT antennas are the perfect companion for the BaseBox,
NetBox, NetMetal or any other outdoor wireless device.
The mANT is a dual-polarization antenna with two RP-SMA connectors, it

comes in two sizes, the 15dBi model and the 19dBi model. Both antennas have
120 degree beamwidth.
The mANT 15s is compatible with the SXT type mount, so you can use it with
our durable and adjustable QuickMount systems. It comes with quickMOUNT
PRO and the mANT 19s comes with metallic U bolt type mounts.
19s
mANT
Model mANT 15s mANT 19s
Product code MTAS-5G-15D120 MTAS-5G-19D120
Antenna gain 15 dbi 19 dbi
Frequency range 5.17 - 5.825 GHz 5.17 - 5.825 GHz
Polarization Vertical and horizontal Vertical and horizontal
3DB Beamwidth - azimuth 120 deg 120 deg
3DB Beamwidth - elevation 10 deg 5 deg
VSWR 1.43 typ, 1.8 max 1.43 typ, 1.8 max
Port to Port isolation >40 dB min >40 dB min
Front-to-Back ratio >30 dB >30 dB
Cross Polarization >30 dB >30 dB
Interfaces andaccessories
Package: 1.35 Kg Package: 3.01 Kg
Weight
Unit: 816g Unit: 1,36 Kg
Dimensions 140 x 348 x 82 mm 152 x 598 x 78 mm
115
mANT30 series
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry
standards. Built to seamlessly accomodate our BaseBox and NetMetal series products,
also NetBox, but can be used for any pole mounted wireless device due to the adequate
length of the included FlexGuide cable.
Two antennas are available, with a standard type mount (MTAD-5G-30D3), and with a
precision alignment mount (MTAD-5G-30D3-PA). The antennas come packaged with
all necessary accessories and cables.
Electrical Specifications
Frequency Range 4.7-5.875 GHz Horizontal polarization
Gain 30 dBi typically
Polarization Dual (Vertical and Horizontal)
MTAD-5G-30D3
3dB Beamwidth 3 deg
(Withstandardtypemount) Standards Complies with EN 302 326 DN1, DN2, DN3, DN5
VSWR ≤ 1.4 typ, ≤ 1.8 max
Port to Port Isolation >40dB min
Front-to-Back Ratio >30 dB
Cross Polarization >40 dB
Power Rating 100 watts
Impedance 50 ohms
+/- 20 deg (MTAD-5G-30D3),
Elevation adjustment range
+/- 15 deg (MTAD-5G-30D-PA)
Physical/Environmental Specifications
Diameter x Depth 70 x 45cm (27.5 x 17.8in)
5.7kg (12.6 lbs) PA and 4.8kg (10.7 lbs)
Weight neto
standard version
Reflector Aluminum
Availableseparately,theRadomereduces Outdoor Rating ETSI EN 300 019-2-4

Vertical polarization
windload,protectsreflectorsurfaces Wind Survivability 201kph (125mph)
fromharshenvironment. Wind Load (125 mph) 181.4kg (400 lbs)

Operating temperature -40°C .. 70°C tested
(MTAD-5G-30D3): 3 to 7cm (1.2 to 2.75in)
Pole Mount Diameter Range
(MTAD-5G-30D-PA): 3 to 10cm (1.2 to 3.9in)
Connector (2) RP-SMA Female (outside thread)
Packaged size 73x73x20cm (29x29x8in)
(MTAD-5G-30D3): 7.5 kg (16.5 lbs),
Packaged weight
(MTAD-5G-30D3-PA): 8.4 kg (18,5)
Can directly mount Basebox and other future
Compatible with RouterBOARD devices, or accept any pole-
mounted device
FlexGuide RPSMA RF Cables (RP-SMA-male
to RP-SMA-male) x 2pcs; Bracket for mounting
MTAD-5G-30D3-PA FlexGuide Package includes
BASEBOX series radio; Self-Bonding Tape for
(Withprecisionalignmentmount) insulating the RF cables x 2 slices; Precise
alignment mechanisms
(PA Version only)
Note: Basebox radio not included, available separately.
117
Sleeve30 Kit
The Sleeve30 kit for our mANT30 parabolic antenna will enhance point-
to-point link performance by reducing noise and will also reduce impact on
adjacent RF devices by removing the side radiation from the antenna.
Additional and co-channel interference creates unwanted signal attenuation

that causes decrease of link quality and speed. Using Sleeve30 Kit with
mANT30 gives 22dB additional selectivity for each mANT30 in a critical
direction, see the picture below. Using Sleeve30 Kits for two mANT30 devices
side by side provides extra 44dB selectivity.
Such improvement allows several mANT30’s + Sleeve30’s to freely work at

one place, at the same channels, without interfering with each other.
Sleeve30 Kit also reduces wind load and protects antenna reflector
and feed from harsh environment, improving PtP link sustainability.
Sleeve30 shell is made of corrosion resistive, lightweight aluminum;

front cover has excellent RF signal transparency.
Product code Sleeve30

Assembled Sleeve30 dimensions 700x700x220mm
Box dimensions 720x715x230mm
Weight netto 2.95 kg
Weight bruto 5.520kg
Box contents aluminum shell, front cover, fasteners, silicone sealant
A
0˚
+80˚ -80˚
119
quickMOUNT
QuickMOUNT is a wall mount adapter for point to point and sector
antennas. You can mount it on the wall or use it as an adapter from large
diameter pole to small size antenna mounting clip ensuring reliable fitment.
The adapter is very durable due to it’s special material composite - anvilNITE
(TM). Three models are available.
The basic model quickMOUNT is for mounting small point to point and sector
antennas. It is possible to simultaneously mount two SXTs, thus creating a
repeater access point or creating large sector coverage.
The advanced model quickMOUNT extra can be used for our long range
heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT
19s. Both quickMOUNT and quickMOUNT extra gives possibility to turn
antenna horizontally within 190°.
The quickMOUNT pro makes it possible to turn antenna within 140° both
in horizontal and vertical plane. With the quickMOUNT pro it is possible to
perfectly set antenna alignment using integrated graduated scale.
quickMOUNTpro
Model quickMOUNT quickMOUNT pro quickMOUNT extra
LHG
Product code QM QMP QMP-LHG QME
Dimensions 96x107.5x56 mm 95x88x112mm 102x135x150mm
Tube diameter 35 mm
Max tube diameter to which
65 mm 70mm
mount can be attached
Maximum antenna weight 1.5 kg 8kg
Maximum wind load 100N
QMP: SXT, Omni-
TIK, other antennas Any pole mounted
SXT series, Omnitik, 3rd party antennasthat
Compatible devices that are designedto antenna with weight
are designed to be pole mounted
be pole mounted under 8kg
QMP-LHG: LHG 5
Turn angle for Mikrotik products 190° 140° 190°
Operational temperature range ±40° C
Material anvilNITE™
Included quickMOUNT, metal ring, K-41 screw kit
Mountingring K-41screwkit
121
R52HnD
The R52HnD is an update to our popular miniPCI wireless card. It
works in either 2.4 or 5GHz and is now even higher power (400mW).
Product code R52HnD

Chipset AR9220
Wireless 2.4 / 5GHz (selectable)
Frequency range 2200-2700 or 4800-6100 MHz
Standards 802.11a/b/g/n
Max output power 400mW
Format miniPCIe
Dimensions 60 x 55 x 7mm
Connectors 2x MMCX
Supported channels 20/40 MHz
Temperature -40°C .. +70°C tested
MAX power consumption 7W
Rate (2.4 GHz) Tx Rx Rate (5 GHz) Tx Rx

1MBit/s 26 -100 6MBit/s 26 -96
11MBit/s 26 -94 54MBit/s 25 -80
6MBit/s 26 -96 MCS0 23 -96
54MBit/s 25 -80 MCS7 21 -78
MCS0 23 -96
MCS7 23 -78
123
R52n-M R52H Wireless miniPCI cards
We are offering wide range of miniPCI wireless cards for
expansions, covering from 2.192GHz up to 6.100GHz, with
output power from 50mW up to 1600mW.
We have a cards that features built-in LED indicators for wireless

mode,connection status (connected, searching, disabled), TX
and RX activity and wireless signal strength - just looking at the
card will help with installation and alignment.
See the tables for more information on specifications.
R5SHPn R2SHPn
Model R5SHPn R2SHPn R52H R52n-M
Chipset Atheros AR9220 Atheros AR9223 Atheros AR5414 Atheros AR9220
Frequency range 4920-6100 4800-6100
4800-6075 2192-2539
(MHz) 2192-2539 2200-2700
Model R5SHPn R2SHPn R52H R52n-M Standards 802.11a/n 802.11b/g/n 802.11a/b/g 802.11a/b/g/n
802.11a RX TX RX TX RX TX RX TX Max output power 800mW 1600mW 316mW 316mW
6Mbit -93 29dBm - - -90 24dBm -97/-95 21dBm Format miniPCI
54Mbit -77 25dBm - - -70 19dBm -80/-79 19dBm 60x60x19mm (incl. 60x60x19mm (incl.
Dimensions 60x45x3mm 60x45x
802.11b RX TX RX TX RX TX RX TX heatsink) heatsink)
1Mbit - - -93 32dBm -92 25dBm -95/-94 23dBm 1x MMCX (single 1x MMCX (single Two U.fl 2 X MMCX
Connectors
chain) chain) connectors Antenna Connector
11Mbit - - -77 30dBm -87 25dBm -92 23dBm
9 LED indicators, 9 LED indicators,
802.11g RX TX RX TX RX TX RX TX Features
ESD protection ESD protection
6Mbit - - -93 32dBm -90 25dBm -95/-94 25dBm
Starting -5ºC to Starting -5ºC to
54Mbit - - -77 29dBm 70 20dBm -80 21dBm +65ºC +65ºC Operating -20ºC to Operating -20ºC to
Temperature
802.11n 2.4GHz RX TX RX TX RX TX RX TX Operating -30ºC to Operating -30ºC to +70ºC +60ºC
MCS0 20MHz - - -93 32dBm - - -95/-94 23dBm +65ºC +65ºC
MCS0 40MHz - - -93 31dBm - - -91 21dBm Up to 10W at maxi- Up to 10W at maxi-
Power consumption 3.5W Max:2.4W
mum power mum power
MCS7 20MHz - - -74 28dBm - - -77 20dBm
MCS7 40MHz - - -72 27dBm - - -74 20dBm
802.11n 5GHz RX TX RX TX RX TX RX TX
MCS0 20MHz -93 28dBm - - - - -97/-95 21/19
MCS0 40MHz -89 29dBm - - - - -93/-91 19
MCS7 20MHz -74 24dBm - - - - -78/-76 16
MCS7 40MHz -71 24dBm - - - - -75/-73 13
125
R11e series
High power wireless cards in miniPCI-e format. Ideally suited for our products
with miniPCIe slots to add another wireless interface.
The card features built-in LED indicators for wireless mode, connection status
(connected, searching, disabled), TX and RX activity and wireless signal
strength - just looking at the card will help with installation and alignment.
Five models are available:

R11e-2HnD (2GHz, uFl connector, small heatsink)
R11e-2HPnD (2GHz, MMCX, high output power, larger heatsink)
R11e-5HnD (5GHz, MMCX, larger heatsink)
R11e-5HacD (5GHz, 802.11ac, MMCX, larger heatsink)
R11e-5HacT (5GHz, 802.11ac, MMCX, triple chain, larger heatsink)
Model 2HnD 2HPnD 5HnD 5HacD 5HacT

Chipset AR9580 QCA9882 QCA9880
Frequency range 2312-2732 MHz 4920-6100MHz
Standards 802.11b/g/n 802.11b/g/n 802.11a/n 802.11ac
Max output power 800mW 1000mW 500mW 630 mW
Format miniPCIe
Connectors 2x uFL 2x MMCX 3x MMCX
Features 9 LED indicators, ESD protection
Supported
20/40MHz 20/40/80MHz
channels
Temperature Starting -5°C to +65°C; Operating -40°C to +70°C
MAX power
5W 7W 5W 4.5W 5W
consumption
TX/RX at MCS0 29dBm / -96dBm 30dBm / -96dBm 26dBm / -96dBm 26dBm / -96dBm 28dBm / -96dBm
TX/RX at MCS7 24dBm / -76dBm 24dBm / -76dBm 23dBm / -76dBm 23dBm / -77dBm 27dBm / -77dBm
TX/RX at 6Mbit 29dBm / -96dBm 30dBm / -96dBm 27dBm / -96dBm 27dBm / -96dBm 28dBm / -96dBm
TX/RX at 54Mbit 24dBm / -80dBm 24dBm / -80dBm 24dBm / -80dBm 23dBm / -81dBm 28dBm / -81dBm
127
48V Gigabit PoE converter
This device lets you use any 48V PoE source (including Passive PoE,
Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.
Simply plug any 48V PoE powered ethernet cable into one port, and
any 8-30V capable RouterBOARD device into the other. This device is
capable to provide high power output - up to 24W (up to 1A at 24V).
You can power it with virtually any 36-57V PoE solutions available on
market today (Passive, Telecom, 802.3af and 802.3at PoE plus
supported)
The device is a rugged metallic design, with high capacity components

and integrated heatsink design. The case also has mounting holes so
you can attach it to a wall.
Ethernet shield pins are inside the Ethernet connectors, so that

shielded ethernet can be used, to ground either at the converter itself,
or at the devices at both ends.
Name RouterBOARD POE-CON-HP

Ethernet Two Gigabit Ethernet ports with grounding pins - one input, one output.
Power Input 36-57V (Passive, Telecom, 802.3af and 802.3at PoE plus supported)
Power Output 24V 1A
Output pins 4,5 “+”; 7,8 “-”
36V
Passive PoE
Telecom PoE 24V
802.3af
802.3at
129
SFP transceivers
To complement our SFP cage equipped devices, several types of SFP
modules are available for the most popular SFP use scenarios.
We currently offer two SFP 1.25G modules, one SFP 1.25G module kit, two
SFP+ 10G modules, one SFP+ 10G module kit, two Direct Attach cable kits
and one SFP to RJ45 fiber to copper module.
Model Specifications
S-85DLC05D 1.25G, 850nm Dual LC connector, 550m, MM, DDMI
S-31DLC20D 1.25G, 1310nm Dual LC connector, 20km, SM, DDMI
S-3553LC20D S-35LC20D:1.25G SM, 20km, T1310nm/R1550nm, LC, DDMI
two module kit S-53LC20D:1.25G SM, 20km, T1550nm/R1310nm, LC, DDMI
S+85DLC03D SFP+ module 10G MM 300m 850nm LC-connector DDMI
S+31DLC10D SFP+ module 10G SM 10km 1310nm LC-connector, DDMI
S+23LC10D: 10G, SM, 10KM, Tx:1270nm Rx:1330nm, LC, DDMI
S+2332LC10D two module kit
S+32LC10D: 10G, SM, 10KM, Tx:1330nm Rx:1270nm, LC, DDMI
S-RJ01 RJ45 SFP 10/100/1000M copper module
S+DA0001 1m, connects two SFP/SFP+ devices
S+DA0003 3m, connect two SFP/SFP+ devices
131
GPON ONT module
The GPON module allows any RouterBOARD device to be used for Fiber to Home
installations without any special modems or software. A plug and play solution means
you simply plug it into your device, and no special configuration is needed. It is
supported by all our SFP products, with any RouterOS version - all configuration will be
done on the ISP side.
This module is a G.984.5 Optical Network Terminal (ONT) with Small Form-factor
Pluggable (SFP) packaging. The module integrates a bi-directional optical transceiver
function and GPON MAC function. By being plugged into the customer premise
equipment (CPE) with standard SFP port directly, the GPON provides an asymmetric
1.244Gbps upstream 2.488 Gbps downstream GPON uplink to the CPE without
requiring separate power supply.
It supports a sophisticated ONT management system, including alarms, provisioning,

DHCP and IGMP functions for a stand-alone IPTV solution at the ONT, Time of Day
and 1PPS interface. The GPON ONU module can be managed from the OLT over the
GPON using G.988 OMCI.
It fits seamlessly into existing communications equipment, providing service providers

with a smooth upgrade to GPON. The GPON solution vastly decreases the installation
costs of deploying fiber access in MDUs and enables service providers to improve their
revenue streams while decreasing OPEX.
Specifications
• Simplex SC Connector, Integrated Diplexer Transceiver
• SFP MSA, digital diagnostics SFF-8472 Compliant
• Compliant to FSAN G.984.5 Specifications
• 1244 Mbps Tx, 2488 Mbps Rx Asymmetric Data Rate
• Operating case temperature: 0~70°C
• Subscriber location identifier (SLID)
• PON Link Status notification
• Dying Gasp notification
• Supports Time of Day and 1PPS interface
• Response the TX power shut-down command from OLT when OLT detect anomaly
• TC Layer GEM encapsulation mode
• OMCI support per ITU-T G.988
• 28 dB link budget; Class B+, 20 km reach
• Compliant to IEC-60825 Class 1 laser diode
• RoHS compliant
• Internal Calibration
133
FTC
The FTC is a Fiber to Copper converter. Unlike many other media
converters available on market, FTC has an outdoor waterproof case
with lock screw. The device supports 12-57V PoE with 802.3af/at
support. Comes with PoE injector and power supply. The case has a
mounting system that is secured by a screw from inside the lockable
case, making the device hard to access by unauthorised people.
• PoE support
• Outdoor fully weather proof wall/pole/din mounting
• Supports 1.25G 1000Base-X fiber to FE/GigE copper
Power 12-57V Passive or 802.3af PoE

Operating temperature -40 to +70C
Ethernet One 10/100/1000Mbit ethernet connector with PoE input support
Dimensions 185x85x30 mm
SFP One 1.25Gbit port (SFP module not included)
135
Flex-guide
super low loss cable assembly
A super low loss RPSMA cable for

superior connection quality, suited for
indoor and outdoor use, this cable
provides superior matching and loss
values.
The name of this cable comes from

combining the words “flexible” and
“waveguide”, to denote the high end
features of this product.
The inner conductor is silver plated

copper, and both connectors are
soldered, not crimped, for the best
possible signal quality. Ideally suited for
our BaseBox and other products with
RPSMA connectors, and works with mo st
antennas.
Trc1 S11 dB Mag 5 dB/ Ref 5 dBCal 1 Trc3 S21 dB Mag 0.02 dB/ Ref -0.54 dB Cal 3 Product order code ACRPSMA
10 M1 5. 17GHz -29.9 27dB -0.44 M1 5. 17 GHz-0. 5 16dB
5 M2 5. 83GHz -28.1 25dB -0.46 M2 5. 83 GHz-0. 5 54dB RPSMA Soldered on both ends
M35. 50 GH z -25.526 dB M35. 50 GHz -0. 553 dB
0 -0.48 Connector type RP-SMA Male (inside thread)
-5 -0.5 Inner conductor Silver plated copper
-10 -0.52 Frequency up to 6 GHz
-15 -0.54 Total signal loss at 6GHz 0.59 (Includes connectors. See chart for details)
-20 -0.56 Matching Better than -20dB
-25 -0.58 Suited for outdoor use
-30 -0.6 Cable length 500mm (19.7″)
-35 -0.62 Outer diameter 4.2mm (0.2″)
-40 -0.64
Ch1 Start 4. 7 GHz Pwr -10 dBm Bw 10kHz Stop 6. 2 GHz Ch1 Start 4. 7 GHz Pwr -10 dBm Bw 10kHz Stop 6. 2 GHz Min. bending radius static 8mm (0.3″)
Min. bending radius repeated 40mm (1.6″)
Operating temperature -55 to 125C
137
Feel free to contact us :
(+99412) 497-66-66
(+99412) 497-66-55
To obtain MikroTik hardware and software, visit our distributors.

For more information and latest news go to
routerboard.com and mikrotik.com

Catalogo Mikrotik

Uploaded by

Copyright:

Available Formats

Catalogo Mikrotik

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Mikrotik

Uploaded by

Copyright:

Available Formats

Why MikroTik?

Reseller, trainer and consultant map

MikroTik provides routing, switching and wireless equipment

We have an extensive network of trained consultants,

Model mANTBox 15s mANTBox 19s

Device mANTBox 15s / mANTBox 19s

RB922 models have miniPCI-e slot for another wireless card.

Product code RB921UAGS-5SHPacT-NM RB921UAGS-5SHPacD-NM RB922UAGS-5HPacT-NM RB922UAGS-5HPacD-NM

RB921UAGS-5SHPacT-NM RB921UAGS-5SHPacD-NM RB922UAGS-5HPacT-NM RB922UAGS-5HPacD-NM

Poweradapter Mountingloops Metalring Gigabit PoEinjector DINmount miniPCIscrews

Product code RB911G-5HPacD

Mountingloops Metalring TX/RX at MCS0 30dBm / -96dBm

Using the optionally available Flexguide cable, you can

• Ideal for long distance point-to-point links

Poweradapter Precisionmount UKit GigabitPoEinjector

The QRT is a rugged outdoor flat panel antenna, with a built in

Three models are available:

Model QRT 5 QRT 2 QRT 5 ac

Precisionmounting Ubolts Poleclamp Screwkit PoweradapterGigabitPoEinjector

24V0.38APoweradapter K-LHGkit 2xmetalrings PoEinjector

Product code SXT 5 ac SXT SA5 ac SXT HG5 ac SXT Lite5 ac

SXTHG5ac RBSXTG-5HPacD RBSXTG-5HPacD-SA RBSXTG-5HPacD-HG RBSXT5HacD2n

Poweradapter Mountingring Polemounting PoEinjector *Supports only 802.11an protocol.

Model SXT 5 SXT Lite5 SXT HG5 SXT SA5

SXT 5 SXT Lite5 SXT HG5 SXT SA5

Poweradapter Mounting ring Polemountingbracket PoEinjector

Complete with a ready to mount enclosure and built-in 10dBi antenna,

Model SXT 2 SXT Lite2

Model SXT LTE

The SEXTANT is a 18dBi 5GHz antenna with a built in RB911 router. It

Product code RBSEXTANTG5HPnD

Product code RBMetal9HPn RBMetal2SHPn RBMetal5SHPn

Poweradapter 2xMountingloops PoEinjector Angled Nconnector 6dBiomniantenna 2xMetalrings

Poweradapter 2xMountingloopsGigabitPoEinjectorAngledNconnectorDualBand2.4/5Ghz 2xMetalrings

Our smallest outdoor series model - a fully featured wireless

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput

CPU AR9342 600Mhz

Omniantenna Poweradapter Mountingloops PoEinjector

Our smallest outdoor series model - a fully featured wireless RouterBOARD

Rate (2.4 GHz) Tx (dBm) Rx (dBm) Rate (5 GHz) Tx (dBm) Rx (dBm)

Omniantenna Poweradapter Mountingloops GigabitPoEinjector

Comes with a mounting loop for tower/pole mounting, and a separate

Model BaseBox 5 BaseBox 2

Model OmniTIK U-5HnD OmniTIK UPA-5HnD

802.11a: –96 dBm @ 6Mbps to -78 dBm @ 54 Mbps

Poweradapter Mountingbracket Metalring PoEinjector

RBOmniTikG-5HacD (International) RBOmniTikPG-5HacD (International)

Rate Tx (dBm) Rx (dBm)

28V2.57Aadapter 24V0.8AAdapter Polemountbracket Metalring GigabitPoE IECcord

Using a dish of up to 100cm in diameter, it is possible to obtain antenna

Rate Tx (dBm) Rx (dBm)

DISC Lite5 (International)

Rate Tx (dBm) Rx (dBm) Antenna type Short backfire

24V0.38AAdapter PoEinjector Metalring

CRS 8 Ethernet port series

Product code CRS109-8G-1S-2HnD-IN CRS210-8G-2S+IN CRS112-8G-4S-IN

CRS210-8G-2S+IN Operating temp. -20°C .. +70°C tested

CRS109-8G-1S-2HnD-IN wireless specifications

Poweradapter microUSBcable Rackmountears